Exported data for research

Similar Questions

• Export data for certain combinations of BSO

  Hi all
  
  I have 1.5 GB of data in OSB and whenever I execute calculations in OSB, there are OSI for the export of the ASO.
  I need to reduce the time of export.
  I found three ways to do this.
  1 calculation script - that has failed so I run it at level 0 for all dimensions (12 dimensions in plan)
  2. script - error of Cartesian product report.
  3 parallel export - enabled DLTHREADSPREPARE option - currently I have to address this as an alternative
  
  Is there a process where I can export only partial data using MAXL script or any other process.
  
  Thanks in advance.
  
  Ravi

  have you tried using the DATAEXPORT command?

• ATG export data using startSQLRepository in CommerceReferenceStore

  Today, I tried to export data for ProfileAdapterRepository using strartSQLRepository for commerceReferenceStore and use the following command.

  startSQLRepository -m CommerceReferenceStore.Store  -export all d:\profile_data.xml  -repository /atg/userprofiling/ProfileAdapterRepository
  

  and the above command works fine.

  But when I tried the below command.

  startSQLRepository -m CommerceReferenceStore.Store.EStore  -export all d:\profile_data.xml  -repository /atg/userprofiling/ProfileAdapterRepository
  

  It throws the error.

  **** info       Sat Feb 22 11:40:51 IST 2014    1393049451776   /atg/commerce/pricing/Promotions        Resolving reference to /atg/commerce/catalog/Produc
  tCatalog
  **** Warning    Sat Feb 22 11:40:52 IST 2014    1393049452658   DistributorSender       No remote servers configured
  **** info       Sat Feb 22 11:40:53 IST 2014    1393049453259   /atg/commerce/pricing/priceLists/PriceLists     SQL Repository startup complete
  **** Error      Sat Feb 22 11:40:53 IST 2014    1393049453440   /atg/commerce/pricing/priceLists/PriceLists     Table 'dcs_price_list' in item-descriptor:
  'priceList' does not exist in a table space accessible by the data source.  DatabaseMetaData.getColumns returns no columns.  Catalog=null Schema=null
  **** Warning    Sat Feb 22 11:40:53 IST 2014    1393049453542   /atg/commerce/pricing/priceLists/PriceLists     atg.adapter.gsa.GSARepository->loadColumnIn
  fo : SQLException in Table.loadColumnInfo.  Trying again.       com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: Table 'production.dcs_price_list
  ' doesn't exist
  **** Warning    Sat Feb 22 11:40:53 IST 2014    1393049453542   /atg/commerce/pricing/priceLists/PriceLists             at sun.reflect.NativeConstructorAcc
  essorImpl.newInstance0(Native Method)
  **** Warning    Sat Feb 22 11:40:53 IST 2014    1393049453542   /atg/commerce/pricing/priceLists/PriceLists             at sun.reflect.NativeConstructorAcc
  essorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  **** Warning    Sat Feb 22 11:40:53 IST 2014    1393049453542   /atg/commerce/pricing/priceLists/PriceLists             at sun.reflect.DelegatingConstructo
  rAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  **** Warning    Sat Feb 22 11:40:53 IST 2014    1393049453542   /atg/commerce/pricing/priceLists/PriceLists             at java.lang.reflect.Constructor.ne
  wInstance(Constructor.java:513)
  

  For both the above command I copied the FakeXADataSource and the JTDataSource in as below.

  FakeXADataSource.properties

  URL=jdbc:mysql://localhost:3306/production
  user=root
  password=root
  driver=com.mysql.jdbc.Driver
  

  and JTDataSource.properties

  $class=atg.service.jdbc.MonitoredDataSource
   dataSource=/atg/dynamo/service/jdbc/FakeXADataSource
   transactionManager=/atg/dynamo/transaction/TransactionManager
  

  
  

  So can you explain twhy I amd not able to export the module data EStore.

  If you need further clarification the on my side the please let me know

  The error:

  Property $class not defined in the configuration for/atg/dynamo/service/jdbc/FakeXADataSource_switchinga

  means that you are missing the key $class in the /FakeXADataSource_switchinga properties file.

  $class = atg.service.jdbc.FakeXADataSource

• Export data then reload

  Hello
  
  I have the such Scenario than real dimension, forecast, Budget, forecast 2, FY10 Budget, etc. I want to export data for only 2 forecasts and Budget FY10, so here is my script:
  
  ESS_LOCALE English_UnitedStates.Latin1@Binary
  SET DATAEXPORTOPTIONS
  {
  DataExportLevel 'all '.
  DataExportColFormat
  WE DataExportDynamicCalc;
  
  
  };
  DIFFICULTY ("FY10 Budget", "Preview 2");
  DATAEXPORT 'File' ',' 'D:\testexport.txt ';
  ENDFIX;
  
  The file is generated, and then erase FY10 Budget and forecasting 2 block and try to load the data in the cube with the same dimensoin, I got error such as:
  
  «Unkonwn Item ["Feb", "Mar", "CalQ1", "Apr"...»
  
  What I'm doing wrong here?
  
  Thank you
  
  Published by: Alain on November 15, 2010 07:50
  
  Published by: Alain on November 15, 2010 07:51

  I feel is my delimiter, I use the comma in my calc script, but it seems it is tab or space, which is the problem here, how can I specify tab or space as the delimiter in my dataexport option?

  ^ ^ ^ I'm not sure that the separator is the issue, but certainly try it. If you put a "" you will get a space as a separator. If you put "" (not really a tab, but must be EAS/editor of your choice I can't tab in the my computer window) you get tab as a delimiter. That's all there is to it. It's a thread from last week - I learn new things all the time on this forum.

  Kind regards

  Cameron Lackpour

• Data export Error exporting data databae

  Hello. IAM getting the error when you export data from database. the error is
  
  "Export data for June 3, 2009 09:41:20 IST failed.
  : Error network 1042013 [10054]: cannot receive data
  "Error: network error 1042012 [10054]: can not send data.
  
  
  Any clue?
  
  Essbase system 9 (9.3.1)
  
  Thank you and best regards,
  Srini

  There are the onl; there both times I was not able to get an export of work
  1. when all the dimensions of the database have been set as sparse. A database apparently needing at least a dense export dimension
  2. If the .pag file was corruption. You can run a database of audit to check this and try to fix it, there are problems

• Export data Page OA for master detail Page

  Hello
  
  Export data from OA Page for master detail regions.
  
  Kind regards

  Hello

  Please use folwing piece of code.

  OAExportBean = expBean
  (OAExportBean) webBean.findChildRecursive ('Export');
  define the exportDetails for this region, master/detail.
  expBean.setExportDetails (oaPageContext, "masterRegionName",
  'detailRegionName', 'masterVuName', 'detailVuName');

  Kind regards
  Out Sharma

• Release date for F30 - 123?

  Sorry if this question has already been asked - I was in a hurry and he couldn't look through the answers I got from my research.
  Does anyone know the release date for the Qosmio F30 - 123, and if it's barely wait rather than buy the F30-111 right now?
  Thank you

  Michael

  Hello

  The Qosmio F30-123 is a very new unit.
  I googled around and found a few sites of Toshiba Netherland with this product.
  It is possible that this laptop you can buy only in Belgium; Luxembourg and the Netherlands.
  F30-123 has a processor T2500 2.0GHz and F30-111 processor T2400 1.83 GHz
  All the features of another should be the same.

  I would recommend to google a bit and I am sure that you will find offers really good.

• Question about exporting data from Virtualbench.

  Hello

  I am new to the forums and VirtualBench and hoped that someone might be able to help.

  When I export data from the VirtualBench, I get 4 columns of data for the 2 channels. They are "1 Min", "1Max", "2 Min", "2Max.

  Example:

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Timestamps (ns)	1 min	1 Max	2 min	Max 2
  -3000600000	-0.205761317	0.12345679	-0.013168724	-0.001646091
  -2990598000	-0.205761317	0.12345679	-0.013168724	-0.003292181
  -2980596000	-0.205761317	0.12345679	-0.013168724	-0.003292181
  -2970594000	-0.205761317	0.12345679	-0.013168724	-0.001646091

  I don't understand what means min/max. I have not any spread. VirtualBench takes in fact several samples at each point?

  Thank you.

  In some places, VirtualBench application will automatically the peak of detection equipment.

  Peak - detect mode, over-samples scope and returns the minutes and the maximum voltage in each period the sample.

  You can manually control the sample mode by going to the settings of acquisition:

  

• export data wave graph problem

  Hi all!

  I have a problem with my table of waveform:

  The length of the history of the chart I updated 5 X 24 X 60 X 60 = 432 000 comments. I draw a new point in all the 1 minute, so that I can preview as the last 5 days. The problem is, when I'm just trying to export to Excel, the data for the chart, the data are not in the order time (if I export the data to the Clipboard, it is all the same). The data starts with the second day. And Yes, before I export data, the x-axis are configured to be autoscaled, so I don't see 5 days together data curves. But after export, in the table opening Excel (2010 office, LabView 2011, silver chart) the data are really mixed upward...

  Anyway, the workaround is simple: 2 clicks in Excel and it puts the data in order, but I'm curious to know why it happens... I guess I'm doing something wrong with the berries of waveform of construction?

  Is this a bug?

  Thanks in advance!

  PS. : I have attached a graphic exported to jpg format what I see, and excel table with "mixed up" sequence of data, as well as the Subvi, that I use to generate and send the three points of the chart made every minute.

  Hey,.

  as far as I know, it was a change in the interface ActiveX of Office 2007 to Office 2010.

  You wouldn't have this bug in Exel 2007.

  Try to use the the VI 'Export waveforms to spreadsheet' or if you use a PDM file.

  Oxford

  Sebastian

• Failure to EXE to EXPORT DATA to THE Clipboard

  LV 2010, Win Vista, Win7.

  A TABLE indicator has a context menu that can EXPORT DATA to the Clipboard.

  In LV2010 (and LV2010 SP1), this function does not work in an executable file - it works very well in the dev system. LV.

  It was fixed in LV 2011, but we can't move to that at the present time.

  What is the best way to take advantage of this feature in LV2010?

  See this JING

  Actually, there is an easier way.  The table has a method called "EXPORT DATA to THE Clipboard".  Apparently, the method is OK, it is not only called on the menu, when in an EXE file. This is a bug of LABVIEW.

  I added only a button called 'EXPORT', an event to respond to a CHANGE OF VALUE on this button and a NŒUD INVOKE to call this method.  It exports very well selected cells.

  Thanks for your idea, if.

• Export data to Excel does not work in the build (.exe)

  I'm new to LabView 2010, but made a small application which works as expected when run as a VI in the Labview environment. This is a simple data acquisition where the results are displayed in a waveform graph. I used the method "Export data to Excel" to present the request to transfer the results on the chart in an Excel file programmatically.

  However, when I build the application and run the exe, the application works very well outside the export to Excel. Excel does not start, and when I right click on the graph for "export data to Excel" manually, it doesn't work anymore. The data can be exported to the Clipboard and then pasted into Excel, which is doable, but not very elegant solution...

  Any thoughts?

  Hi CFNoergaard,

  This issue has been corrected in LabVIEW 2010 SP1.

  If you upgrade to this version, it should do the trick.

• Reference Dell OMSA Release Date for vSphere 6.0 ViB

  Hello

  information about the release dates for vib for vSphere vsphere 6 (OMSA 7.4.1 / 8.0.1 / 8.0.2)

  Apart from that... OMSA 8 will continue in two different development branches for T630, R630, R730, R730xd and T430/R430/T530/R530/M630... or will it be a next single version for all serversystems of 13 G.

  Kind regards

  Torsten

  Toki76,

  Custom Dell ESXi ISO 6.0 came out 2 days ago. So I guess, from past experience, that the VIB is going to be released very soon behind him, but at the moment I do not see that he launched. I can research to see if I can refine the delivery date well and let you know.

  What about OMSA 8, probably a single version which includes the two branches.

• Does anyone have a good experience, export data from cubesavvy?

  Merry Christmas / Happy holidays everyone.

  Does anyone have a good experience, export data from ASO using cubesavvy?

  I tried but the filters don't seem to work.  I entered about 9 filters - with the members and parents to 9 dimensions.  However, the native text file that it created does not seem to use these filters.  I select 'Member = FY15' but it has exported the native file, had FY12.  I think this tool takes the native text file it generates and create a report of the column from it.

  http://www.cubesavvy.com/parse-ASO-export-to-columns/

  We use it because our financial report and the Smartview crashes when we tried to explore the zero level for Dept (we have more than 5 thousand), projects (more than 5,000) and accounts (more than 200).  It looks like a simple report.  Our report EN used to support 20 minutes now it crashes.  We must perhaps compact contour and use the motion tracking.

  R,

  David

  Hi David,

  Harry Gates here, the developer of cubeSavvy. Dozens of people successfully using the export ASO Analyzer feature, with and without filters. This includes a few very large companies with big data and the large contours (100s of exports of GBs and hundreds of thousands of members). If the filters are not limit the written lines, it has been my experience that the names of typical members in do not match those of the file.

  You can reach me at [email protected] if you have any other questions. You can also send me your otl and export, if they are not too sensitive and I'll take a look.

  Kind regards

  Harry

• Is it possible to export data from fields to fill in indesign?

  Just the basics:

  I'm on a mac, running CC

  We are PDF forms where users will type circulating information. Instead of copying and pasting data into indesign, we wanted to see if there was a way to export the data entered directly in indesign? I tried to export data in Excel, but we lack excel for mac 2011 and I wonder if there is a compatibility problem with exports (which must constantly be repaired). I also find that when the files are repaired, that the entire form is included.

  If I can't make a direct export to indesign is there a way I can only export the data to excel and create my own .csv to a data merge in indesign?

  Thank you

  Rich

  Yes, JavaScript is case-sensitive, so the name of a field must be used in the same way, it has been defined in the form. If you have a field named "Field 1", you can not access via "field 1" - these two names is different. ""

• Data loading 10415 failed when you export data to Essbase EPMA app

  Hi Experts,

  Can someone help me solve this issue I am facing FDM 11.1.2.3

  I'm trying to export data to the application Essbase EPMA of FDM

  import and validate worked fine, but when I click on export its failure

  I am getting below error

  Failed to load data

  10415 - data loading errors

  Proceedings of Essbase API: [EssImport] threw code: 1003029 - 1003029

  Encountered in the spreadsheet file (C:\Oracle\Middleware\User_Projects\epmsystem1\EssbaseServer\essbaseserver1\app\Volv formatting

  I have Diemsion members

  1 account

  2 entity

  3 scenario

  4 year

  5. period

  6 regions

  7 products

  8 acquisitions

  9 Servicesline

  10 Functionalunit

  When I click on the button export its failure

  I checked 1 thing more inception. DAT file but this file is empty

  Thanks in advance

  Hello

  Even I was facing the similar problem

  In my case I am loading data to the Application of conventional planning. When all the dimension members are ignored in the mapping for the combination, you try to load the data, and when you click Export, you will get the same message. . DAT empty file is created

  You can check this

  Thank you

  Praveen