Extend an iscsi LUN without losing VM

Similar Questions

• My friend wants to re-establish its MacBook Air can do this without losing all the files on his iPhone?

  My friend wants to re-establish its MacBook Air can do this without losing all of its files on its iPhone, as they are related?

  Two different devices. She is fine as long as she has a full backup. Why she wants to do? Writing an effective communities of Apple Support question.

  Basic steps to follow for a clean install of OS X Lion and later

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• Satellite P300 - 19 H: can I install Linux without losing the warrany?

  Hello

  I'm a french so please forgive me for my bad English.
  I just want to know if it is possible to install Linux on my system without compromising my warranty.

  My laptop is a Toshiba Satellite P300 - 19H
  The current operating system is Vista Premium Home Edition (pre-installation on my laptop)
  I paid for 3 year extended warranty, that's why I want to be sure I can install Linux.

  If it is possible, I have to take certain steps before you try to install it in a Dualboot with Vista?

  Thanks for the reply.

  Post edited by: OxMoZ

  Hello

  You can install Linux without losing the warranty. Toshiba doesn't support Linux on this laptop, but you can install it of course.

  If you want to do a dual boot with Vista and that you are interested in a version of Ubuntu, you should take a look at the Wubi:
  http://wubi-Installer.org/
  It is a sure way to install Ubuntu on laptop with Vista installed.

  Check it!

• How to clean and do a fresh install with attached iscsi LUN?

  I intend to migrate both esx 4.1 with esxi5.1 hosts before you wipe and do a clean install.  Each host is connected to two iscis without, with 4 LUNS of each SAN attached to each host.  Each lun
  spread over 3 degrees is. I plan on vmotion (not storage vmotion) guests from one host to another to make the upgrade.  I'm stuck on the determination of what will happen to the iSCSI LUNS after I
  upgrade to esxi5.1 guests.  It seems that I should just be able to reattach, but I'm not sure.  Can I just attach the LUNS to the new installation 5.1 hosts and see all the
  VMDK intact, or is there something that I am on?

  And should the migrated to another host virtual machine continues to run on the iscsi san, while I upgrade of the host, they were released since then?  It seems that storage must be removed from the process as the LUNS
  should not remain attached to the host after it is cleared and the iqn name no longer exists.

  
  Am that I on the right track here?  What Miss me?

  jackjack2, understand you this? I went ahead and moved to esxi 5.0 U2 of ESX 3.5 u5. Had to perform clean install and I have an iSCSI SAN. That's what I did:

  1 a taken a screenshot from all my ESX host configurations. Go to configuration-> software adapter-> click on the iSCSI--> properties--> iqn copy map and alias-> click the dynamic discovery tab and note any IP address. You may need these IPs with the discovery of data warehouses later.

  2. after having documented the configs, put the host in maintenance mode.

  3. after maintenance, remove the host from the vcenter server. Connect directly to the host and close.

  4. remove all the network cables. Cable marking help before you detach the cables.

  5. clean install esxi 5.0.

  6. after installation, before rebooting, set the network cables.

  7. configure and test the management network. If your network management test fails, see if you have anything that is entered in the id vlan. Chances are that your port is not shared resources in the physical switch. In this case, remove the id vlan (during the configuration management network) work.

  8 bring the vcenter server host.

  9 configure the network, dns, time, etc.

  10 Add a software iSCSI adapter. This card will have a new iqn. Either you provide this iqn to your SAN administrator so that it can update side SAN, or you can use the old iqn name.

  11. in my case, I made a copy of the new iqn and then deleted. Entered the old iqn name obtained in step 1. Additionally, entered the alias (since one was present before). After that, a new analysis and update still does not fill in data warehouses. So, I went to the properties of the iSCSI adapter and then discovered added tab dynamic addresses IP that did not exist before (otherwise, you will need to enter the virtual IP address of the cluster that you data store (s) belong to). Once the IP addresses have been added to the dynamic discovery tab, he asked if I wanted to rescan the HBAs. I said yes and viola! my data stores have been populated.

  12 Add the host to the cluster.

  Note that you can add iSCSI adapter when you affiliate you the host to the cluster. However, in this case HA will not be happy because no heartbeat of data storages will be detected. In addition, when data warehouses are discovered it may appear initially as not mounted. Don't panic. After a minute or two it will be mounted.

  I hope this helps!

• ISCSi LUN Vmware question

  I have two luins iscsi for vmware build hook etc. up to an emc celerra server.

  question-

  If I extend the iscsi on celerra lun in vmware puts it auto-mattically updated space iscsi LUN or is there more steps involved.

  Hello.

  There are more steps involved, after performing the operations on the Celerra.

  Use http://kb.vmware.com/kb/1752 as your starting point.

  Good luck!

• How to connect to iSCSI SAN without compromising security

  Hello:

  How to enable server OSes (VMS or physical host computers) to connect and LUN iSCSI mount without compromising the safety of our ESX host?  We have a few Microsoft servers that need to use iSCSI initiators at Mount MON for MSCS.   We cannot use the ESX initiators because VMware doesn't support iSCSI to virtual storage with MSCS.  We have already read all the documentation and spoke with VMware support, so we know that our only option is to use the iSCSI initiators in Microsoft servers to connect to the LUN.

  Our concern is security.  If we let the servers use their iSCSI initiators to connect to the San, then they also won't have access to our service and the vkernels via the iSCSI network console?  ESX requires that you have a port the service console and the port of vkernel on the iSCSI network for each ESX box that you want to use the ESX initiator for.  We struggle to understand how to connect any machine (virtual or physical) to the iSCSI network to mount LUN without exposing our service and vkernels consoles.  I know that the best practice is to remove this VMs network for this exact reason, but of course many organizations also have physical servers (UNIX, Windows) who need to access their iSCSI SAN.  How people treat this?  How much of a security problem is it?  Is there a way to secure the service console and vkernel ports while allowing host ESX - no access to the SAN?  I know that many of you are facing this exact in your organizations situation, please help.  Obviously, it is not supposed that nobody uses their SAN iSCSI for anything else except for the ESX host.  I thank very you much.

  James

  Hello

  Check out this blog

  Use of firewall is certainly a step in the right direction for that. If you can't have separate iSCSI networks, then you will need to isolate nodes NON-ESX/VCB iSCSI using other mechanisms. I would certainly opt for firewalls or reduce the redundancy to just 2 network-by-network cards and not 4 to a single network.

  Someone at - it any other suggestions? Surely many ESX users share their iSCSI SAN with a lot of different systems and operating systems. Thanks again.

  They do, but they do not secure their networks for their VMs ESX iSCSI / other physical systems. You have asked a very important question and it's how to connect to iSCSI SAN without compromising safety. If the options are currently:

  1. Physically isolate

  2. Isolate using firewall

  Given that ESX speaks in clear text and does not support IPsec for iSCSI, you have very limited options that are available to you. The firewall you use and charge iSCSI, you send through it will determine if there is no latency. Yes its a cost extra, but if it is an independent network switches/ports/etc.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• resize JPEG pic with/without losing sight?

  Hello: Level: Beginner OS: Windows7 64 bit PS: Cs6

  The image below is a (unfortunately), .jpeg and I wish I could change its dimensions from 800 X 600 to 958 x 198

  However, when I use Ctrl + T to change the size (of course), the Sun (especially) becomes an ellipse.

  Is it possible that I can change the dimensions of the image without losing the perspective?

  As perhaps a way to extend the clouds? I read on the clone tool, but it leaves the seams and apart from that it looks like the image belongs on the island of misfit pictures Santas .

  Somehow, maybe what I'm asking is not possible at all, but I thought I'd ask nonetheless. I tried of keywords to the top of the wahzoo in FAQ & forum but have returned empty-handed. So I think that maybe I'm shoot outta luck.

  As always, I appreciate your time and TY for reading my post

  

  Thank you.  You can have this image if this can help you.

  I started with a picture that I had turned of the sun above the clouds (somewhere in my photo library that I took a shot of virtually everything I think) to come.  I painted some red upward with a partially transparent brush, and on a new layer mixed with mixing screen, I drew a big new almost white sun with a big brush partially.  Then, I used one of my own plug-ins to make radial rays on yet another layer, even when mixed with mixing screen.

  I resized and cropped to the right ratio, while doubling the number of pixels you need in each dimension.

  -Christmas

• Can I restore without losing data?

  I don't have my Iphone saved on my computer. I need to get out of a boot loop, but I can't update. Is it possible to restore without losing any of my photos, music, etc.?

  You have a backup of iCloud? Or do you mean that you have no backup at all? Has not created a backup before attempting to update the device? Apple recommend a backup before doing any type of update iOS.

  Without a backup, you will lose data. You can recover from your last backup.

• How to recover a password administrator forgotten without losing data.

  I forgot my admin password on my desktop, a way to reset my password without losing all the data/files?

  Thank you.

  Here are the instructions of change or reset the password of a user account from OS X - Apple support

• How to change the RSS feed without losing subscribers

  I am currently using blubrry to download my podcasts. I'm not the host through them, but rather on my own site and using my feed to send to iTunes (http://racingdudes.com/feed/podcast/). However, I spent to SoundCloud to start my hosting podcasts. I added my last three episodes of the podcast on SoundCloud and they integrated into my website. However, how can I change the RSS feed of my original stream to my new SoundCloud feed without losing all my subscribers and sides?

  My first thought was to connect to iTunes Connect and my current RSS is such a list, swap out for my new. Which will work? Is it that simple? It seems that I read many ways outdated, complicated to do this process just make sure, if this is the newest, easiest way?

  Appreciate your help. Thank you!

  In order to keep your subscribers, you must either add the "itunes: new-feed-url' to the original feed, or launch a redirect 301 on your server: ideally both." These will change to the new food store and also your subscribers will be transparently redirected - they won't even notice. The complete method is explained in detail here: http://wilmut.uk/move

  If you are unable to change the power supply and also cannot implement a 301 redirect, then using Podcasts Connect will redirect the store but not subscribers redirect. In this case, the only option is to include an announcement in the last podcast on old food (you could do a special episode) announcing the change and ask people to re-subscribe from the shop page.

• Can I use the same disc hard ext I used for El Capitan Yosemite without losing my data?

  Can I use the same disc hard ext I used for El Capitan Yosemite without losing my data?

  Yes. You should not lose any data, but always have a backup. In this case, you have your internal drive as a backup.

• How can I re - install firefox without losing my data. It is infested bame ad.

  Firefox is infested with "ads name.

  How can I get rid of it or how can I
  Re-install firefox without losing any data?

  There is a rash that goes around, and the solution is not yet clear 100%. I suggest try reinstalling this way:

  Clean reinstall it

  We use this name, but it is not about the deletion of your settings, it comes to ensure that program files are-own and contain no alien code files. As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 37.0.1 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• How to save pictures of Photos in the form of files without losing the GPS data?

  Hello!

  Can someone advice me in the following cases:

  I want to erase my Photos from iPhone and iMac. Before that, I wish I had pictures of my library of Photos saved as a regular directory with files. As Windows does, for example.

  Can someone tell me how to save all Photos in the form of files without losing the GPS data? Thank you!

  Just export them (File menu) in unmodified versions.

• Two copies of Firefox open. How to close one without losing the lugs on the other.

  Firefox has been slow to open up, so after awhile I clicked on the icon a second time.
  Then two copies opened, one with this page of solution of Mozilla and the other with all the many tabs that I use frequently.
  But when I tried to close the copy of solution of Mozilla, I was warned that the two copies would be closed, I know from
  experience can sometimes cause me to lose all the tabs on my master copy.
  So, how can I safely close a copy without losing the tabs on the other?
  Thank you.
  Dave

  Press Alt to display the Menu bar, and then press F to open the file menu, and then use the menu item close this window .
  Or use the X in the upper right of this window.

• How to convert an email account pop3 to a conversion of imap account on ipad without losing old E-mail running 9.3.2

  I am running iOS 9.3.2 on my iPad 9.7 Pro.  I would like to convert a POP3 server to an IMAP account without losing my old emails.  Any advice would be appreciated. Thank you

  You can not convert a POP IMAP e-mail account unless your provider supports. If they support it, they should have instructions to guide you on how to do it. Contact the support of your Internet access provider.