Facilities by script and the KickStart syntax reference

Similar Questions

• What is the difference between the output of the Script and the result of the query?

  Hello gurus,
  
  In Oracle SQL Developer, during the execution of a select statement running with the "F5 key", I get the output of the Script; And then if I execute the same select statement using 'Ctrl + Enter', I get basically the same data, but it is formatted to be a little different. and using 'Ctrl + Enter' I can adjust and reduce the size of the column (not the logical and physical structure) on the GUI screen to display all columns without having wide apart. What are the advantages/disadvantages to running queries using "F5" or "Ctrl + Enter"? If someone could shed some light on this topic bit, that would be nice.

  HI HAS LUNS,

  Text (f5) is functional, for the better or for the worst dumps select all.
  Chart is prettier - you get a complete data by select grid and scroll within the grid.
  There are a few other minor differences.

  Personally, I use mostly f5 /text/ (sqlplus emulation).

  -Turloch
  Team SQLDeveloper

• How fix crashing when exceed the PDF and the terms of reference?

  I use Frame 8.  When I try my book to PDF, Frame crashes.  I tried PDFing the individual chapters, but that did not work.

  Also, I'm creating a cross reference or hyperlink.  I have a paragraph that says "For more information, see the configuration section in Chapter 1" the section of the configuration in Chapter 1 is a heading 4.  I tried following the instructions using Frame, but I'm not and I don't know if I need a hyperlink or a cross-reference.  I can't more simple explanation and instructions?

  Thank you!

  Several things could be the cause of the crash during the PDF creation process.

  1. have you applied the MS fix mentioned here?

  http://blogs.Adobe.com/TECHCOMM/2009/07/repost_hotfix_for_framemaker.html

  2. in the configuration of your PDF, make sure that you have PDF containing the tag off and in the links Panel, select "Create named Destinations for all paragraphs".

  Try again and also make sure that you have applied all the FM8 patches in sequence.

  You can use either references or hyperlinks to create jumps, although cross-references are easier to make and maintain.

  1. to insert a cross-reference to the Configuration section of Chapter 1, you first need to open Chapter 1 as well as the document on which you are currently working.

  2. in the location where you want to insert the cross-reference, select the special > cross menu option.

  3. for the first time that you use a cross-reference, you create a format for it. In your case the "for more information, see the" and "article in" are constant strings and the name of the section "Configuration" and "Chapter 1" variables are. ".

  (a) click on the button "Edit the Format" in the reference section to the bottom of the window. This will open a new dialogue window allowing you to create a format to use.

  (b) in this window, name the format so that you can identify it easily, such as 'More info in the section of chapter'.

  (c) then you need to enter the line of 'Definition' of what you want the cross-reference to say, that could be (without the quotes) "For more information, see the section of <$paratext>in <$paranum[Chapter]>." Items in brackets are building blocks used by FM to pick up the content of the destination that is specified when you perform the cross reference. The first a <$paratext>States to retrieve the content of the paragraph which you point to (in this case it should be "Setup" title. The <$paranum[Chapter}>item will enter the value tag chapter AutoNumber (or whichever one you have for numbering at the beginning of each chapter of the chapters).

  (d) once you are satisfied with your format, click Add, and then made some buttons. This will save thgis format in the catalog of cross-references.

  4. to actually insert the cross-reference, select the target document (for example chapter 1) in the drop down menu to "document:

  5. then in the Source Type (arrow downwards below the Document), make sure that you have selected paragraphs.

  6. in the left column, you will see the paratags available in the document of the chapter 1.

  7. Select the paratag type that contains the configuration section title (heading 4?).

  8. in the right hand column you should see all the tags heading 4 Chapter 1.

  9. Select the configuration of this column.

  10. check the Format line indicates that you created earlier ("chapter details in the Section"), and then click the Insert button.

  You are finished.

  If you don't like the formatting or he takes the wrong content, then reopen dialogue cross references and change the format to get what you want.

• transition script and the script button do not work together

  Hello
  
  I have been experiementing with actionscripting transitions between the sections... This is the first site I tried it work with (last 3 had swf loaded in one after the other, rather than in fact the transition between). I used a code from kirupa.com, who works for loading movies in and out, but I also have a code for the buttons of my film. I can get one or the other work, but not together, so I guess I'm clash code somewhere, I could do with help please to find what I'm doing wrong...
  
  Code buttons and the call of transition are;
  
  Code:
  MenuBar.B1.onRelease = function() {}
  If (_root.section! = "about.swf") {}
  _root.section = "about.swf";
  _root.transition.gotoAndPlay ("Closing");
  }
  };
  MenuBar.B2.onRelease = function() {}
  If (_root.section! = "portfolio.swf") {}
  _root.section = "portfolio.swf";
  _root.transition.gotoAndPlay ("Closing");
  }
  };
  MenuBar.B3.onRelease = function() {}
  If (_root.section! = "contact.swf") {}
  _root.section = "contact.swf";
  _root.transition.gotoAndPlay ("Closing");
  }
  };
  
  
  and the code that I have on my buttons film;
  Code:
  on {(overview)
  gotoAndPlay ("rollover");
  }
  on (releaseOutside, deployment) {}
  gotoAndPlay ("rollout");
  }
  
  
  Is it possible to combine them?
  
  Thank you. Wayne.

  Here is your file corrected. the only changes are described above:

  http://www.gladstien.com/files/fullfatdesigns.fla

• VI script: get the duplicate element reference

  In the scripts of VI I copy element (any type of indicator, the constant control) with the Move method with the duplicate property - true. The top right Terminal output of the method is the reference to the source, not a new object.

  Is there a simple way to get the reference to that copy (another copy method, etc.)?

  Simple solutions not (they can work on test, but not good examples)

  1) move into temporary cluster - easy to find a new element

  (2) see all before, after and compare lists. But the source VI can be of any size and complexity.

  (3) item Create manually copy: bad, the solution should work on all types of items.

  I would use the method VI create reference in this situation.

• PowerShell script and the Orchestrator

  Hi guys

  We managed to set up the PowerShell script to run a task in the Orchestrator, the only problem is that we cannot pass the input parameter

  $vCOuser = "xxxxxxxx".

  $vCOpass = "zzzzzzzz.

  $vCOparm = "C:\orchestrator\Test.html".

  # Se connect to vCO and generate proxy $vcoWS

  $vcoWS = New-WebServiceProxy - Uri http:// < server >: 8280/vmware-vmo-webcontrol/webservice? WSDL

  # Print the result

  $vcoWS

  # Find Workflow

  $workflow = $vcoWS.getWorkflowsWithName ("create a simple XML document", $vCOuser, $vCOpass)

  # Print the result

  $workflow

  foreach ($element in $workflow)

  {

  $element.id

  #... and run

  $workflowToken = $vcoWS.executeWorkflow ($element.id, $vCOuser, $vCOpass, inParameters)

  # Print the result

  $workflowToken

  }

  Any help would be appreciated

  Hello!

  You can specify an array of WorkflowtokenAttribute objects and pass it to the executeWorkflow method:

  $inparams += New-Object -TypeName VCO.WorkflowTokenAttribute
  $inparams[0].name = "inputString"
  $inparams[0].type = "String"
  $inparams[0].value = "Hello World"
  
  $inparams
  
  # ... and exectue (use $null instead on $inparams if Workflow has no input parameters
  # ... und ausführen
  $workflowToken = $vcoWS.executeWorkflow($workflow.id, "vcoadmin1" , "VMware2010", $inparams)
  $workflowToken
  

  See the complete example here:

  http://www.vcoportal.de/2011/06/updated-calling-VCO-workflows-from-PowerShell/

  http://www.vcoportal.de/examples/PowerShell-VCO/

  Kind regards

  Joerg

• image processor script and the parameter interpolation image (cs3)

  Hi all

  I am using Bridge and Photoshop CS3 (mac) allows to process batches of photos. I discovered the 'Processor of Image' script does take into account the "image interpolation" setting of my general preferences in Photoshop.

  It's very painful, because I can't use 'Of Image Processor' longer, because it produces soft images, where I need sharp ones (my fault for "interpolation of the image" is "Bicubic Sharper".)

  No idea/solution workaround?

  Thank you

  Patrick

  Image processor using Image Fit to do the resizing. That you don't like to use Image adjustment BICUBIC method you can editing this script. Change line 143 of

  app.activeDocument.resizeImage(newWidth, newHeight, resolution, ResampleMethod.BICUBIC);
  

  TO

  app.activeDocument.resizeImage(newWidth, newHeight, resolution, ResampleMethod.BICUBICSHARPER);
  

• script of the child cannot reference the parent script

  Hello

  
  I define a variable (var photo1Show:Boolean = false ;) in the actionscript layer. I have a movie

  component of clip on the scene at this level. I double click on it to open it. This clip has a

  ActionScript layer were I put code "parent.photo1Show = true;". When I test the

  application, I get error:

  
  1119: access of property may be undefined photo1Show a static type reference

  Flash.Display:DisplayObjectContainer.

  
  What's wrong? Also, I'm using Flash CS4.

  
  King

  
  Code snippet
  -----------------------------------------------------------------------
  Parent frame: contains several layers. the two in question are the layer photo and action.

  layer action:

  PREV and next controls navigation botton

  var photo1Show:Boolean = false;
  var photo2Show:Boolean = false;
  var photo3Show:Boolean = false;
  var photo4Show:Boolean = false;
  var photo5Show:Boolean = false;

  Set your captions here
  var caption1 = 'model 1 Poise. "
  var caption2 = '2 model Poise. "
  var caption3 = '3 model Poise. "
  var caption4 = 'Poise of model 4 ';
  var caption5 = "model 5 poise."

  Define the name of the external folder of your photos in large and inches are in

  var galleryFolder:String = 'Nepalese ';

  Thumbs configuration, create instances of charger for every inch

  var pic1ldr:Loader = new Loader();

  ... The rest of the code in this layer is not important

  ------------------------------------------------------------------------------------------ --------

  photo layer:

  Contains the movie clip frame_mc on her diaper.

  I double click thre movie clip object. It contains several layers action, photo1 by photo5

  layers. PHOTO1 photo5 tape contains images, which, unlike keyframes.

  -------------------------------------------------------------

  layer action:

  Stop();
  parent.photo1Show = true;
  parent.photo2Show = false;
  parent.photo3Show = false;
  parent.photo4Show = false;
  parent.photo5Show = false;

  You must cast to the parent as a movieclip:

  MovieClip (parent) .photo1Show = true;

• Basic authentication with the RESTful WEb service and a Web Service reference

  Hi all
  
  We have made significant progress on getting an application to work with RESTful web services, but are now trying to understand how to lock a RESTful Web service while making it available for a particular application.
  
  We use one of the 'emp' table sample web services come with Apex 4.2 and are trying to apply the Basic Auth to the WEb Service using Weblogic filter defined in the web.xml file. Which works very well. I now get challenged when I try to go to:
  
  https://wlogic.edu/Apex/BNR/ACE/HR/empinfo/
  
  And when I authenticate this challenge, I am able to get the data. (we are usiing the Weblogic-level LDAP authentication)
  
  However, I'm not sure how to get even basic authentication to work with Web Service reference in my application. I see the error message in the application when I try to call this Web Service:
  
  401 Unauthorized <
  
  And I see:
  "The request requires user authentication. It MUST contain a header field WWW-Authenticate (section 14.46) containing a fault that is applicable to the requested resource. The client MAY repeat the request with a suitable authorization (section 14.8) header field. If the request already includes identification of the authorization information»
  
  How can I provide the credentials in the Web reference or provide credentials in the Application?
  Web service works fine if I remove the auth basic RESTful web service in the Web.xml file.
  
  We should NOT use basic auth and auth Weblogic web service definition basic RESTful Workspace use instead. If so, how would we implement THIS basic authentication in the definition of Web Service and the Web SErvice reference on the application?
  
  Thank you
  Pat

  Hello Scott,

  Thank you. There is a function for rest in the package:

  function make_rest_request(
  --
  -- This function invokes a RESTful Web service with the supplied name value pairs, body clob, or body blob
  -- the response as an clob.
  --
  -- Arguments:
  --   p_url                  The url endpoint of the Web service
  --   p_http_method          The HTTP Method to use, PUT, POST, GET, HEAD or DELETE
  --   p_username             The username if basic authentication is required for this service
  --   p_password             The password if basic authentication is required for this service
  --   p_proxy_override       The proxy to use for the request
  --   p_body                 The HTTP payload to be sent as clob
  --   p_body_blob            The HTTP payload to be sent as binary blob (ex., posting a file)
  --   p_parm_name            The name of the parameters to be used in name/value pairs
  --   p_parm_value           The value of the paramters to be used in name/value pairs
  --   p_wallet_path          The filesystem path to a wallet if request is https
  --                          ex., file:/usr/home/oracle/WALLETS
  --   p_wallet_pwd           The password to access the wallet
  --
      p_url               in varchar2,
      p_http_method       in varchar2,
      p_username          in varchar2 default null,
      p_password          in varchar2 default null,
      p_proxy_override    in varchar2 default null,
      p_transfer_timeout  in number default 180,
      p_body              in clob default empty_clob(),
      p_body_blob         in blob default empty_blob(),
      p_parm_name         in wwv_flow_global.vc_arr2 default empty_vc_arr,
      p_parm_value        in wwv_flow_global.vc_arr2 default empty_vc_arr,
      p_wallet_path       in varchar2 default null,
      p_wallet_pwd        in varchar2 default null ) return clob;
  

  My point was that using the API makes things easier if you have to look for a solution.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• move the REF to reference

  I'm looking for a grep that reverses the "full stop and the ref to reference ', 'reference ref and full stop.

  (\.)(\s(~F))This code finds it, but when I change to $2$ 1, the reference ref completely disappears and the note itself also.

  An another grep with refs to reference was working when we applied the 'change everything' instead of 'F & C', but this time who does not work either.

  Hi Gert,

  your GREP suggests, the full stop is followed by a white space and which is followed by the reference marker.

  And the result should be that white space more the reference marker is followed by the full stop?

  Try the following ExtendScript script:

  var doc = app.documents[0];
  app.findGrepPreferences = app.changeGrepPreferences = null;
  var myGrepString = "\\.\\s~F";
  app.findGrepPreferences.findWhat = myGrepString;
  var resultTextArray = doc.findGrep();
  
  for(var n=0;n
  Uwe
  		   

• How to run a script using the OMB tcl

  I'm trying to run a tcl script using the following syntax in cmd
  
  D:\app\Username\product\11.1.0\db_2\owb\bin\win32 > ombplus.bat c:\t.tcl
  
  and I get the error
  
  OMB01001: Not connected to the repository.
  
  The tcl script was basically accompanied by a tutorial and I can't continue the OWB tutorial, unless I run it first

  Departure ombplus.bat

  You can then start the script with the source command such as

  source C:/t.tcl
  

  Be careful with the backslash (he is not C:\t.tcl)

  You must also add a connection before your script to OWB with the OMBCONNECT

  OMBCONNECT $UserLogin/$UserPassword@$DBHostName:$DBHostPort:$ServiceName USE REPOSITORY '$RepositoryUser' USE MULTIPLE_USER_MODE
  

  Replace the parameters $ with your own value.

  And then your script, you can disconnect:

  OMBDISCONNECT
  

  Success
  Nico

  Documentation is here for the 11g OMBCOMMAND
  http://download.Oracle.com/docs/CD/B28359_01/OWB.111/b31279/TOC.htm

• Reference pages directory and the directory script

  I have a small question on the reference to an include() file.

  Let's say I'm on a Web page if there is a simple html login form and this page are in the directory called PAGES. The script for this form action is found in a file different ina directory named SCRIPTS.

  The principle, I am trying to understand is:

  If the connection is successful, then the user get access to the site. Now, since the form is located in a directory, but the form script is in another, where is the origin of the link, which will bring the user to the site?  the login page with the shape origin or the script for the original form?

  > even if the user is currently on the form?

  If I understand the workflow you use, the visitor submits the form which is processed by "scripts/login.php". This script has the redirect code - so the url (mainpage.php) location is relative "scripts/login.php". So be, the redirect will fail unless mainpage.php is also in the scripts folder. If you need to enter the relative path of the correct document, or use a relative path from the root or an absolute path.

  Once the user submits the form, they are more "on the form. They are on the page specified in the action of the form - even if there is no html code on this page.

• How can I get the script all the tables and the reference system?

  Hello
  
  I'm trying to get the scripts of all the tables in my exquema MADE. Please can someone help me?

  Try this - the first script creates a 'tab_ddls' table to hold the table DDLS and second script generates the DDL and stores in this "table"tab_ddls ":

  {code}
  create the table tab_ddls (table_name, varchar2 (50))
  table_ddl clob)
  /

  declare
  cursor tab_cur is
  Select table_name
  from all_tables
  where owner = "MADE";
  CLOB table_ddl;
  Start
  for rec in tab_cur
  loop
  Select dbms_metadata.get_ddl ('TABLE', rec.table_name, 'MADE')
  in table_ddl
  Double;
  insert into tab_ddls (rec.table_name, table_ddl) values;
  end loop;
  dbms_output.put_line ('done');
  commit;
  end;
  /

  Select * from tab_ddls
  /

  {code}

  Please modify the script to fit your needs.

  HTH

  Published by: user130038 on August 2, 2011 11:08

• Open the path to reference LV2009 new syntax?

  Hello

  I just changed my LabVIEW 2009 and I have some new problems with open vi reference function. My app uses a lot of Dynamics called vi and some sub-panels too. It works well in the programming system, but not when compiled into a stand-alone executable file (which was not the case in 8.6.1). I found that disorders come roads feeding open vi reference function. Looks like that now it use more full path, including the name of the project or library name... Where can I find the exact syntax to use in these two cases (always for a stand-alone executable):

  -create a reference for the screws that are registered as .vi on disk.
  -create a reference for the vi are encapsulated (using the build properties) in the application .exe file.

  Thank you

  Vincent,

  Please read the following compositions of the help of LabVIEW 2009 "LabVIEW 2009 features and changes" section:

  LabVIEW Application Builder Enhancements
  LabVIEW 2009 includes the following improvements to the LabVIEW Application Builder, which you can access by double-clicking specifications to build in the Project Explorer window and selecting the type of distribution in the context menu that you want to create:

  • The Application Builder won't screw with filenames in conflict outside the stand-alone applications, shared libraries, or Web services for the construction specifications that you create in LabVIEW 2009. In LabVIEW 8.6 and earlier versions, the Application Builder saves files library and screw in a simple list in the application and records the screw with names of conflicting outside of the application files in separate directories.
  • If you build a stand-alone application or library shared by using LabVIEW 2009, the Application Builder stores within the application source files using a layout similar to the directory structure of the source files on the disc. For example, the following table lists the relative paths for a first level VI, foo.vi, which calls a.i and b.vi. C:\.. \Application.exe represents the path to the application.

  Path to the source files path to application files
  C:\Source\foo.VI C:\... \Application.exe\foo.VI
  C:\Source\xxx\a.VI C:\... \Application.exe\xxx\a.VI
  C:\Source\yyy\b.VI C:\... \Application.exe\yyy\b.VI

  To use the legacy file available, place a check in the box use LabVIEW 8.x file layout in the Advanced page of the Application Properties dialog boxes, shared library properties and properties of the Web Service. LabVIEW allows this option by default for the construction specifications that you load a previous version of LabVIEW.

  • (Windows) Specifying build .NET interop assembly allows to create and distribute screws in a LabVIEW project as a .NET interop assemblies. Right click on specifications of generation in the Project Explorer window and select new' Interop Assembly .NET in the context menu to display the .NET Interop Assembly Properties dialog box.
  • Allows the Application to build in the VI dialog box allows you to build an application from the VI you are currently changing.

  hope this helps,

  Norbert

• What is the correct syntax to reference a page point (P23_ID, for example) in a process of PL/SQL page after submit?

  What is the correct syntax to reference a page point (P23_ID, for example) in a process of PL/SQL page after submit?

  TexasApexDeveloper wrote:

  Variable binding is preferred: P23_ID you can also use & P23_ID. (variable substitution notation).

  Bind variable and static text substitution references are not interchangeable. For example, static text substitution references cannot be used in allocation targets:

  :P23_ID  := 'foo';  -- valid
  &P23_ID. := 'bar'; -- syntax error (or something weird or sinister due to SQL injection)
  

  Substituting static text references should be avoided in SQL and PL/SQL code because of the risk of behavior topic SQL injection and / odd error because of values containing quotes, etc.