fact my acer aspire 5750 have a TV to capacity?

Similar Questions

• Acer Aspire 5750 G hard Driver Error 0x00000e9

  Hell everyone! There are a few days accidentally I drop my laptop and after that he start to becomes extremely slow... I tried everything, but a few hours later, I had no access to the window and the message 0x00000e9, again and again! I open bios just to have a look and HARD drive disappeared...

  I contact Acer and told them my problem... After that, I asked what HDD should I expect because I'm not interest in obtaining the same like the old!
  I would like to buy a better one (more RPM. Capacity and Sata 3 ofc) but they told me that I should buy the same thing! :-/

  Can someone tell me what I need to do? For sure the former were not :-(

  My laptop is Acer Aspire 5750 G i7 and the hard driver was Toshiba MK7559GSXP 750 G Sata 2 and Code KH.75004.001

  I would like to know if mobo can support Sata 3
  If I buy a new HARD drive different from what Acer suggest me to or it will be a bad deal for me and my laptop cannot support the new hardware?

  You may have dropped the HARD drive or memory loose when you dropped it. I open the doors on the bottom and check them. I hope it will be as simple as that.

• How can I stabilize my Acer Aspire 5750-9422 keyboard?

  Since I have this laptop with Windows 7 installed, I can't control the cursor movement or keyboard. I turned off the pad and installed a mouse. I adjusted the details slider and mouse in all directions. Yet, too sensitive keyboard and slider eat what I write and pick up parts of words and move them into the text in the wrong place.  It's maddening to try to write anything.  Help, please.

  HI - or even to see this issue resolved? I have the same problem and finds it difficult to find the correct driver. -hb

• Acer Aspire 5750 power question

  Hi all!

  The issue started happening two days ago.  When I try to turn on the laptop, the power led lights up, the fan will start to blow, hard drive will start to spin and then everything suddenly, it turns off.  The screen remains black throughout the process.  All this happens in a period of 3-4 seconds and laptop computer repeat the process four times with attached AC adapter (with only battery attached, laptop once).  It won't start and join the BIOS, the laptop shuts down before that.   I tried several things so far.

  1 ram remove Glue one by one and replacement

  2 tried to remove the batteries and only the execution of the power adapter

  3. past autour where I used only the battery and no power adapter.

  4 taking battery and power adapter off and holding down the power buttong + 30 seconds

  5. Replace hard drive with another hard drive compatible.

  Now, I am at a loss on what to do.  Has anyone else had this type of problem? If anyone can help me, it be so awesome! Thank you in advance!

  Nice day

  You did everything possible... get the motherboard replaced.

  Kind regards

  FReeZA

• Acer ASPIRE 5750g RAM upgrade

  Hello, I have a laptop of Acer ASPIRE 5750 g, and I want to upgrade my RAM (I have 4 GB of RAM, and it supports up to 8 GB). Should what kind of RAM I buy? Thanks in advance.

  Edit: Care: I7-2630QM (2.0 GHz), GeForce GT 540 M, 4 GB DD3 memory installed, running at 1333 MHz

  Yes that's right: your laptop supports up to 8 GB - DDR3 - 1333 MHz (2 x 4 GB - Windows-64 bit).

  Here's a memory compatible module (27EUR per room):

  Kingston and click on where to buy. Maybe you can buy in your online [purchase] Kingston store button.

• Acer Aspire V3 771 G with Ubuntu: no screen initially

  After I installed Lubuntu on my Acer Aspire, I have a little problem.

  After booting, the screen keeps dark and every time I have to click on [Fn] + [>] (brightness upward) see the screen.

  Is there a solution (using sudo bash I think) to get the screen immediately?

  Bart

  Look at this screen brightness Lubuntu. It should point you in the right direction.

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• A number of keys on Acer Aspire have suddenly stopped working.

  Original title: some keys not working not

  I have an acer aspire laptop all at once a number of keys have stopped working the x c. f n?  stopped working.  any ideas?

  Hi Laura,

  1. have you made a recent software or hardware changes to the system?

  2. what Windows operating system do you use?

  Method 1:

  You can try to install the latest version of the drivers from the Acer site and check.

  Support of Acer & downloads

  Method 2:

  You can also check if the FN key is enabled. If so, then try to switch it off.

  Method 3:

  If you still experience the problem, try to activate the on screen keyboard and check if the problem persists.
  Type without using the keyboard (on-screen keyboard)

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• Acer Aspire M1641 Desktop. Rear audio jacks have a 7.1 surround. I need manual for audio jacks.

  

  Above is a close-up photo of the audio input/output jacks on the rear panel of my desktop PC Acer Aspire M1641-E3750A. I think that this configuration is a 7:1 surround sound system. When I access the manual Acer Aspire from the PC itself, it does exactly what is providing the function of a surround sound system. I do not know what the symbols mean audio universal: 'exit' - arrow pointing off wave circle and "input" - arrow pointing in the circle of the wave. The pink jack is the microphone input jack. Blue is the line-in Jack. The Green Jack is for headphones.

  Here are the three problems that I am trying to solve:

  (1) which output jack is what works in a surround sound system?

  Since the Green Jack is for headphones and a surround sound system this output probably of 'Left' and 'Right' would be pregnant before. Is this correct? I suspect that the black upper middle plug is the bass speaker. Is this true? I do not know what role the white and the yellow output sockets are used in this system.

  (2) what is the correct procedure of wiring/connection to connect speakers to the output jacks of?

  I think that ALL the output sheets are mini stereo cards. So, I have attached two speakers from each output as a stereo headphone jack?

  (3) made the PC power attached speakers in the surround sound system? If not, do I have to patch the outputs from the PC via an amplifier and then convert signals to the speakers?

  I apologize for all this detail! Perhaps there is a quick reference that someone could provide a link to a knowledge base. I tried Acer, Wikipedia and other sources, but I can't seem to find answers to these questions.

  Any help is appreciated. Thank you!

  A sound card integrated (such as Realtek) can have multiple uses made.

  outside one pink that is taken for Microphone, others can be used like headphones or speakers (normally the green one).

  If you go to your control panel and double-click the Realtek icon, probably will appear a window with different parameters and can help you understand what makes each output.

  for sure that you need an amplifier, the soundcard of the PC doesn't have enough power to handle a speaker without amplification system.

• Acer Aspire M5 - came with 8 Win. Updated to win 10. Have to reset the PC. He will restore to 8.0 or 10

  Hello.  I have an ACer Aspire M5, which was recently upgraded to Windows 10.  I had a lot of questions, spent countless hours with the support of Microsoft and now I need to reset the computer.  I've lost all my files and programs (all files have been backed up) in the process of troubleshooting with MS, so not too big of a deal.

  Question - when I reset the computer, it switches back to Windows 8 or 10 of Windows?

  Thanks in advance for your comments.

  CK

  If you use the option to reset 10 windows, it returns to windows 10.

• I have ACER Aspire V3 - 574 G - 7198 and I would like to know what size of RAM can handle my motherboard?

  I have ACER Aspire V3 - 574 G - 7198 and I would like to know what size of RAM can handle my motherboard? I know that the my processor can handle up to 16 GB of RAM, now I have installed only 4 GB of RAM (original), but I want to update to 12 GB of RAM. I want to know if my motherboard can handle?

  I have received and read your private message. Yes, you can install 8 GB + 4 GB (current module). They will work at 1600 instead of 800 MHz (single channel). You will see the difference!

  Here are the compatible memory modules:

  • Crucial
  • PNY

  If you have the budget, I recommend buying a set of 16 GB (2x8Gb).

• I have a problem with his Acer Aspire XC - 603 G - UW31 HDMI

  I have an Acer Aspire XC - 603 G-UW31.  The only way I can get HDMI audio when it is connected to the TV is with the default Microsoft drivers. Displys cardas graphics Intel HD graphics Windows.

  Display adapter = Microsoft Basic graphics card

  Sound, video controllers andgame = high definition Audio Device / Realtek High Definition Audio

  I tried every fix I can find on the internet, can not find one that works.  Even several different drivers.

  When I install all driver Intel or any driver on the acer site.  I lose the option for the Digital Audio (HDMI) devices read.

  Have a fix for this.

  Thank you

  Today I updated the Bios and it fixed the problem.

• I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  You can buy or download a copy retail Microsoft windows and install it on your computer.

  You can download and install the device driver windows for your computer to Acer support website.

• Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  Acer Aspire V3 - 772G - BIOS setup utility menus have disappeared

  I have install this laptop brand new, pre-installed with Windows 8.1 for my sister-in-law who bought it.  The installation went well BUT the 16 GB USB device I bought such as advised by the literature of Acer to store the recovery partition was not large enough, 14.4 GB physical capacity.  Acer the book says to use a 16 GB or more, so I did.  I naively thought that a USB key which has been marked 16 GB would be appropriate.  Not the case.  I had to buy a bigger but am still waiting for delivery.

  So I decided to any HARD drive to save the work I had done, but found only the Acronis Backup and Recovery DVD would not start the image.  I went into the utility configuration and adjusted the start parameters to inherited and modified device priority.  Acronis wouldn't so I did not continue.  I went back into the configuration utility, use F9 to restore the default value and to my astonishment that the DUAL boot option was now gone and Windows startup option was also gone.

  This means that £800 this laptop is now unusable.  The installer standalone reconfigured without warning.  Nowhere is there at - it advice or advice do not use the Setup utility when it erases the features that cannot be recovered by using F9 to restore the default configuration.  If this isn't a serious design flaw, I don't know what is.

  I am deeply worried because the idea of a BIOS setup utility behave in this way seems so unlikely that I wonder if anyone will believe me.  How are the Setup utility has been designed to self-harm like this?

  Your suggested action works!  Thank you very much.  You saved my life.

  loungehake