fail to compile the shared library vorbis for BB10

Similar Questions

• How to create the shared library for linux real-time target in labVIEW Windows?

  I use myRIO running linux in real time. In my project, I need to pack some C code, so I tried the node library function call.

  I know that I should use the tools compile cross - compile linux on Eclipse to compile c code in linux .so library. But the problem is that call library function node does not recognize the .so file because my labVIEW runs on a Windows PC.

  What should I do to fix and how to combine C code with labVIEW during programming for devices shipped as myRIO?

  Basically, you must also create a Windows DLL that exports the same functions. These functions can be empty stubs if you do not want to run the code correctly on Windows, otherwise you will need to consider how to implement the equivalent functionality on the Windows API.

  Then you can write in your node library call as the name of the library ". "*" and the name of the shared library Windows ".dll" while the Linux version is called "name of your library > .so". LabVIEW will replace the * after the comma in the name of library with everything that is the preferred extension shared library for the platform it is running on and therefore load the right shared library.

  Alternatively you can wrap call all the nodes of the library in a structure that contains the node library in the case of Linux RT and all what you want to run on other platforms in the case of default or a case of specific platform, call the conditional compilation.

• Warning message about the shared library file

  I got this warning message when I try to open the sample xml configuration.

  C:\Program NIUninstaller Instruments\LabVIEW reference (Impl) 8.6\vi.lib\xml\Close .vi (NI_XML.lvlib: Close Reference (Impl) .vi)
  -The shared library should happen to "": \addons\internet\dom\DOMUserDefRef.dll "has been charged with"DOMUserDefRef.dll"."
  C:\Program NIUninstaller Instruments\LabVIEW .vi reference (NdList) 8.6\vi.lib\xml\Close (NI_XML.lvlib: Close Reference (NdList) .vi)
  -The shared library should happen to "": \addons\internet\dom\DOMUserDefRef.dll "has been charged with"DOMUserDefRef.dll"."
  C:\Program NIUninstaller Instruments\LabVIEW .vi reference (NNMap) 8.6\vi.lib\xml\Close (NI_XML.lvlib: Close Reference (NNMap) .vi)
  -The shared library should happen to "": \addons\internet\dom\DOMUserDefRef.dll "has been charged with"DOMUserDefRef.dll"."
  C:\Program NIUninstaller Instruments\LabVIEW reference (node) 8.6\vi.lib\xml\Close .vi (NI_XML.lvlib: Close Reference (Node) .vi)
  -The shared library should happen to "": \addons\internet\dom\DOMUserDefRef.dll "has been charged with"DOMUserDefRef.dll"."
  C:\Program NIUninstaller Instruments\LabVIEW 8.6\vi.lib\xml\Get Child.vi first non-text (NI_XML.lvlib:Get first non-text Child.vi)
  -The shared library should happen to "": \addons\internet\dom\DOMUserDefRef.dll "has been charged with"DOMUserDefRef.dll"."
  C:\Program NIUninstaller Instruments\LabVIEW 8.6\vi.lib\xml\Get Sibling.vi non-text next (NI_XML.lvlib:Get next non-text Sibling.vi)
  -The shared library should happen to "": \addons\internet\dom\DOMUserDefRef.dll "has been charged with"DOMUserDefRef.dll"."
  C:\Program NIUninstaller Instruments\LabVIEW 8.6\vi.lib\xml\Get text Content.vi (NI_XML.lvlib:Get text Content.vi node) node
  -The shared library should happen to "": \addons\internet\dom\DOMUserDefRef.dll "has been charged with"DOMUserDefRef.dll"."
  C:\Program NIUninstaller Instruments\LabVIEW 8.6\vi.lib\xml\Load XML File.vi (NI_XML.lvlib:Load XML File.vi)
  -The shared library should happen to "": \addons\internet\dom\DOMUserDefRef.dll "has been charged with"DOMUserDefRef.dll"."
  C:\Program NIUninstaller Instruments\LabVIEW 8.6\vi.lib\xml\New.vi (NI_XML.lvlib:New.vi)
  -The shared library should happen to "": \addons\internet\dom\DOMUserDefRef.dll "has been charged with"DOMUserDefRef.dll"."

  I've recently updated to 8.6 and I try to compile an executable, but b/c of this warning my executable is not running sends me weird errors. I took the code that calls the XML that is read, and it is fixed. How should I do? Thank you!

  I get this error message when I tried to run the .exe with the xml configuration reader.

  "The application failed to start because xerces - c_2_7.dll was not found. Reinstalling the application may fix this problem. »

• Unable to load the shared library nilvce.*

  When you try to deploy a Labview 2009 real-time application, I get the message:

  Deployment XDNodeRunTimeDep.lvlib:loadnilvce.viXDNodeRunTimeDep.lvlib:loadnilvce.vi loaded with errors on the target and was closed.

  LabVIEW: Unable to load the shared library nilvce. *: niLVCtrlEngineReserveProc:C on the target RT device.
  Completed with errors of deployment

  I reformatted the CRIO-9073 and reinstalled the software, but this did not help.

  Any ideas on how to solve this problem?

  I was able to solve this problem by changing the settings in a timed loop Structure.

  The Source Type has been set to "synchronize in the scan engine.  This change to the problem solved 1 kHz clock source.

  This vi was initially written for the interface of the scan engine and reused on another project that uses the FPGA interface.

• Error message "unable to load the shared library.

  I try to get my programs for school to work, and I get these error message whenever I try to run anything. The last line of the State of deployment is as follows:

  Deployment time get NLVSim and isAcceptedStep.vi IsAcceptedStep.vi and NILVSim get busy with errors on the target and has been closed.

  LabVIEW: Unable to load the shared library NILVSim.*: SIM_GetTimeAndIsAccepted:C. make sure the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.

  I tried everything I can think of to fix this. I checked NEITHER Max and I'm all for date on the software. I reinstalled LabVIEW twice, and I reset my myRIO. My classmates do not experience problems with getting theres to work. I start to lose hope and hope someone might know what the question. Thank you for your help.

  WubaDee,

  NILVSim is part of the LV Control Design and Simulation Module. This one is correctly installed on your Windows development system and you installed it on your myRIO?

  Norbert

• How to include the shared library of BlackBerry in a native extension WebWorks

  I developed a native extension WebWorks that works very well on Simulator and devices when included in a webworks app.

  I also have a sample of waterfalls project with the same code base that I use to test the WebWorks extension code.

  Since a large part of the code is reusable, I decided to create a shared library of BlackBerry, so I can reuse in other projects. When I include the NEW shared library in the waterfalls and then everything works well, as before.

  When I include it in the extension WebWorks it draws very well. The .so file size was much smaller and that worried me (I suspected that the shared library was not included in there). But since its construction very well I went trying to run my application webworks. When it came to hitting the extension I got a ' need of error. Cannot find the library of blah/blah/...so'.

  I had this before and found out that it was because the dependent QT libraries have not been correctly referenced. It so that the shared library is not properly referenced/copied /-thing... This event is supported? For example, by using a custom in a WebWorks extension shared library?

  It worked

  Version 2 is almost right

  In the library paths pane Add...

  ${workspace_loc: / / extlibs/device$ {ProjName}}

  for peripheral and do Simulator

  ${workspace_loc: / / extlibs/Simulator of ${ProjName}}

  Always with libname in libraries

  I just linked to unrar successfully like this library

  Whew - they do this hard work of stuff

• 836: failed to create the shared memory data, error 22 store segment

  Hi, I am new to timesten and databases in general, and I'm testing the database timesten to test.
  
  I am running ubuntu linux in virtualbox and have java 6 is installed. So far, I installed the timesten database and configured the sys.odbc.ini to create a new database. However, it seems that I can't connect to a database.
  
  I connect with the orattadmin of the user (which belongs to groups both timesten and ttadmin)
  
  I run the commandes./ttenv.sh and I have the classpath for ttjdbc6.jar in it.
  then I run le./ttisql.sh, and when I try to connect to mydatabase or any other database present in the sample folder I get:
  
  $. / ttisql
  
  Copyright (c) 1996-2011, Oracle. All rights reserved.
  Type? or 'aid' help, type "exit" to leave the ttIsql.
  
  
  Command > Connect "dsn = mytest_ttdb";
  836: failed to create the shared memory data, error 22 store segment
  The command failed.
  
  what I am doing wrong? What can I do?
  
  Thanks for your time

  A data store active TimesTen consists of a single shared memory segment allocated from o/s. The size of this segment is PermSize + TempSize + LogBufMB + ~ 20 MB. This allowance will not allow the o/s unless the 'package' kernel parameter has a value greater than the requested size of the segment. According to the Guide of Installation TimesTen, you set various parameters of the kernel on the appropriate values (memory shared, semaphores, etc.).

  Chris

• Failed to add the shared member

  Hello
  I get the following error message when I'm loading members at my request of essbase. I chose option 'Allow duplicate Shared Members'.
  Any suggestions to fix this please (without renaming shared members)?
  
  Error message: failed to add the shared member (CM): a duplicate member is in outline, but it is in another dimension.
  
  Concerning
  
  Chandra

  You can only add members with the name or alias from another dimension, even if the names of the members in double is enabled. I do not recommend this. This problem often arises because you have the same name in several dimensions. Like other having to product and customer and division. We generally get around it by prefixing or suffixing the names in a dimension with something like prod others, cust-other, div-others. Pourriez you either prefix the entire generation by using the prefix option in the rule of load or for some names of members by using the option to replace the rule of lod

• I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

  I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

  This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

  I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

  Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

• Unable to load the shared library LVASPT_WA.*

  Hello

  I have a hope that easy to fix the error: I want to use the function "WA Detrend' to the signal processing tool advanced in a real-time application running on a cRio 9030. When I try to run the VI I get the following error:

  ...

  Deployment NI_AdvSigProcWA.lvlib:WA decimation Filter.vi

  NI_AdvSigProcWA.lvlib:WA decimation Filter.vi loaded with errors on the target and was closed.
  LabVIEW: Unable to load the shared library LVASPT_WA.*ptDecimationFilterH:C. make sure that the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.

  ...

  I reinstalled signals Advanced processing toolkit and linked things 'add new software' MAX, but the error persists.

  A picture of what the system looks like to the MAX is attached.

  Also, I Fund this post:

  http://forums.NI.com/T5/LabVIEW/problem-error-deploying-item-on-RT/m-p/3201345/highlight/true#M92822...

  could someone tell me what he means by "Please check the installation of the custom software all mode '?

  Can you telll me what I am doing wrong?

  Thank you very much in advance!

  I ran your situation in R & D, and the problem seems to be as a result of Advanced Signal Processing Toolkit is not not compatible on the x 64 under Linux RT OS in the 9030.  The product page could be clearer on this gap.  I am currently a web application to get this fixed!

  Best,

  David

• Deploy the shared library in WebLogic by EPCO

  Hello
  
  I'm deploying in WebLogic 10.0 an EAR file as a shared library.
  
  I am able to deploy using the server administration Console, but if I deploy the EAR by EPCO, the EAR is always deployed as an Application.
  
  Is it possible to deploy with EPCO as shared library? I declare the EAR as a shared library in any file descriptor before?
  
  Thank you
  Carles.

  If you save your shared library of the EAR in the preferences under WebLogic-> shared libraries then refer to this library in an application, EPCO will deploy the shared library when the listing application is deployed.

  -Konstantin

• tables as input for the shared library function

  I played with the call of LV VI using matlab.

  So I built a simple VI which returns an integer as input and multiply it by 10, I then put in a shared library and named it MATLAB - well.

  Now, I tried to do the same thing with a table - I want to send a picture to the VI and multiplied it by 10, but when I build the .h file, it seems that the function expects get table of entry AND exit of table as inputs.

  so, how I can build a shared library VI who gets an array (of a constant size if this is important) and multiply it by 10?

  Thank you!

  A function in a DLL can only return a scalar value, not a table, no matter what languages are used. To return an array, instead calling it allocates the array pass a reference to the DLL and then after the function called the referenced table table contains the new data. This is why there are two parameters - the input array (actually a pointer to it) and a pointer (reference) to the output array. You must change your code in MATLAB, there is nothing you can do about it in LabVIEW. EDIT: Also note that it allows to re-use of the input as an output table, optionally passing a reference only to the table of entry and then by changing that. You can do it in LabVIEW by configuring the setting table as input and output.

• Failed to load a shared library

  I'm trying to build and debug an example simple stunts of application (eg. Tabs pane) in Momentics 2.1.1 beta.

  First of all, I had a lot of unaccounted or inclusions synax error I solved all... now, no error in the editor.

  However, while doing a generation clean I get these error in CDT build console.

  F:\bbndk\host_10_3_0_2702\win32\x86\usr\bin\ntoarm-ld: caveat: liblgmon.so.1, need to F:/bbndk/target_10_3_0_698/qnx6/armle-v7/usr/lib/libbbcascades.so, not found (try using - rpath-rpath-link)
  F:\bbndk\host_10_3_0_2702\win32\x86\usr\bin\ntoarm-ld: caveat: libcounters.so.1, need to F:/bbndk/target_10_3_0_698/qnx6/armle-v7/usr/lib/libbbcascades.so, not found (try using - rpath-rpath-link)
  F:\bbndk\host_10_3_0_2702\win32\x86\usr\bin\ntoarm-ld: caveat: libforensics.so.1, need to F:/bbndk/target_10_3_0_698/qnx6/armle-v7/usr/lib/libbbcascades.so, not found (try using - rpath-rpath-link)

  It nevertheless compiles and works perfectly if the start mode is run but when debugging is selected as the mode of launch, it throws errors following 4-5 sec apart (sometimes 10 sec).

  On one of the debug consoles.
  WARNING: do not load symbols of shared library for 3 libraries, for example base/lib/liblgmon.so.1.
  Use the command "info launch" to see the complete list.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the proc/boot/img_codec_png.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the base/usr/lib/graphics/omap4470/libusc.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the base/usr/lib/graphics/omap4470/libsrv_um.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the base/usr/lib/graphics/omap4470/libpvr2d.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the base/usr/lib/graphics/omap4470/libIMGegl.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the base/usr/lib/graphics/omap4470/wsegl-screen.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the base/usr/lib/graphics/omap4470/libImgGLESv2.so symbol.
  You need 'set solib-search-path' or 'set sysroot?

  On another console debug

  QML debugging is enabled. Use it only in a safe environment!
  Cascade server was able to start - exit application
  ResourceManager: Window controller has not been initialized by trying to resolve assets.
  Unable to solve "/ main.qml".

  The screen is Virgin throught... and app suspends. If I try to take it back, he just leaves

  Can anyone help please me... if you need more information please let me know.

  8.1 Windows 64 bit

  Momentics 2.1.1 beta

  Blackberry Z10 STL100-1 device

  You can abandon the automatic symbol loading shared libraries. Choose edit configuration, go to the section of debugger, then tab shared libraries. It uncheck the box for "load symbols automatically shared libraries.

• Ant fails to compile the modules that use the interfaces

  Hi, I have a major problem to compile flex with ANT modules.

  I'll try to give ALL the necessary information, so we can avoid unnecessary questions novice days.

  I have an application that uses a lot of modules.  They compile perfectly in flash builder.

  First question.  How can I get flashbuilder 4.7 to show me the command line that he uses for mxmlc?  If I could see it, I could do it all myself.

  Second question: what is the problem with my work below?

  I have a module that looks like this:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:Module ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  Implements = "com. Hof.lobby.modules.IVolatileAssets ".

  Width = "400" height = "300".

  creationComplete = "onDummy (event)" "

  >

  Inside this module, I have several other properties that are themselves instances of type various other interfaces.

  When I build the main application, all right.

  I created a macrodef of ANT to build all my modules effectively.

  < name macrodef = "buildModule" >

  < attribute name = "module name" default = "none" / >

  < attribute name = "module-package" default = "none" / >

  < attribute name = "out-path" default = "'." / > "

  < sequence >

  < echo message = "building @{module-name} for @{out-path}/@{module-name}.swf" / >} "

  "< file="${APP_ROOT}/src/@{module-package}/@{module-name}.mxml mxmlc ".

  output="${DEPLOY_DIR}/@{out-path}/@{module-name}.swf".

  Keep-generated-actionscript = "false".

  incremental = "false".

  Debug = 'true '.

  fork = "true".

  external load-trainees = "${ANT_ROOT}" / link - report.xml ' "

  optimize = "false".

  >

  < filename="${FLEX_HOME}/frameworks/flex-config.xml"/ load-config >

  < path-element source-path = "${FLEX_HOME} / frameworks" / >

  < compile .library-path dir = "${HOF_COMMON_ROOT}" append = "true" >

  < name = 'bin' / >

  < / compile .library-path >

  < compile .library-path dir = "${APP_ROOT} ' append ="true">

  < name = 'java' / >

  < / compile .library-path >

  < compile .library-path dir = "${FLEX_HOME} ' / managers ' append ="true">"

  < name = 'java' / >

  "" < name = "... /bundles/ {local}" / >

  < / compile .library-path >

  < path-element source-path = "${APP_ROOT} / src/locale / {local}" / >

  < / mxmlc >

  < / sequential >

  < / macrodef >

  < target name = "modulesDebug" depends = "lobbyDependencies" description = "Building the Hall modules for debug" >

  <!-< buildModule-module = module package "InboxDlg" name = "com/hof/Hall/modules/dlgs" off-path = "modules3/dlgs" / >-->

  < buildModule-name of the module = module package 'VolatileAssets' = ' com/hof/Hall/modules' off-path = "modules3" / >

  < / target >

  Then, when I run this goal, I get the following result:

  modulesDebug:

  [echo] building modules3/VolatileAssets.swf VolatileAssets

  [mxmlc] F:\var\sdk\flex_sdk_4.5.1.21328A\frameworks\flex-config.xml configuration file

  [mxmlc] F:\var\projects\hof\svn2.---.com\lobby\branches\3.1.39.0\src\com\hof\lobby\modules\Vola tileAssets.mxml(-1): Error: IVolatileAssets Interface was not found.

  [mxmlc] <? XML version = "1.0" encoding = "utf-8"? >

  BUILD FAILED

  F:\var\projects\hof\svn2.---.com\lobby\branches\3.1.39.0\build.XML:98: The following error occurred during the execution of this line:

  F:\var\projects\hof\svn2.---.com\lobby\branches\3.1.39.0\build.XML:51: mxmlc task impossible.

  Total time: 7 seconds

  If I remove the implements attribute in the definition of the module component, then I get a failure cascaded to EVERY SINGLE interface in the module.

  Basically something is causing ANT to fail to load the def for ANY interface class in the module.

  What on earth am I doing wrong?

  Help, please.

  Thank you.

  I answer my own thread because I absolutely HATE when I see a message with the problem I have and no response.

  Here is the answer to the problem:

  I had to create an external configuration file and load it with

  the content of ModuleConfig.xml re - defines almost every configuration framework.  None of them seem to non-standard for me...

  Basically I defined just to be what it SHOULD be and responsible for the config file after I applied the default flex - config.xml in the SDK.

  do what I posted below and it will work.

  so now my macrodef is:

  output="${DEPLOY_DIR}/@{out-path}/@{module-name}.swf".

  Keep-generated-actionscript = "false".

  incremental = "true".

  Debug="@{debug}.

  fork = "true".

  optimize = "false".

  Size-Report="${basedir}/Reports/@{module-Name}-size_report. XML ".

  >

  and my ModuleConfig file:

  http://www.Adobe.com/2006/flex-config">

  fake

  true

  flash.fonts.JREFontManager

  flash.fonts.BatikFontManager

  flash.fonts.AFEFontManager

  flash.fonts.CFFFontManager

  ${basedir} / src/locale / {local}

  ${basedir} / src

  true

  ${FLEX_HOME}frameworks/themes/Spark/spark.css

  http://ns.Adobe.com/MXML/2009

  ${FLEX_HOME} frames/mxml-2009 - manifest.xml

  Library://ns.Adobe.com/Flex/spark

  Frames/spark - manifest.xml ${FLEX_HOME}

  Library://ns.Adobe.com/Flex/MX

  Frames/mx - manifest.xml ${FLEX_HOME}

  http://www.Adobe.com/2006/MXML

  Frames/mxml - manifest.xml ${FLEX_HOME}

  Managers or the locale ${FLEX_HOME} / {local}

  ${FLEX_HOME}frameworks/libs/rpc.swc

  ${FLEX_HOME}frameworks/libs/osmf.swc

  ${FLEX_HOME}frameworks/libs/spark.swc

  ${FLEX_HOME}frameworks/libs/charts.swc

  ${FLEX_HOME}frameworks/libs/framework.swc

  ${FLEX_HOME}frameworks/libs/spark_dmv.swc

  ${FLEX_HOME}frameworks/libs/sparkskins.swc

  ${FLEX_HOME}frameworks/libs/textLayout.swc

  ${FLEX_HOME}frameworks/libs/advancedgrids.swc

  ${FLEX_HOME}frameworks/libs/authoringsupport.swc

  ${FLEX_HOME}frameworks/libs/flash-integration.swc

  ${FLEX_HOME}frameworks/libs/mx/mx.swc

  -owners libs - redacted-

  ${FLEX_HOME}frameworks/libs/player/10.2/playerglobal.swc

  en_US

  es_ES

  en_US

  IT_IT

  10.2

  11

  fake

  ${FLEX_HOME}frameworks/libs/framework.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/framework_4.5.1.21489.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  framework_4.5.1.21489.SWZ

  ${FLEX_HOME}frameworks/libs/textLayout.swc

  http://fpdownload.Adobe.com/pub/SWZ/tlf/2.0.0.232/textLayout_2.0.0.232.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  textLayout_2.0.0.232.swz

  ${FLEX_HOME}frameworks/libs/osmf.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/osmf_1.0.0.16316.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  osmf_1.0.0.16316.SWZ

  ${FLEX_HOME}frameworks/libs/spark.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/spark_4.5.1.21489.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  spark_4.5.1.21489.SWZ

  ${FLEX_HOME}frameworks/libs/sparkskins.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/sparkskins_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  sparkskins_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/rpc.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/rpc_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  rpc_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/charts.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/charts_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  charts_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/spark_dmv.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/spark_dmv_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  spark_dmv_4.5.1.21328.SWZ

  ${FLEX_HOME}frameworks/libs/mx/mx.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/MX_4.5.1.21489.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  MX_4.5.1.21489.SWZ

  ${FLEX_HOME}frameworks/libs/advancedgrids.swc

  http://fpdownload.Adobe.com/pub/SWZ/Flex/4.5.1.21328/advancedgrids_4.5.1.21328.SWZ

  http://fpdownload.Adobe.com/pub/SWZ/crossdomain.XML

  advancedgrids_4.5.1.21328.SWZ

  ${APP_ROOT}/src/@{module-package}/@{module-name}.mxml

  ${DEPLOY_DIR}/@{out-path}/@{module-name}.swf

• run the shared library

  Hello.

  I use the same library 'food' (which contains apple.swf, orange.swf etc.) for ten different games.

  I don't check the box of shared library of the run time of the export.

  The ten games import food.swf to use its assets.

  I thought that the download of food.swf once then it has been cached, so it would be always local IE: why would it be beneficial to have used the run-time shared library.

  See you soon

  Are you talking about RSL symbol in the Flash IDE?

  If yes - symbol RSL have nothing to do with the RSL application. Symbol RSL is creation environment RSL - they asasets shared between the FLAs - sovereign wealth funds.

  RSL from the point of view of sovereign wealth funds is different story.

  Say, you have the food class. You also have Classes Orange, Apple, nuts that extend the food class. And each of these sublcasses have their own orange.swf, the apple.swf, the walnut.swf SWF.

  You can compile these expanses swf on a regular basis, when they do not share their class super foods. In this case, a copy of food class will be in all the three sovereigns. Thus, all three are also much heavier as flood class is.

  But if you use RSL - you compile food in any of them. You compile food into main SWF that loads of these three rulers extended so that these sovereign wealth funds use one copy that is in the main SWF. The three subclasses are lighter because they have no class of food in sovereign wealth funds.

  In other words, orange, Apple and nuts SWFs are useless on their own unless they are loaded into the main application.

  RSL is not only on the loading of the efficiencies, but also on the deployment and maintainability.

  Suppose you discover a bug in the class of food or make changes that are not related to these three subclasses. If you do not use RSL - you'll need to recompile all three. With RSL, you just need to recompile only main swf.