Failed to load application instance publishLive/live.

Similar Questions

• ESPN3 replays fail to load, but the events live OK. I tried to reinstall FF15, FF12, Flash plugin. Nothing works. In IE live and replays loading.

  The problem started 2 days ago, when ESPN3 replay events stopped loading. Reading seems to be loading but never finishes although the events live do not load. I was running FF15 with the latest version of the Flash plugin. I uninstalled and then reinstalled FF and Flash same problem. Then I tried FF12 reinstalled same problem. Internet Explorer 32-bit loads both live and replay the events. Help, please.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• I have a 'Hamachi' program and I can not open it, get the error message "failed to load configuration Hamachi. The application will now exit.

  I have a 'hamachi' program and I can't open it. I am traing and he says "failed to load configuration Hamachi. The application will now exit"what I have to do to make this program work?

  Original title: help with HAMACHI!

  I suggest you try here for support.

  http://help.LogMeIn.com/?product=lmihamachi2&lang=en

• My creative cloud application fails to load, error code 2.

  My creative cloud application fails to load, error code 2. All my apps work fine, is the creative cloud app in the top bar which will not load, it just says: «get help» Any ideas?

  Hi Patrick,

  Please see this KB document for solution 2 Creative Cloud Desktop app update failed error Code.

  Kind regards

  Nicos

• Notes the failure of load application on IOS 10

  Note to failed to load the application on IOS 10, Iphone SE. Help, please!

  Try going into settings > iCloud > toggle Notes power button to see if that could help.

• I uninstalled Firefox on my computer, then I reinstalled and tried to run, but this message appeared, "failed to load your Firefox profile,"

  I uninstalled Firefox on my computer, then I reinstalled and tried to run, but this message appeared, "failed to load your Firefox profile. It may be missing or inaccessible"and Firefox does not open.

  I tried press windows key + R on my computer and open %appdata%\Mozilla\ - and rename the folder labeled "Firefox", but he said that "the action cannot be complete because the folder or the file that is open in another program" I didn't open it and try to restart the pc, but still no help

  A likely cause is a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.

  • Windows: %AppData%\Mozilla\Firefox\
    C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • Linux: ~/.mozilla/firefox/
  • Mac: ~/Library/Application Support/Firefox /.

  You can use one of them to make the Creation/use of a new default profile for Firefox:

  • Remove the profiles.ini file to force Firefox to create a new default profile
  • Use the Profile Manager to create a new profile
  • Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Windows fails to load, the loading screen bar after installed KB2479628 _

  Windows fails to load once installed KB2479628, my Dell BIOS boots then the loading loading bar continuously scrolls. After now the power button for 5 seconds and re-start the computer, Startup Repair tries to run and need to use system restore to properly initialize.

  I uninstalled the update and disabled for windows updates won't install the update on its own.

  • Never had a failure of the before update.
  • running a dell inspiron e1705
  • V8.0.6 IE / Win Vista SP2a

  Research on the update, it seems that KB2479628 is very important. Is there a reason that my system is not compatible with it?

  [1] [of Spybot's Tea Timer is] Enabled

  [2] I was running AVG previos version and previous version of Comodo until the current version of Comodo conflicted with AVG...

  A1. Please disable the Tea Timer of Spybot and leave this option unchecked for now. See http://aumha.net/viewtopic.php?f=26&t=32409

  NB: If you don't fully understand what Tea Timer does and how it does, leave it off in a way permanent.

  A2. Comodo Internet Security includes an antivirus application. You should NOT have more than one 1 installed anti-virus application & loading at startup. You tell me that you used to have Comodo Internet Security (antivirus, antispyware, firewall) AND AVG Free anti-virus installed at the same time?

  PS: Let us a favor & edit your first post above: replace KB2479268 KB2479628typos. Thank you!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows update fails to load: Win Xp

  Windows XP, SP3 on a Latitude D410

  After repair and update Windows Installer 4.5, Windows Updater would not be responsible.  REF. KB 943144: not exactly the same question, but made 2 method with no luck.  Click Update MS, starts IE8, after 3 or 4 minutes get a "Try MS update today" page, click Start now, get review license page, click on continue.  After awhile looong, get the following dialog box: «the files required to use microsoft update are registered or installed...» ' Select 'register or install for me now. ' Click on continue.  Go to next page: "Download and install latest software update."   The download begins.  After another long period of time "Try MS update today" page reappears and can repeat the same process with no luck.

  From the journal of the Updater:

  Report: Initialization of static data to report *.
  2010-03-22 1812 340 report 19:32:20:078 * OS Version = 5.1.2600.3.0.65792
  2010-03-22 19:32:20:093 1812 340 report WARNING: failed to load information from Win32_ComputerSystem reporting with hr = 80040154.
  2010-03-22 19:32:20:093 1812 340 report WARNING: cannot load Win32_BiosProperties information with hr = 80040154 reports.
  2010-03-22 1812 340 report 19:32:20:093 * locale 1033 = ID
  2010-03-22 19:40:10:703 3452 be8 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2010-03-22 19:40:10:703 3452 be8 Misc = process: C:\Program may Explorer\IEXPLORE. EXE
  2010-03-22 19:40:10:703 3452 be8 Misc = Module: C:\WINDOWS\system32\wuapi.dll
  2010-03-22 19:40:10:703 3452 be8 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-03-22 19:40:10:703 3452 be8 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-03-22 19:42:11:843 3452 be8 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-03-22 19:42:11:843 3452 be8 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-03-22 19:44:11:843 3096 dcc Misc

  Also ran the method 1 and 2 in KB 946413 and tried to install/running the Parser MS recommended in this KB.  No luck.

  Note: Should then repair Windows Installer, run the Windows Cleanup utility installer.  Reinstalled MS Office 2003 and I tried to update, highlighting the problem of Win Update.  No problem with installation/update with other applications package.

  In addition, disabled 3rd part firewall and anti-virus during several tests.

  Any help would be appreciated.

  Some ideas at the moment, but can you advise at least that there are specific forums for Windows XP.

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  BTW, it's too late for a restoration of the system when everything worked correctly?

  You have a backup image that you can restore?

  Article on the Windows Firewall if you are interested: http://support.microsoft.com/default.aspx/kb/875357?p=1

  TaurArian [MVP] 2005-2010 - Update Services

• Half-life 2 says failed to load the Launcher DLL specified module could not be found

  Failed to load the Launcher DLL:

  the specified module could not be found

  Hi Madoo17,

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  1. Once you get this error message?

  2. it worked before?

  3 did you changes to the computer before the show?

  Perform the steps:

  Method 1:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Step 1:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Method 2: Use the (SFC) System File Checker tool.

  SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Hope this information helps. Please reply back with the State so that we can help you.

• Run-time error '372': failed to load control 'ctlRowInput' while trying to run "Nexus 2.0."

  Title: Runtime error ' 372': failed to load control 'ctlRowInput' of.  Your version is perhaps obsolete.  Make sure you use the version of the control that was provided with the application.

  I tried to download an updated version of the fire behavior prediction software, "Nexus 2.0."  The program downloaded straight, but the software does not work.

  Hello

  -You are aware of any changes made on the computer before this problem?
   
  Method 1: I suggest you to uninstall and reinstall the program in clean boot mode, and check if the problem persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  Method 2: I suggest you to contact Nexus support for assistance.
  http://www.fire.org/index.php?option=com_frontpage&Itemid=1
   
  Hope this information helps.

• Microsoft Picture It 7.0 "failed to load object, please run set up.

  I have Microsoft Picture It 7.0.  I can't open it all a sudden.  Don't know what has changed.  I got suddenly "failed to load object, please run set up" when I try to open it.  I saw a question/post from joel January 3, 2011, but I can't do what is suggested in this answer.  Please help me solve this problem.

  Hello

  I suggest to try to uninstall and reinstall the application and check to see if it helps:

  http://support.Microsoft.com/kb/307895

  It will be useful.

• Error - app fails to load (forcefield.exe) error 0xc000034 to start Windows XP.

  Original title: 0cx000034.

  Windows xp pro. all KB (130 or almost). I've stalled zonealarm 9-3-037-000 and is unable to contact the update server. I have this problem at the start of this application fails to load (forcefield.exe) error 0xc000034, press (x) to continue. Za tech has the slightest idea why. Technical support told me to do evervthing, I does not. They never say why I get error at startup. W the dose the average of the error and how to fix

  Hi Ray,

  It seems that ZoneAlarm has not installed correctly.

  I recommend you to uninstall ZoneAlarm completely using the removal tool and check if the problem persists.

  Subsequently, you can re - install software ZoneAlarm .

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Security updates fail to load, but continue to ask Permission

  To: Community of Microsoft

  FROM: Michael Dale Smith, Statesboro, GA

  RE: security updates fail to load, but continue to ask Permission

  DATE: 4 April 2014

  1 security updates for Windows Vista and the defender could not load

  last month.  Thus, every day I see a yellow exclaimation point in

  the lower left corner (Start button) telling me to "install updates and then

  stop your computer. »

  2. checking of my update history I learned that keep not updated

  to load.  How to load?

  Respectfully,.

  Michael Dale Smith

  Moved from Vista to install, upgrade and activate Forum.

  Under Windows category select Windows Update.  You can get live help.

  http://support.Microsoft.com/AllProducts

• Failed to load the user profile on my laptop. Help

  I can't connect my laptop as his watch the above message, it is 2 years and a half old and isa an inspiron 1525, helps, I know I need to re boot, but as I am not too good with the system and was looking to find out where to download a disc and make sure that I get the right one can someone help me. in my library now wiyh a ubs if I need.

  Next time please post the error message in its entirety... verbatim.

  What is the real error message?...

  Failed to load the user profile and the user profile service does not log

  If Yes, read on...

  You haveanother admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and newdo a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to restore the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• User files Service does not have this logon user failed to load profile and MS Office programs won't load

  I have two problems which I think are related.

  Please note that my OS is Vista Home Premium

  1. when I disabledUAC, I can load the MS Office programs successfully in both of my administrator accounts.

  2 when I have this OPTION enabled, I can load the administrator account that was installed when I reinstalled Vista.

  The other Admin account comes up with a message "the file of user Service has not this logon user failed to load the profile.

  In addition, when I have UAC turned on I can't open any of my MS Office programs, such as MS Word: "Microsoft Word has not been installed for the current user. Please run Setup to install the application.

  When I turn off UAC, I can access my second Admin account, and I can open MS Office programs in both accounts.

  I tried the MS Fixit tool, run checkdsk and sfc/scannow, restarted my computer and threw a brick at her.

  Your advice is appreciated,

  Hasiel1234

  Hi hasiel1234,

  1. what Microsoft fixit tool ran on the computer?

  2. the problem only occurs with Microsoft word application?

  3. using the Microsoft office 2002 application?

  We do not recommend disabling user (UAC) on the computer access control because it prevents unauthorized computer changes.

  I suggest that you enable the user (UAC) on the computer access control and try the steps and check them off below if it helps.

  Method 1

  See the link below and try the steps mentioned them, check if it works.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Method 2

  See the below Microsoft article and try the steps mentioned, check if it works.

  Error message "Microsoft Word has not been installed for the current user" in Word 2002

  http://support.Microsoft.com/kb/322206

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.