Failed to open application error "Application not found".

Similar Questions

• g drive doesn't open - application not found error

  my g drive does not open. When I click on it it shows application not found error... If I change the drive letter of the drive works normally. but I want the drive should work with the letter g

  Hi Tejaschaudhari,

  Is the G drive an external drive or an internal hard drive?

  The drive letter is already allocated, so you may not assigned the same name of the drive and the drive.
  I suggest you to run the disk check.

  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Windows Firewall and Security Center will not be open - Application not found

  When I right click on my computer then properties, I get an error message "Application not found c:/windows\system32\rundl32.exe.

  In Control Panel, when I click on the Security center and windows firewall, I get the same thing.

  In the past, when I click on the above, the properties come with several tabs and the info on my computer and the firewall came to show if it is on or off.

  I recently downloaded by Comcast Norton Security Suite. I don't know if this happened before or after that.

  Also, I had something like 'XP Active something' burst by saying I had someone trying to hack into my computer and I might have a virus and run a scan now that I did. He came in saying that a list of things have been found and set up a page where I can buy protection for $59.99 per year. I did that and I who sold his to run a scan with Norton. It showed that she had blocked a Trojan horse and had several blocks of attempts to access my computer.

  Can someone please tell me what to do? I am not very computer English savvy, so simple and clear please.

  Thank you!

  Hi, it seems that you have an infection of malicious software on your computer, the best way is to run the Security Scanner

  just to go to http://safety.live.com and run a full scan service.

  Info on how to make it work just watch this tutorial

  http://www.YouTube.com/watch?v=NgH43lmxl-Y

  answer please if you have a problem

• svhost error: this application has failed to start because xul.dll not found. Reinstalling the application may fix this problem

  I got a message when I reboot my pc
  «svhost error: this application has failed to start because xul.dll not found.» Reinstalling the application may fix this problem.
  I need someone to help solve this problem.

  Let's see...

  I downloaded this zip file to see what was in it.  The version of the file in this download link xul.dll is approximately 2 years and version 1.9.0.14

  The version of the xul.dll of Firefox on my system (trying to keep up-to-date and all) is aged two weeks and version 5.0.

  I think I want to reinstall Firefox, but this isn't the Firefox forum.

• C:Windows/system32/rundll32.exe - Application not found - OK__I get this error message when you try to open a program

  Error messages occur now - seem to appear now, after I did a Defrag.  If I try to open AOL, it brings me to a display list who wants to choose from a list of programs.  For AOL, I click on AOL.  I didn't used to have to select from a list of display.  Then I tried to open an Astrology program and it took me to the same list, which of course is not.  Now, I get the same error as follows: C:Windows/system32/rundll32.exe - Application not found - OK

  Here's a Plan:

  Goto, start system restore restore Menu\All Programs\Accessories\System Tools\System

  Now select the oldest Restore Point and restore your computer, but first make sure that you have an external drive.

  After that C:\Windows\System32\Rundll32.exe copy the external drive and the disc is ejected

  Open the system restore and undo restore

  After the undo operation is copy the Rundll32.exe in the road to C:\Windows\System32

  and the problem solved

  Note: the rundll32.exe should be missed recently and you should have an old Restore Point which contains a file Rundll32.exe Intact

• Incoming email links will not open and display error "Application not found" notice how restore all links?

  I tried all kinds of ways to fix this infuriating error without success.  This reference that appears displays a red icon circle, with a white cross on it and the caption reads "Application not found" the previous emails that were at the time received all OK and links could be opened, but now, even those who have the same problem Suggestions would be welcome

  Eric

  Thanks for the comments.

  I'm glad it helped.

  see you soon,

  Steve

• Application not found error-choose the program you want to use to open this file

  Soon all the world.

  I really hope that someone will post a reply to my question as soon as possible. I will try to be as descriptive as I could possibly, in order to solve my problems.

  The main problem is that I can't open some, if all the program files, applications on my windows 7, 32-bit laptop. I'm constantnly get application not found error, showing in a small window address, I was trying to do. Whenever I want to open a program, like the Adobe reader, word of microsoft, excel, mozilla firefox, google chrome - basically everthing, a window opens and is telling me this: choose the program you want to use to open this file: file: acad.exe... and recommend me acrobat from adobe program, any program I was trying to enter (in this case autoCAD).

  Cannot open cmd, when I go to system recovery, it says: System Restore could not start. I normally post records in: C and: D sheet music, play music, watch videos and see photos. I found a "hole" not being able to go to the internet via a browser. I discovered it when I went to an online help in some of the trobleshoots. It would open tab in google chrome by itself and then on it, I can browse the internet normally, but only through the said track.

  Currently, the microsoft security essentials performs a custom analysis (: C and: D), because I suspect it is a malware, or some kind of virus. It happened when I tried to download a program from CAD Solidworks 2012 via a site that I'm not sure I'm allowed to mention, that I don't want. Unless it's okay with you :) It begins with a letter t. By the way, I noticed that my: partition D has accumulated 10 GB + more in the space of a few days, because I remember two weeks ago I had close to 70 GB of free space, now it's about 56.3 GB. Curious, because I know that I did nothing so great in this period. Maybe I need to tell you that I get this window, from time to time, when I browse the internet (I never visit suspicious sites, or at least I don't me remember more I visited one in a very long time, like 4-5 months):

  [url=http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002]http://canadaalltax.com/z/?f=pjrKrjr7vTw8qi5FrTxXrjr4qdgHqjrHqE%3D%3D&eid=727&hid=15769845847361013151&pid=0&ch=666&rf=http%3A%2F%2Fwww.boldride.com%2Fbrand%2Fwilliams-racing&s=px.pluginh&r=0.13960388134319002[/url]

  I found this in my story, be very careful what you do with this link, I don't want that take you anything ;)

  That's on my side, please ask anything and everything, I'll visit this page when I can.

  Good bye!

  P.S. forgot to mention that when I download a program (mozilla Firefox), I can not run it due to: Application not found. I hope I found the right place for it.

  Original title: Windows 7 - Application not found. A big problem or easy-peasy?

  Hello

  Thanks for posting your query in Microsoft Community.

  1. What is the complete error message you get when opening a file?
  2. What happens when you try to open the command prompt?
  3. What happens when you try to access the internet by using Internet Explorer?
  4. You did changes to the computer before the show?

  According to the description of problem errors you get "application not found error" and "choose the program you want to use to open this file" and not being is not able to do system restore, it seems that some windows file is corrupted. I also suggest you to post back the results of analysis.

  I would suggest trying the following methods and check if this is useful:

  Method 1:  Run SFC scan and check for corrupted Windows files and violations of integrity.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Method 2:

  For any question, where his prompting you to select the default program
  Try to set the default values for the program
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-in/Windows/change-default-programs#1TC=Windows-7

  For any question, where you are not able to download and install firefox, download the file and save it and then try to install firefox.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.

• Receive error message: \Tempory Internet Files\Content.IE5 application not found, trying to open the compressed programs.

  Original title: \Tempory Internet Files\Content.IE5 application not found

  Trying to open the program zipped have WinZip installed.

  Get this or a similar message: C:\Users\David J Lewis\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\name of the program

  Help, please.

  Hi David,

  1. are you trying to open the file using open with and choose Winzip?

  2. have you already download the file using Internet Explorer?

  3. what version of Windows operating system do you use?

  This can occur if the location of the temporary file is missing or damaged.

  If you have downloaded the file, and then try to re - download it again by changing the location to download the file and see if it helps.

  You can also try to save the file on the desktop and check if you can open the same without any problem.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot open applications, applications not found

  Original title: Windows XP - application not found

  Original title: Hi everyone

  I inserted a USB as my avira said that there is no virus, but after I used the usb, suddenly I can not run my application and found that the file of the application is now an EXE file and whenever I try to open it, open box appeard saying dialogue and save the file , sfter I save the file and try to run it, it goes back again to the opening dialog... when I look for the folder options, folder files were missing. When I open the properties of the computer, its lack, and I discovered that the registry editor is missing... now the entire application, whenever I open it, it says application not found. Tips than me that I have to do the window set up again unfortunately requires cd rom, and I do not have cd rom... don't you think that I have the choice more to recover everything, don't you think not that the solution is to have a repair on my window and reformat?

  Hello

  1. What happen exactly when you try to open the applications?

  2. you receive an error message?

  3. this happens with all applications you are trying to open?

  Method 1:

  You can try to start the computer in safe mode with networking and check the issue in the clean boot state.

  Step 1:

  You can start the computer in safe mode with network. See the following article to start the computer in safe mode with network.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Step 2:

  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: when you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.

  Method 2:

  Try to scan your computer with the Microsoft Safety Scanner and check.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.

  Method 3:

  You can check the question in the new user account. Consult the following links.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

  It will be useful.

• Application not found Error Messages

  Application not found error message Hi,.

  I recently had a virus on my Windows XP which I removed with Norton Internet Security.  The virus was called "XP Antispyware 2010".  After that I took it with the version of Norton Internet Security 2010 newly installed, I realize that I could not access the internet directly by clicking on the icon. a window will open asking for me to choose the program I want to use to open IE.  He would then run the program but nothing happens and it goes in circles asking to select a program to open, run, etc.

  Soon I noticed that clicking on other applications would result in an error message saying "Application not found".  I can't remove programs from my control panel because it is inaccessible, I can't open Microsoft Office programs directly unless I go to my computer.  I can't do a system recovery or restoration; the same messages will pop up. So basically, I can't make any changes to my laptop programs or access directly.  Help, please.

  I called Symantec who tried to help.  Norton Internet Security has been removed from my laptop, but I still have the same problems.  I was then told that this isn't a problem with Norton, but with Windows and the file sharing/accessibility.

  Help, please.

  Thank you

  Hi, Debbie.

  First of all, Norton is not the choice of the antivirus, I recommend, and I seriously doubt that he removed all, if any, elements of Xp Antispyware 2012. Their support is not much better that you will probably notice now.

  The errors that you receive are obviously the result of the malware.

  We will try to solve your problems one at a time.

  Using another computer, and then transfer the files to the computer in question via revovable storage like a disk or flash/thumb drive click HERE. Download the file. Extract the contents of the zip file.

  Click HERE and download another zip file, extract the contents again.

  Right-click on the files one at a time of course and choose "merge". Confirm guests. You should now be able to open your shortcuts and executable files.

  Click HERE. Download Malwarebytes. Update Malwarebytes and perform a scan.  Choose whether to remove anything found. Once completed click HERE and download Superantispyware Portable. Perform a quick scan again remove anything found.

• Cannot run Real Player. "This application has failed to start because MSVCP90.dll not found. Reinstall the application may fix the problem.

  I'm unable to launch Real Player. I get a message saying that, ""this application has failed to start because MSVCP90.dll not found. " Reinstall the application may fix the problem. I did play several times in past three days, but to no avail. "I even installed the" install Microsoft Visual C++ Redistributable Package in 2010. as suggested by Joel S-Support Engineer at one of the similar Querys. I I am facing the same problem even after installing, so! The same dll missing or damaged.

  I even started recovery deleted files dll in the registry by using strange solutions on the Web "Recuva" but it is of no use.  I do not know! I even started thinking of reformatting the hard drive or changing into a new One.  It's very frustrating. Lately no Fortunately, I hit to the top of your site looking for answers! I'm still fumbling for answers!

  Kindly help me! I anticipate a quick recovery solution please!  Thanks Roy

  Hi Roykarnataka,
   
  MSVCP90.dll errors might indicate a problem of registry, a virus or malware problem, or even a hardware failure.
   
  Scan the checker (SFC) system files on your computer and check if it helps fix the problem.
   

  SFC analyzes and verifies the versions of all protected system files after you restart your computer.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  More information is available at: (sfc) System File Checker

• When I try to open the Control Panel, add or remove programs, a window appears saying "C:Windows\system32\rundll32.exe Application not found.

  Original title: rundll.exe error

  I checked the previous messages and can't seem to find a solution to this problem.  Recently I ran 3 different scans, i.e. sbybot, avast and Malawarebytes virus. After that I ran these anti-virus programs and remove viruses, I was not able to open any more virus scanners. Every time I tried, would open a window saying "Choose the program you want to use to open this file." If I try to download a new virus scanner, it says the same thing.

  When I try to open the Control Panel, add or remove programs, a window appears saying "C:Windows\system32\rundll32.exe Application not found. I checked this file on my c: drive\system 32 and see the rundll.exe file. I also copy and pasted the file rundll.exe my CD of Windows XP in c: Windows\System32

  Everything else seems to work fine on my computer, and I get no message on the rundll.exe file when the computer starts up first.

  Any help would be popular!

  Hello

  You rename regedit.exe regedit.com?

  Remove from my computer-> tools-> file-> option-> view tickmark for "Hide extension for known file types"-> ok-online local disk now C:\WINDOWS\

  Regedit.exe search

  Make a right-click Rename regedit.com

  From start-> Run Type & -> regedit.com-> ok.

  and follow the registry path IE: HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command

  I hope this helps.

• STOP: c0000135 {Unable to locate component} __This application failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  I have a problem with my laptop which comes to hang. Bluie screen.
  the screen show:
  STOP: c0000135 {Unable to locate component}
  This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  In my opinion, is due when I have T.V. Media installed on your computer. I try to use the safe mode and select disable it the automatic restart on system failure option and press ENTER. But nothing works. I have all the time the blue screen with winserv wasn't written. I try to have access to have access to safe mode or something to download, because I try to download criticism 885523 update that I download on a USB key.

  Please this drive crazy me I need your help

  You receive a "Stop: c0000135" and "winsrv was not found" error message after you install Windows XP Service Pack 2

  http://support.Microsoft.com/kb/885523

  S.Sengupta Media Center MVP

• This application has failed to start because cscdll.dll not found.

  I have windows XP and you get an error cela "application failed to start because cscdll.dll not found, re install this application may fix this problem" the file is in a folder update, but not in the folder winsys how can I move this dll successfully?

  You must extract or expand these dll files, more than likely. Here is the procedure:

  Go to start, run and type cmd in the text box. Click OK.

  At the command prompt, type in the following:

  Expand 'path to the dll to move file'\cscdll.dl_ %systemroot% \system32\cscdll.dll

  Where exactly is the dll that you want to move? Can you browse it and copy the address in the address bar? I might be able to help you.

• This application has failed to start because WS2_32.dll not found.

  Whenever I try to open any program I get this message: this application has failed to start because WS2_32.dll not found. How can I reinstall this Application? I have Windows Vista.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  If this happens in Microsoft Zoo Tycoon, then I suggest you to see the link below: http://support.microsoft.com/kb/323941

  Hope this information is useful.