Failure of disk hard A10 and replacement - using recovery disks?

Similar Questions

• Find and replace using wildcards

  I have inserted the contents of table using Insert/Table/Insert tabular data objects in DWCS3 and you want to remove the table insert unwanted code.

  Example:

  < td width =156 valign = top style = "width: 117.0pt;" border-top: none; border-left:
  None; border-bottom: solid windowtext 1.0pt; border-right: solid windowtext 1.0pt;
  MSO-border-top-alt: solid windowtext .5pt; MSO-border-left-alt: solid windowtext .5pt;
  MSO-border-alt: solid windowtext .5pt; background: #FF8A50; padding: 0 cm 0 cm 5.4pt 5.4pt' > < class = MsoNormal p > < span style ='mso-bookmark: CurrentPosition' > < span
  style = "size are: 10.0pt;" make family:Arial'>

  The text between "width" and "Arial" "" varies but these two words start and end are the same in each case be replaced - how can I find and replace using a regex wildcard?  Did some research on the web, but not yet to come through response.  I thought it would be simple and I hope that it is, and I'm just having a shock. Is this something like Find: "< td [^" "] * > and replace it with:"< td > "?  Am I close?

  I would be grateful to anyone who helps and thank you in advance for your time.

  You may be able to resolve this issue with the commands > Clean Up Word HTML.

  However, the following regular expression should also do what you are looking for (do a first backup). Put this in the search field:

  ()
  

  Put this in the field replace:

  $1$2
  

  Select "use regular expression.

• I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik

  I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik

  Only thing you can do is to let die and then hold the home button when you plug it into your computer to put it in recovery mode.

  Actually if the phone is on and that you have an icloud account, you can delete it at distance of icloud.com

  Go to find my iphone and erase the phone.

• Reinstall Windows XP Home Edition 2007, version 5.1 (Build 2600.xpsp_sp3_gdr.101209 - 1647: Service Pack 3) after the failure of the hard drive and without operating system installation CD?

  I was using an old computer and now I have a new and I want to give the former to my nephew, but I want to wipe the hard drive completely clean, in order to get rid of personal information. I don't have the CD of Windows XP OS came with the computer. After the failure of the hard drive, how can I recover 2007 Windows XP Home Edition Service Pack 3? The computer that I'm talking about is 9 years old and is a Toshiba Satellite 1415-S173.

  Hi Bobby Collas,.
   
  You must have a copy of the installation CD without which you can not re - install the OS again.
   
  If it were an Original Equipment Manufacturer (OEM) installation, you can restore the factory settings. Contact the manufacturer to do the same.
   

• Change HARD drive can always use recovery disk to reinstall Windows?

  I have a HP dv7-4296nr, partition recovery and recovery disks. Now, I want to change the current HARD drive to the new HARD drive. But I wonderring after I change the HARD drive, can I use the restore disc I burned before reinstalling windows?

  Hello

  Yes you can.  Your existing set of recovery disks will not only install the operating system on the new hard drive, but will also reinstall all of the original software that came with your laptop as well as re - create the Partition D of recovery on the new drive.

  Kind regards

  DP - K

• Find and replace using behaviors

  I used search and replace in CS3 to add HTML code that includes a behavior of DW. The behavior opens a popup message when clicked.
  
  Find and replace works and adding the behavior code correctly. However, when I save the page and then click on the link to test the behavior, the popup does not appear.
  
  The only way I can get the behavior to work properly must complete the find and replace, double-click to open the behavior of the Tag group, close the behavior and then save the page again.
  
  Is this a problem of DW or I do something wrong?
  
  
  
  

  have you also added all necessary css or javascript on pages so files?

• RESOLVED: Understand regular expressions in search and replace - use it to replace everything between two comments

  I solved this by using the following regular expression in find DW and replace dialogue, it will be all the html on several lines between two specified comments:
  
  <!-NameofStartingComment--(.| \s)*?--NameofEndingComment-->)
  
  
  
  
  Hello
  
  I have structured my site in dreamweaver with each page between the comments section:
  
  <! - navBarStart - >
  HTML here
  <! - naveBarEnd - >
  
  I used this method because I wanted to be able to easily use the find and replace dialogue with regular expressions to update pieces of code throughout my site. However, I have real problems finding the correct regular expression to use.
  
  So in every page I have my <! - startHtmlSection - > <!-endHtmlSection-> between these two tags, I sometimes have different HTML. I want to find the regular expression I could use 'generic' of all the html to a find a replacement between two of my comments specified. Can anyone help? I googled and tried everything what is obvious (after you have selected the regular expressions in the find and Replace dialog) but DW never find the tags in the pages of sites.
  
  

  I solved this by using the following regular expression in find DW and replace dialogue, it will be all the html on several lines between two specified comments:

  Hello

  I have structured my site in dreamweaver with each page between the comments section:

  
  HTML here
  

  I used this method because I wanted to be able to easily use the find and replace dialogue with regular expressions to update pieces of code throughout my site. However, I have real problems finding the correct regular expression to use.

  So in every page I have my between these two tags, I sometimes have different HTML. I want to find the regular expression I could use 'generic' of all the html to a find a replacement between two of my comments specified. Can anyone help? I googled and tried everything what is obvious (after you have selected the regular expressions in the find and Replace dialog) but DW never find the tags in the pages of sites.

• # 500-164 HP model: backed up my files in 2 external hard drives, and then made recovery, came back and recovery error

  I saved my files to two external hard drives and then did a recovery.  After the end of the recovery, it says error recovery and no change to the computer.    I left that screen and booted up, but the computer does not go to the lock screen.  Circle of HP logo lights up and goes, but nothing happens.

  How can I get to the lock screen?   I have tried F11 and Esc.

  BreBruce-Tampa

  Your post shows your PC than the execution of win10, but it comes preinstalled with Win8x.  This means that at some point, you've done setting at Win10 level, and unfortunately, that corrupts the information of HP recovery: HP Recovery Manager blocked after Windows 10 Upgrade - HP Support Forum's - 5170752

  Once you do this upgrade, the ONLY way to perform a recovery after that use HP recovery media.

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This could be an oversight by HP, or it could also mean that HP stock is no longer the recovery media for your PC.
  
  You can try to contact the HP customer directly, using the links below, to see if you can order them if:

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  If HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• System Restore op after failure of HARD drive and replacement

  Hello

  I have an old laptop dv9000 with XPPro factory installed SP2, since upgraded to SP3. The hard drive failed (Seagate 80Gig). I checked with the test of the bios Setup, he said "fail" and I checked by booting from the windows installation disc CD player. He said, not found hard drive. SO, I bought a disc bytes of more 1 t (same mfr Seagate, same 5400 RPM) and installed. I have a backup network (Seagate Black armor) drive and I was able to restore the last backup. The booted cd drive the recovery disc for this program, the hard drive light blinking and it seemed to be something for 3 hours, then told it was full.

  But the new drive does not start. I've read on this forum and of the joint recommendation was to use the system provided with the laptop recovery disks. I dug through the boxes in the garage and have found the system recovery discs and my 14 cd makes system restore. :-) makes to keep unwanted sometimes. But I tried the system recovery disk and it will not start in the cd player. I get a white screen with the cursor in the left flashing top. I went back to try the recovery of Seagate disk, and now it will not start either. I tried to remove the new HARD drive. with or without a cd in the player it displays the message "No Op sysytem found." SO I think that something touched the CDdrive. But it is interesting with the blinking cursor will restart the machine, then perhaps a part of the op system is loaded.

  It is an old machine, the old system of the op. I shopped Hp store and only Windows8 available now. SO I am forced either on the cutting edge with all new bugs and learning curve, or I'm trying to get this old lady will machine. Other things I've linked, hard reset, restore the default bios.

  Ideas that you may have will be appreciated.

  Hello

  The laptop is back running with the new hard drive, Yay! and a new cd player.

  Here's what he had to, for anyone who has ever has the same problem:

  The CD player was bad. The nearest local supplier on the list for assistance parts hp gave me was a suitable replacement. I installed, and the system restore disc started and ran immediately.  I decided to check and see if the windows install disc would go and restore the sytem since I thought that I had already restored the entire C: partition. He started, but did not find the hard drive. He gave an eror message that does no drive found.  I went to the hp system restore disc and running. It took several hours reformatted the drive (by removing everything I'd put) and rebooted several times. Eventually, he came with a windows desktop computer. This is the factory installed there are over 5 years old. I installed the Seagate backup software and running. He seemed to have more options running in windows he did directly from the boot cd. One of the options was to restore the MBR. I had to find out what it was, Master Boot Record. I thought that it should be restored. The full restoration of the backup process C: took another few hours, but he finished and gave a message of the operation successfully.

  Then I rebooted and got windows, connected and got my office logon screen as it was at the time of the backup. Success.

  In the future, I'll watch that restore MBR, maybe it's there, and I missed it the first time. I have a slight nagging worry that maybe something else caused both drives to fail almost at the same time. But I'm not going to fuss with it. I hope that the machine works well for a little longer.

  Thanks to those who have tried to help.

  Later,.

  Dyno

• OK made a full backup, replace the hard drive and have a recovery disk

  Once my system is recovered on family Vista premium how to restore all my files from my backup disks so that things work same as before? I know that I should reload programs that are not on the recovery.

  TIA

  Hello

  You did not a full PC with Vista Home Premium backup software Vista, since they only allow backup of files.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files.

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  http://www.Vistax64.com/tutorials/100253-restore-backup-files.html

  See you soon.

• Drive HARD HP G62, Win7 HomePrem, crashed and replaced, made recovery system, win update does not work?

  Mine is a 64-bit system and the new hard drive is a western digital Scorpio. The two drives is / are 500 GB. I used the recovery disks to reload the OS to new hard drive, so I do not understand why this problem occurred. Check Microsoft sites, tried to download the system update tool before you manually download the Service Pack 1 for Windows 7, but received an error before installing (0 x 8000247).  Tried to get help from HP, but given that the laptop is no longer under warranty, I have to buy a HP warranty $ 14.99 per month for 12 months before they'll talk to me a fix for this problem.  This part is really senseless, especially when it is THEIR recovery disks I missed.  I do not be fooled by a false sense of security by HP again.  I was by Compaq and HP for many years, but this time they hurt me.  I didn't not whining when the drive went bad and I had to pay for a new because I didn't buy an extended - warranty which was my fault.  But the recovery discs that don't work are lack of HP and I wouldn't have to pay twice for an operating system.

  If there is someone out there who has heard of this and has a solution, I would appreciate it really your. Thank you.

  There seems to be a WD HDs and some Intel drivers questions. Please download and run Intel Rapid Storage Technology driver and restart your system.

  Download: ftp://ftp.hp.com/pub/softpaq/sp47501-48000/sp47845.exe

  More information: http://support.hp.com/us-en/document/c02219204

  Try to rerun the update of Windows. If it does not, follow these instructions, then try again.

• How clone a HARD drive and then use the clone with VMware (as well as Windows works!)?

  I have a system where Windows 7 is installed, and I'm doing a clone of her image of HARD drive, I then want to use in my main with VMware PC, so that I can start Windows 7 at the cloned disk.

  I used Ultimate Boot CD v5.1.1 with which HDD I wanted to clone, and I cloned using EaseUs Disk Copy, which comes with Ultimate Boot CD. The source HARD drive was 250 GB in size which had 3 partitions, while the USB HDD I have attached to the system, which was supposed to be the disk of destination/clone, was 320 GB in size. I chose to create a replica, exact and up to 250 GB of data (partitions, etc.) has been copied exactly, and the rest of space was not allocated. I have now connected this USB HDD to my main PC, shot to the top of VMware Workstation 8 and defined a new Virtual Machine and chose to boot from the USB HDD.

  The result is that when Windows starts (from the cloned HDD inside VMware), I get the blue screen error until I get to the login screen.

  How can I change my methodology so that Windows starts even on the clone? I can change the tools I use, etc.

  You can use the usb drive is
  you only need to patch the system a little registry
  to do this, you start the virtual machine with the usb drive in a restore win7 CD, and then follow the instructions I posted here
  http://sanbarrow.com/p2v2008r2.html

  Patching - easy Variant

  This procedure is used when otherwise the VM would start in a kind of bluescreen 7B.
  This means that VMware is the target and that you configure the computer virtual with VirtualHardware type 7.
  It applies only if the virtual disk is configured like this
  scsi0.virtualDev = "lsisas1068".
  scsi0:0. FileName = "imported.vmdk".

  On the platform target start the virtual machine, newly created in the Windows 7 recovery CD.
  After the initialization is complete, click CMD and run regedit.
  Select HKLM, then Menu > file > load hive.
  Navigate to the Windows directory on the virtualdisk > system32\config and select the file SYSTEM.
  When asked for a name enter p2v.
  Then find the key

  HKLM\p2v\ControlSet001\services\LSI_SAS

  and the startup type of the REG_DWORD value 0
  Select HKLM\p2v, and then click Menu > file > unload hive.
  You can now close regedit and restart.
  The next time you start, you can start in the 2008 R2 system. He should find the drivers and probably need to reboot when finished.

• How can we use, "Create trigger and replace" using the oracle form

  Hi all
  How can we use the following creation or replacing the trigger in the form of oracle?
  Please help me.
  
  CREATE OR REPLACE TRIGGER app_user.after_logon_trg
  AFTER LOGON WE app_user. SCHEMA
  BEGIN
  DBMS_APPLICATION_INFO.set_module (USER, "Initialized");
  EXECUTE IMMEDIATE 'ALTER SESSION SET current_schema = SCHEMA_OWNER';
  END;
  
  Sarah

  user434854:

  Your information is good enough about the use of roles. This is the model of security that our customers use. Only assign us a password for roles and issues of connection of users shape the grant sql role using the password is used since in the form.

  However, I agree with Andreas on the hard coding schema owner. We have several clients, and each of them has a different name for the owner of the schema. By creating a public synonym for access to our forms tables, our forms work well at all sites.

  And after 325 posts, why don't give you yourself a real name on the forum?

• Remove the drive hard ubuntu and replace them with windows 7 from DVD

  In the process of reinstalling windows on a laptop that had top ubuntu, I followed the instructions as "where do you want to install windows." The computer gives me disk 0 Partition 1 512 MB 507 MB free space / system, disk 0 Partition 2 589 GB MB 0.0 MB primary free space, Disk 0 Partition 3 5.9 / 0.0 MB GB free space / primary. In order to reinstall my Windows 7 (which was a computer someone borrowed from me and he came back with ubuntu which I want to replace) delete all partitions of three. If so, this will not affect my computer?

  Thank you

  Yes, you must delete all partitions. Ubuntu Linux create multiple partitions during installation which includes a Swap, system partitions.

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• I change my hard drive and lost my recovery, I have a lenovo with windows 7 Edition z570 Home premium 64-bit, what can I do to install the new oem with my serial number

  I want to reinstall my windows oem 7 without going to the store

  If Windows came with your computer - to replace the installation disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee.

  Lenovo - call to order recovery disks:

  http://support.Lenovo.com/en_US/product-and-parts/detail.page? & LegacyDocID = YAST-3P2QYL

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses