Failure of execution of test scripts.

Similar Questions

• Public names for the results in a test script

  When we set some attributes as a result in a test script or we should assign public names to these attributes of result should leave those who attribute with system generated public names?

  The reason I ask is if for some reason any public attributes that are generated, the system located in the results, changes its name due to the addition or deletion of rules then those should not influence the results - expected mergers in the real value of the test scripts that are already present in the modules.

  I didn't test this scenario... like my system of cases generated public names remained the same even before after adding a rule to the same document.

  Can we know how OPA decides what public names to automatically generate? I know that generally, the suffix is the name of the document as b4@document1_doc

  The 'view' in issue Edit field has nothing to do with the ID attribute and public names. It's just a matter what text you want to appear on the label in the regression Test report. The only way to have a stable static attribute ID is to add a Public name.

  See you soon,.

  Jasmine

• Can you please provide me with the fresh Fusion Mobile APP to install and test script document?

  Can you please provide me with the document merging Mobile APP cost installation nd test script?

  You should ask this on the forum of merger App.

  Their application is on the public folder store before you can from there:

  https://iTunes.Apple.com/us/app/Oracle-Fusion-expenses/id516172076?Mt=8

• NAS NFS Mount/Unmount Test failed with this error - "failed to Test script 300 s to/opt/vmware/VTAF/Certification/Workbench/VTAFShim line 279, line < STDIN > 309 cleaning" it's a matter of workbench?

  Excerpts from run.log

  *****************

  2014-09-10 13:21:51 UTC...

  2014-09-10 13:21:51 UTC [VMSTAF] [0] INFO: VM: [PID 13775] command (perl /iozone - duration.pl d 3600 f - 128 m - r 1024 k t /tmp/iozone.dat 1 > /iozone.2.log 2 > & 1) on 192.168.1.25 is completed.

  2014 09/11 01:36:16 UTC Test script failed to 300 s to/opt/vmware/VTAF/Certification/Workbench/VTAFShim 279, < STDIN > line 309 cleaning.

  2014 09/11 01:36:16 UTC interrupted Test

  One thing noticed here is that there is no logs generated during about 12 hours between the completion of test on one of the GOS and Test Script failed.

  All of the recommendations will help...

  Do not wait more than 2 hours if you think that the test case is stuck. Clean and restart the test.

• How to create the function inline within a test script

  I have a test script. I want to create an inline function that will do a few things. How can I make syntatically.

  declare 
    -- Local variables here
    i integer;
  begin
    -- Test statements here
    -- have a function spec and body how?
  end;

  Hello

  You can define a function in the DECLARE section and use it in the BEGIN section, like this:

  declare
    -- Local variables here
    i integer;
  
       -- Defining successor function
       FUNCTION successor (in_num  IN NUMBER)
       RETURN      NUMBER
       IS
       BEGIN
            RETURN     in_num + 1;
       END     successor;
  begin
  
       dbms_output.put_line ( successor (1) || ' = successor (1)');
  end;
  /
  

• HP pavilion 205t - 500 CTO: failure of DST short test system

  I recently had problems with my computer and I did a test of the system that came with the Id 9gf14k-79j87h-qffv6k-60rn03 failure. -What it means and how to fix it?

  @JockoTheTaco, welcome to the forum.

  This error message said you that your hard drive has failed.  Your only option is to replace it.  You should buy a disk HARD of the same size or larger to ensure that recovery media will work with him.

  Here's a guide to help you with the replacement.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite C660D - media failure PXE - E61: media test failure, check cable of

  Hello

  hope I can help with this problem.

  I have a Toshiba Satellite C660D, which I bought in 2011 and he has recently started to act, whenever I try to pass on it tells me

  Realtek PCIe GBE Family Controller series V2.38 (24/12/10)
  PXE - E61: media test failure, check cable.
  PXE - MOF: Exit PXE ROM
  Operating system not found

  This problem started when I tried to install the new operating system (Win 7 32 bit) on my hard drive of the windows partition, this instillation was a success, and I even managed to create a user profile after installation.

  However, as soon as I logged on to the computer says me he wants to get back out to check my windows and it did it automatically and since then he never restart and tells me that this media test failure error.

  I checked my hard drive if that work by connecting it as external on another computer and its still fine with everything that always there, I deleted and reintroduced it a couple of times, but always the media test failure still occur, I even tried to change the sequence of start several times, including the default settings , but the problem still persists.

  I have two laptops of the same type and both of them give me the same problems, I am running out of ideas on how to fix this problem any help will be much appreciated.

  Thank you

  Hello
  This message means that the system was not found on the HARD drive and the next boot device was LAN. But unit was not able to boot from LAN and so this PXE error appeared.

  You said that the HARD drive is OK. Well, what is the status of the HARD drive in the BIOS?
  HDD is recognized correctly in the BIOS on the first page of the BIOS?

  Where it is, you should try to reinstall the system once more.
  In the case of the disk HARD isn't visible in the BIOS, you must replace it.

• Pavilion dv6: failure of hard drive test

  my system does not work and I tried to go to safe mode but is not wor and I trried to do system test and there all tests except the short DST hard drive, it failed with the following information

  Failure ID: OLKQ0F-5SW7JD-QFPH5A-60XE03

  PRODUCT ID: A7M81EA #ABV

  kindly help me, what should I do?

  The hard drive needs to be replaced. Where are you located (one country)?

  Dv6-6c40se is the model number. You have recovery discs? We can help you with the purchase of a new hard drive (which is not as expensive as you probably fear), its installation and put the software on it. Post back for help if you wish.

• Pavilion 15-p009tx: failure of hard drive test

  Hello, I was using my laptop for about six months, and today when I tried to boot up the laptop, it would just show a blue screen. That's why I started dianosis and it failed hard drive DST test. Failure ID is 600ETA-7AX7L1-MFPV6K - 60S 503. Product ID is G8E21PA #ABG.
  Support will be greatly appreciated.

  Hello

  Error code 24 characters for the drive Self Test (DST) would indicate that hard is defective and must be replaced.

  As your laptop is only 6 months old, it should still under warranty, so contact HP and arrange for the replaced disk - if necessary, you can check your warranty status.

  If you live in the United States, contact HP here.

  If you are in another part of the world, start here.

  Kind regards

  DP - K

• Execution of Tcl Script in command prompt

  Hi all

  Can someone show me please how to run a tcl script from the command prompt on a cisco router?

  See you soon

  Carlton

  You can run political EEM manually if they are registered with the no event detector.  So what you did is fine.  However, if you want to run it just to test it, take a look at https://supportforums.cisco.com/docs/DOC-12757 and scroll down to the section of the test.

• Component sql tests (scripts) of Microsoft Test Manager

  I have a bunch of tests (mainly sql scripts) to a Microsoft BI solution. I was wondering if these tests can be called from Microsoft Test Manager (MTM). If any body knows the answer please let me know. I need this emergency guide kindly if you know the answer.

  Hello

  Please post you question about SQL test to the following link:

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/

  I hope this helps.

• Replace drive hard hp pavilion dm3 after failure of hard drive test.

  All,

  I have a HP Pavilion Dm3. Windows 8 Beta. My error messages included: drive hard Test failed. Hard disk 1 (303) fast. Hard drive 1 full (395). Most recent upload has itunes. From what I see I need to replace my hard drive.

  My question is this; is there a manual or a guide on how to, 1. physically, replace the hard drive and 2. record information that may exist on my hard drive crashed? Thank you in advance for your help!

  Hello:

  There are many models of dm3.

  I pulled a repair of the dm3-2000 series. I hope that this layout is the same.

  Read Chapter 4 of the procedure on the removal and replacement of the hard disk. Do not throw the old hard drive.

  You will need to the caddy, the connector and screw to transfer to the new.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c01893277/c01893277.PDF

  Before you remove the hard drive, you can see if you can copy your files on a USB portable hard drive by downloading, burn it to a CD (using the ISO burning method) and make a the Kapersky rescue CD bootable CD. This will allow you to see the folders on your C:\ drive using the method of the graphical interface of the program execution.

  Then you can copy and paste your files on your portable hard drive.

  If the rescue CD can not see your hard drive, there's probably nothing you can do anything to the drive for recovery.

  http://support.Kaspersky.com/FAQ/?QID=208282173

  Paul

• error - bunch of comments script manager - vRO 6 during execution of the script

  Hello

  Lately, I've been making a mistake during a running script in a guest. Linux as well as Windows servers is affected.

  I use the package to change the password root\admin as a day 2 after commissioning a system with vRA. The script simply runs 'passwd root' or 'net user administrator [paqssword]' on the new server.

  The error is on Linux:

  "A general error has occurred: the url generation failure (Workflow: copy of the file of comments to the vCO / Scriptable task (item1) #9).

  

  the vCenter report to event log "comments authentication operation failed to create the temporary directory for operating on a virtual machine [vmname] '.

  The nested workflow that throws the error is 'Copy of the file of comments to the vCO' workflow, the line of code that indicates the error is:

  var ftInfo = fileManager.initiateFileTransferFromGuest (vm, guestAuth, guestFilePath);

  The value of guestFilePath is imported from the attribute scriptOutputFile = / tmp/vmware-root/vmware160/vco_vmware185

  Under Windows:

  A general error occurred: could not generate URLS (workflow: copy file of vCO for host / Scriptable task (item1) #11)

  

  This time, the "file copy of vCO in the comments.

  var uri = fileManager.initiateFileTransferToGuest (vm, guestAuth, guestFilePath, attr, srcFile.length, overwrite);

  The value of guestFilePath comes from cmdAnsiGuestPath = C:\Users\[username]\AppData\Local\Temp\vmware20\cmdANSI.exe

  Is could someone please help me solve this?

  After checking the js - io - rights.conf still (permissions properly), under the chmod + x o vRO temp folder and restart the device, the workflow now works on all hosts.

  Why he has managed to work on the only two hosts in the past, I did not find.

• XSL Transform map failure during execution due to missing element Xpath

  Hello

  I have a case where I use a source variable which has two components. At run time, these variables can be non-existent depends on previous activities.

  The problem is the transformation XSL doesn't like it and fails with the error

  XPath expression cannot run.

  The XPath expression cannot run; the reason was: oracle.xml.parser.v2.XMLDOMException: import not allowed on nodes of type of document.

  Check the detailed origin described in the text of the exception message and verify that the XPath query is correct.

  How can I ignore for the mapping of similar transformation to affect ignoreMissingFromData activity?

  Thank you.

  Hello

  > variable source that has two components. At run time, these variables can be non-existent

  Are you talking about BPEL variables or XML elements? Can send you a sample xml?

  In any case, I think you could use getContentAsString or something like that in your XLST and causing its failure... A workaround is to use xslt:if or xslt: choose test if the element is there...

  See you soon,.

  Vlad

• ORA-01017 encountered during execution of shell scripts

  Hello
  
  During execution of the backup script for one of my databases, the script contains a login section which breaks down as shown below
  
  Section login script:
  
  sqlplus / < < END > /tmp/$PROGRAM.tmp
  
  
  Error generatedf in the log file:
  
  SQL * more: Production release 11.2.0.3.0 on sea Apr 10 11:32:06 2013
  
  Copyright (c) 1982, 2011, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  Two points to note:
  1) there are two other databases on the same server and they have no problem
  (2) I am able to connect to this database as ' / '.
  (3) I am able to connect to the database as sysdba from another server
  (4) the script runs successfully when I change like: sqlplus / as sysdba < < END > /tmp/$PROGRAM.tmp

  Hi, for the use of this you must create a user authenticated externally then it will work... Check other databases where you are using the sqlplus / connection for your refrence command