False values there are months and QTD

Similar Questions

• I have a Toshiba Satellite C655-S5305 application, running Windows 7. I made a few cds of music there are chandeliers and that they will not play on this computer. They do not play on my computer of husbands, good girls.

  I have a Toshiba Satellite C655-S5305 application, running Windows 7.  I made a few cds of music there are chandeliers and that they will not play on this computer.  They do not play on my computer of husbands, good girls.  I think that they are MP3.  My cd drive is appearing and showing to work properly, but just read it as a blank CD.  To go with this... I am a legal transcriptionist and use a program called FTR player.  I downloaded some MP3 audio files and who won't play in my FTR player either, so I think it has something to do with. MP3 files, in the form of .wav files play in my FTR player very well.  Any help would be greatly appreciated.  Thank you in advance, Jodi

  Red flag.  CCcleaner.  If you used to "clean" your registry database, which can cause problems.  CCcleaner is also a good program, but registry cleaners do not help and remove what they think are "unused" entries in the registry that can cause problems later.

  Try to download the Real Player and see if that corrects your problem, but if it is not, you may need to restore your computer to the factory settings by your user guide's instructions.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. External hard drives 1 TB are about $85 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Hawthorn of pixels there are resolutione and one foto photo? Where?

  Hawthorn of pixels there are resolutione and one foto photo? Where?

  If you click a picture, it will take you to the image details page which has the most information.

• Why there are graphics and Movie Clip in Flash?

  Where there are graphics and Movie Clip in Flash?
  
  What is the deference?
  When to choose one of the other?
  It would be simpler if Flash does that Movie Clip (so people are not confusing choose)?
  
  Thank you!
  
  

  Main differences are:

  MovieClip symbols contain their own calendars. That's why they can run animations inside of them that are independent of the main timeline. They are also targeted by actionscript to run the script-driven events, animations, changes, etc.

  Graphic symbols are better used to hold static images images, text or what you create with the drawing tools. Although you can run an animation in them, it should the main timeline to be of the same length to see the full animation. Graphic symbols cannot be targeted by actionscript.

• There are horizontal and vertical lines on the screen

  I have an asus game monitor old 2 years... other days I let my 12 year old son House and when I returned, he said my monitor was broken... I shot to the top of the platform and there are... also.i .vertical and horazonaly can see the image on the screen through the lines as if someone in em pencil in... IV never seen this befor... any clues as to get rid of um? Home build phenom 965 be-850 watt he's corsair psu-all sata 1.5 to hdd-7970 saphire dule x - all air cooled and clocked at 4.114

  Check the video cable to the monitor and the computer side, the lines of deformation may indicate when its loose or if you have a bad cable. A bad cable is unlikely, but one cannot rule out completely without trials.

  If you have another monitor or know someone who you can borrow a display test, it would be the fastest and the most effective way to be sure where the problem is.

  If lines change or "move" when you move the mouse or a window autour, this indicates a bad connection or bad cable as indicated above or a problem with the video card. Overclocking can cause this kind of things happen as well so if you have overclocked your hardware, return it back to the factory settings and the problem may disappear.

  If the lines are always the same and do not change when you move the mouse or a window autour, the monitor is probably the problem.

  Figure 8 and 9 on the link below both show what it looks like when the monitor is the problem in the above example: http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph05236&lc=en&cc=ie&dlc=en

• Anyone know why I have some formatting issues with my Tablet and phone of the sites? I only have the layout of office. There are banners and footers only reaching is not the edge of the screen.

  I only have the layout of office. As I had problems with the phone and Tablet page layouts. However there are are the banners and footers only reaching is not the edge of the screen. This is only a problem when accessing the site via a phone or a tablet.

  the site is www.excellententertainment.biz

  See you soon

  Hughie

  Do a Select all on your pages (most likely a master page is it effects all pages) and you'll probably find an empty element or element that goes beyond the edges of the design to the design of your office.

• Find the right Partition for swap Partiton when there are PARTITION and SUBPARTITION

  Hi all

  I have a small problem:

  I want to find the right cause of partitions of the partition key.  I have a partition and a Subpartition (sample - table in annex).

  I leave the database to generate the partition (and name), the name is generated. I need to find for the exchange of partition

  the right of Partition has cause of a given value of the partition key (in this case EVOD_PART_DATE and 20141101 value).

  When I try to find the right partiton name, I would use generally not:

  SELECT DISTINCT dbms_rowid.rowid_object(ROWID) data_object_id
     FROM F_CONTRACT_EVENT
     WHERE  EVOD_PART_DATE = TO_DATE ('20141101','YYYYMMDD')
  

  Okay, I get 2 rows, I'm expecting one, but cause the result are the subpartions, I get this:

    SELECT *  FROM ALL_OBJECTS WHERE DATA_OBJECT_ID IN ( 155159,155154);
  

  I see:

  EVO_DM    F_CONTRACT_EVENT    SYS_SUBP4292    155159    155159    TABLE SUBPARTITION
  EVO_DM    F_CONTRACT_EVENT    SYS_SUBP4287    155154    155154    TABLE SUBPARTITION
  

  But I don't want the subparts, I want the PARTITON!

  The table:

  CREATE TABLE "EVO_DM"."A0_F_CONTRACT_EVENT" 
     ( "EVOD_DDATE_ID_VALID_FROM" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DDATE_ID_VALID_TO" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DTIME_ID_START" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DSUST_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DCHAN_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DARTI_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DCAMP_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DUSAG_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DOPSY_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DDEVI_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DSHOP_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DPLFO_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DACCO_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DDECL_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DOBJT_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DOFFR_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DCNTR_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DCURR_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DCONT_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DIVWC_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "DD_SUBSCRIPTION_ID" VARCHAR2(50 BYTE) DEFAULT '~' NOT NULL ENABLE, 
      "SINGLE_ISSUE" NUMBER(8,0) DEFAULT 0, 
      "SUBSCRIPTION" NUMBER(8,0) DEFAULT 0, 
      "RENEWAL" NUMBER(8,0) DEFAULT 0, 
      "CONVERSION" NUMBER(8,0) DEFAULT 0, 
      "DOWNLOAD" NUMBER(8,0) DEFAULT 0, 
      "UPDATES" NUMBER(8,0) DEFAULT 0, 
      "NET_VALUE_IN_EUR" NUMBER(10,4) DEFAULT 0 NOT NULL ENABLE, 
      "GROSS_VALUE_IN_EUR" NUMBER(10,4) DEFAULT 0 NOT NULL ENABLE, 
      "COMMISSION_IN_EUR" NUMBER(10,4) DEFAULT 0 NOT NULL ENABLE, 
      "TAX_IN_EUR" NUMBER(10,4) DEFAULT 0 NOT NULL ENABLE, 
      "POSITION_NR" NUMBER(3,0) DEFAULT -1, 
      "DD_ORDER_NR" VARCHAR2(50 BYTE) DEFAULT '~' NOT NULL ENABLE, 
      "EVOD_SOURCE_CD" VARCHAR2(50 BYTE) DEFAULT '~' NOT NULL ENABLE, 
      "FLAG_STOCK_RELEVANT" NUMBER(1,0) DEFAULT '0' NOT NULL ENABLE, 
      "RENEWAL_NR" NUMBER(3,0) DEFAULT -1, 
      "EVOD_DDATE_ID_SUBSCRIPTION" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
      "EVOD_DPRCG_ID" NUMBER(20,0) DEFAULT -1 NOT NULL ENABLE, 
    
     EVOD_PART_DATE DATE  GENERATED ALWAYS AS ( TRUNC(TO_DATE(TO_CHAR(EVOD_DDATE_ID_VALID_FROM),'YYYYMMDD'),'MM')) VIRTUAL)
  PARTITION BY RANGE(EVOD_PART_DATE)
  interval(NUMTOYMINTERVAL (1,'MONTH'))
  SUBPARTITION BY LIST(EVOD_SOURCE_CD)
  SUBPARTITION TEMPLATE(
  SUBPARTITION "P_ITUNES"  VALUES ('ITUNES') ,
  SUBPARTITION    "P_WSP"  VALUES ('WSP'),
  SUBPARTITION   "P_GOOGLE"  VALUES ('PLAYSTORE'),
  SUBPARTITION   "P_DEFAULT"  VALUES ('~') ,
  SUBPARTITION   "P_AMAZON"  VALUES ('AMAZON_EREADER', 'AMAZON_MANUELL', 'AMAZON_TABLET') ,
  SUBPARTITION    "P_MSD"  VALUES ('MSD')
  )
  (
   PARTITION P01 VALUES LESS THAN (TO_DATE('200310','YYYYMM')) SEGMENT CREATION DEFERRED
  )
  PARALLEL 10  ;
  

  Any ideas?

  Thanks for Berlin

  First of all - the DOF you posted is INVALID - you do not specify a delayed segment creation for partitions. Specify you for the table.

  Also, you must remove the DEFAULT value - 1 for the partitioning column. The value '-1' cannot be converted to a valid date for the virtual partitioning column value.» The default value is useless and will give confusion around the year exception err when the exception should actually provide a NULL value for a column not null.

  The documentation explains how to use the EXCHANGE PARTITION and has the code example

  Maintenance of Partitions

  Exchange a Partition of a partitioned Table interval

  You can exchange of range partitions in a partitioned table interval. However, you must make sure that the partition of the interval was created before that you can swap partition. You can leave the database create the partition in the partition of the interval of locking.

  The following example shows an Exchange partition for the interval_sales table, range-partitioned using the monthly from partitions of 1 January 2004. This example shows how to add data to the table using charge Exchange partition for June 2007. Assume there is only a local index on the interval_sales table and equivalent index have been created on the interval_sales_june_2007 table.

  LOCK TABLE interval_sales  PARTITION FOR (TO_DATE('01-JUN-2007','dd-MON-yyyy'))  IN SHARE MODE;    ALTER TABLE interval_sales  EXCHANGE PARTITION FOR (TO_DATE('01-JUN-2007','dd-MON-yyyy'))  WITH TABLE interval_sales_jun_2007  INCLUDING INDEXES;
  

  Note the use of the FOR syntax to identify a partition that has been generated by the system. The name of the partition can be used by querying the *_TAB_PARTITIONS view of data dictionary to find the partition system-generated name.

  Given that the last paragraph? That's what showed Solomon.

  NOTE:-special attention to the FIRST paragraph. If you use segment carried OVER creating the partition you want to Exchange could NOT have been created yet.

  Make SURE that you lock the partition as the example shows, or you will get an exception if it has not been created.

  Also - we know NOT what PROBLEM you're trying to solve.

  If you exchange a PARTITION of a table subpartitioned your working table should actually be partitioned using the SAME parttioning as the subparts in the source table:

  See my response in this thread:

  https://forums.Oracle.com/forums/thread.jspa?threadID=2482090&TSTART=30

  In this thread I have provide the code example illustrating how the table should be created and made Exchange.

• There is no VGA Jack on the back of my brand new computer! There are DVI and HDMI, but not VGA!

  Brand new HP Pavilion p6745f computer. Time to connect, create a boot disk, install Kaspersky Anti-virus and then see that old programs will still work. The first step, hook up monitor... OK... hmm... no plug VGA input. There is a white DVI and the black input HDMI but... huh? Should not be a VGA? The monitor is only a couple of years... Has anyone seen this?

  Pretty much any store of electronices, you can purchase a DVI - I to VGA Converter. That's what you need to be able to use your old monitor.

  
  Best regards
  ERICO

• I had CC annually there are teams and have not used.  Now I can't add myself, even if I renewed.

  I have not responded to my invitation to myself last year, (didn't know I had) and no longer have the invitation apparently.  (I have subscribed, but has not used the CC).  Should I remove me as a user and just send it again?

  If you are always active subscription, you must cancel the invitation and send again.

• My email is wrong without changing any settings. TB said there are messages and I can see them using webmail, but that's all.

  I deleted a large number of my outgoing and addresses collected because I thought that maybe clother my incoming messages, but that did not help. The problem occurs with all my 11 (yes I know) email addresses and seems to get worse every day.
  What held things?

  try turning off email scanning in your anti virus.

  11fait nothing I have 20.

• I have a HP photosmart printer. I have problems printing of documents. I get a message that I have more paper. However, there are paper and the tray is installed properly. What can I do?

  I have a printer HP photosmart Plus B209. my pc is communicating with my printer but the printer will not print because it repeats me more paper. However, the tray is properly installed and loaded paper. I unplugged my printer and plugged back in nothing works. All boards

  Hello

  1. What is the full/exact error message?

  2. who is the operating system installed on the computer?

  A supply of paper problem can occur for several reasons, such as rolls of papers dusty or contaminated, the condition of the paper in the tray, or even problems with the software.

  You can run the troubleshooter and check.

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: You can change the operating system that is appropriate in the article.

  See also the steps from HP article:

  HP Photosmart Plus (B209a, B209c and B209b) all-in-one printers - all-in-one not picking up or feeding of the paper in the Photo tray

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3777155&prodTypeId=18972&ObjectID=c02156652

  Hope this information helps. Response with status so that we can help you.

• I don't see States USERS\PUBLIC file folder is empty but properties States there are subfolders and files

  I had to remove some users on the computer, now, I do not see the files in Users\public. States of Explorer folder is empty but clists them properties. also, if I search for them as they appear on the results but I can't access it then.

  Hi David Lister,

  1. What account you're connected to?

  2. what happens when you try to access the folder using a different account?

  3. you receive messages or error codes when access you the folder?

  You can try to use the administrator account and try to access the folder.

  You can also try to restore the file to the previous version and check if it helps:

  Try to restore the files from previous versions.

  a. open the computer by clicking the Start button, click computer.

  b. navigate to the User\Public folder, right click and then click on restore previous versions.

  c. you will see a list of the available versions of previous of the file or folder.

  For more information, you can consult the following article:

  Previous versions of files: frequently asked questions

  Hope this information is useful.

• Why is there a warning and error in administrative events in Event Viewer?

  When I open the event viewer, and then the chip on the custom view and then double-click Administrative events there are warnings and errors in this case why that is and what I need to fix it or leave it alone.

  [Moved from comments]

  Please provide us with your administrative Event Viewer logs by following these steps:

  Click on Start Menu
  Type eventvwr in the find programs and files (do not hit enter)
  Click with the right button on eventvwr.exe and click Run as administrator
  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download .zip here (if you can) to skydrive or a file sharing service

• In my table there are some values as inf and Nan, before to save my table I want to eliminate these values. How can I do this?

  In my esperiments I get certain values such as the inf and Nan and I want to eliminate these values before you save my table in a file because then I would take the average of those values that are stored in a file

  How can I do this?

  Thank you

  Here's a quick example:

  

  Make sure you use not A number/path/Refnum? Function, because direct comparisons with for example a diagram NaN constant could give surprising (for some) results. For example, you think you could add a NaN value to the constant table diagram and remove some code, it is not working properly.

  (Of course if you have an older version of LabVIEW, you might not have the conditional tunnel. In such a case, it should be a bit more code in view)

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.