Fast action with effect

Similar Questions

• As part of a conditional action glow effect

  I have a glow effect that is a decision of a tip action blocks. After the object is lit, I want that he stop glowing and return to its normal state. Is this possible?

  Hi Jay,.

  I guess you try ApplyEffect action with 'ColorEffect-> SetGlow' and checking output swf. Please correct me if I'm wrong.

  Effects that start with the prefix 'set' in the category 'Effects-> ColorEffect' will be in effect at all times. So in your case, the glow disappears not the legend.

  Please change your conditional Action advanced by changing "ColorEffect-> SetGlow' as 'filters-> Glow.

  Please change the action as ApplyEffect ObjectName Glow

  When you click the button, effect will be applied on the legend and the glow disappears after a while. Let us know if it solves the problem.

  Kind regards

  Alexis

• Anyone having problems with effects after that put 5.0.3 update?

  Since the 5.0.3 update a few weeks ago, I had problems with adding an effect to a clip. It seems not to matter type (both are res HD, either a shot on a Canon 5 d Mark II or a .m2t file .mov from a camera of HD Sony HVR - Z5U with a registration unit of memory). I have been using the file types of the same cameras with CS5 since August without any rendering problem, by adding effects, playback, slow response time, etc. Now, it seems doubtful that PrPro can handle adding an effect to a clip.

  Before it would show changes to the effect on the video in real time, but now it takes several minutes for the small front wheel I can access PrPro again. By example, if I add a fast color corrector or levels and try to change only one attribute, it unfolds, crashes, and then finally updates. He plants not (unless I force quit), it just hangs. I tried with just Finder and open PrPRo, and it still occurs. Previously, I could launch Photoshop, Firefox, Chrome, Mail, Finder, * AND * Pro

  Nothing else is it slow (playing back non-rendus, while that rendered or book review), although any reading can be slow sometimes with effect. In addition, there doesn't seem to be picky to a certain video effect. I've done everything I can think of, returning Short or reinstall: log in as root, Pref delete, drives hard various small clips. Initially, working on a FW800 external drive, I have recently worked on internally to test clips, but apparently not to the disc material.

  The fact that everything worked fine before, I can't that assume it was the update. I have the same software on a similar but lesser model home with no problem, but the 5.0.3 update failed with the auto-update and I have not tried to install it manually, is still on 5.0.2.

  Anyone else having this trouble and short of reinstalling, you found a solution? Thank you.

  iMac 27 "(21" model of Home Basic) "

  Mac OS X

  10.6.5

  2.8 GHz Intel Core i7 (4 cores)

  8 GB RAM

  ATI Radeon HD 4850 512 MB

  Master Collection CS5

  > Is there documentation available online on how to revert to the previous version?

  Uninstall Premiere Pro. Then, reinstall without updates.

• Sharing of software (slideshows with effects)

  What is a shared program of photo safe and free to download for use with Windows 7 (for slideshows with effects such as fading and eventually add music).

  http://www.howtogeek.com/HOWTO/15714/create-a-slide-show-in-Windows-7-Media-Center/ If this post answered your question, click Mark as answer.

• is the compensation required for adobe after effects trial if I want to only publish my movie no comercial non-profit on youtube or instagram on length 40seconds with effects.

  is the compensation required for adobe after effects trial if I want to only publish my movie no comercial non-profit on youtube or instagram on length 40seconds with effects.

  I did the film about 40seconds length with effects that I have trial.is aae mandatory compensation to publish this movie on youtube or instagram?

  30 days trial version and there are no restrictions. If you want to publish something you just make sure that you have the copyright for all materials that you use.

• How can I export AE project with effects of bubbles in first? Bubble effect is not transfer

  How can I export AE project with effects of bubbles in first? Bubble effect is not transfer

  Return an intermediate element.

  Mylenium

• How to create a dynamic action with a button?

  Hello, I created a dynamic action with a button, which should show a region of the page When you click.

  What I have to enter in the State et value of the condition?

  Thank you

  Hello

  1. in doSubmit ("ACCEPT");

  ACCEPT is nothing than the name of the button, but I hope that you have created the name of the button as "BELOVED".

  $2 s ('P57_ACCETTA', 1);

  $s('P57_ACCETTA',1)---> all by setting the value you give space. Make the changes and check.

  And you enter this script in the HTML header.

  If possible you can send your page with the credentials so that will look.

  -SreeNithi.

• When clicking on create action with HYperic open source 3.0 v296 nothing happe

  When you click 'create the action' with HYperic open source 3.0 v296 that nothing happens. I do not get a dialog window to create an action once an alert is reported and has NOT recognized. ???
  Is this ONLY for the EE hyperic? Im doing the escalation of configurations of systems.

  Currently supported browsers are:

  Firefox 1.5, 2.0 (Linux, Windows, Mac)
  IE 6 (Windows)

  IE 7 should be good too, but has not been tested.

• can perform us two actions with a single button in two clicks, one after the other?

  Mr President.
  
  can perform us two actions with a single button in two clicks, one after the other?
  
  I want that when I click on the button Add once it add data to the database and when I click again on this button it clears the form data to the empty fields.
  
  Concerning
  
  Tanvir

  In the code, it should be easy.

  The following code adds that a button called butman with text 'ADD '.
  It then registers a listener that will be called if the user clicks the button.

  This listener then calls the runAddData method if you clicked butman while it contained the text of "ADD" and it calls the runClearData method otherwise.
  That's why he will swap the functionality of the button between ADD and CLEAR on each click.

  final Button butman = new Button("ADD");
  butman.setOnAction(new EventHandler() {
            @Override
            public void handle(ActionEvent t) {
                      if (butman.getText().equals("ADD")) {
                                butman.setText("CLEAR");
                                runAddData();
                      } else {
                                butman.setText("ADD");
                                runClearData();
                      } // END IF-THEN
            }});
  

  I hope that's what you wanted.

  Further reflection.
  You might want to run the ADD and CLEAR methods in their own son so that it can run in the background without slowing down your user interface.

  I also reuse rather a single button for several features instead of to apply with hundreds of nodes used only rarely with masses of code to show and hide as needed.

• PS CC: Impossible to save an action with filter Color Efex Pro 4

  I know not how to record actions, but I can not record an action using Color Efex Pro 4. When I try to record the action remains empty. What I am doing wrong?

  Earlier (3 weeks), I made an action with Silver Efex Pro 4 and that the action will still works. But also a new record action does not work (Silver Efex and Color Efex).

  I have not made changes to the system or software. I use an iMac 21.5 "end 2013 with PS CC.

  Already solved.

  For anyone interested: to save a Color Efex action, you must select Color Efex in the menu Filter and NOT in the Google Panel in Photoshop (the one with Dfine, HDR Efex, Viveza, Color Efex etc.). Very strange, but that's all.

• boudingbox size of a slice of base layer with effect fx

  Hello

  given that

  1 features and shadows are increasing the size of the layer-based slice.

  2 slices of base layer moves, grows and shrinks with the layer is as

  where can I find the size of this base layer range?

  PS shows the default size and the size with effect?

  
  

  The respect of
  

  Hey lionel,

  You can find the size of a slice to drag a marquee on a slice and by looking at the size in the info panel:

  

• Two actions with a single button Oracle adf

  Hello
  Dear all,
  I want two action with a single button. Before posting, I studied this thread, but it seems that it cannot solve my problem two actions with a single button?
  It's my button and its action http://4.bp.blogspot.com/-tpP5wIW8JLI/T66zhLZgG0I/AAAAAAAAAPY/F1A-Ka8KGPY/s1600/req1.JPG
  getReqID button is actually a call to a procedure that returns a value to his class of action. The cb1_action function is...
  public String cb1_action() {}
  BindingContainer links = getBindings();
  OperationBinding operationBinding = bindings.getOperationBinding("getReqID");
  Object result = operationBinding.execute ();
  int id = Integer.parseInt (result.toString ());
  System.out.println ("result =" + id);
  If (! operationBinding.getErrors () .isEmpty ()) {}
  Returns a null value.
  }
  Returns a null value.
  }
  It works very well. Don't know I want to, click this button, it also opens a page of .jsff. but I'm unable to open this page.
  Help, please
  Thank you
  Muhammad Nasir

  The first image you provided shows a small 'Attention' sign on the "request for quote-global-TF" which, I guess, gives you the sentence.
  This warning tells you that there is a problem with the task flow that you imported from the pot. Move the mouse over the warning sign a see what message you get from the frame on the error. If you don't get one, in 'source' view and look for red or orange squares in the gutter of the right hand. Scroll to the position of the red square and move the mouse over the underlined part red or orange of the code.

  Timo

• dynamic problem Actions with Curren element value

  Hello
  
  I use apex 4.0.2
  
  I want to compare two digital elements (A, B).
  If 'B' was smaller that the 'A' then give an error message.
  I used dynamic action with the following characteristics:
  
  Name: Control_VAlue
  Sequence: 10
  Event: change
  Product (s): B
  Condition: less of
  Value: & a
  Action: alert
  
  Result of fire when the event is: true
  setting-> text: error 'B' and 'A '.
  
  When you run the page and enter data for A: = 20 and B: = 10 does not execute the command.
  
  If the value of value to 20 parameter (value: 20 (static data)) then run the page and enter b: 10 control run successfully.
  
  Who can help me?
  
  
  Thank you
  Jovaini

  Here's a start:

  change the status of 'JavaScript Expression' and the value of "this.triggeringElement.value".<>

• Text with effect of cartoon caption

  Hello

  I would use a text with effect of cartoon caption, but I can't find them in captivate.

  However, I found a great widget: "vivid text caption.

  The problem is that this widget does not change its size with the content of the text like this to other text caption.

  Do you know where I can find this kind of text captions or the use of the widget?

  Kind regards.

  Hello

  I know that this widget, what do you do with that doesn't seem to work? I do not understand the question.

  You can put the text into any object drawn in Captivate, and it ends in this form (oval, rectangle, polygon). If you make this transparent form and without a shot on top of the image, you want you will have your effect. In this blog (old), the first I ever published, I showed an example:

  Place text in a form

  Lilybiri

• Need to create a textinput with effects

  I need to create a textinput with effects - it should show a blue icon in front of it when the icon is focused and blue icon should fade later. I'm sure I need to use the skin but the problem is that I have only two States with textinput control and do not know how I would use those to ensure handling mouse hover effect. At the moment I'm not able to create a custom component bacuae I need to change all the code anywhere where there is textinput control.

  Thanks in advance.

  Rachel

  You can find this useful blog: http://flexponential.com/2010/01/24/custom-focusskin-for-spark-components-in-flex-4/