Festlegen von Optionen European zum download von Fotos

Similar Questions

• Importieren von Fotos - Fehler-9905

  Hallo Gemeinschaft

  ICH habe mir eine neue Kamera so: Fujifilm X - E2s.

  Nach der first Fotosession wanted ich wie herkommlich bei meiner Fotos NikonD7100 importieren.

  ICH nahm die (verifizierte von Fujifilm) card SDXC (64 GB) aus der Kamera, schöb sie in den SD-Kartenleser meines MacBook Pro und vor OSX wrote: If Karte wird, offne DigitaleBilder eingelegt.

  Nach dem import kam die Fehlermeldung-9905 mit dem Kontext: wurde nicht alle Bilder importiert.

  Strange waren alle Bilder importiert

  Also habe ich different Tests gemacht.

  Meine Nikon D7100 machte hunderte matter a dem Mac mit der gleichen Prozedur - Macht sie jetzt auch nicht mehr ohne Fehlermeldung

  Importieren der Fujifilm Bilder in der Fotos-App geht ohne Fehlermeldung direkt.

  Grave are in der community similar to system gibt/ATM, würde mich ein information-Austausch sehr interessieren.

  MacBook Pro (early 2015); OSX 10.11.6. RAW-update 6.20; Fotos-App V1.5

  Fujifilm X - E2s V1.02, Objektiv 18-55mm version 3.20

  Kai

  --

  Hello community

  I bought a new digital camera: Fujifilm X - E2s.

  After the first photo shoot, I tried conventional import my photos NikonD7100.

  I took the (verified Fujifilm) card SDXC (64 GB) of the camera, she pushed in the drive of my MacBook Pro SD card and OSX wrote: If this card is inserted, open the transfer of images (Digital Photos).

  After you import the error message is come-9905 with the context: it was not imported photos.

  Curiously, all the images have been imported

  So I did various tests.

  My Nikon D7100 made hundreds of imports on the Mac with the same procedure - they now power is without error message

  Import of Fujifilm images in the Photos app goes directly without an error message.

  If you want to be seen in the community as / gave me information exchange would be very interested.

  Sorry for Google-Translator

  Shooting RAW or JPEG?

  If you shoot RAW you El captain and Digital RAW Compatibility installed 6.19 - Digital camera RAW formats supported by OS X El Capitan - Apple Support

  Are you up-to-date? Your profile says you are none, but aren't using OS X 10.11.4 - current software is OS X 10.11.6 and Photos 1.5

  LN

• Wie kann ich verhindern, dass sich beim Anclicken von Fotos der Acrobat Reader opens and then end, dass das Format open werden kann nicht?

  The evil, wenn ich im Ordner Bilder / Fotos einzelne Fotos anklicke, SMS sich der Acrobat Reader und end, dass das nicht werden kann oder die Datei ist beschadigt open Format. DAS nervt! ICH habe schon adjusted, dass ich Fotos nur mit Fotoprogrammen Öffnen will be, das aber trotzdem bleibt problem!

  Hello

  danke für die Hilfe. Habe alles so gemacht. Aber das Feld "immer mit diesem Programm Öffnen" surprising nicht, sondern das Programm gewahlte too equal. ICH habe jetzt den Acrobat Reader wieder deinstalliert, und nun works alles wieder so wie're soll.

  Danke noch bad - auch, wenn der Erfolg nicht der ersehnte war!

• Von nach cs6 Dreamweaver Golive migration

  ICH möchte meine alten Websitzes von Golive cs2 (PPC Version) nach DW cs6 migrate, meine da change Mac G5 aussortiert werden soll und ich sites die demnachst mit meinem neueren Macbook pro verwalten möchte.

  Ich weiss, die ich bought GL2DW extension before. Sharp habe ich nirgends zum Download found. WER kann mit site?

  EIB DW cs6 habe ich nicht found sharp. ICH habe auch keine-Version cs3, bei der Erweiterung available mixed should be sharp.

  Beste Grüße

  Andreas

  The GoLive to Dreamweaver conversion kit was removed a long time ago. From what I remember, it was not very successful. The best approach is to create a site definition in Dreamweaver and set the folder of GoLive web content under the Local Site folder in the dialog for setting up a Dreamweaver Site. Then, you must remove the files GoLive proprietary code. If you have a complex site, it may be better to start from scratch in Dreamweaver.

• ICH habe Adobe Creative Cloud (as Adobe InDesign) downloaded und dann ausversehen Debby.

  Hallo liebe community,

  ICH habe die Testversion von Adobe InDesign downloaded recently. Somehow kam're aber dazu, dass dieses Programm von meinem laptop Debby wurde wieder. Beim Versuch Rubis herunterzuladen alles works actually, bis zum Download Adobe Creative Cloud kommt von're, wo das Fenster mit dem Grünen Balk kurz before're verschwindet wird voll. ICH weiss nicht, was ich jetzt tun soll und kenne mich mit sowas leider nicht aus...

  Wie out ich wieder auf meinen portable inDesign? ICH habe ja noch approx. 26 floor actually

  LG

  A trial of 30 days cannot be used once, so if you have removed the trial by accident, you can not use it again

• Wie kann ich die heruntegeladenen Programmdateien zum 2. evil entpacken

  Wie kann die die Programmdateien zum downloaded 2. bad entpacken ohne sie wieder mit dem Akami believing herunterzuladen.

  you need not decompress files adobe.  they are self-extracting.

  If you have a one file-2 (for win) download is an exe file and the other a 7z.  put the files in the same directory and click (or double-click) on the exe file

• Stapelverarbeitung unmoglich

  Problem: Stapelverarbeitung von Fotos kann mit PS CS6 (are so 2014) auf MacPro keep nicht mehr werden specification. Auf die speaker (internal/external) files (TIFF von Canon EOS - 5 d III Canon EOS-5-DS R developed und mit Capture One Pro7/8) auch liegen, kommt immer die message: Der instruction "Stapelverarbeitung" konnte nicht verwendet werden, da dieses Volume rarely werden kann nicht auf. Wo kann der Fehler liegen?

  Hello

  Please reset the Photoshop preferences after you have saved your Presets (there)

  See FAQ: how to reset my preferences

  Let us know if this helps

  Concerning

  Assani

• EXIF-Daten announcements

  Ich bin noch ein Neuling in der Benutzung von Revel. Daher die maybe something banalen questions.

  1 there are possibility die anzuzeigen Exif-Daten von Fotos eine?

  2 Kann man auch several Ordner von der Fahrradhalter eines Windows PC (Version 8.1) in einem Arbeitsgang

  useful? Could dabei if necessary. Sogar die Ordnernamen ubernommen werden?

  Gruss Mario

  Mario-

  ICH werde Sie lassen das wissen Produktmanagement Ihr interested, is an EXIF-Daten der show.

  Guinot

  Mario-

  I'll be sure to make the product management to know your interest to view the exif data.

  Guinot

• Libretto U100 - HDD protection warning appears during playback of some CD

  Hello

  The sensor HARD drive protection warning when I tried to play some CD. So far, this has happened with 2 CD, one which I have tried to install the drivers (which I "finished work" ultimately and downloaded the drivers from the Web site instead) and the other I tried to install an application (which finally installed but I had to "end task" and eject the cd). After the "end task", I checked if had installed it the application and it was completely installed, but the CD was 'stuck' in the installation dialog screen somehow, and "Finish" screen does not appear.

  I don't think it's the player that I played a cd of music without problem. I think that the drivers are ok, because the buttons on the unit are functioning as intended. The cds are without dust and scratches.

  If anyone has experienced this problem and you know a resolution?

  I look forward to your reply.

  Kind regards.

  Hello

  Strange

  Usually HDD Protection detects the vibrations, shocks and these signs in the computer and head of HARD drive (HDD) moves automatically to the safe position to reduce the risk of damage that might be caused to the drive in head-to-disk contact.
  But I put t. see connections between the Protection of the HARD disk and playback of the CD.

  However, the HDD Protection Utility controls the HARD disk Protection sensors.
  Maybe you should try to reinstall this tool.

  Go to the Toshiba European page, download the utility of the HARD disk Protection 1.01.08 and reinstall.

  Then you can check if the message appears again.

• Re: Tecra a8-103 modem drivers

  Hello

  I can't find drivers for Modem for Tecra A8-103, can someone get me a link to them?

  Kind regards
  Clementine

  Yes, why not, the driver should be available on the European driver download site:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  but can I ask you: which operating system is installed on your machine?

  Any comments would be appreciated.

  See you soon

• Satellite A500 - 19 X - itself starts

  Hello

  I recently bought for a Toshiba Satellite A500-19 x and it's a great computer, but every now and then it powers itself up against the cold.

  I tried to test several times. I'll use it for a while and do a "Shut Down" on windows, but every now and then it lights. Often I will go off it before going to sleep and when I wake the computer is on standby by and do not start the system when I know that I made a SHUT DOWN. I also tried using Hibernate and various permutations but still no joy.

  I tried to read a simular thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51374&start=15&TSTART=0

  This is the same thing, but I'll try to find a BIOS update file.

  Anyone know whay this is happening because it's very disheartening, after spending so much money on what o appeared to be a portable grand

  Thanks in advance. Kuldip

  Hi mate,

  I had a similar problem on my laptop that it powers on himself. Then I went into BIOS and disabled the following features:
  -Wake up on LAN
  -Wake up on keyboard
  Sleep - USB & Charge

  Now this didn't get more and if I could save the battery power a little more.

  In addition, the FAQ section here also shows an interesting article:
  [What I would do if my laptop starts only at 08:20 hours daily? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=76]

  So also try updating the BIOS. You can find it on the Toshiba European driver download page. :)

• Need driver for WXP audio and video for Satellite C605

  I need driver for Nvidia Geforce for Windows Xp or alternative video driver and sound driver.

  Thank you very much.

  Hi vaballai,

  C605 satellite does not for me and I didn't found on Toshiba European driver download page. So I did a Google search and it seems that it s an American model and all the drivers can be downloaded here:
  http://www.CSD.Toshiba.com

  I hope that it helps :)

• Re: NB550D - 'No mass storage devices' during the installation of Windows

  Hello!

  I recently bought a laptop Toshiba NB550D. It goes with Windows 7 Starter. So I decided to change the operating system, I want XP Pro or Windows 7 Edition Home Premium. Because the laptop is not a CD/DVD drive, I looked on the net for Windows USB installation.

  Problem is that when I install the USB, with regard to the partitions, it says I have no mass storage devices. I tried with XP and Home Premium, used 2 different programs to make bootable USB (WinSetupFromUSB and WinToFlash) and I tried with 3 different USBs to be sure that the problem is not of them. Both seem to do the job, but it still says I have no mass storage devices. I read on this forum, found [how to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] thread. I tried this, make an ISO with the built-in driver, made an another bootable USB key with it, but still, when I reached the partitions, they seem to be missing.

  I checked if the partitions will show if I start installing Windows directly from the Explorer to the laptop and partitions are then normally, so it seems that the problem only occurs when you try to install from a USB. But I want a * install own bootable *. I have no CD/DVD lens, so this isn't an option more.

  I'm really out of options on the left, tried everything I thought, it seems that I'm not the only one having this problem, but found no solution to it. Even if I put up with the Starter (even if I don't like), the HARD disk is separated into 2 partitions the two 116GB which is also very annoying.

  I'd appreciate any help! Thanks in advance!

  P.S. I also installed the latest drivers, BIOS seems to be too, but still did not help.

  Hey,.

  Which AHCI driver, I joined?

  Article you found how is just an example and is written for models with Intel chipset. I checked the NB550D specifications and this model has chipset AMD A50M, so you need another driver and the Intel driver will not work.

  So if you are looking for Toshiba NB550D European driver download page, you will see a driver called AHCI driver. This package contains the correct AHCI driver, but the problem is e for Windows 7 only. For obsolete XP it will not designed more pilots and that AMD is brand new. There is no old drivers.

  If you want to only Windows 7 Home Premium that s no problem. Therefore, you can use the mentioned AHCI driver. For example, to create a new Windows 7 bootable USB key with this driver and installation should work fine. :)

• Satellite U400-151 - where to find the drivers?

  Hello

  I need help to find the last version of the DRIVER on my Toshiba Satellite u400-151, but where in what site can I find the drivers?

  Thank you.

  Lööw salvation,

  Satellite U400-151 belongs to the series of PSU44E. Therefore, you can find all drivers for Toshiba European driver download page.

  Check this box:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  Laptop > Satellite > Satellite U series > Satellite U400 > PSU44E

• Satellite X 200-HD - DVD reading problems

  Hello

  I recently acquired a Satellite X 200.
  I decided to upgrade to the latest drivers and applications available on the website of Dutch support.
  Since I now have my first HD-DVD player, I also bought the latest Harry Potter on HD - DVD.

  Reading with no upgrade did not work, so I've upgraded to the HD-DVD player more recent.
  Reading worked just fine now, but when I upgraded to all the other stuff (Broadcom decoder, drivers NVidia, etc.), reading crashes after a few seconds.
  I have now restored almost everything and I can replay the film very well, but of course I would really like to keep my drivers up-to-date. Anyone here with similar experiences and (hopefully) a solution?

  Another problem I have is when I plug in my TV via HDMI, playback stops.
  The TV is not HD, but can perfectly HD signals downsample. I have an XBox 360 connected that I've tested this with, but with the Toshiba, it just won't play.
  Again, all tips are welcome...

  Maurice

  Hello

  I suggest reinstall you the entire system and update your BIOS because it is possible that the software are somewhat overloaded or your system has too many things that probably isn't necessary.

  Especially the problem could probably be a corrupted driver then please try for example a display driver on the European driver download site, maybe better than the Dutch versions work.

  I guess the problem is somewhere in the search on the display drivers, since the question really looks like them.
  Is your X 200 a SLI machine? If this isn't the case, then you could try this site www.laptopvideo2go.com because they have more real pilots and they set up drivers for mobile system.

  Good luck