field of 3D surface

Similar Questions

• How to draw three 1 d vectors in a field of surface?

  Hello world

  I have programming experience, but am completely new with LabView.

  I have data files that contain the same range of wavelength on the first column, light intensities on the second column, and each new text file is at a different angle. The respective angles are written as the headers for each file.

  I have extracted wavelength, intensity and distinct angle into 1-d vectors and you want to draw them all on a 3-d chart.

  I tried to use plots scattered in vector form, traces of contour, plot3Dmesh, etc., and I googled widely and have found similar questions but not answers.

  Does anyone know where I can see specific examples or how to on this subject?

  Any help would be greatly appreciated!

  -Michael

  Hi Michael

  I think I see the problem, if I understand you correctly. You have the trace inside the loop For. Who's going to re - write the plot on each race. I made a few changes to your VI. I'll just write comments on the block diagram. See if that makes sense.

  Joe

• The DC acrobat can be used as a mobile signature with Surface Pro 3 platform and you can use standard industry (field i.e.real) forms which are generally already a secure document?

  Need help with not supported or already obtained docs.

  Hello

  Currently, Adobe Acrobat DC on mobile does not support editing of secure documents.

  Thank you.

• HP OfficeJet 200 series Mobile: 3 Surface Pro WIndows 10 - can't re eastablish wi - fi direct connection

  Hello

  We managed to connect our Surface Pro 3 Windows 10 running on a mobile printers HP OfficeJet 200 series using a Wi - Fi Direct connection not wireless. The problem is that whenever we turn the printer off or go to sleep Surface pro cannot re esatablish of connection with the printer again after on. In the device and printers OfficeJet 200 is still there but greyed out and has a status to be offline even if the printer has been for a while.

  The only way to connect it must make the entire process of reconnection to the Wi - Fi direct connection, for example by typing in the code and wait to see the device is connected. It should not this printer to establish a connection with the surface pro automatically after power on, yet the pro Surface shows that the printer is offline and I know that I had direct Wi - Fi together to establish the connection automatically. Is there a solution for this.

  The problem only occurs when the printer stops and he must turn it off to save battery because what get out us them for field work.

  We discovered that the Wi - Fi Direct is not fully supported in Windows 10. The only way you can reconnect to Wi - Fi direct is if you connect to the printer that you connect to an access point Wi - Fi. If you do this your Wi - Fi direct printer connection will be reset. The downside is that your Surface Pro 3 will lose the internet connection.

  For us, that our solution is not to use Wi - Fi direct and use the Wi - Fi function. We connected the mobile series HP OfficeJet 200 to our iPhone hot spot and we also connected the Surface Pro iPhone hotspot. Whenever we connect our tablet to the hotspot, we can use the printer because the printer is always connected to the HotSpot.

• Create the field of 3D point cloud

  Hello

  There is one called VI: create some height to craete Field.vi control of 3D image surface.

  "Converts a table of values 2D to a 3D height field and apply field to a 3D object that appears in a 3D scene.

  It should be fine for me (this function is interpolated the surface), but I [x, y, z] 3D cloud, where the coordinates are not equidistant points. As I understad the VI can display cloud contact equidistant points. How can I use this tool to display my data?

  I tried the Mesh.vi create to display my cloud of points, but I really need the interpolated also surface. Could you give me a few points to guide how and where to do now?

  Thanks in advance,

  Hi D60!

  Sorry for the late reply.

  Is your problem still not solved?

  If Yes, I looked for examples that use the VI create height field.

  I found a code example on the community: https://decibel.ni.com/content/docs/DOC-4765

  If your data points are sampled on the same rhythm, you can use the interpolation to achieve the same length.

  I guess the simplest is to use the Mathscript node to do this, as in this example: http://zone.ni.com/reference/en-XX/help/371361F-01/lvtextmath/msfunc_interpolate/

  Or this VI could be used for the same purpose: http://zone.ni.com/reference/en-XX/help/371361J-01/gmath/interpolate_2d/

  Let me know if my suggestions helped. If you have any questions, feel free to post them.

  Best regards

• Contacts have ceased to appear in Mail on Surface RT

  Hello world

  I happily use my RT Surface for some time, even if - tonight - I met a strange problem that I can't solve. Specifically, I don't see contacts when entering text in the To: field on the screen of the new messages.

  Say I want to write an email to Jeff. Then I would normally create a new message and start typing Jeff in the To: field. While I'm typing, Mail would check my contacts at the people and list possible address. I can highlight and select the correct contact and start typing my message. Tonight, no match appear in the field, few matter what I type. If I position the cursor in a vacuum to: then it highlights five contacts on the ground. However, as soon as I start typing, they disappear - even if I type the name of one of the five listed contacts.

  I checked in people and all my contacts appear to be present and correct. I also tried to restart the mail client and even restarting the RT Surface itself. However, the problem will not solve itself.

  My app mail and people updated itself a month or so ago, although I have seen no change since more there is no update or Store updates pending.

  If anyone has any ideas, I'd be happy to hear. It drives me crazy. I am currently copying and pasting old email addresses, because it is the only workaround that I can find.

  Thanks in advance,

  George.

  Hi Rohit,

  Shortly before seeing the problem, I installed an app "gmail calendar. I had reached the limit for the number of background processes that I could run, so I disabled the calendar app by default to run in the background. I have now uninstalled the 'Calendar Gmail' app and have returned the application of default calendar as a process in the background. The normal behavior of AutoComplete in the mail client has been restored, although it seems a tenuous link, so I wonder if it's a coincidence. I could try to reproduce the problem, though, as there is a computer for work, I prefer to keep it works well.

  Thanks for your suggestions,

  George.

• BitLocker me locked on Surface Pro 3; I have never set up BitLocker and key is not stored anywhere.

  Hello

  I have a Surface Pro 3, i5 256GB, bought in July 2014.

  I'm the ONLY person has ever touched my 3 Surface Pro.  Nobody else EVER used.  No administrator has already set up or tampered with it at all.  It's a personal computer (no admin would be by any company or organization in a way) and I'm the only person who used it.

  A week after starting, there's my 3 Surface Pro opens a blue screen that says unexpectedly "BitLocker: enter the recovery key to go again" and under the entry field says "to get that key, go to http://windows.microsoft.com/recoverykeyfaq.

  Please note: I am 10 000% CERTAIN that I have NEVER set up BitLocker on my computer.  No one else has.  I am sure of it.  Nobody has slyly had access to my computer.  I am sure of that too.

  But I went on that link above, connected to my account, and he told me that the BitLocker No. key has been saved to my account.  Again... no one else has no non-existent admin not a she and none 'another user' is, because I'm the only person who has used this computer.  Never.  Period.

  I called several times the support (and got hung up twice after an hour during a support call, by the way) and then to the Bank from Microsoft.  All members support confirmed that the 3 Surface Pro (unlike the Surface 2) don't automatically configures NOT BitLocker unless it is initialized by the user at any given time.  I am sure that some may be... I NEVER configure BitLocker on my drive.

  But, somehow, BitLocker encrypted to my reader, and there is no key.

  There is no way around it.  I can't get the key when he never existed.  I don't have not "forget" or "misplace" the BitLocker key, because I never put one in place.

  Hotline helpfully told me it must be a virus (please, seriously? Support always say that just to deny ANY responsibility for anything EVER?) or claims that I have configure BitLocker and forgotten (once again, please).

  I'm Livid.  I've lost the value of weeks of files.  How BitLocker can be put on my drive, and the key is not available through my account?

  Apparently, there is no way to get around, but I still think there must be something I can do.

  Someone at - it never had a similar problem, and if anyone has found a solution?  I need desperately to recover these files.  (Yes, I back up often, but he was still about 2 weeks, and not all received perfectly saved.)

  I would really appreciate if someone knows the tricks etc.

  Thanks in advance to anyone who can help!

  Dave

  hotel123123 GM

  Hello Dave,

  Thanks for posting your query on Microsoft Community forum.

  Unfortunately, my answers also support the statements you receive from Web sites or other technicians. Bit locker never ever get created and implemented by its own. Application of bitlocker on any system requires several step then only it gets implemented.

  BitLocker Drive encryption, help us protect all files stored on the drive Windows is installed on (operating system drive) and on data drives (for example, internal hard drives). We can use BitLocker to protect all files stored on removable data drives (such as external hard drives or USB flash drives).

  If it has been implemented and you do not know the key so there is no way to get the key and you may need to perform refresh, reset or reinstall windows.

  Important: Check out this article and refer to the warning section, you can copy the section warning like warning when you provide Refresh or reset in Windows 8 or 8.1 Windows

  http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be happy to help you.

  Kind regards

• 3 surface Pro stuck trying to start issuing bitlocker recovery key

  My Surface Pro 3 took ages to restart (circle of points spinning for centuries). So I went in safe mode (see photo). He recommended I go to windows.microsoft.com/recoverykeyfaq and I enter the key ID.

  My machine is joined to a domain, but I'm not on the network, because I can't start and even if I was, I'm at me so impossible to get the field

  Bitlocker options give me anywhere to enter the id of the key. I do not have a backup of the recovery key (it was not given to me), and even if I try to reset my pc option it asks installation or Windows recovery support. Which I did not.

  I would have hoped that recovery of bitlocker on the URL above would have given me a way to capture the key Id to unlock bitlocker!

  Help, please

  

  Hello Alec.

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• Try everything LR & PS CC (2015) on Surface Pro 2 Core i5 (1.9 GHz double heart) and 8 GB of RAM

  I needed to get a Tablet for attaching purposes and want to use Lightroom CC (2015) and watched a renovated Surface Pro 2 with the Core processor i5 (the version that has a basic stock of 1.9 GHz speed and is a dual core, 8 GB RAM, 256 GB SSD).

  It has the Intel HD4400 graphics and up to 1.7 GB memory graphics.

  My only other option, that would be running me twice, is a Surface Pro 4 with Core i5, who works at a speed of 2.4 GHz and Intel HD520 graphics (which from what I've read, are very similar to the HD4400 and the difference is not very noticeable).

  Can someone tell me if LR and PS CC 2015 will work on it for basic stuff (tethering, light photo editing, etc.)?  My main goal is engaging with the Tablet as my laptop ordinary (which weighs 7 pounds and a 15 "screen) is not possible for use on the field during the filming (I do landscapes and nature).

  From what I've observed, performance can vary greatly between computers that seem to have exactly the same specifications. Performance can be affected by how you have personally set up the computer and other unknown factors. If you really want to know, just try it.

• Surface Pro 3 and PDF/contract

  Is it possible to create a PDF/contract form so that I can get customers sign using the 3 Surface Pro and his pen.

  Thank you

  Yes, but it is not a type of form field that is used for signatures hand-drawn. You can use the e-sign function or use a pencil annotation. You might want to look into Adobe DC eSign Services: FAQ | Adobe Document Cloud eSign services

• Microsoft Surface Pro does not open in mode full screen without the toolbar on the right projection

  I created an interactive pdf designed for the Microsoft Surface Pro 3, set to open full screen mode. Recently, I think I did something for the preferences settings and now whenever I open the file: (a) I get a warning that it will open in mode full screen (I just want it to open it without the warning); and (b) the toolbar is always right if the presentation is not really in the entire screen. Help, please.

  It's kind of like a dashboard on the right side. The tools that are available are 'tools to fill & sign' (exoanded to: add text, add Checkmark, initial Place, place of Signature). Showing also but not expanded not is 'Send or collect Signatures' and 'Working with certificates.'

  I have been a little more troubleshooting on mine, and now I'm fairly certain that the toolbar appears because the document contains few fields to fill. I removed these items and now the file is opened in mode full screen without the list toolbar.

• Surface flat shipping cost - search for postal code?

  Hello

  Did somebody get BC to find the postcode for delivery to determine what shipping option to offer the customer?

  We have flat surface shipping options.

  For example Sydney is $ 10 but NSW Country is $ 15 and currently customers must choose their delivery option - problem with this is that customer not in Sydney will select Sydney and we loose cargo and do call each customer for the additional quantity = a lot of your time!

  We charge based on flat rates regardless of the invoice total, BC need us to search for postal code.

  Someone at - it a website that got this working?

  Thank you

  It is not possible in British Colombia. You can integrate with AustPost and which will give you a ZIP Code field where customers can enter the postal code and the AustPost will return the rates for it.

  Otherwise, simply create the options set by the user, one for Sydney for $10 and another elsewhere in NSW for $15. Visitors will almost always shoose the correct option.

  See you soon,.

  -mario

• Missing bookmarks in the smart search field in Safari

  Since the release of El Capitan 10.11.6, favorites are missing from the smart search field in Safari to new Windows.  If a Safari any page web (so far), clicking in the search box if poster is Favorites to view icons, as is expected.

  Is this a bug, or can I make some adjustments to bring them new windows?

  Thank you!

  Dick

  Hello Dick Huitema.

  If I understand your message to the right, when you open a new window in Safari, you do not see your favorite icons in the smart search field.  When I use Safari, I always like to have my favorites available and ready to use, so I can understand why you would be tender for assistance with this.

  You probably feel that if Safari is set to open new windows in an empty page. If yours is configured in this way, there is a very easy way to get these favorites icons to show without actually changing any settings. When you open a Web page, you should see a blank webpage with your top search bar and a cursor blinking in the search bar. Instead click inside the search bar right away, click anywhere on the empty Web page and then click on in the empty search bar. You should then see your Favorites icons appear.

  Another option is to set your homepage to your Favorites. You can do it in Safari > Preferences. On the general tab in Safari preferences, select the drop-down menu next to "new windows open with", and then choose favorite. This should ensure that when you open new web pages, all your Favorites icons show immediately. Favorites icons always appear in the smart search field when additional tabs are open as well.

  Here are a couple of really helpfuls articles on Safari Favorites and search options:

  Safari for Mac: Safari search options

  Safari for Mac: see the Safari Favorites page

  Thank you for using communities of Apple Support.

  Take care

• How to get back to 3 text fields in the footer

  When you open a new document pages, the footer contains three default text fields.  I have a document where I removed somehow 2 3 fields foot leaving only 1. I would like to add the other 2 fields in the footer, but I am unable to find a setting that would let me. My search terms are apparently useless because I can't find any thread on point in a search. Any ideas?

  You can not remove the tripartite fields in a header or a footer. If you visit the view menu: display invisible characters, you will probably discover tabs or spaces that forced each cell to the right in your footer. Just remove these external characteristics and you will restore the three cells to your footer.

• iPhone 7 more depth of field for soon?

  The State of 7 and an iPhone sheet has the high depth of field but 'coming soon' did mean that I should wait to buy the phone or it will come with an upgrade later?

  It will come as a software update. Everything you need is in place on the iPhone Plus 7 buy it whenever you want.