FileReference set the directory?

Similar Questions

• How to set the directory for the preview files?

  I have my media defined on an external hard drive, Cache files but Premiere Pro continues to create hundreds of preview files in the default location of the users/username user/Documents/Adobe/Premiere Pro/8.0/Adobe first preview files, fills my main drive and then crashing when it is full. Is the Preview file folder another setting somewhere?

  
  Mac Pro 5.1, OSX 10.9.4

  Settings / file/project Scratch disks.

• The directory entry not addressed. ERROR: OPatch due to a problem in NApply.

  Hi Experts

  I'm trying to run this fix in:

  SPU 11.2.0.4 database and combo OJVM PSU 11.2.0.4.2 (CPUJan2015) Patch 20132517 )

  Using this command

  opatch napply-skip_subset-skip_duplicate

  Returns this error

  The directory entry not addressed.

  ERROR: OPatch due to a problem in NApply.

  points of oraInst.loc to correct location

  $PATH has the following executables: brand, ar, ld and nm

  OPatch is the correct version

  no ongoing process for this db

  Set the directory content patch on 777

  I use this command from the patch directory, Read Me

  I'm running out of things to check. Any ideas appreciated thanks.

  11.2.0.4

  Release of Red Hat Enterprise Linux Server 6.6 (Santiago)

  DA

  Hi all

  I have raised a SR, and this fixed it:

  CD/U01/oracle //db/tech_st/11.2.0/oui/bin

  ./attachHome.sh

• How to set the initial directory

  Using the element "FileChooser' in JavaFX 2.0. How can you properly set the initial directory?
  
  In Swing, you follow these steps:
  

  JFileChooser Choose = new JFileChooser();
  Choose.setCurrentDirectory(new File("."));

  But in JavaFX:
  

  Choose.setInitialDirectory(new File("."));

  doesn't work and causes JavaFX to bomb out when this code is triggered.
  
  Published by: 863626 on October 30, 2011 05:30

  javafx.stage.FileChooser choose = newjavafx.stage.FileChooser();
   File d = new File(getClass().getResource(".").getFile());
  choose.setInitialDirectory(d);
  

• Unable to set the Alias for the current directory (ACD)

  I am creating an alias of CDA who is also required to define the command ' * DBGOUTFILE *'
  "file" argument
  
  I am running following commands
  
  -& gt; DBGOUTFILE "abc.txt".
  ERROR: The current directory (ORA-36780) Alias is not defined. Cannot complete abc.txt.
  I went ahead and tried to set the ADC using the command
  
  -& gt; CDA ' / slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace'
  ERROR: Slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace (ORA-36784) is a directory name or filename not valid.
  
  In which *'/slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace'* track of directory
  
  No idea how to define CDA (which should be the given alias?)
  
  Thanks in advance for the help
  
  Thank you
  
  Joseph George
  
  
  
  

  Hi Joseph,.

  You must first create a directory.
  SQL > create directory

  as '';
  SQL > grant all the Directory public /;

  Now, you must run the command ADB but make sure that the patch has permission 777 for all folders.

  Thank you
  Brijesh

• Unable to set the password in Active Directory 2008 R2 group policy

  We are trying to create a group policy that renames the built-in to our servers administrator account and change the password.  The strange thing is that when we create this Group Policy Computer Configuration > preferences > Control Panel Settings > local users and groups, the password section is grayed out.  We have a test domain, and this isn't a problem here.

  We tried to set the password with different accounts (domain administrator and other members of the Domain Admins group) and different machines (directly on my workstation and domain controller).  Here is a screenshot of what we see.  Any help would be greatly appreciated!

  

  I found the cause in MS14-025.

• Set deny delete the directory for everyone, but still killed deltree!

  Hello

  I have a directory that contains the important code and periodically it is cleared from my machine without my knowledge!  The directory is c:\build and for nmake reasons I subst e: c:\build.

  The removal seems to happen around the time I periodically uninstall programs I want to use the Control Panel - programs and features.  There are system restore points that correspond to the date of the directory disappears.

  I mention all the foregoing in the case where the situation tweaks reminder of someone of something obscure, like the interaction of subst with uninstall.  Note that programs that I chose to uninstall will interact in any way with my file generation.

  OK, now to the question of the subject.  I attempt to deny the deletion of the folder by following these steps:

  1. right click on c:\build and select Properties.

  2. click on the Security tab, and then click the Advanced button.

  3. click on change permissions, and then click Add.

  4 type everyone in the box enter the object name to select text box, and then click OK.

  5. change apply to: this folder only, and then click the check box delete in column refuse.  Note that I still want to be able to delete files (for example, old .obj files) so I don't want permission denied delete to extend to individual files.  I try to avoid any program / system utility deletes the entire folder!

  6. click OK, then apply to the parent area and then Yes to the dialog security of Windows and then on various dialog boxes open, OK buttons until I'm back at the office.

  Test my new Setup:

  -A open a "dos box" cmd.exe with administrator privileges.

  -typed deltree c:\build---BOOM the directory is removed.

  Thanks for your comments on what's going wrong here...

  'Everybody' group includes all users except for anonymous users.  If you connect to the machine, "Everyone" should wear on you.

  Ok...  Here's what I did...

  Right click on C :-> properties-> Security-> Advanced-> change permissions-> Add.

  In the window "Select the user..", typed in "Everyone"-> OK

  In the permissions window: click "Delete subfolders and files" in the column 'Decline', select "This folder only" in the window "apply to", then "Oked" my way, "continuous" past files that he had problems with...

  I then open the C: drive and created a new folder named 'Test' and put an empty file in it. then:

  Do a 'Testing' right click-> properties-> Security-> Advanced-> change permissions-> Add.

  In the window 'Select a user', typed in "Everyone"-> OK

  In the permissions window: you click on 'Delete' in the 'Deny' column selected "this subfolder of the folder and files" in the window "applies to the" and "Oked" my way.

  Then, I went in the C:\ directory and tried to remove "Test" by dragging it to the trash, and by selecting and hitting the 'Delete' key - as well as the removal of the command line.  In any case, he refused to delete for me.

  I don't know what you're doing differently, but for me, it works as advertised.

  HTH,

  JW

• HOWTO set default directory of FRA with the backup file format?

  First of all, Happy home at all!
  
  
  My database uses default FRA - Flash recovery area, also:
  
  db_recovery_file_dest = C:\oracle\product\10.2.0/flash_recovery_area
  
  SQL & gt; list of archive logs
  Database log mode Archive Mode
  Active AutoArchive
  Destination of archive USE_DB_RECOVERY_FILE_DEST
  More old sequence of journal online 14
  Log sequence archive 16
  Current log sequence 16
  
  1. now, when I say:
  RMAN & gt; basis of data backup;
  
  Oracle, create and place the file backup in the directory of the FRA, exm:
  C:\oracle\product\10.2.0\flash_recovery_area\ORCL\BACKUPSET\2009_01_10\O1_MF_NNNDF_TAG20090110T161353_4PKGSKYR_. BKP
  All right!
  
  
  2 but I don't like the name of OMF file generated, I say:
  RMAN & gt; backup of database format 'DD_%d_%s_%u.bkp' TAG = "MyTag01";
  
  
  RMAN put the backup file NOT in FRA directory (such as 1), but now in C:\oracle\product\10.2.0\db_1\database, exm:
  C:\oracle\product\10.2.0\db_1\database\DD_ORCL_42_1AK4FI9L. BKP
  
  
  Question: How can I tell RMAN place FRA default directory backup file - area recovery Flash, but using special own format, no OMF?
  
  Thank you

  If you read from here,
  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/rcmconfg.htm#i1009784
  >
  Creating RMAN in the Flash recovery area files

  This section describes RMAN commands or implicit actions (such as backup of control file) that can create files in the flash recovery area and how to control whether a specific command creates files there or in some other destination. Support in all cases, is that a flash recovery area has already been configured for your database. The commands are:

  BACKUP

  Do not specify a FORMAT of the BACKUP command option and do not configure a FORMAT option for backups to disk. In such a case, RMAN creates backup and copies image elements in the area of flash recovery, with names to the name format for Oracle managed files. >
  If you want to use FRA, you will have to live with OMF, because that's the way it works. If you want to give names of manual backup, it would be on a different location, but not on FRA.
  HTH
  Aman...

• How to set the default browser after update 35.0

  I've just updated to version 35.0 today. Now, every time I restart my browser that asks me to make Firefox the default browser. I've always said yes and check the box to remember. It does not work. Research help and did what was told to go into Control Panel, then programs and by setting the default value for it. That no longer works. I've never had this problem before. I'm at a loss to know what to do. Any suggestions would be greatly appreciated. Thank you.

  You can check for problems with preferences.

  Delete possible user.js and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/Resetting_preferences

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Change the path of the directory for a song

  I have a song in iTunes for which the directory path is wrong.  Therefore, it gets placed in my iTunes in the wrong spot.  I cannot seem to edit the directory path.  This song "merely" has a folder of an underscore (which needs to be deleted) just before the folder of the artist's name and therefore gets placed at the top of my artist list as artist, _.  I have tried dragging it and dropping it into the correct place but it does not stay there.  Please help.
  			 
  With the right button of the track in your library, info, go to the Details tab and enter the correct information of the artist and Album.
  If you've set iTunes to 'keep your Media organized' the file will move to the right place.  If this option is not set, delete the song on iTunes and add it again.

• My Skype ID cannot be found in the directory.

  I have tried my Skype ID and also mail electronic but couldn't find me in the directory. The nickname I had set is not found either. I am registered and also appear online. My friend could not get either of these methods. I have it set to public so it can be found. It just says not: no results found. I use my microsoft account to connect. I've had people me before adding without problem. I use Skype more up-to-date. I even tried to search in my application on Kindlefire. I tried have only connected it on laptop only. Here, nothing seems to work. Please do not suggest that I ask them their email address or ID. I know about it. I want my ID to be available, so I can it add me, as he had been seized.

  It is not possible to search for your own code of Skype. This feature has been disabled a long time ago. However, your friends should be able to find using your registered e-mail address or your correct Skype name.

• Unable to write to the directory root on cRIO

  I need to create a folder in the root directory of my cRIO but when I try to do it via the web interface (Silverlight) it gives me an error 403 (refused).  I can create and edit files and directories in existing files located in the root directory.

  The seller has managed to create a new folder in the directory root on our previous cRIO, but now we are trying to set up another one on our own.  They told me that they don't have to do something special that they do not forget to create this folder.

  Any ideas as to why I wouldn't be able to do this, even if I have all permissions on the device?

  It's confusing, but "all permissions" web interface are only "all permissions for the web server has permissions for things", that's not all. See http://digital.ni.com/public.nsf/allkb/4EBE45E8A816B19386257B6C0071D025 - more precisely:

  Write access

  (ETS, VxWorks) Your target provides write access to its folders and files.

  (OR Linux in real time) If you want to modify or create new folders and files on your target, you can only do in the following directories:

  • /home/webserv
  
  
  • /home/lvuser
  
  
  • /tmp

  Note: Your target deletes the content in the temporary folder /tmp on target restarts.

  Restricting access to the root directory makes the system more robust (prevents the change of important system files).

• How to set the path of the report in a plugin for model

  I'm trying to figure out how to set the path of the report in a plugin process model. I can't find a way to have access to it. It seems this would be a reasonable thing to do since the plug-ins are for the treatment of the results. Does anyone know how to do this? We generally use the sequential process model, but I try to keep my plug-in as independent as possible.

  Thank you.

  If I understand correctly, you want your plug-in, when enabled, change the settings of all other instances of the report OR plugin as their reports share the same directory that your plug-in is configured to use.

  If so, your plug-in can access and change the settings of all other instances of plugin. All instances are passed to all the points of plugin entries in the subproperty of the plugins of the ModelConfiguration parameter table. You can browse this table. Any element of the array with an equal to "NI_ReportGenerator.seq" Base.SequenceFilename is an instance of the report OR plugin. Its report options are stored in the element under PluginSpecific.Options.

  You can change the report options to what you want. Note that the recall of the ReportOptions model is called from template-plugin Initialize entry point, then you might want to ensure that your changes are applied after that, so they are not replaced. To do this, you could make your changes in the Initialize entry point of your plugin and make sure your plugin runs last. To rotate the last, you can set the FileGlobals.ModelPluginComponentDescription.Default.Base.RunOrder in your file of plug-in with a value greater than 0, for example 1.0 (see Help for TestStand > Fundamentals > process template Architecture > plug-in for the model process Architecture > Structure of the plugin sequence files > plugin model of entry Points > Order Execution of Point of entry at run time).

• Call the library function does not find the DLL in the directory where are my LLBs

  I'm using LabVIEW 8.6.  I have a set of screws in several LLBs.  All LLBs located in a directory.  Most of my screws is wrappers for the functions in a DLL.  I was told to put my DLL in the directory where are the LLBs, and apparently this is how the previous programmer has worked (using an earlier version of LabView).

  In the configuration of the library call, I've specified .dll without path.  (This is how we want our screws are an API that will integrate other programmers, so I don't know where they put things and I can't use absolute paths).

  When I insert the VIs in LabVIEW, LabVIEW can not find the DLL and wonder of spotted.  It's just that here in the directory with the LLBs and when I double click on it, everything works fine.  However my absolute path to the DLL now appears in the library to call configuration, and we don't want that.

  Does anyone know how to make this work?  I guess the location of the screw (or LLBs, in this case) should be the current directory and thus Windows search there for the DLL.  However, it seems that this is not the case (in the least, in the latest version of LabVIEW).

  Thank you.

  Batya

  Well someone using your library should not have to dig into your screws and do it all on his own. Instead your library must wrap that and hide disorders it altogether.

  The cluster of error has been added when the dynamic path option has been added. It is not useful hide this error output, so it's always there. As well as the dynamic path, there was the improved error handling added the CLN. One of them is that the level of verification when calling function errors (exception handling) can be specified. I guess that some of these options may generate an error code instead of bring up a dialog box, as they did before and that the output of error code can be useful even in the case of static calls.

  As to what you want to do, I would have long managed that with a DLL that has essentially the same functions as your other wrapper DLLs and an initiliasation function that returns a pointer to a structure of functional distribution based on the actual DLL you want to call. Quite like what an object-oriented function dispatch table is. Then, when your interface initilising you call initialize function and specify the device interface/type that you want to use and after that all other functions take a pointer extra function parameter expedition as the first parameter, in addition to the parameters of the real function. This dispatch function pointer would be just a pointer to a structure that contains the table of function for this interface pointers and the sake of LabVIEW would simply be an integer of size pointer.

  The wrapper function then checks the pointer structure validity send feature and call the actual function with the remaining parameters. It is a C programming and may require a planning and desigining the different interfaces to facilitate this kind of technique of the expedition, but it will certainly pay to long-term and make your library even can be used in previous versions of LabVIEW, so that VB etc. without delicate dynamic loading in the level high, programming environment.

  Rolf Kalbermatter