My Skype ID cannot be found in the directory.

Similar Questions

• HP C4385 don't scan and then cannot be found by the HP Installer...

  A scanning several pages with my HPC4385 yesterday when the Scanner has suddenly stopped at halfway through a page of scanning.  After a new attempt of several times, the software tells me that scanner could not be initialized.

  I uninstalled the software and tried to reinstall and now HP and HP Setup Setup cannot find the printer/scanner at all?

  Help!

  One other thing to note is HP on the LED flashes quickly after turning the power on.

  I also tried to do a full reset by pressing and cancel at the same time and no change in behaviour

  Hi JABLand thank you for the answer.

  I recommend you to perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend then perform a reset of the printer.  Return to the configuration of the system that you were before, by pressing the power and Cancel buttons, then blue, green, and gray buttons.  You can use the reset instructions below:

  Press the black 'Copy' button until the display shows "Reset Menu", then press the "Color copy" button once. Press the black 'Copy' button until the display shows "Reset partial" and then press the button "color copy".  The printer turns off.  Wait 60 seconds and power on the printer at the end of the reset.

  Please let me know how it goes.

• Procedure entry point; Cannot be found in the dynamic link library

  I installed the trial version of Dreamweaver, but after clicking on "Launch" the "Dreamweaver.exe" error message - entry Point not found is displayed. I'm in Windows 8.

  

  The error message for Dreamweaver.exe doesn't feel right at all. In fact, I would say that that said file has been damaged along the way. This could be caused by a multitude of reasons. My first port of call would be to check for malware that may be present in your system.

  More information can be obtained from what is Dreamweaver.exe? Better how to fix Dreamweaver.exe Guide error. Please note that I did not use the Dreamweaver.exe difficulty tool mentioned a few times. In fact I'd be inclined to NEVER download the tool.

  Good luck.

• FTP video .flv to my server, but it cannot be found by the browsers/Flash

  Hello. I transferred my HTML, FLASH and video to my ISP. However, when I enter the .flv url, IE indicates that the file is not found.
  
  http://www.bsrpinc.com/news/video/GWB_OPO_video3.FLV
  
  But when I go to the FTP, this is cleary and I can download it.
  
  Any ideas?

  Also, it does not hurt to give a thank you.

  Thank you. It worked.

• Cannot be found in the location or the search box; I type the words, but nothing happens when I press enter or click the search arrow

  I had the problem of the length so I downloaded Fiefox again. However, now I can't get anything. I tried the suggestion to try the Safe Mode, with disabled modules, but it is still not let me search any URL or keywords. When I type anything in a box, pressing enter or the search arrow does nothing. Help, please!

  Hi Dudica, please make sure that you do not use firefox in compatibility mode: https://support.microsoft.com/en-us/kb/292533

• Downloas file with firefox logo cannot be found in the computer and cannot be used for attachment to e-mail

  I have a "downloads" folder in my documents where all down loaded files are stored. Top down loaded new Firefox browser, it has built its own 'downloads'-in the program. All my downloads I receive mail electronic to the low loading in the "downloads" but when I want the attachment sent to my friends I can not excess of this 'downloads' folder of my email address but the one I've always used before the update to Firefox. How can I access it from Firefox ' downloads so I can attached to my emails? Thank you

  This has happened

  Each time Firefox opened

  Is loaded into the computer new update

  First of all, whenever the file is uploaded in Firefox, you can open the folder it's from the downloads window (see "Open the file folder" Management downloads). In this window, you can see its location.

  To restore the download location for downloads in My Documents, you can change it in the settings or reset the download folder.

  [edit] oh, and exactly how you want to download the file, you do not find later? You may be using "save the link under" or "save the Page under"?

• Cannot be found in the menu start - result is completely white.

  Original title: find search indexing index reindex re-indexing research research research service troubleshooting troubleshooting

  When I try to enter a search in my menu start the place where I would normally find results is completely white.

  I've looked everywhere and I can't find a solution to the problem.
  Please help me...

  Hello

  Were there any changes made on the computer before the show?

  Method 1:

  I suggest to see the links and try to run the Troubleshooter:

  Difficulty of Windows Desktop Search when it hangs or no display of results

  http://support.Microsoft.com/mats/windows_search/en-us

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 2:

  Check the link and try to rebuild the index:

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  Check out the link for more information:

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Method 3:

  See the link to use the (sfc) System File Checker tool to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• EMP 11.1.2.3, workspace cannot be found in the Explorer tab.

  EPM 11.1.2.3 installation has been as follows .

  http://postfiles14.naver.NET/20130802_157/riderchi_1375420975480Y7KSv_JPEG/0802_01.jpg?type=W2

  However, if access to the Workspace can't see Explore .

  http://postfiles9.naver.NET/20130802_200/riderchi_1375420976067k46u6_JPEG/0802_02.jpg?type=W2

  What more do Je have to install ?

  My problem during installation of Oracle HTTP Server Foundation service did not will.

  V37950-01 have been re - install the download of the https://edelivery.oracle.com/.

  If the troubleshooting.

  Thanks also to the above.

• What site opens in the Muse a sampled image of error report is displayed, but the image cannot be found in the active panel

  When I open my file of site in Muse I get an error message that reports an oversampled image file.

  I carefully go through each item in the active panel but don't see any error or icons with the '+' for an oversampled image.

  How trap, find or change the mystery picture think Muse are oversampled?

  Popular opinion.

  Tim

  The initial problem noted here since mid-2014 was due to a bug when a rounding error that occurs when a cause of the image resized to fire by mistake, the warning message. Quite a few releases of Muse was treated there. It is possible a similar bug exists in some other code path or there may be another problem.

  More rational than before is likely to make you reach the .muse file [email protected] as well as a link to this topic for the context.

  If the file is larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. At least initially, we should not need the related assets, just the .muse file.

  Thank you.

• Eclipse using Glassfish 4.1 web project cannot load libraries in the directory modules

  We installed the latest "Glassfish tools for Luna" (updated October 2, 2013) and created a new dynamic web project in Eclipse using Glassfish 4.1. When trying to annotate a class with "javax.enterprise.context.ApplicationScoped", he complains that "ApplicationScoped cannot be resolved to a type" well imported as 'import javax.enterprise.context.ApplicationScoped.

  Check the 'glassfish-4.1/glassfish/modules/' directory and it has cdi - api .jar that contains the class ApplicationScoped. But when checking for libraries project in eclipse, impossible to see such a pot.

  My configuration:

  Eclipse 4.4

  SDK runtime glassfish java: java 1.8.0_20

  Java development kit project: java 1.8.0_20

  Level of the compiler of the project: 1.8

  Aspects of the project: module web Dynamic Java 1.8, 3.1, Glassfish, Web 4.0 Extensions and Javascript 1.0

  How to solve this problem?

  Thank you.

  It seems that the cdi - api .jar is new to GlassFish 4.1 and tooling does not yet account for her. I'll open a bug as a result. In the meantime, you can work around this problem by manually adding the jar to the path of the project as an external library is compiled.

• How can I add an additional search engine, if it is not found in the Department of the add-on?

  my favorite search engine cannot be found among the Add - ons.
  Other browsers out to add any user-defined what research enfine.
  Why Mozilla does not offer important characteristics of Thais?

  Kind regards

  They do, visit mycroftproject.com / and install plugins to search more.

• ITL file cannot be found or created

  When I try to open iTunes I get error, "itl cannot be found or the folder created.  I tried uninstalling iTunes and reinstalling, but it still doesn't work.  Is there any solution for this?

  Hi, Dwether.

  Please visit Apple support communities.

  I understand that you receive an error when you try to open iTunes.  While the article below is not labeled for your specific question, I recommend you have completed these steps still apply.

  If you do not see your content once you update iTunes

  See you soon

• HP Laserjet 200 M276 Color MFP: HP Laserjer 200 color than MFP M276 found on the wireless network

  Printer is connected to the wireless network, but cannot be seen by the computers on this network.

  The printer has been installed on my home network for 6 months and works well.  Now it is found on the network.  Power cycle the printer, and he started to work for one night.

  The day after the printer is found on the network by PC, running Windows or Mac 8.1 on the network (under Leopard through Yosemite.

  Reset printer settings by default, in the wireless network data and verified that it is on the network (wireless diagnostics confirm the network name, config, port and switch Diagnostics).  Still cannot be found on the wireless network.  I know that it is on the network, because it can access internet functions.

  Repeated configuration via USB for settings wireless program.  Receive error message indicating the wireless settings have been communicated successfully to the printer, but the printer is not found on the wireless network.

  Not cool.  Looks like I have yet another broken HP printer.  I don't know the process.  I called the warranty and they are sending me a refurb printer.

  Returned to the HP after 10 years.  Looks like it was a mistake.

  Hello

  Try restarting your router by unpluggin power for a while, let him 3 minutes to start and restart the printer.

  Click the icon on the printer wireless - what is the listed IP address?

  Can happen that the intellectual property of the Explorer of your computer?

  You can see any difference after the reboot of the router?

• Change the path of the directory for a song

  I have a song in iTunes for which the directory path is wrong.  Therefore, it gets placed in my iTunes in the wrong spot.  I cannot seem to edit the directory path.  This song "merely" has a folder of an underscore (which needs to be deleted) just before the folder of the artist's name and therefore gets placed at the top of my artist list as artist, _.  I have tried dragging it and dropping it into the correct place but it does not stay there.  Please help.
  			 
  With the right button of the track in your library, info, go to the Details tab and enter the correct information of the artist and Album.
  If you've set iTunes to 'keep your Media organized' the file will move to the right place.  If this option is not set, delete the song on iTunes and add it again.

• time capsule airport cannot be opened because the original item cannot be found

  I just purchased a Time capsule airport and can't install. It flashes orange, and although that Time Machine backs up on it, and I can access the internet, I don't remember upward the back-up because I got the following error message:

  "'Airport Time Capsule' could not open the original item cannot be found".

  The printer is connected to the Capsule by USB works.

  I'm installing via an iMac.

  Help, please!

  Thank you

  You first need to determine what is at stake that indicates the LED "blinking orange.

  To make your iMac:

  • Run the AirPort Utility.
  • Select the Time Capsule
  • In the pop-up window, all questions will appear in the status section.

  Please post back your findings.