Files window is always displayed at the top

Similar Questions

• Since the installation of Windows 10 why I looking for recently downloaded messages in the Inbox? Before, they came always located at the top.

  I don't know if it's really a problem with Windows 10, but I never experienced it until after the recent upgrade of my operating system. Before the upgrade, new e-mail messages were always displayed at the top of the Inbox window, and I didn't have to scroll down to find them. Now, the newly downloaded messages no longer appear at the top, and I have to search for them after downloading.

  Click the heading labeled DATE sort by date. Click on DATE again to reverse the sort.

• When I open the files they are always displayed as a default icons, I would like to change the default setting so my files are displayed as a LIST. How to change this default setting.

  When I open the files they are always displayed as a default icons, I would like to change the default setting so my files are displayed as a LIST.  How to change this default setting.

  Hello combat

  
  Open Windows Explorer/Tools/Folder Options

  On the general tab, click the options you want.

  In the view tab, click the options you want.

  On the view tab, click apply to all folders.

  Click Yes, then OK
  
  .

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• file window can be put in the background

  Hello

  Please see attached screen. I just have to upgrade to Dreamweaver CC and it has an annoying bug, file window is always above the code editor window and cannot be put in the background as he could, for all other versions of dreamweaver that came out for 10 years. The Panel itself seems to have no setting that I can find is

  

  Here is the solution for Mac:

  Dreamweaver CC menu > window > Framework Application (uncheck). The bug will disappear. If you prefer the enforcement framework, check again and the bug will not return.

• Loginoff, save your settings and Windows stops no display on the screen, every time I stop my Windows XP Professional SP3

  Hi all

  Hi Patfaucher1974,
   
  Your question seems incomplete. When you say "Windows is no display on the screen stop" means that you do not get the screen that says "closing Windows"?
  -You are unable to shut down your computer?
  -If so, can remind you to make changes to your computer between the calendar when things worked fine and now?
   

  Try the steps listed in the article below and check if that helps you:

  Your computer stops responding when you try to shut down in Windows XP

  Additional reference on:

  Advanced Troubleshooting for shutdown problems in Windows XP

• Can someone help me with the error message C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?

  Can you help me? I can't open my Jpeg images in Windows Live Photo gallery. I get this error message;

   C:\Program Files\Windows Live Gallery\WLXPhotoviewer.dll the system cannot find message for message number 0 X %1 in the message for %2 file?
  
  
  I use Vista Home premium 32-bit.
  Cheers, Rob.

  Hi robgrimes

   

  As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20

   

  I hope this helps.

• Why windows media player displays only the names of original files?

  Windows Media Player only shows the original file names that can be confusing if I changed the name of a file. The name of the file (usually audio files) is correct in Windows Explorer, but in the component list of WMP, it's often the old file name. Why is this and what can I do about it? Advice would be appreciated. TA. Kevin.

  What the file type of these music files (MP3, WMA, WAV...)?

  WMP usually displays the title tags of the music file, which is independent of the file name. However, WMP always displays the current file name in the path column of the file, which can be activated by right clicking on a column header and select choose columns.

• I lost the file, Edit, tools, Options etc. from the top of my browser window. How can I fix it?

  At the top of my browser page, that I used to have files, edit, tools, Options, etc. helps well disappeared. How to make a comeback?

  This has happened

  Each time Firefox opened

  == do not know when, but after an update, I think.

  In Firefox 3.6 and later Windows, you can hide the menu bar on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press F10 or press and hold the Alt key to bring up the menu bar temporarily.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select to show or hide toolbars (click on an entry to switch from the State).

  See also what happened to the file, edit and view menus? and http://kb.mozillazine.org/Toolbar_customization

• 2600n: printing on Windows 10 always prints to the file rather than to my 2600n

  I bought a new laptop which had 10 (64-bit) Windows installed already.

  When I connect my 2600n printer to the laptop via the USB port and attempt to print anything, the print function recognizes the 2600n is available, but the software behaves as if I chose the option to "Print to file" instead of send data to my printer.

  On the Microsoft Web site, I tried a Windows 10 compatible driver for the 2600n.  I had to download the Microsoft Update catalog that I searched.  The catalogue lists the 2600n, but it does not list Windows 10 like it in support.  The latest version of windows that supports 2600n is Windows 8.1.

  HP has a driver for the 2600n that works on Windows 10 (64 bit)? ... or where can I find?

  I noticed that my 2600n is not the default printer.  Even though I chose the 2600n for the print operation, Windows 10 boiled corn have a bug in the driver and it always sends to the default value.  The default is to print to a pdf file.

  3 times in 3 different ways, I tried to change the default printer to the 2600n and my attempts have been ignored.
  The 3rd time, it looked like it changed the default printer of what I wanted, but when I went to use,.
  It's the same old problem.  Then I left the print operation and came out from the browser where
  I tried printing and did something else.

  I used the NotePad editor later, when I thought I would try to print something new and this time it worked.

  Apparently change the default printer has not taken effect properly and I had to get out of the service where I was doing printing before it would work.

  So the solution is to change the 2600n to be the default printer... and wait a little and do something else.
  out of everything you did before you try again.

• Windows cannot find back to the top before you reinstall Visa Business x 32.

  As I had problems with windows, the decision was made to reinstall Vista Business x 32; has SP2. Before that, I did a return upwards using the windows towards the high utility (I had done this for the last 18 months). I can find the back of the files on the external hard drive (PC name, backup set of 1st registration, I've done the reverse and then the following dates that I saved the last date with 12.8 GB). I get the message that it is not save ti available use. I tried to use the method advanced and always impossible to get anything. I tried to boot in safe mode and got the message that this operation was not available in safe mode. The problems that I had with windows has been fixed with the resettlement, but I would really like to get my files back.

  Thanks in advance.

  Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.

  Here is an article on the advanced use of restoration (during normal restore does not work): http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that the backup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps. If this isn't the case after back and we're going to try something else.  It may have something to do with permissions or the files there and we will discuss these options (and perhaps other institutions).

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you print an email subject line is displayed at the top left, can I change it to my name?

  Changed computers & previously my name appears at the top left when I printed an email. Work in a large office, and all use the same printer, so now when I print an email its not so easy to find.

  Select E-mail
  File > print preview
  a window opens showing email print.

  Click on the "Page Setup" button
  Click on the tab "margins & header/footer".

  Under "headers and footers".
  Click the first drop-down - menu and select "Custom... '
  by default it usually says "Title", which refers to the "subject".
  A small window will open allowing you to "' enter your custom header / footer text '."
  Enter your name and click OK

  The preview window is updated so that you can see the changes.

• Firefox always displays all the possible options in the context menu

  When I select some text on a web site and right-click, I get a popup menu with about 50 options.

  Some earlier, archived posts have addressed one of the causes of this - extensions - but disable my extensions and restarting did not work for me. I always get the context menu options-50.

  Here are the previous posts:
  https://support.Mozilla.org/en-us/questions/955270
  https://support.Mozilla.org/en-us/questions/951383

  Do a clean reinstall and remove the Firefox program before (re) install a new copy of the current version of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  • 29 Firefox: http://www.mozilla.org/en-US/firefox/all.html

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Remove the Firefox program before installation newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Get the text to display at the top of the following pages

  There is a field to half way down my report with a formula column as its Source. This column is based on a 2 page long reusable text file. I'm trying to get to each page of the report beyond the first page to display this text starting from the top of the report, but instead, all successive pages show the text starting at the point where the field is actually located, which is halfway to the bottom of the page. Can someone tell me how to proceed? Thank you.

  The problem may be that the fields above your text field and the images have vertical elasticity set to fixed. Change it to Variable.

• How can I get more of my character to display at the top of the display screen?

  Before you download the latest Firefox, my character at the top of the display showed at least 1/2 on firefox. Now, is that the ears. How can I show more of her? Stupid question, I know, but it's bugging me.

  I think you need to show toolbars as you can so that your character can have more space so it can be displayed more.

  How to show or hide various toolbars?

  • https://support.Mozilla.com/en-us/KB/how-do-i-customize-toolbars#w_how-do-i-show-and-hide-the-different-toolbars

  Check and tell if its working.