Filter with interactive map problem

Similar Questions

• interactive map problems

  I'm doing an interactive map and I'm in trouble. Home is so far my card, but I can't figure out how to make sure that when each button is clicked, it is pushed in front of the other buttons so that it covers the. Any help please?

  It is strange that you say you found how to use swapDepths for buttons, because there is no swapDepths for buttons! But it's not important because you say you use MovieClips as buttons and it's good.

  If the code you showed is on a keyframe on the timeline, they you use an appropriate style of code. Do you properly use the swapDepths method. And if you use too vague you might get into trouble. We will first address because it's the easiest.

  You're talking about covering a 'sex' and using the code for each 'layer '. The layers that you see in the authoring environment are just a tool to help you stack things and keep your work organized. When you publish your swf layers to go and there is no way to access it with actionscript and do something with them. Articles are published, they receive a depth (stacking order) based on the order of the layers, but the layers themselves disappeared. Then swapDepths manipulating layers he manipulates movieclips.

  It is a small distincition, but it is important to understand how Flash works. If you want to learn more about the extraction of this article.

  http://www.Kirupa.com/developer/ActionScript/depths.htm

  Very well. So if you discover swapDepths you will see that it belongs to the movieclip class and that it only takes a single argument, and argument can either be an another movieclip or a number.

  So, it won't work. (As you already know!)

  someClip.swapDepths (clip1) (clip2) (clip3);

  I think that what you are trying to say is that when they click on flash 'North' should share upward and the South, East and West, must be less than North. But you can not just shortened it how you have by adding extra bits on the method. There are many ways to deal with this and really they all depend on what you spent and what other points you have and where they are.

  Personally, I would probably watch the second way to use swapDepths and use it.

  this.swapDepths (1000);

  I tell you by using a number of flash to enjoy "this" (I'll explain that in a moment) and put it on a depth of 1000, and, if there is anything 1000 already to make the depth 'that' came from. So for each of my clips, I would have this code:

  north.onRelease = bringIt;

  south.onRelease = bringIt;

  east.onRelease = bringIt;

  etc.

  Then, I would define a function:

  function bringIt() {}

  this.swapDepths (1000);

  }

  Notice what I did here. I attributed to the same function to manage the output for each of the elements. This will save me from having to keep event handlers four update every time I want to make a change. A function handles all and so they will all do the same thing and I can avoid typos in one place, but not the other, etc. It's a good thing.

  The next bit is that since I made a function to manage them all I have to do this more general and less precise function. I can't very well have:

  north.swapDepths (1000);

  Inside the fuction because what happens when South has been clicked? So I use 'this' to refer to the element that was clicked.

• Reading with interactive pdf problems

  I just bought an interactive pdf which includes links to audio and video files. However, none of the files work when the pdf links are clicked, even if I've adjusted my preferences of Adobe Reader as advised and have extracted all the audio and video files of zip downloaded files in the same folder as the pdf file. Can anyone help?

  This problem has been resolved thanks. Initially, I got messages saying 'the file cannot be present' and then something not having the good "decoder" installed. I then received a message as an attachment, click on "trust this document always ' and the problem was solved.

  Moreover, the files were mp3s and Quicktime Movie files. My version of Adobe Reader is 11.

• Problem with the Date Max filter in the mapping

  Hello

  I tried to put a filter on my mapping as mentioned below: -.

  TABLE_SOURCE. DATE > (SELECT NVL (MAX (DATE),'' 01-JAN-1900) OF TARGET_TABLE)

  I get the below mentioned, error in ODI 12 c performance: -.

  Aggregate expression is in the filter, but no aggregate expression in the select list of the query for target: TARGET_TABLE

  All I'm doing is making sure we receive only new records from the source. When I remove the NVL of the query, it works!

  Please help me solve the problem.

  Thank you and best regards,

  PV

  Hello

  Write your Condition of filter in this way:

  SRC_DATE > NVL ((select max (TRG_DATE) in TARGET_TABLE), January 1, 1900 "")

  
  

  
  

• Interactive map with Flash

  I'm a bit new to Flash.
  
  I am creating an Interactive map of the State of Tennessee, reflecting every county in Tennessee. Below the interactive map will be a list of the names of all counties. When a user places the mouse over a name, then the county on the map will change color. Essentially a substitution effect. When the user clicks on the name of the county or county on the map, then the user will be directed to a page that displays information about that country. The information is retrieved from a database.
  
  All information is useful at the beginning of this interactive map.
  
  My main problem is to create the animated buttons on the interactive map in flash.

  Aasin,

  I would like to start off the coast with a detailed map of good quality in tennessee that all counties marked on it and is of a size suitable for your final flash. Then put this in Flash and use the drawing tool to draw around a County, press F8 to convert it to a symbol, converts it to a button and then use keyframes in the button to give it different roll on, and then click effects. Repeat for all counties, delete the original image that you used to draw around and then you have an interactive map. You can thenassign actions to buttons which loads to the top a movie clip under the plan and that fill with the contents of your database. I did something to it earlier, and even if it's your time shouldn't be too difficult for you. He just keep this high building of button and save and test regularly.

• Slate 7 voicetab: problem with Google Maps.

  Friends, long since I've updated my tab to Kitkat of JellyBean, I have a problem with Google maps. Whenever I use Google maps, it freezes the tab at some point and then I have to restart the tab. I updated the app several times and restored too. A tab reset but still having the same problem. What should I do to prevent it? At the moment I use 'maps', but I need to use Google maps. Please give notice to fix the problem.

  Hi there @Mono45
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that your 7 Slate freezes on you when you try to run Google Maps. I'm happy to help you with this.

  I would recommend that you go well following linked page from above and in the section on the use of "find the solution that fits...." ' article 'an apps constantly reply on your HP Tablet.

  HP tablets - tablets hangs or freezes (Android KitKat, Jelly Bean)

  If it works for you, please mark this message as a solution.

• Problem with interactive buttons

  Hi all

  I seem to have trouble with interactive buttons.

  InDesign CS5 - Version 7.0.3

  I create a document with 2 pages (Pages face is checked).

  Add a text box to each page, Page it says "1" text box and two page says '2 '.

  Text box on page two I right click and select Interactive | New hyperlink Destination - Type: Page, Page: 2, Zoom adjustment: fixed

  On the Page, one I add a sample since the button panel button.

  I select the button and then display the button panel.

  I delete the default "Go To URL" action and add a 'Go To Destination' action using the event to "on release".

  When I preview the page in the "Preview" Panel, I click "Play" and that he can see the first page and the (large) button, but when I click on the button, nothing happens.

  Changes of mouse I have the mouse on the button, the button state changes rolling State... everything seems good, but it is not actually exercise the action of going to the next page.

  I tried the export in PDF and ensuring that 'Include bookmarks' and 'Référence' is checked so that ensuring that 'create PDF containing the tag' is checked, but the exported pdf file does not work the action!

  What I am doing wrong? It seemed so easy when I watched some video tutorials on how to do it.

  Any help would be appreciated.

  Thank you

  Andy

  You export to PDF (Print), by the sound of it, and the buttons do not work in Print PDF. Try to export to PDF (Interactive).

  And ID update for 7.0.4

• BlackBerry Smartphones Google Maps - problem 'failed to connect '.

  For the last two weeks, I started getting a "connection failed" problem with Google Maps on my BB Torch 9800.  I tried to pull the battery, reinstall Google Maps, working on a connection wi-fi-etc. but logging into Google Maps still does not work.

  The Google Maps app works fine, otherwise.  The only problem is that I'm not able to get my "favorite places" when I log in the application with gmail and my password.

  Any help would be appreciated!

  Equals your account password Google or you have changed it in the last few weeks? So if you check under your application's permissions are your Interactions and user data are configured to allow. Restart your device and try again

• Interactive map of cruise

  My wife and I started a 3-year cruise on our sailboat. We would like the trip with a map of the northern hemisphere, showing the highlights of our trip as links that can be clicked on the map.
  
  We use a Mac with Dreamweaver MX. I'm flying blind here because I am a sailor and not a webmaster. What I would like is essentially points (or other) on the map which can automatically open a small JPEG file when the cursor is over them. Once the picture is open, you can click on the image that would take you to a html page photo essay of what we have lived in this area or this port.
  
  What I'm doing so far is to make a page with a map, then add "layers" within each layer are a Radio "button when the cursor is above, it displays a jpeg image by"behavior"called"window open fever". It works pretty well so far, but I can't make a connection in the JPEG file. Here is the page that I have (this does not as much as I'll probably start again). Here is the link http://www.svtropicaldance.net/Cruisemap/interactivemap1.html
  
  Any ideas as a way to achieve what I want to do? I'd appreciate any help, even a purchase program that would make it easy. The problem is to get the link to the page of Photojournalism.
  
  Thanks in advance.
  
  This is our main Web page for our adventure. http://www.svtropicaldance.NET

  Success,
  After 7 hours, I was able to replicate what I did 4 hours ago. Once you get something there are moments where you don't know what you've done and have to retrace steps, it seems like more work than it should be.

  Here is the link to replicate what you have done, I have only one link and I quit for the day. Maybe have a beer.

  http://www.svtropicaldance.NET/cruisemap/interactivemap1.html

  I have some basic steps in the process that I did. I still think it should be easier.

  Indications of the interactive map, I did with Radio button and links Studio VII

  1. open the new page
  2. Insert the image or a background set, as in the map page, map. (save)
  3. Add the layer and move the layer nearby where you want
  4. click inside the layer and insert - Form object - 'Radio button' and click on 'Back' once.
  5. Select INSERT, then click on 'Studio VII'
  6. follow the Add instructions to display and image shim,
  have a caption and descriptive text or not.
  * Don't forget to place the photo in the chassis OK click.
  (Note: I can reposition the offbeat photo by entering in the upper left corner)
  corner and moving it where I want) I can also make the visible layers
  by clicking on the yellow markers (c) at the bottom of the page. (Save)
  7. click inside the popup box offset to select and add the behavior of studio VII
  ' showpick by PVI "enter the same photo.
  8. in "Advanced Layout" (layers) write them eyes closed and click on it to open it
  each of them
  7. all of the popup box offset to highlight and note "image at the bottom of the frame bar and.
  Add the link you want.
  8. Finally, together the original box between the ' radio button and add once more the
  behavior of Showpick by PVI and add the same photo that is in the popup of offset
  Once again

  A lot of work, but then I have a lot of time on the passage.

  Thank you, Tim. If you have any other suggestions or if I do a lot of work busy please let me know.

  Thank you, thank you.

• Creating an interactive map?

  Good afternoon

  I'm hoping to create an interactive map, where if you hover over a part of the photo card appears.

  Many years ago, I used to be able to design a similar thing using the Macromedia Flash software, I realize account changed to Adobe Flash, then animate CC. This sounds like something that I would be able to do now in Adobe animate CC and if so, I am easily able to save interactive as HTML5 file, so that it can be viewed on different devices?

  Any help most appreciated.

  Thank you very much

  Yes, you can use animate pro for this.

  you would animate pro and start creating an html5 project.  your interactive map could be created using any code if you use the buttons to the constituent parts of your card and add the popups for the frame.

  If you want it to work with touch devices, you probably want to use the code to toggle popups on touch or mousedown events.

• option to zoom in an interactive map

  Hello! I have a scene with an interactive map with buttons. I want to add an option for people to zoom in and zoom out the map zoom without losing the interactive buttons. Is - is this posible? Sorry for my ignorance, I'm new on board

  What you need to do is to give them a unique class name. Then, you must have the code for each of them.

  Example:

  2 the images named 1, jpg and 2 jpg

  'First' on behalf of class 1 and image 2 has class name "second".

  then you code in compositionReady is:

  .zoomer ({$(".first") sym.

  Source: 'images/1.jpg.

  });

  .zoomer ({$(".second") sym.

  Source: 'images/2.jpg ".

  });

• Help with interactivity iPad in Indesign

  Hello

  I'm creating an iPad app and need help with interactivity. I have 4 buttons on my page and each of them, when you press on, shows a new info box I realized by using the States of the object. I also created a menu in the form of a scrolling image scrolling in the direction from left to the right of my page. It is however, where I have a problem - because the image that I drew for the frame floating in two covers of my four buttons these two buttons do not seem to work. Anyone know how I can fix this or any way around this problem?

  Thank you very much

  Steph

  Redesign page and opt for an MSO for the menu instead of one

  scroll frame.

• FDM cards stuck on 'validate' = > maps problem

  Hello
  
  
  I have a little problem with the mapping by FDM
  
  
  In my source file I have several entities, but I'm loading entity only 3 so I did:
  
  EXPLICIT MAPPING
  entity1 = > entity1
  entite2 = > entite2
  entity3 = > entityt3
  
  
  AS THE MAPPING
  * = > IGNORE
  
  It works, but now, FDM is blocked at the validation stage as EEP say that some accounts are not mapped. This is right, but all of these accounts are owned by entities that are not mapped (IGNORE) so I don't understand why FDM is aking me card these accounts?
  
  Do you know how to avoid to map these accounts?
  
  
  Thank you

  You can not avoid mapping of these accounts. All the values of source for all active dimensions must have the mapping is valid regardless of the mappings in other dimensions, even if it is IGNORE. That's why you have som form of cartography to catch these accounts. Or you can also put a script to import against the entity field in the Import Format that allows only data for the 3 entities, that you must load to be imported and all other data is ignored

• Location map problem

  I have problems with the map of the location on the elements. It appears empty and cannot locate any new photo of my photos or the tag. Have tried restarting PC running a software update and but no luck. Any thoughts? Thank you

  The PSE Organizer map was a map of Yahoo. Yahoo has discontinued its mapping service, so it does not work for everyone and there is no cure, I'm afraid. He just disappeared.

• Interactive map of manufacturing?

  Hello world

  For a project, I think to do an interactive map of the cemetery on my College campus. I would like that the plan of the function as this map here: http://www.hamilton.edu/virtualtour/index.cfm I will start by making the plan in Illustrator, but here I'm not really sure where to go because I am new to Flash. I want the name of the element, the mouse is no longer to be displayed and then when clicked on a box comes up with additional information. If the item the mouse is on can change the color that would be nice too. Pan and zoom would also be great if they are not incredibly difficult. Are there tutorials for these sorts of things?

  Thanks in advance,

  Nick

  The stuff of movieclip and table is pretty basic, so it can be hard to find tutorials.  If you want to try to find a tutorial you should search Google using terms such as "Tutorial AS3 Array".  What I recommend is that you will become familiar with these classes by looking through the help of Flash under their sections of class documentation.  Search for properties, methods, and events that support in order to familiarize yourself with what they involved.

  To control the visibility of a movieclip, it has a visible property... so set movieclipName.visible = true; It brings up and setting it wrong does disappear.

  If you were to place a textfield inside the movieclip, so you can target the textfield object to assign the text to help...

  movieclipName.textFieldName.text = "of the text."

  As far as tables go, if you have any familiarity with them, a table is essentially a set of data elements, each of which is targetable by an index (from 0 to length-1) number.  There are a number of ways to assign data, but maybe in your case you can do it manually one by one, using an object...

  var yourArray:Array = new Array();

  yourArray.push ({doc: 'some short text presentation 0', longText: ' some long blurb 0 ""});

  yourArray.push ({doc: 'some short text presentation 1', longText: ' some long blurb 1 ""});

  During this time, you need a way to representatives of each element (movieclip) with which you want to interact with the data in table, so that can be done by assigning the index number of its data as a property of them point (movieclips allow you to dynamically)

  Item0.indexNum = 0;

  item1.indexNum = 1;

  Then, when you rollover one element, you can acquire this indexNum property and use it to get the data and plant it in the textfield of the rollover movieclip...

  Item0.addEventListener (MouseEvent.ROLL_OVER, backImgKey);

  item1.addEventListener (MouseEvent.ROLL_OVER, backImgKey);

  function rolloverItem(evt:MouseEvent):void {}

  movieclipName.text = [evt.currentTarget.indexNum] yourArray;

  movieclipName.visible = true;

  }

  Item0.addEventListener (MouseEvent.ROLL_OUT, rolloutItem);

  item1.addEventListener (MouseEvent.ROLL_OUT, rolloutItem);

  function rolloverItem(evt:MouseEvent):void {}

  movieclipName.text = "";

  movieclipName.visible = false;

  }