Filtering table using Multi Select choice

Similar Questions

• Region of report filters by using Multi Select lists

  Could someone please advise me accordingly.
  
  I want to use several multi selection lists to allow a user filter data in a report. I have a button for the user to send the page and apply their selected criteria. In my application I have want to reference the items select direct multi.
  
  for example
  
  Select studentid, studentname
  of student_table
  where of course in(:p1_course)
  and the Department (: p1_dept)
  and in the year (: p1_year)
  and... etc etc.
  
  My attempts to do so to this day, have been in pallets. I was hoping that one of you experts may be able to advise how to do this step by step.
  
  Thank you
  
  Steve C

  Hi Steve,.

  The results of the selections multiple lists would be in the format has: b: c (that is to say, the values separated by semicolons), so your WHERE clause must use something like:

  OÙ ' :' || : P1_COURSE | ':' AS ' %:' | COURSE | ':%'

  or

  WHERE INSTR (': ' |: P1_COURSE |) ':', ':' || COURSE | ':') > 0

  Andy

• What is the syntax for creating a global temporary table using a select query

  HII
  I create a global temporary table using a select query... How to speak of "on commit preserve rows ' who?
  
  
  create a table temporary global t1 select * from trn_ordbase on the lines of commit preserve;
  
  but this is an invalid syntax, then how to talk on commit preserve rows in this? If I don't mention, by default its recital on the validation of deleted rows.
  
  Please help me on this problem.

  create global temporary table t1 on commit preserve rows
    2  as select * from dual;
  
  Table created.
  
  TUBBY_TUBBZ?
  

• Possible to insert more than once in the same table using multi table insert?

  I used multi-table insert before insert a source separate from the tables without problem.
  
  However, when I want to insert into the same table two or more distinct lines, I encountered a problem because when I call nextval on the sequence since this is the same sequence # will try to use the same number for two inserts, which will raise a violation of PK constraint on the 2nd insert.
  
  A way around this problem?

  Another option is to create the sequence with increases of 2 or however many tables, you are targeting.
  When you then specify the. NEXTVAL, you must subtract the relative number of it, apart from the first table that you insert in to.

  Something like that;

  drop table t1;
  
  create table t1 (a number, b number);
  
  drop table t2;
  
  create table t2 (a number, b number);
  
  drop sequence test_seq
  /
  
  create sequence test_seq increment by 2 minvalue 0
  /
  
  insert all
  when 1 = 1 then
    into t1 (a, b) values (test_seq.nextval, 1)
  when 1 = 1 then
    into t2 (a, b) values (test_seq.nextval  - 1, 1)
  select 1, 1 from dual
  /
  

• Creating a table using the Select statement of the physical layer

  Hello
  
  I use 10G, and I have the sub query in my physical layer. I chose the type of Table as Select and gave the SQL below. When I say the number of lines of update updates lines 93, that is correct, but does not show me the columns, or when I say display data, it does not show me the data, please see if I'm doing something worng. Thanks for your time and your help.
  
  Select (select program_id, project, actvty_id, commitment_date, row_number() over (partition by order project by commitment_date desc) as rnk project, actvty_id, program_id, commitment_date)
  of project_detail) a
  where rnk = 1

  Yes, create columns individually and click view data, you'll be able to get data

• Update a table using the clause

  Hello

  I want to update a table using the selected values.

  Cases in the sample:

  
  

  create table as empsalary)

  Select 1 as empid, 0 in the wages of all the double union

  Select option 2, the double 0);

  Data update are as follows

  with saldata as

  (

  Select 1 as empid, 5000 as wages, 500 as double pf

  Union of all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  I tried the following query but does not work

  updated set of empsalary table (empid, salary) =

  (

  Select * from)

  with saldata as

  (

  Select 1 as empid, salary, 500 5000 as pf Union double all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  ) sl

  where sl.empid = empsalary.empid

  )

  I use oracle 10g.

  Help, please.

  Krishna Devi wrote:

  Hello

  I want to update a table using the selected values.

  Cases in the sample:

  create table as empsalary)

  Select 1 as empid, 0 in the wages of all the double union

  Select option 2, the double 0);

  Data update are as follows

  with saldata as

  (

  Select 1 as empid, 5000 as wages, 500 as double pf

  Union of all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  I tried the following query but does not work

  updated set of empsalary table (empid, salary) =

  (

  Select * from)

  with saldata as

  (

  Select 1 as empid, salary, 500 5000 as pf Union double all the

  Select option 2, 10000,1000 like double pf

  )

  Select empid, salary saldata

  ) sl

  where sl.empid = empsalary.empid

  )

  I use oracle 10g.

  Help, please.

  Thanks for posting creates table and test data.

  The error message would have helped because it's pretty obvious that this is the problem:

  Update table empsalary

  *

  ERROR on line 1:

  ORA-00903: invalid table name

  Just remove the word "table".

• Table multi-selection disabled the check boxes in ADF 10 g

  I think I met an obstacle when you work with a multi-selection table in 10 ADF.

  The selection itself works very well. However, my problem is to try to disable some of these boxes several selections. These boxes are disabled using the expression language. Once disabled, I can always choose these rows in the table using the button 'Select all' created by multiple selection facet. On the page sent, the disabled lines are not recognized as being selected, which is good. However, they always seem to be selected on the front-end server, which would be confusing for users.

  <af:table emptyText="No roles were found"
            binding="#{backing_userRoles.tableRoles}"
            id="tableRoles"
            value="#{backing_userRoles.userRoleList}"
            var="userRole">
                          <f:facet name="actions">
                            <af:commandButton text="Copy Roles"
                                              binding="#{backing_userRoles.cmdCopy}"
                                              id="cmdCopy"
                                              action="#{backing_userRoles.cmdCopy_action}"/>
                          </f:facet>
                          <f:facet name="selection">
                            <af:tableSelectMany text="Select items and ..."
                                                binding="#{backing_userRoles.tableSelectMany1}"
                                                id="tableSelectMany1"
                                                rendered="#{backing_userRoles.managerFlag}"
                                                disabled="#{userRole.role.autoGrantedFlag eq 'Y'}"/>
                          </f:facet>
  

  

  So as you can see, the disabled check box has been selected even when disabled. Any ideas on how to change this behavior? Or maybe just get rid of the default generated 'select all ' | 'Select none' orders?

  Thank you

  Cody

  Or, remove selection facet and make sure you have a selection logic - that is to say, some transient Boolean attribute of VO enabled/disabled state, and you have Select All/Select none

• "missing the SELECT keyword" error during an insert into the temporary table using the blob value

  I'm trying to insert into an oracle temp table using select that retrieves data from a blob field but I get the error: "lack the SELECT keyword.

  How we store temporary in oracle result when we make this type of operation (extraction of data in fields and try to load them into a separate table on the fly.?)

  with cte as)

  Select user_id, utl_raw.cast_to_varchar2 (dbms_lob.substr (PREFERENCES)) as USER my_blob

  )

  create table new_table as

  SELECT user_id,EXTRACTvalue(xmltype(e.my_blob),'/preferences/locale') regional settings

  E ETC

  ----------------------------------------------------------------------------------

  BLOB data - value - which is

  <? XML version = "1.0" encoding = "ISO-8859-1" ?>

  - < Preferences >

  < time zone > America/New_York < / > zone

  < displayscheduleinusertimezone > Y < / displayscheduleinusertimezone >

  < local > Spanish < /locale >

  < DateFormat > JJ/mm/aaaa < / DateFormat >

  < timeFormat > hh: mm aaa < / timeFormat >

  < longformat > Long_01 < / longformat >

  < doubleformat > Double_01 < / doubleformat >

  < percentformat > Percentage_01 < / percentformat >

  < currencyformat > Currency_01 < / currencyformat >

  < / Preferences >

  A WITH clause that must immediately precede the SELECT keyword:

  SQL > create table t:

  2 with the o as (select double dummy)

  3 select * West longitude;

  Table created.

• Select this OPTION to generate XML data from the table using XMLELEMENT, XMLAGG gives error ORA-19011 string buffer too small

  My select statement fails with the error:

  
  

  The ORA-19011 string buffer too small

  
  

  The select statement looks like:

  
  

  SELECT TO_CLOB)

  XMLELEMENT ("accounts",

  XMLELEMENT ("count",

  XMLATTRIBUTES)

  rownum AS "recordId."

  To_date('20130520','YYYYMMDD') AS "datestarted."

  123456 AS "previousBatchId."

  56789 AS 'previousRecordId '.

  ),

  ....

  .... .

  .....

  XMLFOREST)

  SIG_ROLE AS "SignatoryRole."

  To_char(TRANSFER_DATE,'YYYY-mm-DD') AS "TransferDate."

  NVL(Reason,0) AS 'reason '.

  ) AS the 'transfer '.

  )

  ()) AS CRDTRPT

  OF ANY_TABLE;

  • It looks like I can choose only 4000 characters using the SELECT statement (please, correct me if I'm wrong)

  I'd use the XMLGEN package. But the environment team says no mounted drives in the future with the arrival of the EXADATA.

  NO HARD DRIVE MOUNTED, NO ACCESS TO THE DATABASE DIRECTORIES

  No UTL_FILE

  I need to use the REEL spool the resulting XML data of the SELECT query.

  SQL is a standard in my org, but I can do with a PL/SQL solution also to load data into a table (cannot use a COIL with PL/SQL)

  What I do is:

  1. a column of type CLOB to a xml_report of the loading of the above SELECT query table
  2. Then using SELECT * FROM xml_report to SPOOL the data to a file report.xml

  No need of XMLTYPE data behind. Xml data stream is fine for me.

  In addition, I need to validate the XML file, also using XSD.

  Problem is that the resulting lines of the select query are supposed to be from 15000 to 20000 bytes long.

  Oracle database version: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  A Suggestion or a solution to this problem would be appreciated.

  (Sorry for the use of "BOLD", just to make it more readable and highlight the imp points)

  Bravo!

  Rahul

  It looks like I can choose only 4000 characters using the SELECT statement (please, correct me if I'm wrong)

  You use the right method.

  There is an implicit conversion from XMLType to the data type VARCHAR2 as expected by the function TO_CLOB, where the limitation, and the error.

  To serialize XMLType to CLOB, use the XMLSerialize function:

  SELECT XMLSerialize (DOCUMENT

  XMLELEMENT ("accounts",

  ...

  )

  )

  OF ANY_TABLE;

  For the rest of the requirement, I wish you good luck trying to spool the XML correctly.

  You may need to play around with the SET LONG and SET LONGCHUNKSIZE commands to operate.

• Trying to create the table using Clause any Union with Select multiple stmts

  The motion seeks to get the substring of the value to for example.
  If the value is * ASA 2 * then so do ASA
  where as if the value is * 1.5 TST * it sholud come as TST as wise for others too.
  I am trying to execute stmt SQL written but in error as below:
  
  * ' ORA-00998 must appoint this expression with the alias column 00998.00000 - must appoint this expression with the column alias. "
  
  CREATE TABLE TEST_CARE AS
  (
  SELECT row_id, old_care_lvl, SUBSTR(old_care_lvl,3), len test_care_lvl FROM
  WHERE LENGTH (old_care_lvl) = 5
  UNION ALL
  SELECT row_id, old_care_lvl, SUBSTR(old_care_lvl,3), len test_care_lvl FROM
  WHERE LENGTH (old_care_lvl) = 7
  UNION ALL
  SELECT row_id, old_care_lvl, SUBSTR(old_care_lvl,3), len test_care_lvl FROM
  WHERE LENGTH (old_care_lvl) = 14
  UNION ALL
  Row_id SELECT, old_care_lvl, SUBSTR (old_care_lvl, 3), LEN test_care_lvl
  WHERE LENGTH = 7 AND old_care_lvl (old_care_lvl) = "Regular."
  );
  
  I want to create the table using the above given the multiple selection by using the Union ALL clause, but trying to create run query error like "ORA-00998 must appoint this expression with the alias column 00998.00000 - must appoint this expression with the column alias.
  
  Please guide me how to approach to solve this problem.
  Thanks in advance.

  Try this->

  CREATE TABLE TEST_CARE
  AS
    select *
    from (
            SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
            WHERE LENGTH(old_care_lvl) =5
            UNION ALL
            SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
            WHERE LENGTH(old_care_lvl) =7
            UNION ALL
            SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3), len FROM test_care_lvl
            WHERE LENGTH(old_care_lvl) =14
            UNION ALL
            SELECT row_id, old_care_lvl,SUBSTR(old_care_lvl,3),LEN FROM test_care_lvl
            WHERE LENGTH(old_care_lvl) =7 AND old_care_lvl ='Regular'
        );
  

  N.B.: Not tested...

  Kind regards.

  LOULOU.

• Need Code for multi selection area of table

  Hi all
  
  I have a requirement to select several lines in a region of the table. After selecting several lines, I submit. Once it is submitted, I have to get these special lines selected values to pass as a parameter in my procedure.
  
  Thanks in advance.
  
  Thank you and best regards,
  Myvizhi
  

• How to compare 2 lists of box-multi-select/shuttle APEX (e.g.1:2:3 and 3:1:2) for equality?

  I want to validate 2 selections of list of shuttle for equality. for example

  1:2:5:7:18:3

  and

  1:5:7:2:3:18

  should be treated as equals and therefore valid (i.e. same selections but in different order)

  While

  1:2:5:7:18:3

  and

  1:2:18:9 are not equal and would fail validation.

  If I use the function string_to_table() on the two lists, then I need sort the associative arrays and then compare them for equality.  Any suggestions on the best way to do it?

  Thanks in advance

  PaulP

  Thanks for all help you, but I decided to stay with string_to_table APEX tables and keep things simple.  I decided to return Varchar2 ('TRUE', 'FALSE') instead of boolean (TRUE, FALSE) so I could use the function in a SQL WHERE clause.

  Here's my working solution

  create or replace FUNCTION CheckMultiSelectStringsEqual(
        p_string1    IN VARCHAR2 ,
        p_string2    IN VARCHAR2 ,
        p_separator IN VARCHAR2)
      RETURN varchar2
  ------------------------------------------------------------------------------------------------------------------
  -- This function accepts 2 multi-select/shuttle box strings in the format '1:2:3:5:12:4'
  -- and a string separator i.e.':' and irrespective of the order of individual selections within
  -- the string, returns 'TRUE' if the strings are equal else returns 'FALSE'.
  -----------------------------------------------------------------------------------------------------------------
    IS
      l_table1 apex_application_global.vc_arr2;
      l_table2 apex_application_global.vc_arr2;
      v_return varchar2(8);
    BEGIN
      if p_string1 is null or p_string2 is null or p_separator is null then
        raise_application_error(-20001,'USAGE: CheckMultiSelectStrings() function requires 2 not null strings and a separator character' );
      end if;
      l_table1 := apex_util.string_to_table(p_string1, p_separator);
      l_table2 := apex_util.string_to_table(p_string2, p_separator);
      if l_table1.count() <> l_table2.count() then
          return 'FALSE';
      end if;
      <>
      FOR i IN 1..l_table1.count() LOOP
          FOR j IN 1..l_table2.count() LOOP
             if l_table1(i)=l_table2(j) then
               v_return:='TRUE';
               continue OUTER_LOOP;
             else
               v_return:= 'FALSE';
               continue;
             end if;
          END LOOP; -- FOR j IN 1..l_table2...
          EXIT OUTER_LOOP WHEN v_return = 'FALSE';
      END LOOP; --FOR i IN 1..l_table1.
      RETURN v_return;
    END;
  

  -= == HERE IS THE TEST FOR THE FUNCTION CODE =.

  set serveroutput on
  declare
  v_return varchar2(8);
  begin
  v_return:= CheckMultiSelectStringsEqual('1:2:3:4','2:1:3:4',':');
        if v_return='TRUE' then
            dbms_output.put_line('Strings are equal');
        else
            dbms_output.put_line('Strings are NOT equal');
        end if;
  end;
  

  Hope this helps someone...

  PaulP

• 10.1.3.4.2 - Multi Select guest - research shows too many results

  Hello

  Someone sees a situation...

  When you use a multiple selection of dash prompt, the prompt has the following clause to return only the code with the status of N = select ID from table where status in (' ' n ') and it works fine

  but in the guest even if we use the code names of search for example Contains "XXX", it will return all codes regardless of status, though even she must return only status = N codes,.

  any ideas...

  Thank you

  Hello

  I assume you are using the available inside the Multi selection prompt search filter?

  If this is the case, then this is how OBIEE multi select work. When you apply the search condition in mutiselect, it generates a new query with the condition provided in exculdes and the search filter no matter what external sql filter.

  If you want to keep the filter at the prompt, use condition you be the guest (fx). It will be useful.

  See you soon

  HN

• The analysis through the Multi selection of values in a PL/SQL procedure

  Greetings,
  
  This should be an easy one for either of you, experts of PL/SQL. I'm not, so I'm not sure how to code this upward.
  
  I have a Multi selection page element and am passing the value of it to a routine of PL/SQL as a parameter. I am able to use the value if I spend only a value of my procedure, so I work. But not with multiple values, I need the code in the procedure to loop through the values. How do I code that a period? The procedure is relatively short and is included below. p_cell is multivalued parameter.
  
  Oh Yes... Probably, you need to know this. The values are coming like this - 1-3:2-3:3 - 3:5:6
  
  In addition, values are the coordinates XY of a grid I have a picture on the page. The routine removes certain cells (1-3, etc.) of the grid. The grid is created using HTML, so I have to remove lines of HTML to remove a cell in the grid. Just in case this is useful.
  
  THX, Tony
  
  = = = = = = =
  
  create or replace
  procedure qcis_remove_grid_cell (p_id in NUMBERS, p_cell IN VARCHAR2) as
  number of V_POSITION;
  number of v_position_from_end;
  number of v_line_start;
  number of v_line_end;
  number of V_LENGTH;
  CLOB v_html;
  
  BEGIN
  
  BEGIN
  Select imagemap_html in the v_html of qcis_im_template_draft
  where header_id = p_id;
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  v_html: = NULL;
  END;
  
  V_LENGTH: = length (v_html);
  V_POSITION: = INSTR (v_html, "alt =" "|") p_cell |' « ') ;
  v_position_from_end: = (v_length - v_position) *-1;
  v_line_start: = INSTR (v_html,' < area shape ', v_position_from_end)-1;
  v_line_end: = INSTR (v_html,'/ > ', v_position) + 2;
  v_html: = substr(v_html,1,v_line_start) | substr (v_html, v_line_end);
  
  UPDATE qcis_im_template_draft SET imagemap_html is WHERE header_id p_id = v_html;.
  
  END qcis_remove_grid_cell;
  
  Published by: hidden November 1, 2011 08:01

  Not sure, I understand your need, but it sounded like you must decrypt a string in a set of rows. If so, I will give you 2 ideas:
  1 function STRING_TO_TABLE: http://www.sloug.org/i/doc/api073.htm
  2. other resources (regular expression or XML): http://apex-at-work.blogspot.com/2011/05/two-ways-using-string-to-table-in-apex.html

• Select multiple items using a selection list?

  Hi all
  
  In my application, I have a HTML area with two elements of the selection list. According to the first value of the selection list, the second selection list will fill up.
  
  Now I want to show a report based on the second select value list, but I want to select several values in the second selection list. For this, I just activated the multiple selection option in the selection list item.
  
  But when I tried to implement this, the error occurs.
  
  Select multiple items using a selection list? If this is the case, how can I assign these values in the selection list element onchange attribute.
  
  Thank you
  David...

  A further possible solution to that above with the function of pipeline is to simply use Instr.

  Note: This option should be used if the amount of data is small or already filtered by other predicates.

  SELECT display_value, return_value
    from xxx
   where INSTR(':'||:P1_MASTER_MULTI_SELECTLIST||':', ':'||parent_value||':') > 0
   order by display_value
  

  BTW, if you use the new attribute "Cascading LOV Parent éléments" in the LOV section and set it to your parent element (in my example P1_MASTER_MULTI_SELECTLIST), the agenda of the child page is automatically updated if the master multi selection list is changed.

  Concerning
  Patrick