Find the value of the item required using getVariableData

Similar Questions

• How to find the security protocol used by a site in firefox to version 24.6.0

  I'm unable to find the security protocol used by the site, either SSL or TLS 1.0 or 1.2.

  I see my answer above is marked as useless, so I guess it doesn't help for Firefox 24.

  You should be able to see which version of the TLS Protocol and encryption to agree to the current use of press.
  You can use the above posted extension or check in the Security tab of the Web Console (Firefox/tools > Web Developer).
  24 Firefox supports only TLS 1.0 (security.tls.version.max = 1), so that only leaves you with Protocol to guess.

  • http://KB.mozillazine.org/security.TLS.version. *
  • 0 means SSL 3.0, TLS 1.0 means 1, 2 means TLS 1.1, 3 means TLS 1.2 etc..

  In Firefox 24 you have the Security tab in "tools > Page Info > Security" to see what level of encryption is used, and you do not see what costume of encryption is used.
  To find you would have to disable any combination of encryption algorithm by setting the Pref security.ssls false and allow both until you get a secure connection.

• Try to find the terms of use of documents and Web pages

  Hi am writing my

  my university thesis. I'll try to find the terms of use on the use of VMware

  diagrams, documentation and Web page in thesis.  Heart of my thesis is

  the best possible instructions how to install and use Labmanager in

  University teaching. No idea how I read, call, or mail?

  I think that you can reuse for educational purposes.  Just follow the correct citation format (APA, MLA, etc.) for the way in which the thesis is written.

  And I see no reason why you can't, as much as it is for the promotion and support of our product.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• How to find the ADF version used in a deployment archive?

  Hello
  
  When I get an ear/war file from a developer I want to deploy on a Weblogic Server it would be nice to be able to verify that the ADF version developers used is the same that is installed on the server.
  
  I tried to look at different deployment files but I can't find anything about it. Can anyone help?
  
  I can see the JSF version but noting on ADF.
  
  What about Peter

  I see your problem but do not see how you can get the information of just the EAR file as long as it is not put there by purpose. The required information is part of the jars that are installed on the servers. They are not part of the ear, but are only referenced.

  For the server side, I've written a web service that I install on each server (managed server that runs to the ADF, run time). This service at least tell me the version installed on the server. You can find the service including the source to my blog http://tompeez.wordpress.com/2012/02/05/adf-how-to-find-out-which-adf-version-is-installed-on-a-manged-weblogic-server/.

  There was a discussion on this forum and the ADFEMG google Group discuss how to know what the newer version (from sources of a project) was used to develop the App. Unfortunately, today you can't get a definitive answer to this. There is an ER out for it to allow in the future (http://java.net/jira/browse/ADFEMG-70).

  Timo

• ERR-1002 cannot find the item for the item ID

  I have a button on page 111 of my application that, when you press on, redirects to P120 and sets 2 elements in this page the value in a number of permit numbers on P111. But when I click on the button, I get the error message:
  
  ERR-1002 error unable to find the point item ID 'P120_PERMIT_NUMBER_FOR_RANGE' in the application...
  
  I am sure that the name of the element in the 120 page is "P120_PERMIT_NUMBER_FOR_RANGE".
  
  So what's the problem? Thank you.

  is it because you have a space after the comma before the name of the element?

  Gus...

• bougth a second hand iPhone 6 how find the previous owner using the serial number?

  I bought a second hand iPhone 6 and he holds a lock to iCloud how to find the previous of this iPhone owner so that I can email him?

  I don't have a serial number of the phone how to use it so that I can follow the former owner?

  Unfortunately, you can not. Take it to where you bought it for a refund.

  See you soon

  Pete

• Couldnot load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the file specified using SharePoint Designer 2007

  I have a computer on my network when you open web files WSS 3 in SharePoint Designer 2007, I get the error 'could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the specified file. "I have looked through some forms on the web and have concluded that this is a problem of .NET Framework 2, but I have not managed to solve the problem. He also seems to be keep me to load the Update Services administration console on a workstation by using MMC. Other posts on my network can open/edit SharePoint web site files in SharePoint Designer 2007 without this error and open the Administrative Update Services console withpout errors. I tried a repair on .NET 2. Anyone have any suggestions on another approach to fixing .NET?

  Thanks for your suggestions.

  Jeff

  Hello

  -What is the operating system installed on your computer?

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/threads

• Where to find the IaaS __Clone_SnapshotId used on plans related clone in the vRA?

  Hi guys,.

  When you create linked clone plans IaaS that iaas will create an entity of VirtualMachineTemplateProperties with the __Clone_SnapshotId PropertyName and PropertyValue of let's say 6.

  This id is used to identify what snapshot to use for the linked clone one can be found in the database of IaaS. However: I can't say this number (6) where in vSphere.

  If the id of the snapshot in vCenter looking then it is, for example, snapshot-7380. Is there a kind of happening of mapping in vRA IaaS between vSphere snapshot ID and the ID snapshot of IaaS? How to get the instant correct ID for IaaS?

  Good so I finally tracked. It looks vRA IAAS using the id of snapshotTree for the clone-related references. If you have access to the VC:VirtualMachineSnapshot you can find the id like this:

  //snap is the provided VC:VirtualMachineSnapshot you want to use as linked clone reference
  var vm = snap.vm;
  var id = snap.id;
  function findSnap(snapTrees, snapId)
  {
    System.log("Searching SnapshotTree for id '" + snapId + "'...");
    for each(snapTree in snapTrees)
    {
    System.log("Checking snapTree '" + snapTree.id + "' with id '" + snapTree.snapshot.id + "'...");
    if(snapTree.snapshot.id == snapId)
    {
    System.log("Found matching snapshot! SnapTree id is: '" + snapTree.id + "'.")
    return snapTree.id;
    }
    else
    {
    var childSnaps = snapTree.childSnapshotList;
    if(childSnaps.length > 0)
    {
    System.log("Checking children...");
    return findSnap(childSnaps, snapId);
    }
    }
    }
    return null;
  }
  
  // Get the id like this
  var snapTreeId = findSnap(vm.snapshot.rootSnapshotList, id);
  

  Hope someone saves some time.

• To find the file size using swf header... Please

  Hi all

  I was wondering if anyone could tell me how to find the size of the file in the swf header. I'm looking at the pdf to swf file format spec v10 and it indicates that this field " ""the FileLength is the total length of the SWF file, including the header. If it is a

  file uncompressed SWF (signature of the SAA), FileLength field must match exactly the file

  size. In the case of a file compressed SWF (signature of the CFS), FileLength field indicates the total

  After the decompression queue length and so usually does not match the size of the file. Having

  the available uncompressed size can make the most effective decompression process. »

  Only problem is that I can't find it.

  If I had to watch the hexadecimal value of a SWF that would I look to find the size of the file?

  Here is the file:

  465753095f030000780007d00000177000001201004411000000004302ffffff3f0335030000886a0125005052 4553454e54535452494e470041314c310050524553454e5450415448002e2e2f416e6e657820412f004c455353 4f4e535452494e470052534c30313032004c4553534f4e50415448002e2e2f6c6573736f6e732f007373436f72 6500696e69740050524553454e54464f4c444552002f006c617374496e6465784f6600696e6465784f66007375 62737472696e67006c6573736f6e4c697374656e6572004f626a656374006f6e4c6f6164496e69740070617373 6564496e3100706173736564496e32006d61696e006c6573736f6e4c6f61646572004d6f766965436c69704c6f 61646572006164644c697374656e6572006765744e657874486967686573744465707468006c6573736f6e0074 68697300637265617465456d7074794d6f766965436c69700073796e630070617468007373476c6f62616c7300 73734261736550617468005c00417070007365744261736550617468002e737766006c6f6164436c6970009604 00080008013c960400080208033c960400080408053c960400080608073c960b0006000000000000000008081c 96020008095217960b00080a080b070100000008021c960200080c52960900080b070100000008021c96020008 0d52960500070100000047960700070200000008021c960200080e523c960d00080f0600000000000000000810 403c960200080f1c96020008118e0c00000100022a00016d63005f009606000401080208021c4f960600040108 0a080a1c4f9606000401080008001c4f9606000401080608061c4f9606000401080408041c4f96060004010812 08121c4f9606000401081308131c4f960d000600000000000000000401081452174f960d000815060000000000 0000000816403c960200080f1c960700070100000008151c96020008175217960b000600000000000000000818 3d96090008190702000000081a1c960200081b5217960900081c0501070100000043960400081d081e1c960200 081f4e960200082047960200080a1c47960500070100000043960700070200000008081c96020008214e960200 0822521796020008191c96020008061c96020008041c47960200082347960700070200000008151c9602000824 5217070040000000

  The file size field value is 5f030000, but the byte order is little endian and must be reversed. Reverse bytes are 00 00 03 5f (0x35f) (863).

  This is a utility function to reverse an unsigned int:

  function invertUint(value:uint):uint
  {
  var: result: uint = 0;

  try {}
  var ba: ByteArray = new ByteArray();
  ba.writeUnsignedInt (value);
  BA.position = 0;
  BA.endian = Endian.LITTLE_ENDIAN;
  result = ba.readUnsignedInt ();

  }

  {catch (Err)}
  return the result;

  }

• Where can I find the syntax that uses the flashes?

  I'm looking for examples on the typing of the criteria because if / then of statements, loops, etc. Such things as the way of typing "or" (|) and the way of saying ' not equal to ', etc..
  
  I do not really help files in CS4... it is almost impossible to find something in them :-(
  
  Thank you.
  
  Dave

  If search you "operators" in the help documentation and select the entry for this name, you will find a table with all the items you're looking for.

  I don't have CS4 and have heard the horror stories about what they did with the help files for which is utilitarian, but I hope that they contain the same information that CS3 provides.

• How can I find the serial number used to install photoshop elements

  I'm moving to a new computer and can't find the serial number for Photoshop Elements.  I have full access to the old machine and downloaded from Adobe for the new machine.

  Hi securemail

  Check this box: quickly find your serial number

  concerning

• Find the item XML [< email >]

  Hi all

  I am new to Scripting InDesign.

  I want to know how to find the XML [< email >] n element number of nested structure?

  Give me an idea.

  Thank you, RAYMOND

  Hi, REDA.

  See my update below code:

  myDocument var = app.activeDocument;
  FindEmail (myDocument);

  Alert ("completed");

  function FindEmail (elm)
  {
  for (var i = 0; i)< elm.xmlelements.length;="">
  {
  XMLelementName = elm.xmlElements [i].markupTag.name.toString ();
             
  if(XMLelementName=="email")
  {
              elm.xmlElements [i] .markupTag = "e-mail";
  }
  FindEmail (elm.xmlElements [i]);
  }
  }

  Kind regards

  River. P

• Find the objects that use a procedure

  I have a procedure within a package. I want to know what are the DB objects use.

  select name  from user_source where upper(text) like upper('%procedurename%');
  

  Try this...

• Make the field required using the Validation

  Hello
  
  I use R17 and want to make a field required by the adding validation [< field >] IS NOT NULL
  
  Strangely, this does not work on a new Record. a NULL value is always accepted. It only works for a modified record.
  
  has anyone in front of it too? or is this a BUG in my environment.
  
  Any ideas?
  
  Just to check if it works, I tried a [< field >] validation IS NULL and it worked correctly on New and updated records.
  
  Thank you
  Royston

  Hello

  There is a solution to achieve this. PL download the configuration steps of the below mentioned link.

  http://DL.dropbox.com/u/3971519/make%20A%20Field%20Required%20Using%20Advanced%20Field%20Management.doc

  Let me know if you have any questions.

  Rgds,
  Amit samir

• ERR-1002 cannot find the item for the item ID "SESSION".

  Hi all
  
  We recently ugpraded Aoex 3.1 to 3.2 and have noticed now times that I get the following error when connecting...
  
  

  Unexpected error, unable to find item name at application or page level.
  
  
  ERR-1002 Unable to find item ID for item "SESSION" in application "2500".
  
  Return to application.

  I have made changes to the application, but have not changed anything to with the MEETING point, I thought that was built in APEX so am not sure why it does not.
  
  The error occurs especially if I empty the internet cache and try to connect again on a new session, I click back to the Application and try to connect again, but the error. If I connect under a different name, it connects.
  
  This happened to someone else?
  
  Thank you
  
  Graham

  Ah-Ah!

  INSERT INTO M_USERS_HISTORY (m_users_history_note, created_by, m_user_num, date_created)
  VALUES (V_User_Id, 'User' | upper(:P101_USERNAME) |) ' connected to the session: ' |
  : SESSION | ' - IP address: '. owa_util.get_cgi_env ('REMOTE_ADDR'),
  (: P101_USERNAME, sysdate);

  Change: SESSION v ('APP_SESSION') there too.

  Scott