First head of Collaboration - jitter/Packetloss/time of latency on CTS-1300

Similar Questions

• Performing the migration of the first deployment of Collaboration CUCM and IM + P again

  Hello

  We used the server first deployment of Collaboration to create virtual machines, run the upgrades and migration of 9,02 10.5 CM and IM + P.

  The migration was properly executed and CM and IM + P came as a cluster.  We could save phones and test.

  These servers are not in production.

  Can run us the migration task to these servers to update their information?

  No, you will need to remove these servers and run the migration all again.

• What should be my time to latency resulting?

  Please can someone tell me about what my time of latency that results should be in the Prox 10.2.4 logic?

  I use an interface Apollo Twin Duo Thunderbolt, with a Macbook Pro 15' 2015 of the retina, Quad Core 2.8 ghz, 16gbRam, El Capitan 10.11.3

  In preferences, it indicates the size of buffer 64

  Result 10.2ms (exit 2.1ms) roundtrip latency

  Is this normal?   If this latency is high, how can it be reduced?  I bought the most expensive interface that I could afford!

  It's causing you problems?  Placement of record does not affect latency.

  You can hear with the help of a live microphone or guitar/bass input.

  The round-trip latency is high given the size of buffer, which means that somewhere in the chain either Apple or AU-Apollo has added additional buffers.

  My material RME under Snow Leopard under Logic-9 shows:

  Buffer size 128 round trip latency 7.3ms out 3.7

  "" 64 4.4ms roundtrip latency output 2.2

  ««32 2.9ms roundtrip latency output 1.5»

  Normally the return buffer size is double (or slightly more) that the latency of the output, so in your case, it would be between 4.2 and 4.4ms. The pilot of Apollo or logic or the last OSX added buffers. I wouldn't be surprised if it's not Apple Core Audio, which uses the extra buffering... recent Mac operating systems are too heavy top and ineffective even if it's not that noticeable that the whole system is the additional use buffering, which is why so much RAM and open disk space is necessary. There is also the possibility that the extra buffers are part of the Thunderbolt interface?

• Strange behavior of "RT Get CPU Loads.vi"; first call lasts a very long time!

  I spent a considerable time of debugging a new application, after that we decided to migrate to the new architecture. When a more common coding errors where eliminated, the application started running smoothly for short periods before suddenly freezing until the moment where the connection to the target RT has been lost.

  I finally understood as a Subvi, which returns the data to the system (use of memory, the cpu load, etc.) lasted if long run than the queue to feed this consumer loop filled with tasks causing eventually the memory fills. I have done some testing of the Subvi separately and noticed that "CPU Get RT Loads.vi" takes forever to run the first time, it is called after a target restart and then quickly runs during subsequent calls.

  Is this known behaviour? Other ways to solve this, except 'RT Get CPU Loads.vi' call during initialization?

  The VI has an entry "session in? If she uses the system of screw configuration, he may have to create a session on the first call you can do outside of your loop. If not and you have installed system configuration tool, you can try to use the nodes property to get the CPU - in more recent versions of RT, I think that the function you are using is obsolete.

  Can you post a snippet of your code / the VI?

• first day of the month and time

  Hello

  Using oracle 11.2.0.3

  A table with a column date

  sample opening time data 04/08/2014-08:30 one single column, another column start date 04/02/2014

  Want to have a sql that will go through an opening time table set on the first day of the month as well as existing time

  for example expect times to be

  04/01/2014 08:30

  Code below will give the first day of the month

  What is the best way to achieve this-date data type columns.

  {code}

  Select trunc(start_time,'MM))

  of customer_hours ch

  {code}

  Select

  SYSDATE - trunc (sysdate) + trunc (sysdate, 'MM')

  of the double

  resp.

  Select

  start_time - trunc (start_time) + trunc (start_time, 'MM')

  of the double

• First external USB disk backup from Time Machine and Time Capsule

  I have a new USB drive from 4 TB to use for backups Time Machine plugged on my almost full Time Capsule.  The Capsule is connected to my network using Ethernet, so it can be used to back up my MacBook Pro and iMac (via ethernet) (wireless).

  I would like to initial backups by directly plugging the USB directly on my iMac and my MacBook Pro.  I currently have the USB plugged into the Capsule of time connected to the ethernet. The initial backup for my iMac took 2 hours to make the 35GBs of 1.6TBs to back up so far.  So potentially 2 + days of initial backup...?

  There must be a quicker way.

  Box: to recover from my iMac support precedent (after a crash), which stood on a 3 TB USB2 drive plugged to the Capsule, it was estimated to take 36 hours.  I fly over the drive and plugged into the USB port on my iMac and the recovery only took about 8-10 hours, so it does not work for recovery.

  I tried to make the backup of the iMac by plugging the USB drive of 4 TB directly on the iMac. I then moved the dUSB Time Capsule drive, but he seemed to start when plugged into the TimeCapsule. If possible, I must have done something wrong in the order.

  It is extremely difficult to backup directly to the USB port and then move it to the TC because TM backup differently at local and network drives.

  People have figured out ways around it... but you think that it cannot simply... After saving 1.6 TB of data.

  Here see Q18.

  http://pondini.org/TM/FAQ.html

  The fact is... It is not a reliable method.

  The initial backup for my iMac took 2 hours to make the 35GBs of

  It's a little slow... is the gigabit connection and the wireless is turned off?

  What model is the TC?

  Your sidebar... is absolutely true... you can easily go elsewhere... because you can mount the sparsebundle to the computer.

  Box: to recover from my iMac support previous (after a crash), which stood on a 3 TB USB2 player connected to the time Capsule, it has been estimated to take 36

  hours.  I fly over the drive and plugged into the USB port on my iMac and the recovery only took about 8-10 hours, so it does not work for recovery.

• First Elements 10 - moving to the time line images

  Have version 10 and no manual is still available, so a simple question im sure.

  I say 100 photos that I want to spend in my film, make a slideshow of sorts.

  Y at - it a way for all move and set the time (or the number of images) as each image is displayed.

  So select all 100 images and move to the line in time and set the time to display every second one to 1 as an example.

  Is there a way to select multiple images on the time line and put them all to show for a while.

  I know that a silgle element can be selected on the time line and dragged manually to make a moment specifice,

  but this time can be entered by entering a value/time?  I would like to change the time on all 100 at the same time.

  My goal is to make a quick movement of pictures slideshow, be able to set the time on the screen for each group

  the same value, all of a sudden, do not have to select each on the time line and adjust it manually on a frame-by-frame.

  Dave

  Steve,

  Thanks for your response! :-)

  I never would have looked for the solution.

  I have a follow-up question if you can, why the limit on the size of the photo file?

  Don't have Photoshop Elements for the batch, but I think I can do the same thing with Lightroom 3...

  Dave

• First Pro CS5 taking too much time to comply

  Why Premiere Pro takes too long (over an hour) to "conform" my mp4 files after I import them?

  I swear that he never used for it took long, even if I don't usually upload mp4 files.

  My computer isn't that hot crash (Quad Core Q6600 2.4 GHz) but he never really used to take THAT long.

  This is essentially a function of the speed of the drive.

• 15-20 time of latency to see the changes in analog inputs

  I inherited a program extremely complex.  I find that I see 15-20 seconds latency on the changes to the analog inputs.  I can't post the code - (it has more than 200 sub screw) but I have captured the relevant section in the long latency period of the changes.jpg of analog input attached.

  I tried to change the sampling rate and see the same problem from 1 Hz to 25 Hz (limit of reliable sampling with this PC).  I'm looking at indicators which are directly related to the acquisition of data Read.vi as evidenced by the big red arrow.

  I modeled the nested struct in the template attached without latency problems.jpg.  There is no perceptible latency but it duplicates the nested structures.

  The only thing not shown is that there are several cases of Read.vi of data acquisition using the same physical changes but not of them are in the loops that need to run at the same time.

  The data are consistent with the entries, just delayed.

  The Signal processing device is a USB-6343.  I am running these screws on LabVIEW 2011 edition.

  Any ideas?

  Yes, instead of getting just 1 sample buffer, try to get all the samples.

  Then you can retrieve the most recent example of all the samples you get and take the rest of them.

  Or you can change the configuration of taks for only once every time that you call the read function.

• Script in time of latency list vm e/s and the data store the virtual machine is on

  Hello.  We have a vsphere 5.0 environment and we live a latency of IO heavy.  I'm looking for powercli script will get the latency of i/o for each virtual machine and get the data store name, to what it is now.  We will access our storage on optical fiber.  I'm trying to get a good overview of the latency of IO in a nice view in a csv file.  I found what could be a good basis to https://communities.vmware.com/thread/304827?start=0 & tstart = 0 , but I'm not sure how to get the name of the data store in the table and I think that it is written to the nfs in any case storage.  Thanks in advance for any info\advice!

  Try the next version, it includes the average latency time read/write for the virtual machine and PAHO are / s average for the virtual machine.

  Since the CSV has a row for each data store, the values for the virtual machine are repeated.

  I also added the host name

  $vmName = "VM*"
  
  $stat = "datastore.totalReadLatency.average","datastore.totalWriteLatency.average",  "datastore.numberReadAveraged.average","datastore.numberWriteAveraged.average"$entity = Get-VM -Name $vmName$start = (Get-Date).AddHours(-1)
  
  $dsTab = @{}Get-Datastore | Where {$_.Type -eq "VMFS"} | %{  $key = $_.ExtensionData.Info.Vmfs.Uuid  if(!$dsTab.ContainsKey($key)){    $dsTab.Add($key,$_.Name)  }  else{    "Datastore $($_.Name) with UUID $key already in hash table"  }}
  
  Get-Stat -Entity $entity -Stat $stat -Start $start |Group-Object -Property {$_.Entity.Name} | %{  $vmName = $_.Values[0]  $VMReadLatency = $_.Group |    where {$_.MetricId -eq "datastore.totalReadLatency.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $VMWriteLatency = $_.Group |    where {$_.MetricId -eq "datastore.totalWriteLatency.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $VMReadIOPSAverage = $_.Group |    where {$_.MetricId -eq "datastore.numberReadAveraged.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $VMWriteIOPSAverage = $_.Group |    where {$_.MetricId -eq "datastore.numberWriteAveraged.average"} |    Measure-Object -Property Value -Average |    Select -ExpandProperty Average  $_.Group | Group-Object -Property Instance | %{    New-Object PSObject -Property @{      VM = $vmName      Host = $_.Group[0].Entity.Host.Name      Datastore = $dsTab[$($_.Values[0])]      Start = $start      DSReadLatencyAvg = [math]::Round(($_.Group |           where {$_.MetricId -eq "datastore.totalReadLatency.average"} |          Measure-Object -Property Value -Average |          Select -ExpandProperty Average),2)      DSWriteLatencyAvg = [math]::Round(($_.Group |           where {$_.MetricId -eq "datastore.totalWriteLatency.average"} |          Measure-Object -Property Value -Average |          Select -ExpandProperty Average),2)      VMReadLatencyAvg = [math]::Round($VMReadLatency,2)      VMWriteLatencyAvg = [math]::Round($VMWriteLatency,2)      VMReadIOPSAvg = [math]::Round($VMReadIOPSAverage,2)      VMWriteIOPSAvg = [math]::Round($VMWriteIOPSAverage,2)    }  }} | Export-Csv c:\report.csv -NoTypeInformation -UseCulture
  

• Time of latency and effects

  For starters, some information:

  OS: Windows 7 64-bit

  Adobe Audition CS5.5

  Preamplifier: Behringer UCG102

  Computer: AMD Athlon II x 4 630 - ATI Radeon HD 5750-4 GB DDR3

  In adobe audition, I found a setting where I can adjust the latency; I have a choice of 30 ms and Ms 500 betweek I put it at 30ms, but there is still too much latency; I want to play guitar and to record with Adobe Audition, but it's impossible cause latency is too!

  How can I do to further reduce? We cannot add this menu 10 ms, 5 ms, 30 ms?

  And if I need the audio drivers, where can I the found?

  And now my second question; I want to add on my guitar effects, when I play in Adobe Audition, as saturation, a phaser, reverb... I found some effects in the menu effects, sounds good, but I've seen a video of Adobe Audition 3.0, and it seems that in the video to have a plugin for the adobe audition, with lots of vitrual amplifiers, effects pedals, etc. - it is about 02:00: http://www.youtube.com/watch?v=ci9wFLymz_g

  Can I have a similar plugin for Adobe Audition CS5.5?

  Please answer me!

  Upstairs, he said Ms. Pull down from the box and it should tell asio as well. If not, have you installed the Behringer from the CD that came with it?

• Ink advantage 1518: first and second impression is poor third better every time

  For a month, whenever I print a simple text, the first and second copies are of poor quality.  Black ink is faded up or down the page.  Sometimes the second copy is better, but the third copy is fine.  This happens again and again. I took the cartridge HP HP678 and shaken it, but the problem persists.  I lose a lot of paper.

  Any advice?

  Thanks, Stephen

  I'm not familiar with your printer model, but looking at the photos of the cartridges on eBay that looks like they are of the type that is a cartridge with a built-in print head.
  
  So the next time you need to print instead of print spend by the movements as you would replace a cartridge which, on most printers, I work with you would just open the top cover.
  
  Remove the black print cartridge and inspect the nozzles, they seem like they have a layer of ink dried on them, then pat dry the nozzles on a wet paper towel folded several thick layers. Blotteded several times after I insert the cartridge and try to print if you get good quality, this means that the head is dry or the wiper cleaning in the gas station is dirty and is wiping the ink dried on the head, clogging of the nozzles.
  
  Printheads in good condition will give you two solid black when erased ink lines. Or should I say on all the models that I worked and that's what the black print head made the color print head is a little different.
  
  If my post is a solution to your problem please click the accepted solution button under the post. You can also say thank you to a technician by clicking on the thumbs upwards the button under the post. You can even run amok and click on both buttons, .

• Header in .rtf model would not come on the first page?

  Hello
  
  I developed a custom AR States indicate, in the report I print several times on the second page (it should not come on the first heading of the page), how can I do this.
  Please enter your comments?
  
  Thank you
  Sridhar

  Hello

  Use the different first page header option.
  The first page is not giving any header leave it empty, give the details of the header on the second page, it will come to the remaining page as well.

  Thank you
  Ananth

• How to remove header, time and date of the Subvi "export waveforms to the spreadsheet file?

  I use 'Export waveforms for spreadsheet File.vi' in order to export the labview data into a file.

  However, the default format is the following:

  waveform [0]
  T0 13/11/2009 14:54:34
  Delta t 0.001000

  time Y [0]
  2009-11-13 14:54:34 - 2.441406E - 3
  2009-11-13 14:54:34 - 2.441406E - 3
  2009-11-13 14:54:34 0.000000E 0

  Yet I am interested in only the actual data without header or stamp date and time, for example:

  -2.441406E - 3

  -2.441406E - 3

  0.000000E + 0

  Could someone help me please with the adaptation of the Subvi to my needs?

  Transposes set to true.

• five out of six times (approximately) to start outlook express 6, it crashes while trying to access the first message

  five out of six times (approximately) to start outlook express 6, it crashes while trying to access the first message. This happens several times, and each time the first message (even) appears in the Inbox, even if the process is not complete. sometimes clear the cache, or cleaning IE temp. the files seems to help - but not always.

  It's VERY frustrating!

  Do a household.
   
  1: do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  2: after you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  3: disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3
   
  For some programs, turning it off is not enough. You may need to uninstall and reinstall in custom Mode and remove the analysis when e-mail messages.