FIRST HP: Exact values

Similar Questions

• How to get exact values.

  Hi Forum,

  I'm trying to get the page Width and Height of margin as a text in the slug area.

  When I have less pagewidh with pagemargin, I am getting the values in fractions like that.

  for example. 177.43999999.

  When I draw a rectangle box to check the width and height, the spectacle of palette measures exactly like that... 177,44

  How can I get the exact values I see in the measurement palette...

  var myTextFrame = myDocument.textFrames.add ();

  with (myDocument.pages.item (0) .marginPreferences) {}

  Save the current default value of the margin preferences application.

  var myY1 = top;

  var left = myX1;

  var low = myY2;

  var right = myX2;

  Set the default value of the margin preferences application.

  var mWidth = parseFloat (myPageWidth - myX1 - myX2);

  var mHeight = parseFloat (myPageHeight - myY2 - myY1);

  myTextFrame.contents = "Ratio: y = 1.75 x - final size work = (H)" + myPageHeight + "mm (W) x" + myPageWidth + "mm work set at 25% of the final format = (H) 2410mm (W) x 1370mm Live area = (H)" mHeight + "mm (W) x" + mWidth + 'mm'; "

  }

  Thanks in advance for the help...

  Thank you.

  Math.Round () always round to the nearest whole number (integer).  So suggestion of Jarek use Math.round in a particular way... it is not rounded mWidth directly - it is multiplying mWidth by 100, rounded to the nearest integer and then dividing by 100. This gives you exactly 2 decimal places of accuracy.  If you want 1 decimal place, use 10 instead of 100.  If you want 3 decimals, use 1000.

  Point number to a general routine to round off a float to an individual is the number of decimal places:

  rounding to a number of decimal places (tomaxxi)

  Number.prototype.doRound = {function (roundDec)}

  var roundMulit = Math.pow(10,roundDec);

  return Math.round(this*roundMulit) /roundMulit;

  };

  If you put the above code snippet at the beginning of your script, and then in the main part of your script you can just do this:

  mWidth = mWidth.doRound (3);

  If you want to round up more than 3 decimal places.

  As a general rule, you want to only do this in the user interface code, because there is a good chance that the will (in this case mWidth) number of rounding precision, not LOSE GAIN accuracy, when you round to a number of digits after the decimal point. (Explain exactly why this is true, it's a discussion more).

• DAQmx HAVE bridge Measurements - first and second values electrical and physical

  Hello

  Can someone explain the significance of the 'first electric value' parameters 'first physical value', 'second electric value' and 'physical second value', when you set up the information of scaling for measurement of the Bridge (pressure or force)?

  If I have a class scale 0 to 200 lbs with a sensitivity of 2mv/V and a voltage of 2.5V...

  I thought that the settings should be:

  Electric units = mVolts/Volt

  1st electric value = 0

  1st physical value = 0

  2nd electric value = 5 (2 mV * 2.5 v = 5 mV)

  2nd physical value = 200

  But it seems that the 2nd electric value is supposed to actually to be the sensitivity of the sensor (in this case 2 mV).

  Am I missing something here?

  Hi ebloohm,

  That is right. For your load cell excitation of the 2.5V will give you a rangle of 0-5 mV for output. You 0mV at 0 kg and 200 pounds, you will have 5 mV. The values in the table are used to scale readings of mV to lbs. The sensitivity of the sensor is already taken into consideration with the mV range values. If the cell has a sensitivity of 3 mV/V you instead would have 0 and 7.5 to your table. The good values in your original post.

• Set up printer DPI to exact values. For example, 1200 DPI, 300 DPI or DPI 101.

  I really need to set the exact DPI to match the impression of an image in an optical system.  Must I set the DPI of the specific values of impression, but I still find using Windows 7 DPI settings.  I don't want to change the operating system to print an image.

  Hello MS Basic,

  1. What is the brand and the manufacturer of your printer?

  2. What is the maximum DPI supported by your printer?

  3. have you had any printer software installed on your computer with which you used to change the DPI?

  I suggest that you try to modify the ppp from the printer settings or if you have any printer software installed. You can check the printer manual to find the settings. I also suggest that go you back with the brand and the manufacturer of your printer to verify the specifications.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Select the records from the first n distinct values of column

  I need to write a query in plsql to select records for the first 3 values distinct from a single column (example below, ID) and all lines for the next 3 distinct values of column and so on until the end of the number of distinct values in a column.
  for example:
  Age of name ID
  1 abc 10
  1 def 20
  2 IA 10
  2 20 JKL
  2 mno 60
  3 10 pqr
  4 the RST 10
  4 10 TÜV
  5 vwx 10
  6 10 XYZ
  hij 6 10
  7 lmn 10
  .
  .
  .
  so now... (up to a few County)
  Result must be
  1 the application should result->
  Age of name ID
  1 abc 10
  1 def 20
  2 IA 10
  2 20 JKL
  2 mno 60
  3 10 pqr
  
  Query 2 should lead to->
  4 the RST 10
  4 10 TÜV
  5 vwx 10
  6 10 XYZ
  hij 6 10
  
  Query 3 should lead to->
  7 lmn 10
  .
  .
  9... ..
  so now...
  How to write a query for this inside a loop.

  Hello

  Thus, a panel will consist of the lowest id value, the 2nd lowest and the 3rd lower, reggardless of how many lines is involved. The next group will include the 4th lowest id, the 5th lowest and the 6th lowest. To do that, you must assign the numbers 1, 2, 3, 4, 5, 6,... for the rows in order by id, with all lines with the same id, getting the same number and without jumping all the numbers.
  This sounds like a job for the analytical DENSE_RANK function:

  WITH     got_grp_id     AS
  (
       SELECT     id, name, age
       ,     CEIL ( DENSE_RANK () OVER (ORDER BY id)
                 / 3
                 )          AS grp_id
       FROM     table_x
  )
  SELECT     id, name, age
  FROM     got_grp_id
  WHERE     id     = 1     -- or whatever number you want
  ;
  

  If you would care to post CREATE TABLE and INSERT statements for your sample data, then I could test it.
  See the FAQ forum {message identifier: = 9360002}

• How to create a chart for the exact values in PivotTable

  Hi all
  
  How can I create a graph exactly indicating swivel values. I created a PivotTable and suppress the display of the table. When I create the chart it does not show the graph for the pivot table values.

  to do this, you must modify pivot table properties, and then select chart pivot results tab in the top middle... hope this helps

• the index of the first/last numerical value

  Hello
  
  I want to find the index of the first numeric value in a string. I can do this by using built-in features of Oracle? (Without creating a new function)

  I want to find the index of the first numeric value in a string

  regexp_instr could do (for the first digit):

  SQL> select regexp_instr('abc1def2', '\d') first_digit from dual
  /
  FIRST_DIGIT
  -----------
            4
  1 row selected.
  

• Problems with Illustrator CC 2015 curved inner soothing brush even when the exact value.

  I'm having a problem where I draw something with the Brush tool with my wacom pen and it looks fine until I got let go and then it's as if the post drawing render distorted and it too smooth inside the curves according to sharpness, they are. I adjusted the brush settings... STROKE... precision smooth verse... nothing seems to solve this problem.  I have an identical to the office computer and it does not it so makes me think that there is a setting applied effect that I'm just missing. I enclose some images of what I mean. Any ideas on what could be the cause?

  The first image is as I paint before I lift pen up to complete the race.

  

  The second image is what happens when the race is based in fact after I lift the pen and finish the race. Notice the change to the inner parts of the curves almost straightening. Note: the curve of the stoke itself is actually always where I drew but the visible thickness on the stoke is what seems to change, even if developed.

  

  

  The other two are my applied settings.

  

  I reinstalled the two illustrator and my wacom records, thinking that perhaps issues as well. nothing has changed. I use this tool quite often but it's been several weeks that I modified it used. I don't seem to have this before show and as I mentioned on an identical machine has not there must be something central to this right machine? We even compared the brush options and tool but seemed okay if they were the same or not. Ideas?

  help U or traits of curly form filling space

• Return to the right of the first white space values

  Hello
  I use Toad for Oracle 10.5 and cannot figure out how to return only the values after the white space for apple to field. I tried to trim, rtrim, ltrim leads; etc... I create table and some inserts to test if possible. Thanks for reading this thread.
  

  select trim(leading '' from apple)
  FROM tbl_test 

  Create Table

  CREATE OR REPLACE FORCE TABLE TEST
  (
     APPLE  VARCHAR(20),
     ORANGE VARCHAR(20)
    
  )

  Inserts

  INSERT INTO TBL_TEST 
  (APPLE, ORANGE)
  VALUES
  ('123 TEST3', 'TEST');
  
  INSERT INTO TBL_TEST 
  (APPLE, ORANGE)
  VALUES
  ('4567 TEST2', 'TEST');
  
  INSERT INTO TBL_TEST 
  (APPLE, ORANGE)
  VALUES
  ('1 TEST3', 'TEST');
  
  INSERT INTO TBL_TEST 
  (APPLE, ORANGE)
  VALUES
  ('12 TEST4', 'TEST');

  Not:

  select apple from tbl_test
  
  APPLE
  123 TEST3
  4567 TEST2
  1 TEST3
  12 TEST4

  The results that I want:

  select * from tbl_test
  APPLE
  TEST3
  TEST2
  TEST3
  TEST4

  select SUBSTR(apple, INSTR(apple, ' ')+1) from tbl_test;
  

  Output:

  TEST3
  TEST2
  TEST3
  TEST4
  

• What is the exact value of gravity in sequels?

  I just want to know if the severity in consequences is m / s ^ 2, or if it is a ratio (ex: 1 ratio would be 1 times the Earth's gravity). I want to know, because if I want to reproduce something fall after effects I could put 9.8 m / s ^ 2 as the actual severity of the Earth.

  Sorry for my English, I know that I do not use the exact words...

  Thank you!

  Agreed.  I think as all plugins come by different designers and at times different (CC Particle World, Shatter, individual etc.) I doubt there is no correlation between their different plans of the application of gravity.

  More to the point, apart from the factor of interest, is it really important?  Surely the result should be assessed visually rather than scientifically.  Adjust the setting until you get the desired result, simple as that.

• display the exact value of a slide to the digital indicator whenever it is changed

  the subject says it all

  Right-click to digital exhibition

  Ben

• first camera default values

  Hi, I tried things in camera raw in extended cs5.5 and I can't work on how to reset the default settings. Everytime I open an image in raw it's clearly wrong. Can someone please help?

  
  

  Welcome to the forum!

  According to an excerpt of the book of Camera Raw controlspractice, control 'default' (circled in red in the image below) "provides a simple way to return to the default Camera Raw settings in the base Panel based on your current default settings (which can be changed)."

  

  And here's a great introductory video on the version of Camera Raw that shipped with Photoshop CS5:

• Value not subject to the entry list of values on tab out if an exact match is found

  Hi all

  I use Jdeveloper 12.1.3 (Alta Skin). I have a model based on the input of component values list.

  If I enter the exact value and press tab, the value is always set to the value of the LOV first.

  The value entered is lost and always return the first value of LOV if an exact match is found. Eneterd value is not properly submitted to the server.

  How to present the value if only one match is at LOV released tab?

  Here is my code:

  < af:inputListOfValues id = "DepartmentNameId".

  popupTitle = "search and select: #{bindings." DepartmentName.hints.label}.

  value = "#{bindings." DepartmentName.inputValue}.

  label = "#{bindings." DepartmentName.hints.label}.

  model = ' #{bindings. " Required to DepartmentName.listOfValuesModel'} = 'true '.

  columns = "#{bindings." DepartmentName.hints.displayWidth}.

  shortDesc = "#{bindings." AutoSubmit DepartmentName.hints.tooltip}' = 'true '.

  contentStyle = "" text-align: left ""

  valueChangeListener = "#{DepartmentInfoListener.setNestNumValue}" >

  < f: validator binding = "#{bindings." DepartmentName.validator} "/ >"

  < af:convertNumber groupingUsed = 'false' pattern = ' #{bindings. " DepartmentName.format} "/ >"

  < / af:inputListOfValues >

  the value is always set to the value of the LOV first.

  This is usually related to missing key (or wrong) in display used by LOV object.

  Dario

• Structure of the event run only on first change of the value

  Hi all

  I would like to a structure of the event to run only on the first change of value. I currently put to run on the change in the value of a Boolean value. I'm only interested in what happens the first time that the Boolean value changes; However, he changes several times during a single run of my vi. Is it possible to limit the structure of the event so that it runs only on the first change of value? I have attached the relevant part of my VI. Thank you in advance for any help, you will be able to provide.

  Thank you

  yp21

  
  

• AF:inputListOfValues sets the value of the first item in the result set when using enter key or tab and component value autosubmit = true

  I use JDev 11.1.1.6 and when I type in a value in an af:inputListOfValues element and press enter or the tab key, it will replace the value I entered with the first element in the set of results LOV. If enter a value, simply click on the component af:inputListOfValues it works correctly. If I use the popup and find a value it works properly as well. I have a programmatic view object that contains a single transitional attribute (this is the view object that is used to create the list of the components of the value of) and then I have another object from view based on entities which defines one of its attributes in a list of the attribute value. I tried to use a base object view of entity to create the LOV to and everything works as expected, so I don't know if this is a bug when using programmatic view objects or if I need more code in the VOImpl. In addition, it seems after that first of the value being replaced by the first value in the result set that it will work correctly as well. Here are some excerpts of important code.

  Also, it seems that this does not work only if the text entered in the component af:inputListOfValues would have only a single game, returned in the result set. For example, given the result defined in code: Brad, Adam, Aaron, Fred, Charles, Charlie, Jimmy

  If we get into Cha, the component works as expected

  If we register A, the component works as expected

  If we get Jimmy, the component does not work as expected, and returns the first value of results IE. Brad

  If we get Fred, the component does not work as expected, and returns the first value of results IE. Brad

  I also checked that I get the same behavior in JDev 11.1.1.7

  UsersVOImpl (programmatic view with 1 transitional attribute object)

  import java.sql.ResultSet;
  
  import java.util.ArrayList;
  import java.util.Iterator;
  import java.util.List;
  
  import oracle.adf.share.logging.ADFLogger;
  
  import oracle.jbo.JboException;
  import oracle.jbo.server.ViewObjectImpl;
  import oracle.jbo.server.ViewRowImpl;
  import oracle.jbo.server.ViewRowSetImpl;
  
  // ---------------------------------------------------------------------
  // ---    File generated by Oracle ADF Business Components Design Time.
  // ---    Wed Sep 18 15:59:44 CDT 2013
  // ---    Custom code may be added to this class.
  // ---    Warning: Do not modify method signatures of generated methods.
  // ---------------------------------------------------------------------
  
  public class UsersVOImpl extends ViewObjectImpl {
  
      private static ADFLogger LOGGER = ADFLogger.createADFLogger(UsersVOImpl.class);
      private long hitCount = 0;
  
      /**
       * This is the default constructor (do not remove).
       */
      public UsersVOImpl () {
      }
  
      /**
       * executeQueryForCollection - overridden for custom java data source support.
       */
      protected void executeQueryForCollection (Object qc, Object[] params, int noUserParams) {
  
           List<String> usersList = new ArrayList<String>();
           usersList.add("Brad");
           usersList.add("Adam");
           usersList.add("Aaron");
           usersList.add("Fred");
           usersList.add("Charles");
           usersList.add("Charlie");
           usersList.add("Jimmy");
  
           Iterator usersIterator = usersList.iterator();
           setUserDataForCollection(qc, usersIterator);
           hitCount = usersList.size();
           super.executeQueryForCollection(qc, params, noUserParams);
  
      } // end executeQueryForCollection
  
      /**
       * hasNextForCollection - overridden for custom java data source support.
       */
      protected boolean hasNextForCollection (Object qc) {
  
           Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
           if (usersListIterator.hasNext()) {
       
               return true;
  
           } else {
  
               setFetchCompleteForCollection(qc, true);
               return false;
  
           } // end if
  
      } // end hasNextForCollection
  
      /**
       * createRowFromResultSet - overridden for custom java data source support.
       */
      protected ViewRowImpl createRowFromResultSet (Object qc, ResultSet resultSet) {
  
           Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
           String user = (String)usersListIterator.next();
           ViewRowImpl viewRowImpl = createNewRowForCollection(qc);
  
           try {
  
               populateAttributeForRow(viewRowImpl, 0, user.toString());
  
           } catch (Exception e) {
  
               LOGGER.severe("Error Initializing Data", e);
               throw new JboException(e);
  
           } // end try/catch
  
           return viewRowImpl;
  
      } // end createRowFromResultSet
  
      /**
       * getQueryHitCount - overridden for custom java data source support.
       */
      public long getQueryHitCount (ViewRowSetImpl viewRowSet) {
           return hitCount;
      } // end getQueryHitCount
  
      @Override
      protected void create () {
  
           getViewDef().setQuery(null);
           getViewDef().setSelectClause(null);
           setQuery(null);
  
      } // end create
  
      @Override
      protected void releaseUserDataForCollection (Object qc, Object rs) {
  
           Iterator usersListIterator = (Iterator)getUserDataForCollection(qc);
           usersListIterator = null;
           super.releaseUserDataForCollection(qc, rs);
  
      } // end releaseUserDataForCollection
  
  } // end class
  
  

  <af:inputListOfValues id="userName" popupTitle="Search and Select: #{bindings.UserName.hints.label}" value="#{bindings.UserName.inputValue}"
                                                label="#{bindings.UserName.hints.label}" model="#{bindings.UserName.listOfValuesModel}" required="#{bindings.UserName.hints.mandatory}"
                                                columns="#{bindings.UserName.hints.displayWidth}" shortDesc="#{bindings.UserName.hints.tooltip}" autoSubmit="true"
                                                searchDesc="#{bindings.UserName.hints.tooltip}"                                           
                                                simple="true">
                            <f:validator binding="#{bindings.UserName.validator}"/>                       
  </af:inputListOfValues>
  
  
  
  

  I found a solution to this problem. It seems that, when using a view object programmatic that has a transient as its primary key attribute, you need to override the methods in the ViewObjectImpl so that he knows how to locate the line related to the primary key when the view object records are not in the cache. That's why it would work properly sometimes, but not always. Here are the additional methods that you must override. The logic you use in the retrieveByKey would be on a view view object database object and would be different if you had a primary key consisting of multiple attributes.

  @Override
  protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i) {
      return retrieveByKey(viewRowSetImpl, null, key, i, false);
  }
  
  @Override
  protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, String string, Key key, int i, boolean b) {
  
      RowSetIterator usersRowSetIterator = this.createRowSet(null);
      Row[] userRows = usersRowSetIterator.getFilteredRows("UserId", key.getAttribute(this.getAttributeIndexOf("UserId")));
      usersRowSetIterator.closeRowSetIterator();
      return userRows;
  
  }
  
  @Override
  protected Row[] retrieveByKey (ViewRowSetImpl viewRowSetImpl, Key key, int i, boolean b) {
      return retrieveByKey(viewRowSetImpl, null, key, i, b);
  }