First text field in the page submit when the Enter key is hit. Don't want to send

Similar Questions

• Text fades with the Enter key, but not with CTRL-ENTER

  I followed the steps I found in the tutorials, but my TEXT does not fade when I run the web-page version (CTRL-ENTER) even if it fades when I just hit enter in Flash. (I have converted the text to the symbol - graphic video and film)
  
  Images fade very well in both.
  
  Is this something simple, I'm blind?
  
  

  Quote:
  Posted by: : orl@ndo:
  try to incorporate a font you use for a text fields...

  I did not understand fully what you were suggesting that I do here: orl@ndo:, but it gave me food for thought.

  This isn't what I expected, but I found that setting the texts "static" solved the problem. I still need to read and to know WHY who did, but for now, the issue is resolved.

  Thank you for your quick response to my question.

• Having to handle the Enter key on windows

  Hi all

  I used three real edit boxes to store the value in three units (Points, inches and Milimeter)

  Now, I want to treat enter as follows.

  I put a value in an edit box

  I pressed the Enter key.

  Now, I want to update the value of other two edit box

  If someone manage "Enter Key" for such scenerio so please help me.

  Thank you and best regards,

  Alam

  Hello

  Try adding IID_IEVENTHANDLER to your kRealEditBoxWidgetBoss. Then you should be able to capture the KeyDown event (arisen * can).

  Interface look, using GetChar(), method, you can treat something when GetChar() returns kReturnKey or kEnterKey

  Concerning

  Bartek

• Turn off the text field (always submits page when you press enter)

  I have an area which allows you to enter search criteria. There are two fields and a button. The 1st field is a selection list that gives a list of columns in a database that can be searched on. The 2nd field is where the user enters the value to search for. The user can submit the search in 2 ways. They can press the button or press return when the cursor is in the 2nd item that is a text field (always submits page when you press enter). The results are then displayed in a region of report below.
  
  The problem I have, is that if the request is for > 10 seconds and the user gets impatient and hits the Enter key or the button search again the query is returned for a second time (or third or fourth according to the impatience of the user) causing the claim on the basis of data with a negative impact on the performance of the system.
  
  I know how to handle the search key. On a click event on I turn off the button so that the user cannot click on it again and resubmit the request.
  
  My question is - how can I turn off "always provides a page when you press enter" text item when the user presses enter? I tried an onclick event, but disabled the front element I could type in anything. Onblur event does not seem to do anything.
  
  Any ideas would be very appreciated.
  
  Andy

  Hello

  First of all, one thing to try: attributes of the Page, there is a section for the presentation in double - try setting this option on no.

  Otherwise, using the text field type, adds the following to the INPUT tag:

  onkeypress="return submitEnter(this,event)"
  

  which means, you can call your own function of javascript on the onkeypress event, the final line would be call submitEnter(). But you can set the value of a hidden page element:

  function doEnter(t, e)
  {
   if ($x('P1_SEARCH_RUNNING').value == 0)
   {
    $x('P1_SEARCH_RUNNING').value = 1;
    return submitEnter(t, e);
   }
   else
   {
    return false;
   }
  }
  

  Then, after changing your element to an element of normal text on the attributes of HTML form elements, add in:

  onkeypress="return doEnter(this,event)"
  

  Andy

• Text field (always submits page when you press enter)

  Hello
  
  I have two elements (username and password) and two buttons (Submit & cancel) when the user enters the correct DB table entry values and strike button SUBMIT with the < /b > < b > mouse it is able to go to the next internal page does not, up to here everything works absolutely perfect.
  
  But now, instead of clicking the button "SUBMIT" with the mouse, I want the user to use the functionality of the ENTER key on the keyboard and so I apply the two elements (username and password) as < b > text field (always submits page when you press enter) < /b > and < b > password (submits when you press enter) < /b > respectively.
  
  Also created a conditional branch and an unconditional branch (with the highest sequence number) by the research of the below thread: -.
  
  Re: Text field Element submits page when you press ENTER
  
  but still did not find any success, when I run the page with the correct details in the elements and press button nothing works the same page returns back to me with these two elements as empty?
  
  any help?
  
  
  thxs
  
  
  Kind regards
  Kumar

  Hello

  OK - two things...

  First of all, your branch to page 9 was conditional on the SUBMIT button

  Second, you had the condition that "request = Expression 1" where it should be "EXISTS.."

  I removed the button state and changed the condition type. Try it now

  Andy

• Text field for the (nieme second word) on the Page

  The script adds text fields on a page based on the search for the word DATE.

  This script must be changed to add the text field for second occurrence of the word DATE only on the page and NOT the first occurrence of the word.

  Currently, the script adds a text field for all occcurances of the word DATE.

  Any help will be greatly appreciated.

  Thank you.

  / * Add on manual transmission date text field * /.

  var this.numPages = NUMPAGES;

  for (var k = 0; k < numpages; k ++)

  / * 1st co - ord = Horizontal, 2nd co - ord = vertical, 3rd co - ord = width, 4th co - ord = height * /.

  {

  {

  numWords var = this.getPageNumWords (k);

  for (var i = 0; i < numWords; i ++)

  {

  var ckWord = this.getPageNthWord (k, i, true);

  If (ckWord = 'DATE')

  {

  var q = this.getPageNthWordQuads (k, i);

  Convert quads in the rotation by default user space

  Userspace used by links.

  m = (new Matrix2D).fromRotated(this,0);

  mInv = m.invert)

  r = mInv.transform (q)

  r = r.ToString)

  r = r.split(",");

  var f = this.addField ("Date", "text", k,

  ([r [0] * 1.10, r [1] - 10, r [2] * 1.3, [5] r-15]) ;

  }

  }

  }

  }

  Try something like this:

  var this.numPages = NUMPAGES;

  for (var k = 0; k)< numpages;="" k++)="">

  var nDateCount = 0;  Initialize counter

  numWords var = this.getPageNumWords (k);

  for (var i = 0; i)< numwords;="" i++)="">

  var ckWord = this.getPageNthWord (k, i, true);

  If (ckWord = 'DATE') {}

  nDateCount += 1;  Incrementing counter

  If (nDateCount == 2) {}

  var q = this.getPageNthWordQuads (k, i);

  var m = (new Matrix2D).fromRotated(this,0);

  mInv var = m.invert ();

  var r = mInv.transform (q).

  r = r.toString ();

  r = r.split(",");

  var f = this.addField ("Date", "text", k, [r [0] * 1.10, r [1] - 10, r [2] * 1.3, [5] r-15]);

  break;  No need to keep the current page search

  }

  }

  }

  }

• change /-the font size of a text field on master pages is not possible? (field prop)

  Hello

  I would like to change the font and the font size of a textfield on a master page.

  I wonder if I did anything wrong, because font options (size, fonts, etc.) are simple grayed out / not available, when I click on my text field.

  Apparently, there is a way to customize the font properties of a textfield (only) on the master page.

  Well, I guess it would work with java script in the event init... but really, why the hell it should not possible just use properties/text properties?

  Please correct me if I'm wrong. I'm doing something wrong, or is it really not possible to customize the police of a text field on master pages?

  Import you the form in the designer?

• Limit the first character in the text field to the letter and numbers?

  How can I limit only the first character entered in the text field as the letter H (uppercase) or any number? Thanks in advance.

  function of validateMemberID was a mistake on my part misnamed it. I thought about it...

  At the level of the JavaScript document

  Allow only characters that match the regular expression
  function validatePartialMemberId (value) {}
  return / ^ [H0-9]?\d{0,10}$/.test(value);
  }

  function validateFullMemberId (value) {}
  return / ^ [H0-9]\d{10}$/.test(value);
  }

  function checkMemberId() {}
  Get all of the characters that the user has entered
  var value = AFMergeChange (event);

  Allow the land to be developed
  If (! value)
  return;

  If (! event.willCommit) {}
  Event.RC = validatePartialMemberId (value);
  }
  }

• Move from one field to the other and to validate the response to the first text field automatically

  I have a problem I want to know if someone could help me with.

  I have a dynamic text box called help_txt and I have some initial instructions in order to achieve the first text field with relevant information.

  Selection.setFocus (prCv1_txt);
  Selection.setSelection (1, 0);

  The focus is already set at the beginning of the first text field, which has 2 characters maximum indicated. It is also a text entry field.

  The right answer for prCv1, which is the variable, is 01.

  If the user types 01, I want the following to happen:

  cursor automatically advances to the next text field, which is called groupNo1_txt and I want another message to display the correct information in the field of help_txt, such as the type in the next field.

  If the user does not type 01, I want the following to happen:

  cursor goes back to position 1 of the prCV1_txt text box and another message to display in the field help_txt, by mistake, please enter 01 in this area.

  Initially, I got the code to check if the user pressed the Tab key, but the error message for the 2nd text box automatically displays do not give the user the ability to type information in the second text field (groupNo1_txt).

  Can someone help me please!

  If you need me to attach a file, I can do.

  Thank you...

  Use a conditional in the onChanged function that tests first to see if the entry is at the correct number of characters...

  If (prCv1_txt.length > 1) {}

  If (prCv1_txt.text == "01") {}

  Disable prCv1_txt, select groupNo1_txt

  } else {}

  Msg error and/or reboot

  }

  }

• How can I add a text field for the main menu?

  I have a project with a menu.  He has a title.  I wanted to add an additional track on the menu, what I had done in an earlier draft.  I would have thought he would have intuitively obvious, as highlighting the existing title I and do a copy and paste.  However, I learned that nothing is intuitive with Premiere elements 12.  Can someone tell me how to get a 2nd title on my main menu?  I have done it before, but apparently did not write it and I was faced with that I falsely assumed would take me 30 seconds to accomplish.  Thank you.

  Rick

  Do you really need a second title for the page in the main menu and the selection of scene or you page fixed for your Adobe title in more than one line?

  I wonder

  I wanted to add an additional track on the menu, what I had done in an earlier draft.

  Is it possible that as soon as you use a theme which came with 'subtitle', as the trip/Beach Resort, not all do.

  

  Workaround for the title with more than one line of text can backfire on you. But you can try. Excerpt from my first items 13 on this blog

  0019 first Elements 13 movie Menu title question: multiple lines of text

  
  A first elements 13/13.1 user reports that, if it creates a 3 lines of title text for the main menu of the fake big screen theme in the customization area of Movie Maker project, these 3 lines of text eventually "encoded" in the project of reopening after that that there had been closed.

  We have confirmed this report and extended it to include this problem appears for 13 of Menus other than the fake Widescreen cinema. This issue is not seen in first items 12/12.1 and earlier versions.

  BEFORE REOPENING THE CLOSE SAVE

  Figure 1. Main menu of Spring Flower home with 3 lines of text, as seen before the closure of the Reopen

  AFTER THE REOPENED NARROW SAVE

  
  

  Figure 2. Spring Flower main Menu title initially with 3 lines of text, as seen from the closure of the Reopen

  
  
  The only way found so far to get the final product to have 3 lines of title text for menus in the final product is to customize the theme to the movie Menu in the customization of the Menu movie of the project area, do not save, close the project at this time and can do the burn to.

  
  Many variables were examined to explain this behavior. So far, no answer for why.

  If you are determined to use a particular theme that comes with the title menu and subtitle, look at the text of the Palette layers layers in the editing menu .psd file (.psd Editor could be Photoshop CS or higher).

  Regarding

  on my project last year that was the menu that I liked with 2 text fields, I have also got rid of the "arrow" shortly before the text that was the menu key.  Anyone know how I do that?  I can't figure that out now.

  Could you be more specific. But, for now, consider... If you Play All text, you double-click to open the text of the amendment, the deleted text, click OK. Play All disappeared. Sometimes, in page and removal of text "main menu" scene selection to the navigation button... double click on the button to open the changes to the text, delete text, press ENTER, and then bar spacing, and click OK.

  Please let us know if everything above the target you wanted to know.

  Thank you.

  RTA

• How can we make invisible static value in a text field to the OPA

  Hi all

  I have invisible static value in a text field in the OPA.

  For ex: field contains the value 100 while we manage the maintenance should not display the value 100 or make us the text as invisible field. whenever we submit the interview the value should be passed.

  I made the background color of the text in white field, but it reflects all the text fields. I need to make the text of the particular text as invisible field. Can someone give me a solution for it.

  Use two different attributes (the one that is indicated in the interview to the need - for example, as "the id selected user" or whatever the phrase is appropriate) and a different attribute, which is the mapped attribute.  The second attribute must not be on any screen of the interview (by thus "invisible" for the user).  Write a table of rules that concludes that the value of the attribute mapped on is EITHER static value or the selected/expected value according to some logic is appropriate to make a decision in your model of strategy.

• Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. Thank you!

  Is there an easy way to create "the mouse on the text, to display the image" without coding it? I want an image to appear only when you move to a line of text. I found the code for it but I want to find an easier way. I'm creating a home page with a list of text links. I want to design as well as in the overview of one of the text links, a corresponding image is displayed to the right of the page. I also need a default image to rest all the time unless one of the other links text is hovered over. Thank you!

  Try to use a Widget for Composition in the Adobe Muse Widgets Panel.

  I would like to start with a blank publication.

  Place your text in the button area.

  Place your image in the display area.

• Filled text field, clear the default checkbox

  I've seen a lot of question and scripts on when a box is checked, then the text field copies the value of the checkbox.

  What I'm trying to do is the opposite, i.e. If a text field is empty, the check box by default is checked; But if the text field is filled with what, check the check box disappears. Could someone help with scripts?

  Let's say that the checkbox is named "Check Box1". Enter this code in the custom text box validation event:

  this.getField("Check_Box1").checkThisBox (event.value == 0, "");

• Default properties for the text field of the PDF forms

  How can I set the default properties for the text field?  The creator of forms set of font sizes that are too large.

  Right-click on the field > use current properties as new default.

  It will keep the new settings until the next time that you do this. It is not specific to the document. Do it separately for each field type (text, button, etc.)

  

  On an existing form, you can select multiple fields. A pro tip, is that you don't have to close the properties to move from the field to the field to the field. Dungeon opens and work faster.

• I would like to create an editable text field in a page?

  I would like to create an editable text field in a page?

  Check out my tutorial here:

  Fields in edge animate - Tutorial #9