Flash IOS StageWebView no sound

Similar Questions

• How to start with no flash IOS

  I have a 2950 that's at the level of the switch: fast with no flash IOS.  When I try to copy an IOS image via tftp I get "tftp: access denied."

  Is there another way I can copy the image in flash?

  Hello

  2950 switches in bootloader mode do not support networking. Your only option is the download of IOS using the console and HyperTerminal or TeraTerm - you need to support Xmodem or Xmodem - 1 k.

  Follow these steps:

  1. In the bootloader on the switch prompt, enter the value BAUD 115200 and press ENTER. Be sure not to do typo here. As soon as you enter this command, your console will appear to freeze - at this point, reconfigure your terminal software to use 115 200 bit/s and press enter several times - the switch should start responding again.
  2. The IOS of replacement prepared on the PC, however, rename it to a simple file name, for example, c2950.bin.
  3. Enter the following command on the switch: copy xmodem:c2950.bin flash: c2950.bin and press ENTER. Once you do this, a series of characters 'C' will start appearing on the screen.
  4. By using the send a file or file transfer feature in your terminal software, select Xmodem - 1 k (preferably) or the Xmodem Protocol, and then locate the c2950.bin file and leave the Terminal send it to the switch.
  5. Take a coffee - download can last 15-30 minutes.
  6. Once the download is complete, enter the command unset BAUD in the switch and reconfigure your device back to 9 600 bit/s. The console will be insensitive in the meantime.
  7. Enter the command boot on the switch, it should start fine. After it starts in IOS, you can rename the IOS file in the FLASH back original name using the Rename privileged EXEC command.

  Best regards
  Peter

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• Messed up after updating ios 10 notification sounds

  I have updated to ios 10. Incredible update and im love it. But the notification in application as whatsapp Messenger is messed up. Whatsapp defining its 'Note' but when I get the notification I get "Tritone". Although even i change the default setting for different sounds in the same "Tritone" comes when I get something...

  I've heard that some people are experiencing the same thing. Help, please

  Try the hard reset by the press, the power and the home buttons and keep them pressed until the Apple logo appears on the screen and release your fingers.

  I hope this will help

• How can I download flash ios?

  My pix has 4,0000 ios. How to download Flash. Thank you!

  You can not.

• How to add a flash ios app to play Center?

  Hello

  Flash Pro CC

  16 AIR SDK

  How can I add the iOS app to Game Center and present the best score?

  I see people refer to this http://www.milkmangames.com/blog/tools/#iosgc

  is there another way?

  Thank you.

  for those looking for a response

  Adobe Gaming SDK is the solution, you don't have to buy other extensions to add your Game Center app.

• The use of sound in Flash. Why the sound stay synchronized when I publish?

  I worked with the sound for a while trying to get it right to put it on YouTube. I finally got that sound worked in Flash. When I export to video I liquidate the lack of synchronization with sound. It does no londer faithful to the Flash program. Does anyone have a useful understanding?

  It is possible to use ActionScript, but unless it is really necessary with your workflow, since you already know how this method works, I recommend sticking with the applicant in the timeline but then check your sound properties in the properties panel, and switch between the different options (I think there are 3 options) to see which gives you the most accurate result.  An event, a flow, and I do not remember one 3rd.  You will also want to go into the settings of your SWF publish and choose appropriate or any export options that called for sound.  There are 2 fields that are stacked on each other and you must set the properties in addition to the default value, if your default settings do not work for you.

  Let us know how make you out with these changes.

• SoundJS with Flash HTML5 Canvas - break sound & update the lib?

  I'm looking to do some basic audio control in the Flash timeline, exporting HTML5 canvas.

  On the frame of 10 I am loading/reading a file with:

  audio1 var is createjs. Sound.Play("Sounds/course3_mod1_2.mp3");

  Who plays, but then I can't figure out how to make a pause as the beep several frames later at a briefing of the animation to a timeline. I read that there is a method. pause() methods, as well as chassis 50 that I use:

  AUDIO1.pause ();

  This does not work for me - I must be missing something pretty obvious regarding variables references on the timeline...? In the console of Firefox, I see the JS error:

  ReferenceError: audio1 is undefined.

  If it's important, the process of publication included "0.5.2.min.js", although I do not have the latest version of CA is "0.6.0.min.js". I'm also very curious how I would update my CC Flash (version 20141) to use this latest version of the library compared with older he current attaches to the HTML code. I guess I can (in the publication settings) uncheck the option 'Hosted libraries', and then manually download new libraries and replace them in the folder. But not this crushed with each publication? And what happens if I still want a link to a hosted version the later?

  somascope wrote:

  On the frame of 10 I am loading/reading a file with:

  audio1 var is createjs. Sound.Play("Sounds/course3_mod1_2.mp3");

  Who plays, but then I can't figure out how to make a pause as the beep several frames later at a briefing of the animation to a timeline.

  That cannot possibly work. If it worked, it is no more. The SoundJS, the documentation is very clear that "before you can play a sound, it must be saved.» You need to do something like this:

  // create global alias to main timeline for event handler
  _main = this;
  // wait for sound to preload
  this.stop();
  // assign load event handler
  createjs.Sound.on("fileload", handleLoad);
  // load and register sound
  createjs.Sound.registerSound("mysound.mp3", "soundID");
  // play sound and start timeline playing
  function handleLoad(event) {
      _main.audio1 = createjs.Sound.play("soundID");
      _main.play();
  }
  

  Then, to put in pause/resume, follow these steps:

  this.audio1.paused = true; // pause
  

  this.audio1.paused = false; // resume
  

  Reference: is there a pause() method? · Number #200 · CreateJS/SoundJS · GitHub

  Note that var creates variables that have only the scope of the framework. To the current scope of timeline, you must use this..

  If it's important, the process of publication included "0.5.2.min.js", although I do not have the latest version of CA is "0.6.0.min.js". I'm also very curious how I would update my CC Flash (version 20141) to use this latest version of the library compared with older he current attaches to the HTML code.

  DO NOT do it. Each new version of Flash CC publishes the files that target a specific version of the CreateJS library, so try to cram in a different version will certainly break things. But why you are still using Flash CC 2014? You should be able to upgrade to CC animate.

• Plugin to convert Flash Flash IOS

  I think I read that somewhere that Adobe relesed a plugin update to convert Flash to IOS compatibility. Can someone tell me the download?

  Thank you

  Joe

  Either the version CS5.5 or CS6, you can choose to create a new LOOK for IOS file in the file... New... menu.  For CS5 it was and is still an update is available at: http://www.adobe.com/support/flash/downloads.html

  Is that what you are looking for?

• Box2d and Flash iOS

  So I made a simple ball with WCK Box2D physics engine, and when I tested it out on the compiler (just tested on the computer) adl, it worked flawlessly, as I had planned. So I assumed that when I bundled in an IPA to test on my device, it should work as it did when I tested in the compiler. I was wrong, and I believe, that so, I come to the conclusion that the Box2d WCK script does not work when I compile it all this in an IPA. Can someone help me understand what the problem is?

  Details

  • I have included the WCK files in the settings of the Iphone OS in 'input queues.
  • Added the SWC in the library path in the ActionScript settings.
  • Include the path to the source files.
  • Works perfectly on the computer, but not on my device/iPhone.
  • I checked it to export the SWC file in the SWF settings under profile.
  • Class is defined and works.
  • Without errors or bugs, again works perfectly on the test, but not as an application.

  I think I read somewhere that I might need to compile as a profile of the air and covert it to an API through command line, but I am not sure which, and I don't know who's going to fix my problem. It would be great if someone could point me in the right direction or let me know what I need to do! Thank you!

  Found a solution. Package with the SWF with Flash Builder and he was clean and very well!

  Tutorial for package SWFs: http://Renaun.com/blog/2011/05/using-Flash-Builder-4-5-to-package-arbitrary-SWFs-for-iOS-a ndroid playbook. Flash Builder: http://www.Adobe.com/products/Flash-Builder.html

• IOS: play (not) sound of local filesystem - Error #2032

  Hi all

  I'm working on an application where I (among others) want to play audio files from the local file system.

  I added a few mp3 files in my .ipa file.

  With a file browser small in my application I can choose one of them which returns me a file object.

  I then use this File object to a URLRequest to load the sound:

  var req:URLRequest = new URLRequest (file.nativePath);

  Sound = new Sound();
  

  sound.addEventListener (IOErrorEvent.IO_ERROR, soundLoadError);
  sound.addEventListener (Event.COMPLETE, soundLoaded);
  Sound.load() (req);

  It works in flash, but fails on the iPAD. Whenever I try to load, I get an IOErrorEvent with error code Error #2032

  When I replace new URLRequest (file.nativePath) with URLRequest ("http://.../testfile.mp3"), everything works fine!

  Any help appreciated.

  Is it a question of security settings? Can I change these?

  Something to do with sandboxing (whatever it is)?

  or something to do with cross-domain access?

  I've been looking around for days now and any help would be appreciated!

  I use Flash CS5.5 & AIR 2.7

  Thank you, Marcus.

  Hi Marcus,

  You can try (or maybe you tried):

  var path: String = file.url;

  var req:URLRequest = new URLRequest (path);

  ?

  Kind regards

  Peter

• Flash in the AW sound plays but no picture

  I googled for this but haven't found a definitive answer.
  
  I have a subroutine that plays flash through the flash xtra files. It works well, but for the 3 files in which there was an mp3 player (for the duration of the animation to the sound)-the sound plays fine but I get one image only to the bottom line and it does not play the anim
  
  I tried the same procedure with a sweet lime - just saw the flash xtra and anim of loading inside directly with "Browse...". ', but with the same result. The thin piece of anims from the folder media tey are in, playing in Firefox or IE.
  
  Any suggestions? Using Flash MX, AW 6.5 and Mp3s.
  Thanks in advance
  Helen

  Mike

  Thank you, but I can't work out how to do with ActiveX.

  Have had their re-exported to Flash 6 and it works fine.

  Thanks again to all

  Helen

• iOS 10 alert sounds

  Is there a way to change the sounds of alert for individual applications?  Since the 10 update, all my alerts are the same, so I can't tell if this is a message from my husband's Facebook, or it's my turn to words with friends without looking at my phone.  There are a few options to change alerts, as for sending by e-mail and get a text, but it seems that all other applications are stuck with the same sound.

  Go to settings > sounds and from there you can change various system and app notification sounds.

• Flash air app for IOS. Sound problem

  HI, I made a flash app for IOS. This flash content video. Video of the work correctly in the Simulator. I have the video work´s iPhone, but the sound is not.  Please I need solve this problem as soon as possible. Thank you in advace

  I found the solution with webView.dispose () and his works. Im going to test your solution as well. Thanks for your help

  import flash.geom.Rectangle;

  import flash.media.StageWebView;

  import flash.filesystem.File;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  Stop();

  button_1.addEventListener (MouseEvent.CLICK, fl_ClickToGoToWebPage);

  function fl_ClickToGoToWebPage(event:MouseEvent):void

  {

  var webView:StageWebView = new StageWebView();

  webView.stage = this.stage;

  webView.viewPort = new Rectangle (285,265,640,480);

  var fPath:String = new queue (new File("app:/kk.mp4").nativePath) .url;

  webView.loadURL (f)

  hh.addEventListener (MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame);

  function fl_ClickToGoToAndStopAtFrame(event:MouseEvent):void

  {

  webView.dispose)

  };

  }

• flashes and turns off the video when you play, has sound

  Where to play games online TI juice flashes. I have sound but no video. This also happens when I watch QVC on my computer.

  Hi yesndeed70,

  ·         What version of the operating system is installed on the computer?

  ·         You use Internet Explorer? If so, what version are you using?

  ·         You get the error message?

  Follow these methods.

  Method 1: If you are using Internet Explorer, follow the steps in the article.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  Method 2: To update the drivers to display/graphics.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For reference:

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems