Flash plays don't pitch on the html page after the model is changed

Similar Questions

• Passage to another HTML page after animation finished

  My question in English:

  Hello, Hello,

  I created a Flash with Flash 8 animation and I exported to HTML format.

  I would like to finish the animation, there is an automatic transfer to another page HTML of my choice (for example after xxx seconds), as we have seen in the web (redirect in fact). I would also be able to put a "Skip Intro" link on the page of the animation for people who do not want to wait for the final animation.

  How do this with Flash 8 directly or I write a code inside HTML for this operation.

  Thank you very much for your reply and help

  English of my question:

  Hello

  
  

  I created a Flash with Flash 8 animation and I Exported format of to HTML. I wish that at the end of the animation, at the end of this animation, there is automatic (after x seconds for example) switch to the web page of my choice (a redirect somehow). I would have the possibility in the page containing the animation link "Pass the intro" pay users who do not want to wait for the animation to view my site web.

  
  

  How to pour do this, is it possible directly in the creation of my page en Flash or DO I put a piece of HTML code pour make this transition happen?

  
  

  Thank you pour your response and your help.

  It depends on what version of Actionscript using your file.

  To get an AS2 file, you use getURL() to post a link to a web page.  You can use the setTimeout() function to delay the onset of the call getURL().

  For AS3 you use navigateToURL() to post a link to a web page.  You can use the setTimeout() function or class Timer to delay the triggering of the navigateToURL() call.

  In both cases, you could place the call to the liaison function inside another function that you call either by using delayed calls functions mentioned, or by using a button to call the function to pass the intro.

• Notify the ListView data in the model have changed

  Hello!

  I know this question has been asked several times, but I have yet to find anything satisfactory.

  I have a ListView, filled with a QListDataModel.

  After some time I update an element of the model. So far, the only way I found to the ListView so that this change is to delete the model and then reappend all elements. But the problem with this approach is that ListView Flash and scroll to the top of the page. Is there anything better to just say ListView that it should update the visible elements?

  Thank you

  Well, I just signal myself in the WRITE method and it works.

• Knowing a Classification of a Web application in the model of change?

  Here's my dilemma, and I hope someone can help me.

  I have a web application that can be edited in an area secured by some users. Each element of this web application is ranked or ranked in at least one category and I want the user to be able to select categories when they review the web application in the front, so I use {module_categorylist} and it works fine.

  That is the problem. Each web application is closed when it is added to the system in the admin. When the person will change the web application, they don't have any idea what classification the web application already has. If a person presents the web application and a certain classification is not selected it will remove the ranking of the web application element. All I have to do is if the web application is already classified simply add selected (or selected = "selected") to the list that was generated by{module_categorylist}.

  From what I can tell, this is not currently possible?

  I tried to take a look at {{this | json}} to see if I could find it in liquid but nothing came for categories.

  Is anyway to do this?

  There are reasons, but not the list and change the display - no classification at the moment. BC know his need, but because of these reasons why it is not simple, there is no eta when it will happen, or even if it will happen.

• Document titles in the models for change

  Hi all
  
  I know it must be something I'm missing that is easy - but I can't understand how to change my Document titles in the files using a single model. They cannot be changed in the file, because they are locked into the model. How to unlock the title in the model so that I can make the different Document titles? It must be a easy - I just worked too long today and I'm under a deadline.
  
  Thanks for the help-
  Q

  A well-done model will allow you to edit your document of child page
  titles. The fact that you may not mean that you have not used a well-made
  model. To see what I mean, do-

  Create a new page.
  Use the FILE | Save as template... and give it a name.
  Look at the code - see the editable area around the

• Why not Vista Home Basic or IE8 display images saved in saved, html pages after I change them?

  My system is Vista Home Basic and IE8.
  As an amateur, I often save Web pages with the content I want, then later in offline mode, I change the content of the Web page so that the party I want to keep. Often, the Web page contains an image, and when I want only the part of this picture, I change to delete unwanted parts. For example, I can only wish part of a radio chart.
  Vista Home Basic or IE8 will not display these edited images, jpg and gif. I can only record the image as a bitmap, which Vista Home Basic or IE8 will display, after having been edited.
  I tried to share the image with EVERYONE. I tried to share the webpage with ALL file.
  I don't know if this problem is of Vista Home Basic or IE8, but this IS Microsoft.
  Someone knows a way to solve this problem?
  What is one of the tools Microsoft neutered for the cheap Vista Home Basic?

  The painting seems to be the problem.  I had not heard of this problem with the paint before, but it is possible, that he has always been there.  At least you have a program that gives you a work around for the problem you may need to consider that your standard procedure (since there is no way to uninstall it and reinstall Microsoft Paint on its own to fix everything that could be bad if indeed there is one problem other than a stardard deficit in the program.  It is not a very sophisticated program, after all - but what you try to do should work as far as I know (he just apparently)).

  Maybe you can get more information in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where people who specialize in Vista (like Microsoft Paint) additional programs will be more than happy to help you with your problem (if there is in fact a solution).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• How can I correct facebook so that it will allow me to get the popup "add photos" page after Comcast improved and changed my firefox settings?

  I had to get a new modem from Comcast today and after that only it updated my firefox with a new home page and of the links on my toolbar, both easily removed and fixed. But what I can not understand how to fix my facebook so that I can always download pictures. He came and he said facebook was not reliable (something that I've never met before) and now after several attempts, I can no longer upload photos! I had to * sigh * identify yourself via IE do. I have allowed cookies from facebook and I let jump - get up, so I can't understand what needs to change to make this happen. Any help is greatly appreciated!

  Hello

  One thing, you can try safely without touching any configuration specific and necessary to get a new profileFirefox. You can remove it later.

  Profiles Howto

  Profile Manager

  Files & profile folder

• Music to play on all Flash html pages

  I wonder if there is some sort of script for this. The entire site is done in an html element, but there is a selection of music flash at the bottom of the page of each. They can lower the volume, select a different sound. My problem is that when the user selects from the menu html and the page loads, the music starts early. Is there anyway that any page they select can remember what they have chosen to make flash music guard not recharge in each html page?

  I thought about it! For someone who is looking for something like this. Try using SharedObject.getLocal. You can find some info on this page. http://www.Adobe.com/support/Flash/action_scripts/local_shared_object/local_shared_object0 5 html

• I have Dreamweaver CS6, when I do my .aspx pages are not be being updated the model updates (html are ok).   Any suggegtions?

  When I make a change to the header of my model (using dreamweaver CS6) my .asxp pages are not updated.   Any suggestions as to why this could happen?

  To deepen our questions, we remembered that we had renamed the main level of the aspx pages folder, after that we have applied the model.  Once we have created the new folder in dreamweaver with its respective aspx pages, we were able to apply the model and changes to the model propagated down to the pages as expected.

• form php with html page?

  This is an excerpt from a short form, I would like to put up on my site in HTML single page. It is powered by PHP, and my intention is to insert this form in the footer of the site.

  Can I copy the code for the form and insert in my footer & who would do it? Just change the extension of the file to PHP to support and then make the call PHP at the top of page?

  And, if it becomes too difficult - how could I change the electronic form to HTML only if needed tag?

  < div class = "formblock" >

  < label = "howHeard" class = "text-reader-screen" > how did you hear about this? < / label >

  < select name = "howHeard" id = "howHeard" value = "<?" PHP if (isset($_POST['howHeard'])) echo $_POST ['howHeard'];? ">" class = "tick" >

  < option value = "volvo" > Volvo < / option >

  < option value = "saab" > Saab < / option >

  < option value = "mercedes" > Mercedes < / option >

  < option value = "audi" > Audi < / option >

  < / select >

  <? PHP if ($howHeardError! = ") {? >}

  < br / > < span class = "error" > <? PHP echo $howHeardError;? > < / span >

  <? PHP}? >

  < / div >

  Is it a good idea to make the HTML page in a PHP page? -Thanks!

  Can I copy the code for the form and insert in my footer & who would do it?

  Well, the extract is not form tags, and you will need a script for the treatment, which may be the same "page or another page. You also need a way to send the form.

  Is it a good idea to make the HTML page in a PHP page?

  The server must commit more resources to treat a PHP page, so you don't want to convert HTML pages to PHP pages unless there is code inside PHP. But there is no harm in turn an HTML page in a PHP page.

• How to make an HTML page redirect after 5 seconds

  I'm looking to make a simple HTML redirection page to another HTML page after 6 seconds. How can I go about it?

  Thank you much for the help.

  This should help you:

  http://webdesign.about.com/od/metataglibraries/a/aa080300a.htm

• Dreamweaver 8.  Update of the model does not appear in other pages

  I created a template for my Web site. All pages in the Web site is used. Sometimes when I change the model and save, it queries on save the template and update the pages using the template. Sometimes he asks only to save the model. I just had to model and want the changes to be made in the related pages, but I can't ask him if I want to update the pages. What I am doing wrong? Also is there a way to force all pages that use a model to be rerfreshed from the model? (Changes in the model, I had attended a non editable section). Thank you

  That would certainly do. I would add that, as the means of 8? No - this is the case
  unlikely, I don't think I would! 8)

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "annpmul" wrote in message
  News:ea33q5$Go7$1@forums. Macromedia.com...
  > I found my problem. I was not using the correct model dwt file.

• Liquid layout at fixed disposal of the model? How?

  Hello

  I use a free template to create a site and I started initially with a fixed layout (which I chose) but once I have implemented the model he changed to liquid.

  Any ideas on how to change this back to fixed? I think that it is perhaps due to the files style.css or style - desktop.css.

  Help would be much appreciate,

  Thank you

  1. the min-width CSS property is used to set the minimum width of a specified element. The min-width property always overrides the width followed before or after the width in your statement. This means that the body element will never lower than 1200px but will pass to the same width as the screen if it exceeds the 1200px. If you want a static/fixed width, then you must replace min-width width.

  2. Remove

  Padding: 3em 0 0 0;

  By removing the line, you delete a top padding of 3em or about 48px. The foot has a height of 40px (2x15px padding + height of 10px text) and the rest is hidden.

  3. you must understand the difference between the ID's and class in reality it comes down to the fact that a class does everything that made one ID. A CLASS has the additional advantage that it can be used multiple times in a document. ID's are often used when a unique identifier is required.

  Just to help you understand, a fixed provision requires a fixed-width value. No min width no percentage, just a width in pixels. A fixed width paper won't be better between the different screen sizes. You will need a responsive and fluid design to do.

• Changes made to the model no is not in the region to change

  I created a model - 3 tables - the table top and bottom is NOT editable regions. The Middle table IS in an editable region. On the model, I've changed the table in the middle region - change the background color, remove a cell, added a placeholder image, etc.. Also on the model I made changes to the tables up and down. When I saved the model, he asked if I wanted to change all the pages that use this template - I said yes. But only changes to the sections NOT in the update of editable!
  
  Sidenote: I took a Dreamweaver class in August 2006 (fab!), but went and had a baby and am now FINALLY sit down to develop a few new sites. Before that, I was a self-taught FrontPage user (ugh). Point is: I am a novice user of Dreamweaver (and rusty no less!) so forgive me if I'm missing something REAL basic here!

  The game, June 28, 2007 19:48:12 + 0000 (UTC), "Datanomics.
  wrote:

  > It's not defeat at the point of the template...? If I create 20 pages in function of the
  > on a model and then decide to change the color of a table that is in a
  > editable area so I have to go to 20 pages to change that
  > table...?

  No, change the EDITABLE regions in the child pages would go against the
  point of a model.

  Look at it this way. The model manages all the stuff that are NOT
  in the editable regions. You put the header of the site, the footer, navigation,
  Sidebar, all that does not change, in the areas that are NOT
  editable.

  The editable region is sitting as a container on each page of the child hold the
  things that are unique to the page.

  If you have changed this container in the model and change
  propagated down to the child pages, you would immediately and
  permanently LOSE ALL YOUR UNIQUE PAGE CONTENT.

  However, if you use CSS for any style, then everything you want
  have to do is change the color in the CSS file - and anywhere
  the targeted piece is, it should reflect the change.

  Win
  --
  Day of Win, Wild Rose websites
  http://www.wildrosewebsites.com
  [email protected]
  Skype winifredday

• I get the blue screen of death whenever I try to play a video - regardless of the source (you tube or CNN). Instant death! I tried to reinstall Adobe Flash player. Any help would be appreciated, if not his return to IE...

  Blue death screen / system crash when you try to play the video or to copy an image from the internet

  On further study, please do not go on the road to perdition as I trod.

  However, to do this: go to http://www.adobe.com/software/flash/about/ and right CLICK on the logo that is being charged. THEN: Navigate down until "settings", click it, and you should have the choice: "disable hardware acceleration". NOTE: If you do NOT have this choice, study the icons down quickly: on MY screen, the left-most is an icon that looks like a video monitor: click on it and give you the opportunity to "disable hardware acceleration".

  It works, if you can get it done before you get a BSOD! AND do not take the life of your computer in your hands by updating your video drivers. I do not really recommend doing that!