FMR and making it partly interactive with buttons

Similar Questions

• Cannot communicate with friends through imvu and want to keep interacting with them

  I have an account with imvu and I made a lot of friends out there I'd love to continue to keep inter action with them plaese help me.

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://www.IMVU.com/catalog/modules.php?op=modload&name=phpBB2&file=index.php

  It will be useful.

• How to treat you with button interrupts on the 537 ez - lite

  Sorry for the newbee question, but I'm just familiar with the jury of 537 ex - lite.  I want to use the buttons to cause an interruption and then this interruption with a service code.  What I have to write a separate VI to handle the interrupt, or I can put it in a structure of the event in the vi that I write...?  Finally, I would like to be able to write an event-driven state machine in the fins... In the attachment, I can button scan and as he lights a led, but I would use the interrupt enable and get the number of the button as an event / box pair to do the same thing... How?

  Thanks for your suggestions.

  Hummer1

  Hummer1,

  The call library function Node (COLD LAKE) that is configured to run with the dll works with features that sees what button was pushed on the BF537. You can double-click that and see what dll it points to and what function it interacts with. Since the deployment of resources target shipped you will have to compile the code LV, in C and machine code using a 3rd part of the compiler is just to do the work of generating C for you. You could probably accumulate the feature yourself using just the screw provided but endearing tape in these support libraries is better because you do not have to reinvent the wheel and lots of screws that you would end up with are actually just wrappers for other DLLs.

• Interact with the user interface components

  I'm trying to find a GOOD way to interact with the external classes user interface components. For example, that you have a 'controller' class that needs to access the view of the user interface in some way (define a label text or something else). The controller class does not do anything, it discusses only the logic of what should be the case. Currently, it is created by my top-level class when the program starts. He listens to some events occur and needs to update/interact with the user interface or the State of the application depending on what events are. I do not seem to be a way for this controller class to easily access the UI component that I need to get my hands on.
  
  I'm trying to do to reduce the size of a file of mxml WindowedApplication growing (LOOK cool but that is not important) and take part of the logic of the application of this file.
  
  It's complicated by the fact that the label is in a State that does not have the status of 'base' (so it is not a child, or even a subsidiary child of the main class at boot time) and by the fact that it is not yet near a high school component. (If that were the case, I could probably just pass the label object in the constructor for the outdoor classroom.)
  
  In other words, I can't just call getChild ("labelName") on my 'main' request object because it is buried nested inside OTHER components. I don't think I like the idea to browse all components and sous-composants recursively looking for the component that my outer class trying to ask. I thought about other ideas, but I don't like any of them enough to try them, eh.
  
  I'm at the point now about where I come to the conclusion that my fundamental design strategy is wrong, or Flex just not allowing complex applications where the GUI components can interact with external classes relatively pain-free. I'm not convinced that "Flex cannot do', I'm looking for advice on some great Flex application in all design patterns.
  
  Where do you put this kind of control logic, and what happens when it starts to overflow and become so large that you need to break in other files?

  Found a solution, I think that's what I've been looking for:

  http://labs.Adobe.com/wiki/index.php/Cairngorm

• My speakers and microphone are in interaction causing a high pitch sound

  Whenever I use Skype my microphone and speakers are in interaction with a sharp Summit sound makes it difficult for me to converse with friends.

  Ask http://forum.skype.com/

• flash button to interact with the object to 3Dpdf

  Hello

  Here is my project, I built a menu with different buttons. SWF in my 3D window to interact with my 3D object.

  With this button, I want to play an animation, a changerendermode, play a video on a 3D etc. face and many other functions that are in a file. JS

  For more information, I begin in actionscript.

  I read on the internet that we must use the 'ExternalInterface.call("saveglobalscore",score) '.

  Here's what I put in my flash button

  function anim (pEvt: Event): void

  {

  ExternalInterface.call("saveglobalscore",score) ("changeRenderModeillustration");

  }

  btn_anim.addEventListener (MouseEvent.CLICK, anim);

  But nothing happens in my 3D window while my function does not appear in my. JS

  I don't understand what the problem is!

  Thank you very much for your help!

  The SWF file is send commands to the document, not to the JavaScript file that you attached to the 3D annotation. See my previous answer on the creation of a function at the level of the document.

  I don't have an example of the FlashEventHandler system that I can share this moment, we will soon have a tutorial about it, but we are working on some things behind the scenes first.

  I made a tutorial in two parts in the Acrobat 9 days which covers how Flash can be used in the 3D scenes as a material and the same general concepts on ACE<>JS communication discuss in part 2 applies when the SWF file is a foreground sprite (the 3D API has not changed in the X version):

  http://acrobatusers.com/tutorials/using-Flash-3D-material-part-2-2

• The iexplore.exe program ceased to interact with Windows and was closed

  The version of iexplore.exe 9.0.8112.16447 program ceased to interact with Windows and was closed

  This happens from time to time only.

  Hello

  Follow these methods.

  Method 1: I suggest that scan you Chccker file system (CFS) on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:  If Internet Explorer does not work, you can try to disable Internet Explorer and then enable the feature that is as good as the uninstall and put it back.

  Follow the steps below to do the same.

  To enable or disable the Internet Explorer, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. uncheck Internet Explorer. Click OK and restart the computer.

  c. now follow the same steps to activate Internet Explorer by selecting the checkbox.

  Access the link for more information on the above steps to turn off or on the features of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• I want to buy the first pro and Photoshop.  How does it interact with creative cloud?  How much will cost me to buy all 3?

  I want to buy the first pro and Photoshop.  How does it interact with creative cloud?  How much will cost me to buy all 3?

  Hello

  Please visit:-Creative Cloud price and membership plans | Adobe Creative Cloud

  First pro and Photoshop are a part of the creative cloud, but you can buy them separately as well.

  Photoshop and Lightroom for $9.99 / month

  Add any unique application just for $19.99 / month

  And all the creative cloud just for $49.99 / month.

  This includes applications such as:-officeAdobe Creative Cloud | Adobe Creative Cloud

• Multithreading and interactions with instruments

  I have to start by saying that I'm not a great programmer. I build an instrument that requires a computer interface, and I learned how to program at the time of writing the program, for most documentation work (which means I have re-written program one half package of time I learned new things like how to define data structures and so on).

  My question is about multithreading - in my application, I use the GUI to write a series of instructions, and then I press a "Start button" which loads the instructions on a Board that interprets and outputs some call digital logic by the precisely. In addition, if specified, the button 'start' begins a task DAQmx that takes a trigger of my Board and acquires data. As these scans can take a long time, it is better for me to run in a separate thread. I also try to run an additional thread that queries the Board of Directors for its status - if it is running, waiting for a trigger or stop - and updates a control LED to reflect the State periodically. The problem I have is that programming function, the Board of Directors and the audit of the State function has some overlap, which I imagine is the reason why I'm the General Protection faults.  I read on the Thread hangs and Thread-Safe queues, but those who seem to be especially on the transmission of data between threads. Ideally I would be able to make sure that two threads do not call the same function at the same time - how would implement this?

  In addition, I don't know if it is a problem of the two threads calling the same function at the same time (I dunno if it of a problem or not), or if the problem is the fact that when I call these functions, they need to access the USB interface and there may be some sort of conflict between them.  I'm really hitting a wall here because I think that I don't have a solid understanding of the operation of allocation memory and battery function.

  Hi Paul, from your description, it seems very likely that you have problems with contemporary access to the same resource from multiple threads, which could explain the GPF you receive.

  Thread locks are a common way to handle such situations, because they can allow a single thread to protect it from another thread any access to the shared resource.

  Locks are used is:

  1 create a lock before you need to use it (possibly at the start of the program)

  2. when a thread needs to access the USB port to communicate with the instrument, it must call CmtGetLock to block access from other threads: If the lock is free, it is acquired by the threads. If it is already owned by another thread, the thread waits on the CmtGetLock until the bolt is free

  3. once a lock is finished using the shared resource, it must call CmtReleaseLock to permitt the access to the resource from other threads

  4. at the end of the program, destroy the lock

  If you do not want to stay frozen in CmtGetLock of a thread there is a function in the library if the lock is free or not, so that you can stay in a loop waiting for the lock to be free, but with the wire still alive and able to continue its work (still without access to the shared resource (, of course).

  It is crucial that acquired locks are always released, otherwise the other threads will be permanently excluded from access to the shared resource: this review is particularly important when adding threads management, because you must be sure to release locks acquired even errors, when a policy of the commune is to jump to a label inside the error handling function and it is possible that a lock is held acquired errors.

• How can I interact with mainvis and subvis without closing any of them?

  I have a mainVI which opens a Subvi perfectly and I m using the "VI Open reference' & the 'node of reference VI to call' to run the Subvi. However, once I open the Subvi and it s running, I can´t do something with the mainVI. The only way to interact with the mainVI new it s closing the Subvi, I want Don t that happens because I need the two work together and interact with both at the same time.

  Is someone can help me?

  Thank you

  Make sure that the property of Subvi is not floating or modalvalue.

  (Properties of VI... appearance of windows...... customize the behavior of windows)

• I want to join LinkedIn and become a part of them, but to do that I have to share some things or information with them and someone ias which prevents me from doing this!

  Why someone stop me from joining thiws people? I want to be part of linked-in.com and I was for a while and I had a hard time with my writing and need to stop talking with them for a while, sorry about my spelling may be a little off tonight because my doctors have me on some serious drugs that they believe can help find out if I have cancer in my body , so please forgive me if I make mistakes. I'm honestly on this operation on an object.

  Hello

  It seems that you need to contact and work with the support of LinkedIn.

  LinkedIn - Contact us - help center
  https://help.LinkedIn.com/app/home/ls/1208%2C1226%2C2340%2C6003

  LinkedIn - Help Center
  https://help.LinkedIn.com/app/answers/list/LS/265%2C279%2C337%2C641

  LinkedIn - Customer Service
  http://contacthelp.com/directory/Internet/Web+sites/LinkedIn?ListingID=348

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When you try to open some sites Web my computer crashes and I get a message "a problem caused this program blocking interact with windows.

  Hello

  From time to time, I'm having a problem with internet access - when, finally, access is allowed and trying to open some websides my computer crashes and I get a message "a problem caused this program blocking interact with windows ' why?
  I'm not technically capable, but I did I tried different ways-nothing doesn't. I want to talk about Windows 7 Edition home premium.
  At the same time, there is no problem on my laptop which runs under Win XP and with the same internet provider! Any suggestion will be appreciated

  Original title: problems with Win7 and MozillaFirefox

  Hi Ulica,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing an Internet problem on the Windows 7 operating system.

  It would be great if you can answer these questions to help you further.

  1. is the question confined with Mozilla Firefox?

  2 are you able to access the same Web site using Internet Explorer?

  3. have you made changes on the computer before this problem?

  4 are you facing this problem while accessing the secure Web site?

  Problem with Internet Explorer, I would suggest trying the following methods and check.

  Method 1:

  I suggest you add this particular website as a trusted site and check.

  To add a Web site to a security zone: http://windows.microsoft.com/en-US/windows7/Security-zones-adding-or-removing-websites

  Method 2:

  I suggest you to see the steps in the following Microsoft article and check.

  Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897

  You cannot connect to or connect to secure in Internet Explorer Web sites: http://support.microsoft.com/kb/813444

  Why can't I view some websites? http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-view-some-websites

  Note: There are rather than Internet Explorer 9 as well.

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 3:

  Internet Explorer not responding, stops working, or restarts: http://support.microsoft.com/gp/PC_IE_EnvManualID

  Note: If the question is limited only with Mozilla Firefox, I suggest you to post the same question in the Mozilla Firefox's Support Forums.

  http://support.Mozilla.org/en-us/questions

  Hope that the information provided is useful.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• How to configure Windows 7 to interact with utube and games

  My computer is connected to the Internet with a cable modem. It's fast (12 GB) but keeps crashing, Win 7 64 bit pro, always points to my network is not the correct value. I don't understand networks and want to interact with utube and games that my son plays. Why it is so difficult for some people. Sometimes he will lose the connection and I'll reset the modem and restart the computer. Once that does'nt work and I restore to an earlier date that works for most but on occasion it does'nt. I always clean the file temp leaving important cookies according to me. I check the amount of disk fragmintation. I have accumulated a schedualed check disk at startup. I use the Action Center to check the Mechs of connections, the home group and others. It's hard for me to understand, and I really wish I did, but right now, it's hard for me to kiss. I don't want a homegroup, I don't want a network. I finished downloading so many things about cadre4 net for 64-bit and stuff with server attachment. I wish that all this could be simple. I use to think I was smart and pretty intuative. No not so much these days. Also, I got time warner involeded supplier to the point of their coming, then finally say it was my setup, not the implementation.  Thank you for reading this and any help would be wonderful.  Thanks and best wishes for the new year.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question.

  I suggest you perform the steps described in the article:

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
   
  See also:
   
  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance
   
   
  Hope this information helps. Please reply back with the State so that we can help you.

• Difficulty in interacting with the Web site with Windows 8 and touchscreen

  I am trying to interact with a website (www.khanacademy.com) to work on my math skills and I meet a lot of frustration.

  One of the things that Khan fact is that it is an interactive learning site, but when I try to interact with the notebook on the Web site through my touch screen it's just little dots. Also when I try to select and drag a shape to rearrange in a group I can move the form around a 1/4 inch and then the age of the web moves as I tried to move the page. And if I try to double-click the form it zooms in on the page.

  Can someone help me with this? I really need to be able to work on my math stuff, and one of the reasons for which I received a computer with a touchscreen was if I could interact with this type of websites.

  I want to x 360 HP TouchSmart running Windows 8.1

  Altogether.  Khan must references these two pages to find out how to program their site correctly:

  Setting the touch-action property

  Prepare your site contact

  Guidelines for the construction of touch-friendly Web sites

• The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed

  Original title: can someone please help me Dell can not... The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed.

  Here is what I get when I try to download the Dell digital program.  I also can't use it either on the site to check my phone and nobody at Dell know what to do...

  The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed. To see if there is more information about the problem, check the history of the problem in the control panel of the center of the Action.

  Process ID: cd8

  Start time: 01ce962cbf318c8a

  The termination time: 10

  Application path: C:\Windows\ImmersiveControlPanel\SystemSettings.exe

  Report ID: f1125230-0221-11e3-be6b-84a6c8d081a7

  Failed package name: windows.immersivecontrolpanel_6.2.0.0_neutral_neutral_cw5n1h2txyewy

  Flaws in the application related to a package ID: microsoft.windows.immersivecontrolpanel

   

   

  my laptop did not work properly since I got back from dell.  I also can't do a refresh of ore a reinstall then please to do not recommend do not.  I tried a clean to stall the disc, nothing... Help me please.

  Malinda

  Malinda,

  Try to create a media disc by following the steps in http://windows.microsoft.com/en-us/windows-8/create-reset-refresh-media

  If the problem persists, try to perform a refresh and check if that helps.

  Note: The applications that came with your PC or you installed on Windows Store will be reinstalled, but all the apps you have installed other Web sites and DVD is deleted. Windows puts a list of applications on your desktop after you refresh your PC.

  Let us know the results.