folder shared between the administrator and guest user

Similar Questions

• How to disable the sharing of files between the host and guest XP PRO?

  Hello my setup is:

  Host of XP PRO and XP PRO comments using NAT.

  How to disable file sharing between the host and guest (do not want to view or access the file share on host comments)?

  In the comments

  I tried to disable simple file sharing in folder options and uninstall

  File sharing and printing of LAN properties but can always see and have access to the

  Organizing actions of folder...

  Help please!

  Then you will need to disable "Microsoft File and Printer sharing" or you need to set restrictions with the GPO. As long as the systems have their default values the value of a Microsoft network allows to use actions.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• Difference between the administrator and built-in Administrator

  What are the differences between the administrator and built in Administrator?

  Built in Administrator account has all of the control of the computer, UAC does not run when you run the built-in Administrator account.

  But in the standard Admin account, User Account control is running.

  In windows 7 and later versions built in admin account exists, but is disabled.

  It will be useful.

• I have a problem with the guest account, defined as the administrator and other users as standard.

  Original title: "Guest account" is defined as an administrator and other users are standard. Unable to create new accounts or edit the ranks.

  Hello.
  I have a Dell INSPIRON 1545
  Windows 7 Home Premium

  Somehow my "guest" account that you can toggle is administrator.
  my other 'Ordinary' user is a standard user and I can't do the promotion.
  Because this "guest" account is Administrator I can't ' create new accounts / change accounts / disable comments / CMD refuse orders. "
  "I don't have the"windows drive"so there is no need to restore my windows / safe mode does not help either.

  I read a thousand threats and issues on this topic but nothing helped me.

  Help, please!

  to be honest I don't know if the administrator account is enabled.

  You have fallen into a popular trap, the trap of not plan and create an alternative emergency admin account, even if you have a spare emergency House key. It's now cause you a lot of grief. If the problem occurred recently, then you can resolve as follows:

  1. Use your repair Windows CD to start the machine in Repair Mode.
  2. Invoke the system restore to configure Windows to a point before the problem occurred.
  3. Plan in advance and create, test, and document this absolutely essential spare admin account.

  If this does not work then send me a note (pegasusDOTfnlATgmailDOTcom).

• Workstation 9 - slow network performance between the host and guest

  I am running windows 8 on the host and installed by 9 trial. Then installed windows 8.1 as a comment system.

  I'm a slow, very slow network between the two.

  If I send files to and from the computer with another guest, transfers are normal, but if I try the same files between the host and the guest, they are really slow.

  I use a bridge connection.

  I read elseware to disable the following on the guest card:

  Large Send Offload v2 (IPv4)

  Large Send Offload v2 (IPv6)

  But that did not help.

  Thoughts?

  Maybe then try Hyper-v, it help you better.

  report this incident to Vmware if you can

  Concerning

• Sharing between the office and cell phones driver

  How to share a driver (with data files) from the desktop (Windows 7 Home Premium) with a laptop (window Vista Home Basic) through a router?

  Hello little bb,.

  A quick correction: you mean in car no driver.  A road is a place of storage for files, a driver is a program that communicates with the hardware (printers, cameras, scanners and the mouse have a drivers for example).

  In any case, to share your car from the desktop to a laptop computer, there are several choices.  This tutorial on this page provides an excellent walkthrough.

  However, an easier method is to use the "Homegroup".  Since the first computer, open your Start menu and type "homegroup" to find the option to create a home group.  Once created, you can do the same from the laptop to join the home group.  Once completed, the two computers will see each other and you will see a new folder 'group' on the left side of your file Explorer that allows you to access shared drives on the other computer.

• Difficulty ping between the hosts and guests

  Hello

  I want to establish network connectivity between my host OS (XPsp3) and my guests (CentOS5.5 and Windows 7).

  So far, I can ping between guests, but not between host and guest, or comments to the host.  When I try, I get a message "destination host unreachable".

  When I configured my virtual machines in a first time, I put them to 'Host-Only' and I need to keep it like that for the purpose of what I do with them - which is the problem?

  Ipconfig and ifconfig outs of machines attached.

  Bests

  Adam

  ... If you use VMware Workstation, you could also reconfigure VMnet1 in the 192.168. 8.x subnet using the "Virtual Network Editor"

  André

• Persistence, shared between the EJB and WAR projects

  Hello
  
  I created an Enterprise Application in netbeans which an EJB project and archive web. This can be expanded further at a later date by the presence of a client application as well. I'm still pretty new to this so you don't have to forgive me if it is a simple problem. I have a persistence unit (persistence.xml) that I need to share between the two WAR and EJB, but so far, does not feel very lucky. I have read the various responses and they say I should have the EAR that is constructed in the following way:
  
  Project.ear
  =======
  META-INF/MANIFEST. MF
  lib/Persistence.jar
  -> META-INF
  -> META-INF/persistence.xml
  project - ejb.jar
  project - war.war
  
  When I try to compile, if I get the following messages among two EE modules:
  
  Note: The XML persistence [META-INF/persistence.xml] has not been found. NO GENERATION will occur! Please ensure that a persistence XML is available either from the directory CLASS_OUTPUT [META-INF/persistence.xml] or by using the eclipselink.persistencexml property to specify its location.
  
  I tried to copy the persistence.xml in the META-INF directory in the EAR file and defining the eclipselink.persistencexml=META-INF/persistence.xml, but it still shows the same thing. Is this a classpath problem or is something else wrong?
  
  Thank you very much

  The EAR is a good idea, but you put the META-INF/persistence.xml in your ejb module. The EJB is where you do all your (managed container) transactional stuff, so do call in your EJB since the WAR instead of trying to share a persistence between modules unit.

• I myself put in place as long as the administrator and am the only user, but my wife's name is still on display in the user records

  original title: problem strange user

  Hello people out there... My problem is that I got on the computer of my wife which is a HP Pavilion with Vista home Premium. I myself put in place as long as the administrator and am the only user... However my wife's name still shows under the user folders, i.e. 'C:\User\jenny '. I went to the sections of the user to delete, but it does not appear, it shows me only... also when I try to delete the folder of the user, the delete option wonder if I want to delete my account... My folder is located on the right of the Start button with more programs from the main menu, but my wife is located under the main C: drive I obviously did something wrong when I set up my user account, but I have no idea... so if anyone of you people can help me, I would be very grateful... Thank you.

  If you change the name of an account, the name of the associated in C:\Users folder does not change. As far as I know, there is no way to change this.

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• I can't connect to my user profile. I am the administrator and cannot connect

  original title: problems with user profile

  I can't connect to my user profile. I am the administrator and can not connect at all.  password has not been changed.

  I can't connect to my user profile. I am the administrator and can not connect at all.  password has not been changed.

  What is the FULL error message?
  This one? .... Cannot load the user profile and the user profile service does not log

  If Yes, read on...
  You have another admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Port sharing ethernet physycal between the Mavericks and Ubuntu using VMware Fusion

  Hi all

  I use VMware Fusion on Mac OS Mavericks 6.0.2, and I need to connect a physical device to manage using a Ubuntu 12.04 VM. In addition, the host computer is connected to a public network, using a Wi - Fi connection.

  I put the ip of the physical device by USB configuration, but I was unable to get by using ethernet or the guest or the host computer. I tried to configure the NIC of the NAT guest, as well as the bridge too. Nothing seems to work. I don't know if the virtual machine is able to handle the physical Ethernet port.

  Ideas for the configuration of the network device (NAT, bridget, etc.) or the ip configuration?

  Thank you very much in advance.

  Sorry, I left an important step.  You must also configure the host's Ethernet card to use a manual IP address in the same subnet assigned to the Virtual Machine and the sensor.

  1. connect sensor card via USB and set the IP address and subnet mask, disconnect USB.

  2. connect the sensor to the host (Mac) Port Ethernet card.

  3. in the Apple menu > Preferences system... > network > Ethernet > configure IPv4: manually, then set the IP address: and the subnet mask: properly.

  4. from the Virtual Machine settings > network adapter > Bridged Networking > Ethernet

  5. in the guest OS virtual machine to set manually the appropriate IP address and subnet mask.

  Example:

  The IP address of the host on the Ethernet adapter: 192.168.3.1 subnet mask: 255.255.255.0

  Guest OS Ethernet adapter IP address: 192.168.3.2, subnet mask: 255.255.255.0

  Sensor onboard IP address of the Ethernet card: 192.168.3.3, subnet mask: 255.255.255.0

  In this example, the sensor Council will be addressable by the host or the guest to 192.168.3.3.

  BTW I just tested it using my Thunderbolt Display Ethernet with a normal cable (straight not crossed) RJ45 connected directly to a device addressable IP, VMware Fusion and a virtual Windows machine.  Although the same works with an Ubuntu VM as I have in the past also.

  This should work without any problem but make sure that the firewall or other security software on the host and guest are not blocking communications!

• Files & folder sharing between XP, Vista, Seven with password protected

  How to share files or folder between XP, Vista & seven... must password protected
  My vista and my friend seven sharing very well, is password protected and I would like to add another XP at the center network and sharing as well, but I find the xp you have a problem, it can make sharing with vista & seven only without password protected and I would like to know how can I do with password protected sharing.
  Below are done on xp:
  1. install the update kb922120
  2.secpol.msc-> authentication security LAN network manager set to send LM & NTLMv2 - use NTLMv2 session security if negotiated.
  Using Xp to Vista to access, seven a shared folder, no problem, while the password protected is located next
  Using XP to Vista, the folder shared seven, the access you have problem while the password is defined on
  It show no permission, but suppose that displays the prompt for credentials...

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory. MS - MVP - Elephant Boy computers - don't panic!

• authentication between the ACS and AD

  Hello

  I would like to know what kind of authentication mechanism ACS 5.1 use to speak with Active Directory. Does simply use MSCHAP, MSCHAPv2 or PAP. By default, it uses PAP to talk between the Cisco IOS and the AEC on the 5.1.

  If you llook at the default admin tab and click on allowed protocols---> he mentions PAP.

  Should I use a safe means of transport between the ACS and AD. IDF, so anyone can say the authentication mechanism?

  Thank you

  Any meeting of directors like telnet, ssh and comfort they always use PAP as an authentication method.

  Although communication pap can be captured and read in this case in clear text. However, since we have Ganymede in use, he always encrypt the whole package with shared secret defined on the IOS and ACS/GANYMEDE so if you capture traffic between the radius and the device you won't be able to decipher it without the key.

  In case you have Ray then using SSH (Putty) so that it can help you for a safe communication.

  ACS and AD support PAP, CHAP, MSCHAPv1 and MSCHAPv2.

  However, the administration does not work on another method of authentication except PAP.

  HTH

  Regds,

  Jousset

  Note the useful posts ~