For another interface ISDN Bri ISDN bri backup

This is probably a stupid question

But if you wanted to save an ISDN Bri ink with ISDN another link what would be the best way to go about this?

Thanks in anticipation!

I think that practically all the variants that are normally considered to establish the backup of an interface are possible:

-backup interface would work. The normal warnings on the impact of the backup interface apply. If, in doing so, it may be preferable to backup on a dialer that interface return upward at the IRB.

-floating static routes might work. The challenge with floating static routes is that primary BRI is not likely to go the Protocol which is what triggers usually floating static. So to work around this problem, you want to use the new feature of reliable static routes with the purpose of follow-up.

-Watch Dialer would work. I woule think this might be the best choice in your situation.

-If you use OSPF as your routing protocol configuring ISDN as Circuit request would probably be a reasonable way to get the second ISDN to back up the primary.

Decide which option is best depends on your particular situation that are actually needs. I don't think that it is possible to give a general answer that would cover all cases.

HTH

Rick

Tags: Cisco Network

Similar Questions

  • Vista Backup keeps asking for another disc

    Greetings.  I have a desktop HP with Vista Home Premium. I'm backing up files using the restore backup center &. The wizard opens and I put in the first disk and all right. When the first disk is full I have invites to second drive and mark 2...  I do, and the backup starts to run again, but any time I get ready to put in the disc 3.  It using my computer shows existing in drive E as partially drive full. I put in a 3rd disc and even don't thing only a part of the new drive filling before you ask me for another.  I used different brands of media with different types: DVD-R, DVD - RW, CD without help. I would be grateful for any guidance to correct this problem.  Thank you in advance...

    Hello

    This is a forum for microsoft at the link specifically for backup questions below

    http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  • Can also interface with VPN remote site also for another use?

    Hi all

    An interface used for the remote site VPN on PIX can be used for another function, for example for the smtp server and web publishing?

    Thank you!

    Best regards

    Teru Lei

    Yes! of course you can. Just try it.

    --

    Alexis Fidalgo

    Systems engineer

    AT & T Argentina

  • ZTE open c. keyboard for another language. and lockscreen wallpaper

    Must say, this is a huge improvement from the Open original.

    Now, can someone tell me where to find the keyboard for another language, and where can I change backgroubd for lock screen?

    Thank you

    The first lock, the Lockscreen wallpaper is the same as the desktop wallpaper. After unlock the screen and close it, the Lockscreen wallpaper is the default wallpaper. The wallpaper is always the same.

    It's a known version 1.3 bug https://bugzilla.mozilla.org/show_bug.cgi?id=1034936 (default version on ZTE C OPEN)

  • Re: Can I extend the extended warranty for another year?

    I had already purchased an extended warranty on the A660 machine purchase. I can extend it for another year?

    Thanks :)

    I think it depends on the laptop model.

    The Toshiba warranty extension where you could buy such warranty service, you should visit.
    http://www.Toshiba.EU/services/warranty-extension/

  • To change the Satellite A300 - 1 G 5 for another similar model

    I started using the Satellite A300 - 1 G 5 in October 2008. I liked its sleek black design perfect, but his memory crashed. The service center offers to change my laptop for another with the same characteristics. But I put t know which one to choose. I would, of course, Toshiba.

    I will be grateful to everyone

    If you want to have the Satellite A300 once again I recommend to use the model of PSAG8E. I have more than a year now and I'm really happy with it.
    If you have the opportunity to take other, more recent, portable check new Satellite A500. I like it.
    There are 16 display, refined design and wonderful backlit keyboard.

    If you have Facebook photos under http://www.facebook.com/group.php?v=photos&gid=217815444376

    You want to have A300 again?

  • I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

    I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

    Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

  • Pavilion 9408nr: Add a second drive for another main drive for laptops

    How can I add a second drive for another main drive of laptop computers. I took the car on the same cell type that crashed by the motherboard. I put it in drive Bay 2. Problems with starting. I sometimes want to boot from disc 2. Is there a MBR somewhere? Are there jumpers to make it slave. Sometimes it will install the software on 2 without any question. Is there a way to make a slave?

    Important-copy all data on the second hard drive you want to save on the first hard drive.

    MBR of Windows with the hard drive. Use Windows Explorer to locate the second hard drive. Right-click on it and format it.  Once this done, all what one is a storage device and not bootable until the operating system is installed to it.

    The BIOS will only see the hard drive as a bootable as it will now be the only drive with a MBR boot sector.

    The days of placement of the jumpers to determine master or slave on the disks hard is long gone. SATA drives have no jumpers slave\master like the old school IDE and Eide did.

  • Windows backup for maintenance, will not perform a full backup.

    Original title: BACKUP WINDOWS FOR MAINTENANCE

    Why don't my backup to a blank disc or an external hard drive?

    Hello

    ·         What operating system do you use?

    ·         You get the error message?

    ·         Windows backup that you are using?

    ·         Are you able to perform a backup to internal hard drive?

    ·         Were there any changes made on the computer before the show?

    Follow these methods and check if that helps:

     

    Method 1:

    You can try to clean boot in order to check whether a third-party software is causing a problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.
    http://support.Microsoft.com/kb/929135

    Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

    Method 2:

    You can try temporarily turning on all security software and then try the updates again.

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3:

    I also suggest to follow the troubleshooting steps form the article and check if that helps.

     

    0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

    http://support.Microsoft.com/kb/979281

  • HP 8500 will be analyzed with a computer running Windows 7 and not for another.

    HP 8500 will be touring with one of my computers running windows 7 and does not scan for another, once connected USB and both running windows 7 family. I reinstalled the drivers on the second computer, nothing is done.

    The error says it can not connect, however the print function works. The HP utility "fix" would also not work.

    The second computer is windows 7 64 bit.

    The solution you provided worked. Thank you. I have it plugged into USB 3.0 causing the computer communicate only not with the scanner. Thank you very much. I really apreciate your help. Have a great day!

  • Foglight Custom monitors for all Interfaces

    I am trying to create a custom desktop for the OID 1.3.6.1.2.1.2.2.1.8 - ifOperStatus for all interfaces. I created the custom monitor successfully, but when I go to apply, Foglight makes me choose only a single subset (aka Interface)? I must add this manually for everysingle interface? I also want to add this monitor for a group of Force10 switches, so more than 500 interfaces...

    Hi Jim,.

    That's right: you need to add the client once policy monitor for each interface you want to monitor. We do not support a table of results of a custom monitor.

    I had my PM team to see if we can add this as an enhancement request.

  • Lock the orientation of the display against instructions for user interface?

    Hello
    I am new to this forum and I want to say hello to everyone here.

    I have developed some simple games using Marmalade fast during the Marmalade for BlackBerry 10 Port-o-thon and obtained their release denied because of problems when switching of modes of orientation.

    Because of the beta status of 6.2 of Marmalade and jam quick, I would rather stay with on BB10 portrait and landscape on the Playbook.

    Can I lock orientation and get my apps aproved or is it against the instructions for user interface?

    Concerning

    It is absolutely perfect lock orientation for applications. Go ahead, orientation of the lock and submit. You shouldn't have any problems.

  • WS-C3750G-12 s with c3750-ipservicesk9 - mz.122 - 53.SE2 will not apply for route interface map VLAN

    I'm not able to implement a roadmap for an interface VLAN on this three switch layer.

    Switch:

    WS-C3750G-12 S

    IOS:

    C3750-ipservicesk9 - mz.122 - 53.SE2

    Route map Config:

    access-list 151 allow the host ip 10.1.0.11 everything

    !

    TEST allowed 10 route map

    corresponds to the IP 151

    set ip jump following x.x.x.x (Public IP)

    Used command.

    interface VLAN2

    IP route-matches of TEST strategies

    I also do a show run all | I have the interface Vlan 2 and there is no config hidden for this too.  Does not support this version of IOS.

    I suspect it's because your other switches in the stack are not 3750-12s switch?

    3750-12s switch running the model of aggregation by default but all other 3750 s cannot run office model.

    Then on the master can try this-

    "sdm prefer routing Office."

    and then charge again.

    Jon

  • Portable Acrobat license for another OS?

    I bought a license of Acrobat for Mac.

    Since my Mac, will be the port Windows license for free?

    only the recent versions, a product of Adobe for another language or version of trading platform

  • Is it possible for first Pro CC hide the automatic backup window

    Is it possible for first Pro CC hide the automatic backup window, without turning off autosave function?

    When such a device is save you wonder why you wouldn't be able to do everything that is the case in the car.

    I'm guessing you want automatic backup in the background?

Maybe you are looking for