Formatting CD - R under Windows 7 Professional

Similar Questions

• Majority of the graphics are missing from the HTML version: HR 10 [10.0.1.292] under Windows 7 Professional, SP1

  Hello world

  I am really frustrated right now and am ready to throw HR by the window. I use HR 10 [10.0.1.292] under Windows 7 Professional with SP1 and 16 GB of RAM. There has been no major changes to my computer other than standards fixes/updates to date which are systematically pushed down for us to work. I have not installed new software.

  I worked on the same project file for the last 6-9 months and more. I have not changed directories. I have not changed the file names. I have not changed computers. My construction of the 25 September 2015 (which was our most recent product version) looked and worked perfectly.

  However, on January 8, 2016, I updated the date of our copyright made one or two other typo corrections made and then build a new one. Apparently, that's when everything goes haywire. MOST (but, curiously, not ALL) graphics in my chm file had been replaced by the symbol ' broken / lack of graphic link. Here's a sample:

  

  The really weird thing is that every graph, without exception, displayed correctly in its section related when I open the subject to change, as well as in Preview Mode! Yet when I create my project and display the final result, the graphics disappeared. And this isn't a case where all the images are missing or visible in any given topic - some graphics within any given topic are there while others are missing.

  But wait - it gets even MORE bizarre. IF I:

  • Open each topic in my project;
  • Double-click on each graph to open the dialog box Image ;
  • Click OK to close the dialog box Image (he did NO CHANGE see you ;))
  • Save the subject;
  • Close the topic;
  • Once that all the subjects have been "updated" then generate my primary Layout, all THE IMAGES ARE like MAGIC!

  I've done this TWICE. But the minute I close my project, go home for the day, open my project Sunrise the next day, make some changes more and then generate my main layout, I'm back to square one and most of my images were once more POOF! I simply cannot continue touching each chart every day! My project includes 535 topics and about 850 graphics - many are reused across so touching each of them is really out of the question.
  

  
  

  I did several searches trying to find just a small idea of what is happening. I'm really at the end of my mind - I hope someone has an idea how to solve this problem - as I said, I'm ready to scream!

  
  

  Nancy

  Nancy, have you tried to demolish your CPD file?

  If you don't know how to do this, click on the link below and a video it will guide you through the process.

  Click here to see

  See you soon... Rick

• Magic mouse is not able to pair under Windows 7 Professional

  Magic mouse is not able to pair with MacBook Pro early 2011 Windows 7 Professional 64-bit.

  Y at - it a tip for the pair?

  Can you cancel the twinning of the two operating systems mouse, pair with Windows, first of all and then match it with OS X second?

• Install Japanese under windows XP Professional without installation CD. I try with Office XP in Japanese, but I have the problem.

  I want to install the Japanese language in my windows XP Professional. But I don't have installation CD. So, I tried to look for how to install it without the installation CD. I just got this way for Office XP so far.
  All first, I installed the Japanese language pack is http://www.microsoft.com/en-us/download/details.aspx?id=8289, and it succeeded. Then I restarted my computer, but it can still read the Japanese letters.
  And I have installed the Global IME (Japanese) http://www.microsoft.com/en-us/download/details.aspx?id=22917
  While it was installing, an error message appeared. And he says this configuration requires Office XP. I feel strange because the page says that Japanese language pack isn't required Office XP Global IME (Japanese) says that. But when I was installing the Japanese language pack, there was no problem with Office XP. So, please help me. is there another way to install it? Thanks in advance.

  Hello

  Yes, you must install Office XP first.

  Follow the steps to install the Japanese language pack.

  a. first of all uninstall any Japanese language installed in the Panel.

  b. restart the computer.

  c. then try to install the Office XP Tool: Global IME (Japanese) using the link below:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=22917

  d. then try to install the Japanese language pack.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8289

  Hope the above information is helpful.

• Cannot find Windows Media Center in the list of programs under windows 7 Professional

  I can't find the windows media centre in my system windows 7 Professional.

  I've tried going to Start, programs I have Media Player and a creation of dvd and other.

  I also used the search tool.

  I tried upgrading my original installation disk. It is a disaster which took several days to recover from.

  I tried teak support but my product key has expired.

  It can be installed but turned off. To activate it:

  1. click on Start Orb (lower-left) and then Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. look for the entry called multimedia & and expland the sign +.

  5. put a check mark in the check box for Windows Media Center.

  5. click on OK.

  I hope that your Windows Media Center should now appear.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Cannot connect to all accounts under windows 7 Professional. Too locked admin account.

  I'm trying to connect my Windows 7 Professional computer. Normally, it ignores the screens account all together and auto connects when I turn on the computer. My account has no password. Today, when I booted up it he went into a log on screen with my account and 'another user' option I've ever seen elsewhere. I can't log in to my account. When I try it says he said: "you cannot connect because the ögon method you use is not allowed on this computer. See your network administrator for more information." There are no other accounts on this computer and I have an account admin is there something I can do? I can't do everything. Thank you!

  Hello

  -You're on a domain network?

  -Have there been any changes made on the computer before the show?

  -What happen when you try to connect through the other user? You are able to boot to the desktop?

  I would suggest trying the following steps and check.

  Case 1: Group Policy "" Allow the local newspaper"was not set up to allow users or users of the domain. Configuration allow users or domain users to connect to the computer or the domain, you must add users or users of the area to "allow the local newspaper. Please follow these steps to add users.

  1. Run gpedit.msc.
  2. expand Configuration ordinateur\parametres securite\strategies windows\parametres
  3. click on user rights assignment
  4 4 veiller ensure that "Allow the local newspaper" includes administrators, backup
  Operators, domain users or users.

  Case 2: Group Policy "'Deny log on locally' has been installed to deny users or users of the domain. For the installer allow users or users in the domain to connect to the computer or local domain, "Deny log on locally" must be empty or no user or users of the domain in the list. Please follow these steps to remove users or users of the domain of the 'Deny log on locally '.

  1. Run gpedit.msc.
  2. expand Windows Settings\Security Settings\Local Policies
  3. click on user rights assignment
  4. make sure that "Deny log on locally" is empty.

  Case 3: Local group policy allow for user logon. However, group policy domain that overrides the local policy does not allow users to log on locally. The resolution is to modify the domain policy to allow users to log on locally.

  Case 4: The domain policy allows domain users to log on locally, but is not the local policy and domain policy does not apply to the computer. The fix is running gpupdate to force the update of the domain policy.

  Case 5: Norton Firewall blocks communications between the domain controller and the client. The solution is to disable Norton firewall or reconfigure to grant access to the domain controller.

  It will be useful.

• Tecra S1 under Windows 2000 Professional external display problem

  As I can't answer in the original thread (1831), because it is locked, I put here my answer to the answer of the Quad.

  Quad first wanted to know if we have installed the Tecra S1 on a recovery CD.

  No, we do not have. We have created an image that consists of an unattended installation. It is installed from a Windows 2000 RIS server.

  Quad also said that the Fn + F5 is enabled after the installation of the utility Hotkey for display devices.

  We downloaded the hotkey utility, but when we tried to install it we got the error message you "Driver not found" and suspended installation. We have installed as a user with administrator privileges.

  We do something wrong, or this utility owes something to be installed as well?

  Kind regards
  Harro Hofman
  Material specialist

  The Netherlands.

  Hi again Mr. Hofman,

  First of all I must tell you that this is a typical problem. AFAIK Tecra S1 comes with the Professional Windows XP Home edition and optionally with W2000 professional. This two OS has been tested and Toshiba offers all drivers and tools to Toshiba download website.

  It will be interesting how you created this image. What was the basis for this image? You are installed to the first completely Tecra and after created image?

  Have you had problems before the creation of the image?

• AutoPlay does not not under Windows 7 Professional (64 bit)

  AutoPlay does not.  After searching the forums took measures following, all with the same results.

  Autorun Panel:

  (1) the machine reset to default, Panel closed and recycled.

  Set of 2) each option for the program appropriate (s) desired and recycled machine.

  Regedit:

  (1) registry implemented as backup.

  (2) adjusted HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/services/cdrom/AutoRun - with a value of (1).  Left regedit and recycled machine. Note: The article below Autorun (AutoRunAlwaysDisable) contains a list of devices. Since many of the listed devices are my engraver of CD/DVD BD - ROM mark, this could be the cause of the problem?  If so, how to change the list so that AutoPlay will work?

  Hello

  Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is this Microsoft Windows XP Professional x 64 edition works on a second generation core i7 processor?

  The Asus P8P67 Deluxe Motherboard will be a socket LGA 1155 with Intel P67 chipset with a second generation core i7 I want to run Windows 7 or Windows 8 (I am currently trying the beta version).  The reason for the x 64 Edition is due to the large amount of RAM it will support what someone has an answer?  Thank you.

  As long as the hardware manufacturers for any material that you plan to use have support/drivers for Windows XP; Yes.

  Insofar as the processor - Yes.

  Motherboard - Yes.

  So, as long as your other equipment (whatever they are) is still supported under Windows XP Professional 64-bit Edition, you should be fine.

• Window movie maker 2.1.4026 version will not show the film in Windows 7 Professional

  In our computer lab we are now under windows 7 Professional on low end machines.  When collections are entered in the table of Storyboard, click on preview, they are not; only a black window. Help me I have 30 students working on projects and all undergo the same thing.

  It's a bit confusing...

  You say that you are running Windows 7 on low end machines...
  you run Windows 7 Starter Version?

  Are completely updated your video drivers?

  Have you tried to uncheck all filters in Movie Maker?
  Tools / Options / tab compatibility on the left by clicking on the...
  "Restore all defaults" button may be worth a try too.

  OK... why you run Windows XP, Movie Maker version
  2.1 on Win 7?

  There are two other versions that may be better for you:

  No guarantee but the next for an installable download
  version of Vista Movie Maker 6 may be worth a try

  * Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Vista Movie Maker 6 installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  Vista Movie Maker 2.6 also might want to try:

  Windows Vista Movie Maker 2.6
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=34
  (this is similar to the version of Win XP Movie Maker 2.1)

  And... When you mention collections... are you referring to
  . Project MSWMM files? If_Yes_were they created on these
  machines with your current version of Movie Maker 2.1?

  And you have all original source files (Photos,
  The video clips, music files) available?

• Field of password missing on the first EHF home screen in Windows 7 Professional

  My first homescreen under Windows 7 professional small account and name but picture shows NO password field. Only after hitting enter or mouse left click password field contains a second Green with the larger picture of the account and the name. How can I change to make the first home screen shows the two account/name of the image as WELL AS password field? Your advice much appreciated.

  Hello

  If I understand the question, you don't get password filed the first home screen. You must press on enter or left click the mouse to get the password field. Please let me know if this is not correct.
   
  To make you must hit enter or click with the left button of the mouse to get the password field, it's normal.
   
  You can provide the food in the feed back link:
  http://support.Microsoft.com/common/survey.aspx?scid=sw;en-us;2310&altStyle=MFE&renderOption=OverrideDefault&showPage=1&FR=1&nofrbrand=1&WA=wsignin1.0
   

  Hope this information helps you. If you need help or information, please reply to this message. I'll be happy to help you.

• File not found: Windows XP Professional 2 - Snapshot294.vmsn

  Hello

  I've just updated to 6.0.3 merger Friday and everything worked fine. Tonight, I wanted to start my VM and it gives me this error message: file not found: Windows XP Professional 2 - Snapshot294.vmsn

  When I look on my computer for this file or any other file of snapshot, it appears in the Finder, but the virtual machine cannot start. Even a restoration of the snapshot does not work.

  I need to have Windows running for work emails, so any help is appreciated. I am running 10.9.3 Mavericks and had NO problems so far.

  Thank you

  Well the vmware - vmfusion.log said...

  TRUCK: Magic trouble 0x74725c7b in the header, ' / Volumes/Personal HD/Virtual Machines.localized/Windows XP Professional 2.vmwarevm/Windows XP Professional 2 - Snapshot294.vmsn'.

  It's probably because this isn't a zero-byte file as it should be if trying to replace if he was absent.

  How did you create this file?  Did you use TextEdit and he recorded under "Windows XP Professional 2 - Snapshot294.vmsn.rtf ' and you deleted the extension .rtf?  This is what it looks like!

  It must be a zero-byte file, and the best way is to use the touch command in a Terminal as in the following example.

  press on "Windows XP Professional 2 - Snapshot294.vmsn.

  So drop the output of "Windows XP Professional 2 - Snapshot294.vmsn" file and replace it with the attached here.

  The file "Windows_XP_Professional_2 - Snapshot294.vmsn.zip" joint contains a byte zero "Windows XP Professional 2 - Snapshot294.vmsn" file.  Double-click the file "Windows_XP_Professional_2 - Snapshot294.vmsn.zip" to extract the attached file.

  After replacing it and then try to start the virtual machine and let us know if it starts.

  Also I see that you have taken another cliché (35007 28 mai 13:34 2 - Snapshot296.vmsn Windows XP Professional) and I wish you didn't like it can complicate things however replace the "Windows XP Professional 2 - Snapshot294.vmsn ' with that I attached and lets see where you are.

• I have a laptop Dell Latitude D830 that came pre-installed with Windows XP Professional edition. Now, I need to format the system.

  I have a laptop Dell Latitude D830 that came pre-installed with Windows XP Professional edition. Now, I need to format the system. Also, I had installed Norton Internet Security, but right now I have not any of the CDs. help, please.

  Also, will I lose Norton if I format the system? How do I keep it?
  original title: System format of...

  Hello JothinVedere

  After you have re-installed Windows XP, you can go on the site Web of Norton and download the software from their part. Once you have downloaded it you should be asked for an email or an account that you configured when you first bought Norton, log. After that, Norton is turned on with the rest of the time for your subscription should be displayed. If you have further questions about Norton, you can click on their link to support here. I hope this helps.

• I have no CD/Media my saved Windows XP Professional and I format my C drive. Now, I am in Saudi Arabia.

  MY C drive is almost full and my system is slow, I am enrolled in Windows XP Professional in my laptop, I am originally from Pakistan, but currently I am in Saudi Arabia and have no CD/Media and keys als. Where can I get the key in the windows file? If I format my C drive, how do I reinstall Windows XP Professional registered.

  You won't be able to reinstall Windows XP until you find your original Windows XP disc.  In the meantime, please visit:5 ways to speed up your PC Carey Frisch

• Can I install Windows 7 Professional on my Windows 7 Home Premium without formatting the hard drive?

  I have a genuine copy of Windows 7 Professional, I would like to install on my laptop, but I'm afraid to do that because I don't want to format the hard drive and lose all my files, programs, etc. Is it possible to install it without formatting the hard drive and lose all my data? Thank you.

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.