Forms of several columns, it will work?

Similar Questions

• It will work with former apple TVs remote?

  I just wanted to see if this new remote will work with previous Apple old tv. Anyone know? Thank you

  N ° the older Apple TV does not work with the new type of controller.

• I had a HP with XP Media Edition on this, got angry and destroyed someday drive hard, but always have the key, the key will work on another form of XP?

  As I said, I always have the key for it. But does not know if the key will work on just a normal copy of Windows XP? Also cannot find a download of XP? Guess that's what happens when you wait 17 years to ask about it.

  If your computer was HP and it came with this version of Windows installed, then you probably have an OEM of Windows version.  An OEM key does not work for a retail install the version of Windows.  To reinstall Windows without owning a set of install CD/DVD from HP, you will need to contact HP for help as they regulate the licenses Windows installed on their products.

  HTH,
  JW

• How to get a separate account of several columns

  I've done this before and I'll darn why I don't remember this.
  
  A table with 3 columns with the primary key defined in the column.
  
  Line a, b and c
  NUM.
  1 020 how abc
  2 why 030 def
  3 010 no IGS
  4 how 040 abc
  Yes def 5 050
  6 060 why def
  
  So what I want is a number of unique values to columns b and c as if b and c were in fact a field.
  
  So the result of the query:
  Count = 4 unique lines.
  
  I hope I make some kind of sense. It is a bit much to know if the number of occurrences of each duplicate value, I know not just get the number of unique lines of lines not indexed will be enough. Because the query is supposed to be universal for several digital and alphanumeric data columns and can be extended for several columns, I'm just trying to get a basic skeleton which works for an analysis "on the fly".

  It will be useful.

  SQL>create table rb as select rownum A, rownum b , rownum c from dual connect by level < 11;
  
  Table created.
  
  Elapsed: 00:00:00.31
  SQL>select count(distinct a) from Rb
    2  union all
    3  select count(distinct B ) from Rb
    4  union all
    5  select count(distinct c) from Rb
    6  /
  
  COUNT(DISTINCTA)
  ----------------
                10
                10
                10
  
  Elapsed: 00:00:00.53
  SQL>update rb set b = 3 where B > 5;
  
  5 rows updated.
  
  Elapsed: 00:00:00.26
  SQL>commit;
  
  Commit complete.
  
  Elapsed: 00:00:00.26
  SQL>select count(distinct a) from Rb
    2   union all
    3   select count(distinct B ) from Rb
    4   union all
    5   select count(distinct c) from Rb
    6   /
  
  COUNT(DISTINCTA)
  ----------------
                10
                 5
                10
  
  Elapsed: 00:00:00.53
  SQL>
  

• Output and group records into several column format problem

  Hi all

  I'm banging my head on the wall with this one. I have a query that displays the result in the form of two columns, it works fine.

  I have a problem when I try to use "group"for the field DSC1 doesn't show duplicates."  He transforms the output in column 2, column 3 and column 4 spots white all along.

  Someone knows how can I get it to display 2 columns of output and does not show in double DSC1 fields? The following are examples of what is happening:

  
  

  1 example of what he does without group (note to Apple is twice, which is not):

  Apples apples

  Orange peaches

  banannas grapes

  What I need to do (only show each DSC1 once and continue with the format of two columns) :

  oranges apples

  Fisheries banannas

  grapes

  Here is the code I use:

  < cfquery name = "getProduct" datasource = "mydb" >
  SELECT * from ecitm
  WHERE DSC1 <>' '
  order by DSC1

  < / cfquery >

  <! - start the 2-column output table - >

  < table border = "0" width = "90%" border = "0" align = "center" cellpadding = "5" cellspacing = "5" >
  
  < cfset newrow = false

  < b >
  < cfoutput query = "getProduct" group = "DSC1" >
  
  < cfif newrow EQ "true" >
  < b >
  < / cfif >
  < td >
  #DSC1 #.
  < cfif DSC2 NEQ "" > "".
  < br >
  #DSC2 #.
  < / cfif >

  < br >
  < a href = "DetailsList.cfm? ID = #getProduct.ID # & litm = #getProduct.LITM #" > VIEW < /a > DETAILS
  < table >
  
  < cfif getProduct.currentRow MOD 2 EQ 0 >
  < /tr >
  < cfset newrow = true >
  < cfelse >
  < cfset newrow = false >
  < / cfif >

  
  < / cfoutput >
  < /tr >
  < /table >

  The currentRow always property will count the number or records in the record setting loop, if you their output or not.

  Since you are not the output values for each record in the Recordset, you must count the itterations yourself.

  Put a meter of itteration before the loop.

  Update the counter at the top of the loop.

  OR on newer versions of CF

  Reset the counter in the true clause of the block, where you also define new line. >

  Then use the variable in the iit instead the currentRow property to determine the number of items have been posted.

  **** OR ****

  You could do a simple SQL command does not get duplicates first and then use a loop of simple without any of the grouping and additional logic that you do.

  
  
  SELECT DISTINCT *
       FROM ecitm
       WHERE DSC1 <> ' '
       ORDER BY DSC1
  
  
  
  
       #DSC1#
       
  
      
  
  
  

• Primary key several columns with Date - parameter problem

  All,
  I'm having a problem where I can not find the answer to. I looked upstairs and down nothing helps. Help, please.
  
  The issue is that I have a table that has a primary key of several columns and a column is a date, and the other is a string. I have a simple search and I want a picture update of the results table that users can click on and go to another page to update this record. The question is when I launch an appeal based on the updated image, I also want to define the settings based on the record that I have selected. So I put the string parameter and that works very well. The problem is with the date. When I put the setting date this market but he chops off the coast of the timestamp. Later when I try to access this setting "("dateParameter") pageContext.getParameter"; that it will bring a date as December 15, 2008 but I need the whole date and time stamp (i.e., December 15, 2008 10:20:33) to properly identify the record.
  
  Help, please!
  
  Thank you
  Colby J

  Hello

  because each parameter go into url as a format string, so you will never get the full date with timestamp setting, the solution would be to

  1.) set a fire on the photo update action, give his name to the event as "update."

  (2.) by clicking Update photograph fires this event.

  (3.) processFormrequest in the controller method

  OAApplicationModule am = pageContext.getApplicationModule (webBean);

  If ("update".equals (pageContext.getParameter ("event")))
  {
  This will give you the select line when you click Update

  String rowReference = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
  Line VORowImpl = (EmployeeSummaryVORowImpl) am.findRowByRef (rowReference);
  Timestamp sdateVal = (String) row.getAttribute ("Date value");

  This will transfer the values to the next page
  pageContext.putTransactionTransientValue ("transferdvalue", sdateVal);

  }

  and in the next page, you can get the value as follows

  timestamp getDateVal = pageContext.getTransactionTransientValue ("transferdvalue" l);

  hope this will solve your problem, please let me know if you face any problem

  thanx
  Pratap

• Why Firefox suddenly empty - no address bars, research or tool uninstall/reinstall d/n is resolve - now only v 3.6 will work?

  I've been using the latest version of FF and last week, the browser froze and when I restarted it was completely empty. I went through the help section, tried to uninstall manually by deleting files and reinstall several different versions, but the only one that will work at this point is 3.6.28. Your help sections and non-existent customer service SUCK - I don't have days/hours to mess with this and will completely abandon FF if adequate assistance is not received quickly.

  Who did the trick - thanks! I think it's only something called Codec-C, identified by Mozilla as malware on 29/10/12.

• HP Pavilion HPE h8-1214: GPU EVGA GTX 750TI will work with my HPE h8-1214

  Hello. I plan to update my graphics card soon. Accoring to this, I have a card Mother Angelica. I read another post here of a user having a h8-1230 with a card Mother Angelica Revision2 , who said the EVGA GTX 750TI was inconsistent with this Council, and that he should look for a version of the 750TI MSI instead.

  I was wondering if the same applies to my PC because my model is older that the other user has been. I prefer to use the EVGA GPU version, as it is cheaper than the MSI one, but I need to know if it will work with my computer. If not, will the labour card ASUS model, or should it be MSI? The map I intend to buy is present (EVGA) or this (ASUS).

  In addition to this, does anyone know if the stock fans and 300W power supply provided with this computer would be appropriate for the new card, or not? I'm looking forward already pass the power supply, but I don't know for the fans. If I were to upgrade the PSU, 430W would be enough, or should I go with 500W? Thank you.

  If anyone in the future who might wonder, I had this GPU works on my computer, but I had to buy a specific version of the map and the way I got it to work was pretty weird.

  You need to buy this version MSI of the card, because the card itself has a switch on to change the UEFI to Jack supported BIOS Legacy. As far as I know, other versions of this card are UEFI only, and this computer does not support UEFI, so he needs a card that can run in the traditional way. It may look like a fit snug in the case, but it does not seem to cause problems and it cools very well with fans.

  I also changed to a block of power SUPPLY Corsair 430W, which seems more than enough for the system, even with the card to load max. You could go to a higher power, if you consider the upgrade of several pieces, or reuse the power supply in a more powerful system later. I have not upgraded fans in the computer and do not seem to have cooling problems.

  Now to make it work...

  I had some questions:

  When I first turned on the computer, it froze on the screen of the POST (the first screen with the HP logo). It would allow me to get into the BIOS, and it would beep 4 times (with long breaks between the two), before finally to a black screen with a cursor blinking and just stay there.

  What finally got it to work:

  I disconnected all the instructors of the map (cables VGA, DVI or HDMI), and then I turned on the computer. Without any monitor plugged, the computer should beep 6 times (the power button LED flashing with it), then the power led turns off. The LED went off as soon as I plugged my monitor into the computer (in my case, I used a VGA cord).

  For the first few seconds, the screen remained blank and does not save a connection. The computer is beeping intermittently for a while, then after about a minute my detected monitor suddenly a signal, and the screen displays the Windows splash screen. I was able to boot into Windows, all right, even if the resolution of the screen will be a little goofy, until you install the drivers.

  I jumped in the driver installation CD, and once it finished installing, I restarted the computer. Now, when it restarted, I had to do the same procedure I mentioned above so that he could start again. Now that the drivers are installed, I don't know if I'll have to do this procedure everytime I restart the computer (don't have not shut down since then), but since I rarely shut down my computer, it's worth it to me.

  Hope this helps someone else, because I know that I spent 10 hours searching for ideas before discovering this solution myself.

  Now that it is running, I have problems and I have run several graphics intensive games on it without any problem with cooling or power draw. It is very quiet, too. Even with a game running on high quality graphics, I can barely hear the fans when there is no other sound in the room.

• A mid-Macbook Pro will work El Capitan OK

  I know that Apple says El Capitan will work on a Macbook Pro mid, but I was wondering this works well, because memory is limited to 4 GB.  I have a 2.2 Ghz core 2 with 4 GB of memory running 10.8.5. Everything works fine now, but Apple is no longer supported and updated security.

  After Turbo tax, I'll need to upgrade my OS to run their software for 2016, lack of support from security. Other software not Apple that I use are professional digital Canon Canon EOS Utility, Canon ImageBrowser EX, Photo Shop & Bridge CS3 which would not have long term and is the second big question after Turbo tax.  I also have a Canon i9900 printer, an Epson Artisan 837 printer and an Epson V600 Scanner. I need for my printer and scanner to work.

  My question is:

  (1) new OS works well with my old Macbook Pro or is it a stranger

  (2) recommendations on how to proceed if I upgraded the operating system. I've read a few people downloading to a card reader or thumb and run it from that as a trial.

  (3) it is time for a new Macbook Pro.

  MA895LL?

  Mid-2007?

  If this is the model, Yes, it will run 10.11.3

  It won't be great with 4 GB of RAM, in fact it will be a bit tedious if you start to tax it applications.

  You may be able to spit your boot drive in another partition and install to that partition and boot to it, this will give you the most responsive install and allow you to keep your current operating system.

  Your other option is an external drive. You can install 10.11.3 on one dedicated or external mechanical partition or disk hard SSD and boot to it.

  All other software and drivers should be analyzed to determine if they will work in the upgraded operating system, you will have to search the web and find out yourself, but several printers and scanners do not have a life long development and many of your devices may not have drivers by developers. Contact companies and ask if you can not find on the web.

  Back up your system with Time machine before continuing.

  the other options is TurboTax has a version based on the web of their software? Use and maintain your system where it is and work, invest in another Mac when you can afford to do so if you need future 10.11.3.

• The jury of ELVIS will work with LabVIEW Student Edition 2010

  Hello

  This question was asked in the forums of LabVIEW, but no solution has been found. I have a windows 7 x 64 machine with LabVIEW 2010 Student Edition. When I try to install ELVIS 3.0.5 traditional software I get the following (no error code) message: "this Setup program requires the LabVIEW 8.5 development system or later to be present on this computer. Development system LabVIEW Base in any version of LabVIEW is not supported. Please install LabVIEW and then rerun setup of NI ELVIS. »

  I also installed the DAQ software for PCI DAQ board. I do not have access to a 32 bit machine and do not know how to get my board work (no ELVIS II) ELVIS. I have provided a screen shot of the message during the installation of the software of ELVIS.

  .

  Hey dduong16,

  Thank you very much for taking the time to provide additional information. After talking with several experts about your system, we concluded that this error is the result of an incompatibility between 3.0.5 Elvis and LabVIEW 2010 64-bit. Even the latest drivers of Elvis are not yet supported by 64-bit LabVIEW: see notes in support of the operating system on the Readme Elvismx 4.2.3

  To solve your problem, you will need to uninstall the 64-bit version of LabVIEW and install a 32-bit version. If you are a student, you should be able to get this version of your computer (it will work fine with your Windows 7 64-bit OS - it will install on 32-bit OS emulated inherent in your system). If you are not a student, please send me a personal message, and we will be working with an account representative to get you the necessary version.

  I apologize for the inconvenience, this made you and appreciate your patience. We have updated the Elvis 3.0.5 Readme to reflect this incompatibility (the change may not appear yet, because it takes time to propagate through our system), and I'm trying to create a Base of knowledge on the subject article to help future users who encounter this error.

  If there is anything else that I can help you, please you after return. Thank you!

  ~ kgarrett

• Does anyone know if the Sims 2 (and EPs) will work on Windows Vista 64-bit?

  I was hoping to get a new computer, this weekend, but before I can, I need to make sure that everything will work actually on this subject. Microsoft says that the Sims 2 works on version 32 bit Vista, but all new computers come with the 64-bit version. So, anyone know?

  Thank you very much to all those who can help you!

  -J' ticked the boxes of the EPs and EPs are two that do not work with Vista University and open for business, but I'm not running the game through them being the most recent EP I apartment living. And, since AL works with Vista, the full game and all former EPs should work, right?

  Hi, Julia:

  While searching the http://www.bing.com results, it seems that many people have reported that the game is compatible with both 32 - and 64-bit Vista machines.

  I hope this helps!

  Justin

• I have a pc windows 7, but the game I've been watch is made for vista thay will work the window?

  I have a pc windows 7, but the game I've been watch is made for vista from the window of thay will work on 7 the window?

  Hi, Adamivins,

  You can right click the game.exe and select compatibility mode

  -Or-

  You can install XP Mode with Virtual PC.  It's free for Windows 7 for legacy applications can be used.

  Microsoft has added several new features in Windows Virtual PC to make it easy to use and help you to run many older Windows XP applications in Windows 7

  http://www.Microsoft.com/Windows/Virtual-PC/

• A 80 mm m2 PCIe drive will work in the ZBook 15 g2?

  I am considering buying a g2 ZBook 15 opportunity which is * not * have the m.2 PCIe drive (drive Z Turbo) and I would add a.  Unfortunately the HP person I talked on the phone can't seem to find a way to sell me one.

  I found this thread:

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/zbook-17-G2-options-for-adding-a-new-Z-T...

  where the author indicates the m2 PCIe drive iin 17 g2 s a unit of 60 mm (I guess 15 g2 uses the same).  Readers of PCIe m2 only I can find are 80 mm, so I wonder if those who will work.

  So I'm looking for answers to two questions:

  1. a 80 mm m2 PCIe drive will work in the ZBook 15 g2?

  2. in the case, where can I buy a 60 mm m2 PCIe by car?

  Thanks in advance

  OK - found the answers in this thread:

  http://Forum.NotebookReview.com/threads/zbook-G2-owners-alternatives-to-z-Turbo-drive.769103/

  First of all, don't - 80 mm form factor will not work.  You must use the form factor of 60 mm.  They are not the same.

  Second, according to this thread alone, 60 mm available PCIe drive is the SanDisk A110 but I can't find it anywhere.

  Thirdly, at the time of this thread (January-February 2015) you cannot buy the HP HP's PCIe drive unless you get it with the laptop.

  So, in the end, as early may 2015 you cannot move to a PCIe SSD with the ZBook g2 series.  You have to buy when you buy the laptop.

• a lens EF-S 55-250mm f/4-5. 6. IS STM will work on a powershot sx500?

  a lens EF-S 55-250mm f/4-5. 6. IS STM will work on a powershot sx500?

  Yes, it looks like one of my chipmonks lol

  You can see how it performs your depth of field considerably long distances. Youshouln can't still need in most cases with this power zoom. You might need a tripod unless your super stable.

  It is a generic TV converter I don't see any listed for your model, I have the similar to your SX50HS. I use adapters to mount a 2 X tele-converter that Ive had for a former model Powershot to mine, but only on close shots with zoom, very little.

  I found with 50 X zoom that I don't need.

• A USB cable will work with any device?

  Title: USB cable original

  Hello.

  Let's say that a SCART is not equipped with a USB cable.

  Is a 'universal' USB cable to work with "any" device USB or different types of devices have different types/forms of USB cables?

  Thank you.

  USB is pretty universal.  The flat rectangular plug that goes in your computer is known as a 'Type A '.  The square plug that usually goes into a printer is a "Type B".  There are also small connectors (Mini-A, Mini-B, Micro-AB, and Micro-B).

  <>http://en.Wikipedia.org/wiki/USB#Connector_types >

  Generally, if you find a cable with the appropriate connectors, this will work.  If the device to which you are connecting does not fall into a general 'category' (e.g. mass storage devices), then the driver software may be necessary at the end of the computer.

  HTH,
  JW