FrameMaker2015 - clarification on LTR to overthrow of RTL.

Similar Questions

• Detection of RTL and LTR TLF text

  Hi all

  I put RTL in the preferences panel.

  I need to test the parameter 'direction' RTL or LTR. He reports to Null if she has not explicitly been set as she inherits the LTR.  I'm trying to explicitly set LTR when I initialize the text and put it on the stage or at a minimum, test of null value and force it.

  import flash.text. *;

  import flash.text.TextFormat;

  If (txtField.direction == null) {}
  trace ("it traces Null"); / / It traces Null
  txtField.direction = LTR;
  }

  RangeError: LTR direction property value is out of range
  at flashx.textLayout.property::Property$/defaultErrorHandler()
  at flashx.textLayout.property::EnumStringProperty/setHelper()
  to flashx.textLayout.formats::TextLayoutFormatValueHolder/setCoreStyle()
  to flashx.textLayout.formats::TextLayoutFormatValueHolder/set direction()
  to flashx.textLayout.elements::FlowElement/set direction()
  to fl.text::TLFTextField / set direction()
  code: Page1 / textOverFlow)
  code: Page1 / _Topic)
  code: Page1()

  I tried to add this:
  Import flashx.textLayout.formats;

  Then it says:

  Page1.as, line 16 1172: Definition flashx.textLayout:formats could not be found.

  Thanks Sinious,

  He got really close. The first would not work. I tried a lot of variation on that one. Before and after that your solid entry.

  The second/better worked during the import of the . Direction too.

  A:

  Import flashx.textLayout.formats;

  S/N:

  import flashx.textLayout.formats. Indications;

• LTR and RTL paragraph direction in paragraph Illustrator Panel are missing.

  I'm trying Adobe Illustrator CC for a few days to design and layout Arabs related books and Panaflexes. But I came across a very strange problem in the previous version of the paragraph of my Adobe Illustrator CS6 Panel there should be two buttons named "Direction of paragraph from left to right, and 'Right-to-Left paragraph sense', but now in the new CC version, the two are missing. I crossed at options Type preference but have no success. Please help me. The last by Direction (RTL) is a must for the family Arabic languages (Urdu, Pashto, Persian, etc.). I have searced for the region LED, but there is no Mena in the CC family. I also looked in the Adobe forums, but there is no neat & clean response. If this problem exists I and those who are average will have to revert to the previous version. Strangely, these two buttons (Options) are available in CC of Photoshop and Indesign CC (and both are not MENAs).

  There was someone else here with the same question.

  When you install illustrator cc, there is an option to select the installation language English/Arabic. Then you'll all Arab options. Apparently, this does not work for the guy who posted the problem, but it still works for me. I was back for a few projects by simply reinstalling on my existing installation.

  You can also turn on "show options Indians" in the preferences under "type". You then select composer Middle easterners in paragrph options menu. This will not give you additional buttons, but your text is displayed correctly. and you won't have any options for signs kachides or diacritical tho. that really sucks. but then if you do not install the Arabic version then you lose all the Asian type parameters. That's why I had to reinstall a couple of times because I get Chinese projects and the Middle East.

  You can also save paragraph styles and character in you old Arabic version and those use to update the new text. You can save these styles in your documents by default so that they are always ready to use.

• Label RTL APEX_ITEM

  Hello

  I use APEX 4.2 with DB EE 11, I have dynamic screen using APEX_ITEM, my application is bilingual, the problem is the other RTL language where when I still use the package APEX_ITEM LTR, how can I fix that?

  APEX_ITEM. CheckBox2 (rec_head.rnum, - p_idx

  rec_head.poll_seq, p_value

  NULL,--p_attributes

  rec_lines.value_if_answer, p_checked_values,

  NULL,-p_checked_values_delimiter in varchar2 default ':'

  rec_lines.poll_dtl_seq,--p_item_id

  rec_lines.answer_desc - p_item_label

  )

  See also: Re: language switching of the stripe (from left to right)

• RTL Dreamweaver/PS problems

  Hello

  FOA, thank you Adobe, you ROCK!

  With regard to DW:

  I am facing many problems RTL build my website (for example on this page).

  The main problem is with the WYSIWYG. The Arabic text (it is RTL) shows that the LTR. I need to download the site on the server to see how it will look.

  PS regarding:

  I need to write my text in an external website (like this one) and then copy to the PS under the Arabic text (or Hebrew incidentally) is considered to be LTR.

  Y at - it news or suggestions about these problems?

  Thank you d ' award!

  This will help you make the RTL text in your web pages.

  http://www.w3.org/international/questions/QA-HTML-DIR

• FrameMaker2015 - Page numbers in the mess after the printing of 'last leaf' first.

  There seems to be no facility to reverse the order of page numbers when creating long Arabic & Hebrew documents and where the pages are to be attached at the end of a series of normal pages left to right .

  I was hoping this would be an automatic feature - for executives of 8-12 in Arabic, I had to save the document to the Mif and run a VERY complex program that extracts the folio box and puts managers folio on pages of body that then let me reverse the order of page number to hand.

  Bob

  Post edited by: Bob Wallace to change from RTL to LTR

  I think that you have to maintain the FM document sequentially even for Arabic pages i.e. Page 91 should be the first page of Arabic and so on. Now the booklet and PDF can be generated as follows:

  • When the booklet, you can select 'last leaf first' to Arabic range(91-100), and this page can be added with the other pages(1-90) LTR. For the booklet page numbers would look like 1, 2, 3... 90, 100, 99... 91 and so when the Arab user would read the Arabic content in the booklet, he would begin reading the content of page 91 and for him that the page number would increase also 91 to 100, he was reading.
  • For the PDF, you can directly generate the PDF file.

  Let me know if that makes sense.

  Thank you!
  Hard

  FrameMaker engineering

• Question RTL

  The facts:

  • I found how to implement Adobe Edge in Adobe Muse.
  • Its not work as long as I'm on LTR language.
  • I placed the OAM file in Muse and boom! Here's my animated film.

  The problem

  • My Edge animation is include RTL text.
  • I don't know where to put the "dir" = rtl tag in the HTML file.
  • There is no effect on the file (OAM) I just put in MY project of muse.

  FYI

  If I open the html file, the one with the tag (dir = rtl) I just buried, RTL works very well.

  No idea...

  TIA

  The short answer is, Edge host does not support the text of rtl.

  To make this work, you will need to modify output files created from Muse, after doing the file > export to HTML format. As part of the output, there will be a folder in the current folder that contains a folder for each of your animations of edge. You will need to open the .html and add the direction property.

  There may be a better way to do it. You could try posting in the forum Board animate animate on-board CC>.

• RTL add interactive report (Menu Action)

  Dear APEX Experts
  
  I am trying to develop a law at the request of APEX left. I realized a lot of things, but I have a problem that I can't solve on the Action Menu of the interactive report.
  
  How to reverse the Menu entry 'lines per page? (the entry with the staging arrow right) In addition, the menu collapses on the right side. I managed to back all the other menu entries adding just bodies tag direction to rtl.
  
  I crushed several css properties to make my RTL or LTR application at the same time.
  
  Maybe someone can give me a hint, I dig in the css code and javascript functions, but without success so far.
  
  Best regards
  Sebastian

  Hi Sebastian,.

  you will not be able to change this name because they hard coded into our packages. But you should be able to replace the JavaScript code work with something like.

  // overwrite the existing dhtml_MenuOpen to always uses Right as direction
  (function(){
    var lOldDhtml_MenuOpen = dhtml_MenuOpen;
    window.dhtml_MenuOpen = function(pThis, pThat, pSub, pDir){
      // always use Right for the direction
      lOldDhtml_MenuOpen(pThis, pThat, pSub, 'Right');
    };
  })();
  

  If you put this code in your page header (after the APEX libraries have been removed) or in a separate JavaScript library you should get exactly what you want.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• RTL and XML

  Hello, what is the best way to use the new component text to import the Arabic language via xml in flash.
  
  In the demo with the spinning globe, I noticed that the Arabic text is unicode, the unicode string is actually LTR, then it is displayed with RTL. Obviously, this works very well with wordwrap etc.. Is there some sort of converter that I can get to convert Arabic RTL unicode LTR?
  I also wonder if its possible to import the Arab police a string of XML and have things like the word wrap work correctly, I assume here (perhaps naively) that it is not a format XML of RTL and if there is flash dress not her head around it. I can't imagine writing whole paragraphs of text backwards in xml. To do that I have to use the markup code following the bidi.xml file in the examples, where it separates each row for display to face the problems of film.
  
  Any ideas would be great, I'm sorry if my explanations are a little newby, I'm no gun.
  
  K.
  
  

  This is the application that displays the XML code as to how it will appear to you, so I can't speak to see if it the XML will look like LTR or RTL when you view it. But the idea is that Unicode characters are stored in the reading order. For TLF, it gets the Unicode in the reading order, and then the player converts them to "atoms" which are classified either RTL or LTR according to Unicode values.

  The example of bidi.xml doesn't have much shorter lines, but the same principle works on longer paragraphs as well and TLF, using the player, will correctly paper wrap regardless of the orientation of the text. In order to get the order of the columns, dashes and punctuation to look right, you need to decide if your TextFlow and paragraph is mainly LTR or RTL and set the direction of appropriately attribute.

• HELP: Force setting RTL layout

  Today I activated the Force RTL layout setting in options of developer and now the systemui crashes constantly. I tried to get into bootloader and using the options to the Factory mode and recovery, but nothing has worked. What is the solution to this? Other people have had a replacement from Verizon, but I'm not in the United States, so this isn't an option for me. I need a solution to this ASAP

  First of all the shit on bootloader not be unlocked and now I came across this problem. Using the factory option did nothing, go to the recovery showed '' no command. ''
  After many attempts, you try to run the command adb and trying to get just a data connection, so I was able to back up my data, I eventually went back to recovery mode. Press all the buttons and it has begun to show recovery options. A fact clear data / factory reset and it clear memory internal too not just the apps. Phone started working again.
  Really angry with this locked bootloader shit and no access to his own phone and data user in case it gets stuck. It is the latest phone from Verizon for me.

• Clarification on iMac 21 "memory

  Hi, I want to buy an iMac 21 "and I need a clarification on the configurable compared to the maximum memory at time of purchase. It is written in the configuration page "notes that the iMac 21.5 inches comes with 8 GB built-in memory to the computer." "If you think you may need in the future more memory, it is important to update at the time of the purchase, because the memory cannot be upgraded more later in this model. So I guess that means, if I purchase only 8 GB of memory, I'm stuck with it and I can't upgrade (add memory) later to 16 GB.

  BUT if afterwards I need different memory and I decide I need 16 GB, I can scrap (remove) 8 GB and install a memory of 16 GB instead? It is simply because I don't want to spend money for 16 GB if I'm happy with the 8GB...

  Thank you.

  No, you can't.

  (137939)

• Clarification needed Pavilion a1120n memory upgrade

  First time on the Forum, need for clarification after reading others entry and to collect the necessary information on the PC in question.

  HP Media Center Edition Pavilion a1120n

  Processor: Pentium 4 519 (p) 3.06 ghz

  Motherboard: Asus LRTP - THE (3 goldfish - GL8E) front bus at 800 mhz

  Will support maximum 4 GB of ram

  Unit is equipped with 4-240 pin Dimm, unbuffered, non - ECC 533/400 mhz sticks memory memory DDR2, dual channel architecture

  This office has 2-258 or 516 MB PC2 3200 DDR SDRAM OEM.  I opened the unit to check for this.

  OEM preloaded with Windows XP Media Center Edition.

  Now, most anyone looking at this request, probably why I'm wanting this on such an obsolete machine...

  I have bought new at the beginning of 2005, used the PC for a few months, remarried & it packed to move.  My husband had a Pavilion, so instead of having 2 running side x side, I copied my files in his unit, left (the most recent of the two) packed mine, thinking that we would need it down the road.  The road became long 7 years.  More to the story, but I'll spare you the pain. The only way I can use this material is upgraded to Windows 7 home & I need to increase the memory to install even.  It will be dedicated to the dissemination of music on the internet in the shop, period.

  Here are the complete specs for your HP Pavilion a1120n desktop and it is card mother PTGD - THE (Goldfish3). Please consider the purchase of 2 of the CORSAIR 2 GB Kit (2 x 1 GB) 240 pin DDR2 533 (PC2-4200) VS2GBKIT533D2 or 2 of the Crucial 2 GB kit (2 x 1 GB) DDR2-667 PC-5300 #CT475923 to bring your computer to the 4 GB maximum, it supports.

• Seeking clarification on the SFD in AKM Brushless Servo Drives

  Dear members,

  I'm looking for clarification on the smart feedback device (SFD) installed in the series of servomotors AKM. There is little information available on this subject in the specifications. It appeared that it offers a very high resolution, information on the position of the rotor high precision signals.

  1. how exactly is the PCG provides the position of the rotor?

  2. is there a provision to contract low resolution effect Hall of EPD type feedback?

  Thank you.

  Ansari07

  Hi Ansari07,

  I don't think that this level of control is possible with the AKD. The reader is supposed to close its own current loop on board for the control of switching and outputs of phase. The AKD offer couple, speed or modes of control position, and you can talk to it by Ethernet on the service port, via a field such as EtherCAT or CANOpen bus, or with an analogue signal +-10V or step/dir commands.

  I don't think you can get around all of the internal firmware in the AKD and get direct control of how current passes through the phases.

  Best regards

  Nate

• access licenses client license Clarifications + Server 2012

  Hi all

  I need some clarification in licensing to provide the solution that is right for my customer.

  One of my clients purchased Dell server with preloaded Windows Server 2012 OS (Standard Edition) us (from my company) to replace the
  existing server that has windows Server 2003.

  Now, the thing is customer want to transfer/migrate their client access licenses Server and Terminal Server CALs for Server 2003 to 2012 server.

  But is it possible to transfer/migration of CALs client Server 2003 to 2012?

  In the case of is not possible.
  May I suggest Windows server 2003 to install as a virtual operating system in Hyper-V
  to use their existing CAL?

  And is it as additional permit is required to use Server 2003
  Hyper-V?

  Waiting for your valuable response/solution.

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I reinstall the RTL 120 BPL file?

  Original title: rtl 120 bpl

  How can I reinstall the RTL 120 BPL file

  Rtl120.bpl file has Nothing to do with Microsoft Windows.

  It's just a B orland Precompiled Llibrary file with a third party software provider.

  File rtl120.bpl Embarcadero Technologies and is installed on your system to third party such as software packages:

  AVG (their component PC Analyzer)
  TuneUp Utilities
  Advanced System Care (ASC)
  IOBit Malware Fighter Pro

  For example, if you have installed Advanced System Care and rtl120.bpl file that is installed with it goes missing, the message may look like this:

  ASC.exe - Unable to locate component
  This application has failed to start because rtl120.bpl not found.  Reinstalling the application may fix this problem.

  There may be other third-party applications that installs the file, but if you do not provide the exact error message in its entirety person aren't going to be able to help.  And given that the file has absolutely nothing to do with Microsoft Windows, maybe nobody in the Microsoft community will be able to help you without more complete information - like the error message and that if one of these third-party applications (or those like him) you have installed.

  If the system has worked very well and now the file seems to be missing for some reason, it was probably quarantined (effectively deleted) your antivirus/antimalware unspecified software applications.  Perhaps you can also find an updated file in quarantine and he unquarantine.

  With too little information provided, you can expect only theories and speculation about what the problem is and how to fix it.

  If you have one of these types of third party applications or where the product description includes descriptive as sentences:

  cleaner, mechanic, stop at the stand, detective, doctor, heal, optimize, Inspector, clean, tune up, speed up, fix up, compact, compress, faster, power, boost, boost, gum, muncher. Click fix, instant fix, new, intuitive, errors, stops freezes, stops crashing, stop crashes, stops errors, improves, saving you money, risk free, guaranteed or any third-party program that has an icon that looks like a gear, pinion, belt holders, key, key, screwdriver or plunging arrows?

  You may need to uninstall and reinstall these applications (do what the error message).

  If you have this error and none of these products have been installed and reinstall does not help, then you must go to the support page help because the file has nothing to do with Microsoft Windows.

  You might be able to solve the problem to simply uninstall and then reinstall the distressed product (do says what that error message).