frequency spectrum not corresponding dt, noob question

Similar Questions

• Noob question: Playbooks all have the same performance?

  I know... noob question. I am to complete my first game PlayBook and before I submit the app store I wanted to make sure that hardware performance will be the same on all the playbook or will it be something because of the performance issues on a per-device basis? I hope that this will be similar to a console where you can expect stable performance. THX.

  All devices (currently) work the same in the same conditions.

  That does not mean, however, that you can treat it as a console.  A console runs only a game and nothing else (in general).

  The PlayBook can run multiple applications, and among other things, a user can 'Behavior of the Application' setting configuration Mode Showcase, default, or standby, what determines if your application runs or stops when it is idle.  If they are in window mode, they may have other things at the same time.

  To a first approximation, however, "even in the world" is probably correct, for now.  Don't forget there will be different tablets in the future, with specification different but compatible with your app... not quite like a console there where many games is basically orphaned (or requires a port) when a new generation comes out.

• Noob question: autonomous AIR .bar files?

  Sorry for the noob question, yet to learn these things from the air. When we create a .bar file, it is the only file position, does it include the runtime air, flash, etc, etc, or is it always require an accumulation of air / flash runtimes on the device? THX.

  The .bar file does not include the time of execution because the runtime is already preinstalled on the Playbook.

  Air is really integrated into the PlayBook so you don see the difference between a native app or an Air application.

• D.I. box noob question

  Hi all

  Sorry for the noob question, but I need something clear up if possible. I was about to buy a box for injection and then had a query on them, and if I actually could benefit in this scenario...

  
  Fig 1. is how I currently record.

  Fig 2. is how I would do it with di direct box

  

  My question is... in this configuration, the d.i. box would make a difference to the signal? or he would only make a difference if I was going to live guitar to box, the sound card?

  Thank you for all your help.

  In my opinion you have basically three alternatives for the recording of the guitar:

  1. get an amp excellent sound, recording with a microphone, or more, in a room of good survey.

  Challenges: you'll probably need a studio proper, or at least no neighbours, because it could become LOUD. It takes time and experience of mike a good amp and even microphones expensive (several). Result depends on the acoustics of the room more than you think.

  Another way here, is to get/build an isolation area around your amp, which will be a kind of micro studio for it, allowing you to play hard and with a good tone, but in a more controlled environment. Many advantages for this make. Unfortunately, the expense can also be 'pro' - but I don't know there are DIY solutions.

  2. record of the amp 'dry' via either its line (send FX will also) or use a ' soaking power allowing you to put the amp (some sounds so much better AMPS), but with a low volume in the room. You can connect the device of soaking directly, or give the speaker the "tame" signal and mike the amp without disturbing the neighbors that it now. Good power soaks don't come cheap (?). Dry recording, for example by not using mike, often sounds like this: dry. It depends on your style of music, but an electric guitar should probably be considered an acoustic instrument. Instead of a diaphragm in wood, it has a speaker. The sound, often, we want to achieve is an amp of good sounding in a good room, which is an acoustic sound. You simply cannot get to an exit row or direct to a soaking of output power (not president). He needs treatment.

  3 use a program like GuitarRig, Amplitube etc. No installation required, regardless of the size of the room and acoustic sound (except that the acoustics of the room always will affect listening!) or mike. The software simulates the amps, effects and even mic configurations; added the "airplane" that you will not get a direct connection. Once again, according to your style. If I were Bill Frisell or Jim Hall, i.e. anyone with an as most of their music very "naked" guitar sound, I probably does (but these guys have access to the great engineers too...), but in a pop idom / mixed rock with other instruments and certainly to do demos, that's actually what I would recommend. Especially for us space challenged who have neighbors and an infinite time either. No, you will not look like 'all the world'; It's garbage in French - garbage out as always (many are disappointed by the present, but some are happy, it is always the case)

  All you need is a sound card with an instrument of entry. If you have a * good * sound card already who is not entered instrument, you can consider a DI box. Otherwise I'd say it's redundant.

• I have not remenber my SECURITY QUESTIONED this ACC, please help me

  I have not remenber my SECURITY QUESTIONED this ACC, please help me. I have remenber login pasword.

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (143383)

• Unable to connect to facebook, do not know the secret question

  you forgot a secret question, how?

  as I start the facebook game, I really don't have e-mail account, is my friend helpme register, so I do not know the secret question, but today, I can not connect log in my facebook account and e-mail, to feel that my account is compromised, while I have not 1 get new facebook account , I try so many times still cant, then my friend tell me a few year already, he can't forget wht secret the answer filling up, so wht can I do?

  Hi limseng,

  Please see the facebook support for help.

• I got a redemption of my school code in the United States, but I couldn't use it. It shows that this card does not correspond to my Adobe ID because of problem of country or region.

  I got a redemption of my school code in the United States, but I couldn't use it. It shows that this card does not correspond to my Adobe ID because of problem of country or region.

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -html http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id.

  If you have a US redemption code, your profile must also show you in the United States

• Find invalid date and month not corresponding with the calendar

  Helllo,
  
  I want to find the line to invalid date, which do not correspond with day and month.
  
  Also, the program should capture the data if the year < 1900
  
  Thanks in advance
  
  
  
  with xx as
  (select 101 as the ID, May 24, 1899 ' than double create_date)
  Union of all the
  Select 101, 32/03/2012 "of the double
  Union of all the
  Select 102 30/02/2012 "of the double
  Union of all the
  Select 101, 29/02/2013 "of the double
  Union of all the
  Select 102, February 28, 2013 "of the double
  Union of all the
  Select 102, 24 January 2012 ' double
  Union of all the
  Select 101, ' - 11/22 / 2012 "of the double
  Union of all the
  Select 102, ' 05/42/2012 "of the double
  Union of all the
  Select 101, ' 01/72/2012 "of the double
  )
  
  Select * from xx
  

• Introduce the tool button is not available for a question slide

  When I try to insert a button using the "Insert button" icon from the toolbar, the icon "Insert button" is not available. It happened in the background and is not an option for this slide. But it is for my other slides. Can someone advise me please? I don't know what happened, but let's assume that I've done something wrong along the way.

  Thank you!

  Scott, if you look a little closer at the Lynda tutorial, what happens is that they have set up an action if the user has not replied to the question correctly. The action led them to a slide in the presentation. Note that the blade they edited after the fact (it was slide 5) was a typical shift, NOT a question slide. Thus, the option was there to insert a button.

  See you soon... Rick

• NooB question: Cup titles and a schedule of transfer

  Let's say I have tons of tracks.  In the Middle, I find I want to firm up a few seconds of footage.  I can cut, or delete the clip, but I still have to select all the following clips and make sure they move upward.  There must be a smarter way of removing a few seconds of footage and moving upward?

  Sorry for the noob question, I searched on google and didn't know what to look for.  I am open for more information that can help me to tighten my research thus.  See you soon.

  The answer will probably depend on more factors:

  Are there in your Timeline, Clips above the area of the Clip you want to Trim?

  What you want to happen to those?

  Are you only concerned to "strengthen" the Clips on the same video track where you cut, or Clips on other tracks video too?

  It is likely that the tool Edit Ripple, or Rt-click and Ripple delete, will do what you want, but who can count on the other Clips on other tracks, and video that you need.

  Good luck and please let us know a little more.

  Hunt

• WARNING: [39028] "DAC" database functions do not correspond to the default values.

  Hi guys
  
  I get after warning while I try to check the consistency of my deposit.
  
  [39028] "DAC" database functions do not correspond to the default values. This can cause problems of application.
  
  How can I get rid of this error?
  
  Thank you
  Saurabh

  Hello

  Double-click the field not in the connection pool you can click tab features

• Noob question Guides/anchors are not 'on' the object that I create

  I know that this is probably an arrangement that I don't get the sense... but here's my problem.

  When I create an object, the access/guide/anchor point path is not 'ON' the object I create... 'floats' outside this object... Instead of being on the object, like everybody else I see in tutorials, etc.

  Take a peek inside

  

  all the objects I create seem to have this... so when I try to move the two parts of the whole flag... they have a buffer zone between them... and I can not move together to overlap.

  Thanks for any help...

  I am usiing Illustrator CS6 incidentally...

  or... and it sounds silly... you are not an accountant to have a white line around the objects on a white background. as... zone "buffer", you describe. It's just a vascular accident brain, right?

• Change the Frame Rate, frequency rate not when shooting RAW

  I think not all the controls to change the frame rate independent of the frequency rate that, I guess it's like 'project frame rate '.

  How I crank out 240 fps 2 K RAW or say 60 fps (time base 23.98) during the filming of SXS?

  Follow-up to question... is there a manual for this camera accessible to the public anywhere?

  Thank you very much

  BK

  You can overcrank (once again, "S & Q" for "Slow and fast") to XAVC 1080 p at 60 fps at the moment, with firmware v1.10.

  That's all. Any other framerate 60 fps have access by setting a frequency 59,94 system and slow down the images in the post.

• Output power of the frequency spectrum

  Hello

  I have a pretty simple question. I m using the power spectrum of FFT and PSD vi. and have trouble understand output frequencies. If I understand the first line is DC-value and delta frequency then describe the following frequencies. But when I put for example in 8 points say sampling frequency of 4 Hz = 2 seconds of data to analyze, I'll be back 4 lines of data (including 0). If the first is DC, then the 2nd should be 1 / 2 Hz 1 Hz = 3rd place and 4th place = 3 / 2 Hz, but what about the frequency of 2 Hz Nyquist, why Don t I get this one? or is there something I don't understand?

  I also tried the example of Units.vi of FFT spectrum and can understand, but I still Don t get it.

  Help, please!

  Best

  Jesper

  FFT returns to power in frequency bins. The frequency of the bins is determined by the Fs (sampling frequency) divided by N (number of points), from DC (0Hz). For your case, the table returned would be:

  Bin 0: 0-0.5 Hz

  Bin 1: 0, 5 - 1 Hz

  Tray 2: 1-1.5 Hz

  Bin 3: 1.5 - 2 Hz

  So effectively Bin 3 holds the power of 1.5 to 2 Hz (which contains your Nyquist frequency).

• X 360 13-4103dx spectrum: spectrum display x 360 / its questions.

  Looking at my screen, it seems to me that if the contrast is too high.

  Adjusting through the graphics settings screen intel (intel) and lowering the contrast helped, it is now the "40" value, but I feel like he is still too high. Browns are too orange, yellow are too white. If I could drop that to 40/100 to 20/100, I think it would be a sweet spot.

  Is this a known issue? What can I do to fix this?

  Question #2, is that my sound seems to come out a 2001 flip phone rather than a > 1, 000usd for laptop, is there something wrong with them (it is another problem known, do I have to change some settings in the B & O software?

  Also, bloody ' ell! Is there a special button I push on to wake up this laptop from sleep, or is it normal to have to wait 10 seconds for the screen to go?

  The question of contrast makes me more annoyed, because I bought this laptop because of comments good screen, especially that I don't often work that requires good color reproduction.

  Hi @gaveasky,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you have recently purchased the spectrum x 360-13-4103dx and are not satisfied with the following aspects:

  1. contrast

  2. the sound

  3. response of sleep.

  You did all your Windows updates?

  Did you run the HP Support Assistant?

  Have you ran the Windows troubleshooting tool?

  Here is a link that may help with the issue of sleep hibernation:

  Computers HP - sleep and Hibernate issues (Windows, 10, 8).

  Alternatively, you can try to disable the option of quick start as helping some people:

  QuickStart - turn on or off in Windows 10 (from tenforums.com)

  Here is a link that can help with adjustment of the brightness of the screens and the contrast:

  Adjust your screen brightness and contrast (from windows.microsoft.com)

  Even if you have no sound and it is the quality that concern you, could help the following link:

  HP - no sound from speakers (10, 8 Windows) laptops.

  If tyou have concerns you may wish to consider contacting HP support for assistance. With your permission, they can connect remotely to your system to help find and overcome the difficulties.

  Please contact HP to Contact HP Supportassistance.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.