Full screen does not work after upgrade; OSX hangs

Immediately after the upgrade later El Capitan in Sierra, full function display has stopped working at the end of a disastrous. Not only can I not enter or exit the mode full screen on any application (Safari, iBooks, Terminal, etc.), but in addition, I can't event begin any application which was mode full screen before upgrade (essentially all other applications that I use on my mac). Nor can I drag-finger-three to any application full screen. OSX just hangs and displays the login screen as it has not started.

Indeed, my mac is useless now, I can't do anything with it. I tried to restart the PRAM, has tried to repair my disk, tried various 'normal' things, which none worked. Can someone help me with this?

Hello konkere,.
Thank you for using communities of Apple Support.

If I understand your message that after upgrade to macOS Sierra as your MacBook Pro doesn't work well for you. I know how it is important for your MacBook Pro to be in place and functional after the software update. Reset the PRAM and repair the disk are key steps in troubleshooting. I also recommend reinstall macOS Sierra of OS X Recovery.

How to reinstall OS X

OS X can be installed on the same version or an earlier version of Mac OS X, without deleting your data. You don't need to remove or disable the existing system first.

  1. Start of OS X Recovery now command-r immediately after start-up or that you restart your Mac. Release the keys when you see the Apple logo. Start-up is finished when you see the OS X Utilities window.
  2. If you do not want to wipe your drive before reinstalling OS X, open utility disk in OS X Utilities window, then use disk utility to erase the drive. Quit disk utility when done.
    Erase the disc is not necessary unless you're your Mac transfer to a new owner, partitioning your drive for use with Boot Camp, or attempt to solve a problem this as disk utility can't repair.
  3. Choose to reinstall OS X OS X Utilities window, and then follow the instructions on the screen.
    This installs the latest version of Mac OS X, which has already been installed on your Mac.

Best regards.

Tags: Mac OS & System Software

Similar Questions

  • Mirroring of the screen does not work after upgrade to Lollipop

    My xperia Z2 screen mirror successful 4.4.4 Android with Samsung Smart TV.

    Now after Lollipop upgrade when I try mirroring the screen I get an error message "error of mirroring. The output device supports HDCP... »

    Yesterday, I found a new software update for my TV. I went from 2102, 2105 version.

    Now, it works fine. Thanks for the suggestions.

  • mode full screen does not work when playing games, recently ive changed my os from vista to windows 7... Please help me

    Im having dell inspiron 1545 graphics Mobile Intel (r) express chipset family... I changed my os from vista to windows 7 32 bit... after the mode full screen does not work just playing games... a black bar is the view of both sides of the window... can help a whole... ???

    Hello

    I suggest you try these methods and check the status of the issue.

    Method 1:

    Update a hardware driver that is not working properly.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Download the latest driver adapter disaplay from the manufacturer's website, install on your computer and check the status of the issue.

    Inspiron 1545

    http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-1545

  • Projector does not work after upgrade from Sierra

    My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

    Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

  • Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

    My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

    Help please

    Hi asalamk,

    The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

    You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

  • Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

    My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

    Hey Buddy,

    What does it mean exactly when you say he won t work?
    You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

    At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

  • HP Laserjet 2100 does not work after upgrade Windows 10

    HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

    Thank you!

    If the printer is connected using a parallel printer cable, please see the link below for the solution.

    http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

  • Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

    Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

    My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

    Hello

    Method 1.
    Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
    http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

    I suggest updating all your drivers from the link above and drivers Realtek especially.

    Method 2. Set the default Microphone.

    Once the drivers installed to check if the microphone is the default value, here's how:

    Exercise the functions mentioned below to adjust the Microphone as default:
    1. Click Start and click on Control Panel.
    2. click on sound, then a new window will open.
    3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
    4. now check if the Microphone is listed there and right-click on it and choose activate.
    5. turn highlighted that Microphone and click "set as default".
     
    For more information see the articles below:
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
    http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

    my touch screen does not work after you download windows 8.je have a B305 lenovo all in one PC ideas?

    I downloaded the former driver of windows 7 touchscreen and it worked

  • VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

    Hello

    I upgraded the PC host, but also virtual machines to Windows Pro 10.

    TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

    Is this a known issue?

    Thank you!

    Kind regards

    Joe

    SOLVED!


    I uninstalled VMware Player, including the abolition of the configuration files.


    re-installed VMware Player and it worked!

  • Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

    After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

    Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

    Hello

    you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

    It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
    Would appreciate comments on your success.

    See you soon

  • Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

    Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

    I have thus display driver problems on 10 to win.

    For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

    The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

    I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

    It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

  • Re: Satellite L300 - camera does not work after upgrade to Win7

    As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

    There is no exclamation point in the system.

    Satellite L300 (PSLB8E)

    Hello

    What happens when you start the webcam app?
    All programs-> Toshiba-> webcam

    Did you install other 3rd software part as for example the Skype that could access the webcam?

    Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
    Start Skype for example, check the settings in Skype webcam chose correctly.

    It would be really interesting to know if the other software would be able to use the webcam.

    By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
    Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

  • Pavilion dv6 sd card reader does not work after upgrade to windows 8

    Hello

    My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop).  I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?

    Hi SanSam.

    Thank you.

    Install the driver from Realtek for Windows 8 card reader.

    Please post your results.

    Best regards
    ERICO

Maybe you are looking for

  • IPhoto unexpectedly quits when downloading project

    Hello I was wondering if someone might have any suggestions? I'm trying to download a large number of photographs of a project of iphoto from Apple in order to get their approval. I managed to create a few folders and download successfully, each of t

  • Satellite L505D - memory upgrade Possible?

    Hi all. I have laptop Satellite L505D-S5965. It has 3 GB memory DDR2 SDRAM 333 MHz. Specifications are here:http://www.CNET.com/laptops/Toshiba-Satellite-L505D-s5965/4507-3121_7-33695859.html I could install 2 times x 4 GB DDR3 800 MHz in this laptop

  • Mouse buttons go at the time of publishing

    Is there a way we could take advantage of these additional mouse buttons when you change the code in LabVIEW? I think undo - redo perhaps, anyone knows how we can adjust LabVIEW or Windows? See you soon,.

  • Delay when the frequency of a tone is changed

    Dear users of the forum, I have a problem with the generation of a signal to VFD. I do this as in the attached program. The problem is the following: When I change the frequency, it does not change immediately. There is a delay until the change can b

  • DeskJet 3510: Wifi

    Hello Society that Bell changed my Modem a few days ago, so I have a new password, of course and I wanted to "reconnect" my printer with my new password (Wifi) but it does not work, I tried several times... I don't understand! My computer is not "rec