Function execute() SqlDataAccess resulting in the memory not freed calls

Similar Questions

• Satellite L655-11J - result of the memory of the Windows experience index

  The results are
  Processor: 6.9
  Memory RAM: 5.9
  Graphics: 6.7
  G game: 6.7
  Hard disk: 5.9 Toshiba mk5059GSXP

  The result of the memory is too low?

  Hey,.

  Why is the result of memory too low? The score is still good scores even other parts are better.

  In addition, the Windows experience index is not important in my opinion. You can see a few numbers at the end, but what to do with it? I don't see a reason to make such a test if I convinced and satisfied with my computer. Who care about these things other landmarks? ;)

• HP Probook 440 2 How to change the BIOS to work around the memory not supported the start-up message

  Hi everyone, first I would like to say that I find the list of operating system for the less "interesting".

  Now, I bought a G2 to replace my 4441S.

  The problem is that the momory I had gave me a message as "memory not supported."

  very well, I bought new memory, same problem with 2 brands, so I it's maybe because I bought 'normal' memory and not DDR3l?

  The thing is that I need this memory quickly and I can't find DDR3L, now I use corsair Vengeance and I need more on the lan function but this message that allow me to use the computer if I press on enter, have no countdown with option by default and no BIOS settings so I want to change that and either add a timeout that starts the laptop or just disable this message , because it works, I use it now.

  I need that until I can find the DDR3L.

  Thank you.

  You don't seem to understand how it works with primary and secondary memory voltage settings schedule and bus. the laptop BIOS ROM file includes settings in its encoding of the memory modules that meet the compatibility requirements. If you install memory that has not been tested for compatibility, so it will not work or even it seems to work, it will be unstable.

  A BIOS of the laptop is quite unlike a BIOS that is present in a motherboard level amateur games. There are no timings adjustable and tensions to the timings of the memory or bus in a laptop BIOS BIOS standard voltages. It actually is to protect the owners from themselves.  You "do not 1.5 and 1.35. You can't change the setting of the voltage on the bus to do anything other than what is defined in the BIOS. If you install the module memory does not accept the voltage set by the BIOS code, then you are simply out of luck.

  Check out the BIOS Modding forums if you want to see what options may be made available.

• Results of the stage not listed is not in the report

  Hello. New to TestStand. I appointed a string value test which compares the serial number USE by using RunState.Root.Locals.UUT.SerialNumber. However, when the report is generated, I don't see any results of the step. This only happens with this sequence and not with any of the tutorials. Can someone point me in the right direction for that. Thank you.

  go to Edition > sequence properties...

  Uncheck the box that says: disable result record for all stages

  Not sure how that checked, but it shouldn't be for MainSequence.

  Hope this helps,

• The functionality Execute Disable No. run CPU is not enabled for this machine.

  Hi all!

  After my first installation of ESX 4.0.0 build 164009 on a HP Proliant BL680c G5 (2CPUs - 40 GB Mem), I get the usual screen with the HTTP host address and the stuff of Alt - F1 and Alt - F11, but at the bottom, in red, I get the following error:

  TSC: cpu0:0 1246869) Init: 461: the CPU Execute Disable/No run function is not enabled for this machine.

  I think I must change this setting somewhere in the BIOS, but I can find it. This BL was originally installed with W2k3-32-bit, which was pushed from an Altiris console. think the PSP usually "optimize" some parameters depending on the operating system must be installed.

  All ideas

  Hello

  I would also enable the Intel-VT if it is not already in your BIOS. It is always very good check that your BIOS settings are correct for ESX. HP should have a white paper or documentation with the appropriate settings.

  So far enable for Intel HP systems based on my list includes:

  Intel VT

  No execution

  If YOU select an OS type select Windows NOT Linux.

  Best regards

  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.virtualizationpractice.comvirtualization practical analyst [url]
  "Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: securing the virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• results of the page not allowed - URGENT

  Hello
  
  I have a search of certain search criteria 3-4 page wth...
  
  When we enter the search criteria, the results properly...
  
  but we have a need that when we enter any search criteria no results should be retrieved...
  
  Problem now is that suppose I do a ssearch share some search criteria... I get the results...
  
  not if I do a search again without giving any search criteria, it is always get all the old documents of the previous search...
  
  Please let me know how to solve this problem...
  
  
  IM-paste query here... CO.
  
  Import oracle.apps.fnd.common.MessageToken;
  Import oracle.apps.fnd.common.VersionInfo;
  Import oracle.apps.fnd.framework.OAException;
  Import oracle.apps.fnd.framework.webui.OAControllerImpl;
  Import oracle.apps.fnd.framework.webui.OADataBoundValueViewObject;
  Import oracle.apps.fnd.framework.webui.OAPageContext;
  Import oracle.apps.fnd.framework.webui.beans.OAImageBean;
  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;
  Import oracle.apps.fnd.framework.webui.beans.form.OASubmitButtonBean;
  Import oracle.apps.fnd.framework.webui.beans.layout.OAQueryBean;
  Import oracle.apps.fnd.framework.webui.beans.table.OATableBean;
  Import oracle.apps.fnd.framework.OAApplicationModule;
  Import oracle.apps.fnd.framework.OAViewObject;
  
  Import oracle.cabo.ui.data.BoundValue;
  Import oracle.cabo.ui.data.bind.ConcatBoundValue;
  Import oracle.cabo.ui.data.bind.FixedBoundValue;
  /**
  * Controller for...
  */
  SerializableAttribute public class XxchrGenPERSearchCO extends OAControllerImpl
  {
  public static final String RCS_ID = "$Header$";
  public static final boolean RCS_ID_RECORDED =
  VersionInfo.recordClassVersion (RCS_ID, "packagename %");
  
  /**
  * Layout and logical configuration for a region page.
  @param pageContext OA page context
  @param webBean the grain of web for the region
  */
  ' Public Sub processRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  super.processRequest (pageContext, webBean);
  }
  
  /**
  * How to manage remittances form for form elements in
  * a region.
  @param pageContext OA page context
  @param webBean the grain of web for the region
  */
  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  
  super.processFormRequest (pageContext, webBean);
  
  OAApplicationModule am = pageContext.getApplicationModule (webBean);
  OAViewObject vo = (OAViewObject) am.findViewObject ("XxchrGenPERSearchVO1");
  OAQueryBean queryBean = (OAQueryBean) webBean.findChildRecursive ("ResultRN");
  
  String idGo = queryBean.getGoButtonName ();
  
  Go OASubmitButtonBean = (OASubmitButtonBean) queryBean.findChildRecursive (idGo);
  
  if(Go!=null)
  {
  String Firstname = pageContext.getParameter ("Firstname");
  System.out.println (FirstName);
  System.out.println (PageContext.GetParameter (queryBean.getGoButtonName ()));
  
  String Lastname = pageContext.getParameter ("Lastname");
  String Preferredname = pageContext.getParameter ("Preferredname");
  String Emailaddress = pageContext.getParameter ("Emailaddress");
  String Empnumber = pageContext.getParameter ("Empnumber");
  
  If (FirstName.Equals("") & & Lastname.equals("") & & Preferredname.equals("") & & Emailaddress.equals("") & & Empnumber.equals(""))
  {
  OAApplicationModule am = pageContext.getApplicationModule (webBean);
  String message = "Atleast a search criteria should be entered" + "!";
  throw new OAException (message, OAException.INFORMATION);
  }
  
  VO. ClearCache();
  
  
  }
  
  am.invokeMethod ("refresh");
  
  } //If
  }
  
  
  Kind regards
  Preeti

  Hopefully this code will help you get no data when the parameter is null. You should check these null avoid
  NullPointerException.

  If (FirstName.Equals("") & Lastname.equals("") & Preferredname.equals("") & Emailaddress.equals("") & Empnumber.equals(""))
  {

  headerVO.clearCache ();
  headerVO.setWhereClause (null);
  headerVO.setWhereClauseParams (null);
  headerVO.setWhereClause ("1 = 2");
  headerVO.executeQuery ();
  }

  Thank you, Ronald

• Entrust - prepare the data not being called Service?

  Hello

  I have an activity assign tasks, with a profile of Action that defines a data Service prepare.  For the prepared data service, I just created a simple process, and I record it.

  When the task of the legal successor is known, the process of preparation of data Service is not executed.  Nothing is recorded.

  I have to do something else?

  I'm under LC ES2 SP2

  Note: if I use a process for preparing data on a starting point of Task Manager, it works fine.  It works just for an activity to assign tasks.

  Thank you

  Hello

  By default, the check box to run the data prepare during the stage of service user is disabled.

  Go to the Presentation tab & data at the service of the user.
  If you have selected a profile of Action that specifies a process for preparing the data, you will see 3 check boxes in the section: specify when to prepare the settings carried out works
  Check 'the user opens the task' and it will now run the data to prepare for the service of the user.

  Note: This is unchecked by default so that all data is entered at the stage of starting point are not replaced at the user stage.
  It is the responsibility of the designer of reduction process of all data that you don't want not overridden when loading data to prepare.

  Diana

• How the memory of airconditioning in InDesign.

  Hi all

  We develop an extension for Adobe InDesign and after several months of development, that we're still stuck with various things we do not find a solution for them. Extension exports a lot of images, texts, create new pages, basically, we export all content in a document as long as 300 to 400 pages in various goods, JPG and PNG formats. So really memory consumes

  When executing the extension, we have developed, the main thread is bloqued and the InDesign does not and if the export we do is really great it blocks just about InDesign. We would like to release memory after each page is complete, but we cannot do it. Once the full export is complete, then the memory is freed, but not when you export that happens

  We export the memory increases more and more without letting go of anything, we tried various options, but looks like we never come to free the memory that everything is blocked

  How can free us the memory while the extension is running? Or y at - it a way to stop the extension of each iteration, then it frees the memory?

  We use the extensions Manager and flash builder.

  Thank you!

  Caesar.

  Welcome,

  It really depends on your code Cero, but for example if you have a car or while loop that goes for hundreds of cycles, you can eliminate down to smaller portions and loop of blocking a thread during execution, that means each while/for loop is an application of single process no matter how large or intense it would be It must be done before this CPU core/thread accepts another request, but if you break to two cycles, thread will be released by the first query and taken over by the other (overlap cpu can decide what priorities and performs tasks of short, high priority before arriving to work on the second loop). again, this depends on your needs and your code, but for example to break a loop 100 time in 10 x 10, you can do:

  var arrayLength = 100;
  
  /*Before:*/
  for (var i = arrayLength - 1; i >= 0; i--) {
      exportThePage(i);
  };
  
  /*After:*/
  var breakPoint = 10;
  var neededCycles = arrayLength / breakPoint; //obviously you need to improve these aspects since it breaks if you have 103 cycles for example!
  var currentCycle = 0;
  function loopBreaker(){
      if(breakPoint < arrayLength && currentCycle <= neededCycles){
          currentCycle++;
          mainLoop(currentCycle);
      } else if (breakPoint >= arrayLength) {
          alert('no need for me! just call a simple loop!')
      } else {
          alert('Im done here!');
      }
  
  }
  function mainLoop(currentCycle){
      for (var i = breakPoint - 1; i >= 0; i--) {
          exportThePage((breakPoint * (currentCycle - 1)) + i);
          alert('just finished workin on page: '+(breakPoint * (currentCycle - 1)) + i);
      }
      loopBreaker();
  }
  

  Now, I didn't have the chance to test this in all (I may be able to test it tomorrow at the University) (Edit: not surprisingly, there was a small error I fixed), in addition it makes it harder to do such a thing in extendScript in absence of javascript of calendar events, but I guess it will work if the process of exporting your page is heavy enough to prevent this code through a chimney overflow error (in the case otherwise you need to increase the variable breakpoint, or use a short sleep period or you don't just it really), I also hope not to have an error of syntax here so please re - check yourself.

  On the use of GC it may (or may not) solve your problem of memory, but plus help certainly not all on your cpu load, it is preferable to reuse objects and not to destroy them every time.

  PS: Oh I forgot to say, but there's no need really to mention you want to modify and adapt on cause of code it will break easily if you have 103 pages for example, instead of 100, I just wanted to show one of the approaches I think

  hope this helps and gl.

  m,

• How to see the fn:trace() results in the newspaper and/or console workshop?

  Hello, all.
  So, I'm a new in ODSI, in advance, my excuse to basic questions.
  
  I would use the fn:trace () function. However, the following code does not send information either on AdminServer.log or Wokshop console. What is the reason?
  
  declare the procedure tns:test() {}
  declare $timeBefore as XS: date: = fn:current-date();
  FN: trace($timeBefore, "My First test"); -> How to see the trace output?
  Returns the value $timeBefore.
  };
  
  Here's what I have in the console AdminServer.log and workshop:
  
  common/application {}
  user: weblogic
  name: testCase2
  EventKind: update
  Server: AdminServer
  }
  
  performance of the query / {}
  compiletime: 93
  }
  
  common, session, request, invocation {}
  time: Tue may 25 15:41:12 IDT 2010
  Duration: 0
  }
  
  Update/service {}
  procedure: test
  arity: 0
  DataService: ld:Logical/over_files/testCase_OverFiles.ds
  script: declare ns0 namespace = "" ld: logic/over_files/testCase_OverFiles ";"
  {return value ns0:test() ;}
  }
  
  {/ common time signature}
  timestamp: Tue may 25 15:41:12 IDT 2010
  Duration: 93
  }
  
  Best regards
  Yuri.
  
  Edited by: ygauchma may 25, 2010 05:59

  Because I'm not over your shoulder, it must be very clear on what you tried.

  Your first post show you a procedure using the trace. Well, I tried this, and instructions (ODSI set to debug and WLS logging of debug level log level) and it worked. Have you tried that? Doing a job?

  Now you're showing a function. Have you tried setting log levels?

  Where are you looking for results? The will NOT in the Console for ODSI Studio Test view (I guess that's where you're looking). They will be in the WLS log file if you have configured the log WLS-> Log level = debug file. They will be in the WLS (stdout/stderr) console if you have configured this Log level = debug.

  I believe that the trace function is implementation specific, then there is no such thing as a generic example.

  -Mike

• 'System Exec' output in the same window that called

  Hello

  I have a complicated program, but let me break it down to what matters.

  My labVIEW (exe) application is called by the command prompt. Does some calculations based on arguments that I passed to him.

  The thing that I do not quite understand, is how to export the results in the same command line that called. (Not a new window) I'm hoping to run my program in the background, and if I'm hoping to avoid something fancy and you want just the results in the same window that called it.

  Any help would be greatly appreciated.

  Kind regards

  Nyne

  It is not really an easy way to do it. On Windows, you have several options:

  • Try to use the Windows API commands to the Console (never really had much luck with these).
  • Use the console .NET class (I doubt that it works).
  • Use a trick I had suggested to copy text from the console just paste text directly into the console window. Joined a VI that does this. Note that it is 8.2 so I am unable to connect the cluster of error due to a bug in 8.2.

• The term 'Select-Object-property' is not recognized as a cmdlet, function, script file or executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

  I have a fairly new version of PowerCLI (5,5 Rel 1) 5.5 being ESXi and vCenter.

  I also checked that automation. Core is installed:

  PowerCLI C:\Windows\system32 > Get-PSSnapin VMware.VimAutomation.Core

  Name: VMware.VimAutomation.Core

  PSVersion: 2.0

  Description: This Windows PowerShell snap-in contains the Windows PowerShell cmdlet

  TS of vSphere management.

  but after connecting to vCenter, I get error trying to run:

  PowerCLI C:\Windows\system32 > $Results = ForEach ($DRSRule to $DRSRules)

  > > {}

  > > «|» Select-Object-Property @{N = 'Cluster'; E = {(Id-vue-Get $DRSRule.Clust)}

  amplifier. {{ID). name}}.

  > > @{N = "Name"; {E = {$DRSRule.Name}}.

  > > @{N = "enabled"; {E = {$DRSRule.Enabled}}.

  > > @{N = 'Type of DRS'; {E = {$DRSRule.KeepTogether}}.

  > > @{N = "MV"; E = {$VMIds = $DRSRule.VMIds - split ","}

  > > $VMs = ForEach ($VMId to $VMIds)

  > > {}

  > > (Get-View-Id $VMId). Name

  {> >}

  {{> > $VMs - join ","}}

  {> >}

  > >

  The term 'Select-Object-property' is not recognized as a cmdlet, fu

  function, script file or executable program. Check the spelling of the name, or if

  a path was included, make sure the path is correct and try again.

  On line: 3 char: 32

  +     "" | Select-Object-Property < < < < @{N = 'Cluster'; E = {(Get-view-Id $DRSRule

  . {{Cluster.Id). name}}.

  + CategoryInfo: ObjectNotFound: (Select-Object-property string :)

  [], CommandNotFoundException

  + FullyQualifiedErrorId: CommandNotFoundException

  PowerCLI C:\Windows\system32 > Add-PSSnapin VMware.VimAutomation.Core

  Is ' Select-Object-Property not installed?  If not, where I get it, please?

  see you soon

  KC

  Note, I received this Dean here code: PowerCLI: extraction rules DRS; Deans blog

  There should be a space between the - Property parameter and Select-Object

• PLSQL function to return the result of the query

  Dear all,

  Oracle Database SE1 11.2.0.1

  I need to create a plsql function which should accept SQL as a parameter, execute it and return the result set.

  Is this possible?

  Madhu.149 wrote:

  I need to create a plsql function which should accept SQL as a parameter, execute it and return the result set.

  Be careful - results games indicate a set of data stored in memory. This is not what are sliders. This isn't how Oracle should be used.

  Imagine that you implement such a result set function - which, on average, requires 1 MB of memory (private server) to store the results of the SQL query. A 100 users mean a 100 MB of memory required server. This is not suitable. Not at all. Never.

  The correct back 'thing' is a handle to SQL cursor (called a ref cursor in this case). A SQL cursor is a "program" - that the appellant runs via the fetch command and generates one or more lines accordingly. Appellant repeatedly runs this slider through calls to fetch until this slider found and returns all rows affected (using consistent readings).

  If you want an abstraction interface that the client can call via PL/SQL code in the database, so this crafting optimal SQL interface, creates the SQL cursor and returns the handle of the cursor (via the ref cursor data type) to the client.

• The memory could not be written

  Hello. I have two PCs running ask for 3d stuff. A machine is an i7, an AMD. We have a N-vidia a ATI graphics card. We have 16G RAM, the other 8.
  We run to W7 pro the other W7 Home premium. What they have in common, is that they have both run Posers Firefly, FFR renderer on the network. Either you let ask rendered your image or you ask the other machine to do. Anyway. I got this program for a while that an everything worked smoothly until a Saturday two weeks ago. Just after the last batch of updates. The two machine comes with an application when rendering error. "The memory could not be written.
  Changes in system only facts during this period was the updates so I am convinced that something touched something and so on.
  It is said expressly: "FFRender64.exe - Application error the instruction at 0x402a9546 referenced memory at 0x000001a0. the memory could not be written. Click OK to terminate the program"
  Could someone please find something? and don't forget TWO machines, brands of TWO GPU CPU TWO brands, TWO brands of MB and still the same problem!
  Dick Andersson

  Hello

  To help you with your query, we'd like to know what version of Windows are you using?

  Please click on this link to download and run the Hardware Troubleshooter.

  If the troubleshooter does not solve the problem, please follow these methods below:

  Method 1: Perform the clean boot

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in Windows.

  Please click on this link to learn how to perform the clean boot.

  Note: Please see: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Method 2: Run the System File Checker

  Make sure you backup your personal files all exists before running the auditor of the filesystem in the event of HARD disk failure.

  1. Type cmd in the charm of the research.
  2. Prompt, right click then click on run as administrator.
  3. Copy and paste the following command in your command-line prompt: sfc / scannow
  4. Press enter to execute the command. It may take a few minutes to complete. If you find 100% full verification, click X to close the command prompt.
  5. Restart the PC for the changes to take effect.

  Let us know the result.

• The instruction at "0x7c9105f8" referenced memory at "0x08c60010". The memory could not be 'read'.___Click on OK to terminate the program.

  My problem is that whenever I try to open a game, I get the error message that

  "The instruction at"0x7c9105f8"referenced memory at"0x08c60010". The memory could not be "read".

  Click on OK to terminate the program. »

  and I have to close the program.

  Hi Dani,

  1. who is the edition of Windows that is installed on the computer?
  2. what game you try to play?

  Try these steps and check the result.
  Step 1: Run the memory diagnostic tool
  a. see diagnosis of problems of memory on your computer
  b. Once you correct the errors, check if the problem persists.

  Step 2: Check the game sellers website to see if there are updates or patches for the game and install it.

  Step 3: If the problem persists, uninstall and reinstall the game and then check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Multi-function generation creates code that calls releases the memory it has no allocate

  Generation of a panel based on our ActiveX component generates the code below.

  My problem is that it is free memory that it does not allocate - a bad programming practice. The user must allocate a buffer for testFilePath, but this method releases.

  Problem is known by a side effect of this:

  http://digital.NI.com/public.nsf/allkb/205CA72511BC735C862570F80019660A?OpenDocument

  John Barton

  ----------------------------------

  HRESULT CVIFUNC XJIntegrationOCX__XJIntegrationSetTestSystem (CAObjHandle objectHandle,
  ERRORINFO * errorInfo.
                                                                char * testFilePath,.
  VBOOL * arg2)
  {
  __Result HRESULT = S_OK;
  XJIntegrationOCX__XJIntegration_Interface * __vtblIFacePtr = 0;
  int __didAddRef;
  int __errorInfoPresent = 0;
  BSTR testFilePath__AutoType = 0;
  VBOOL arg2__Temp;

  __caErrChk (CA_CStringToBSTR (* testFilePath, & testFilePath__AutoType));

  __caErrChk (CA_GetInterfaceFromObjHandle (objectHandle,
  & XJIntegrationOCX_IID__XJIntegration,
  0, & __vtblIFacePtr, & __didAddRef));
  __caErrChk (__vtblIFacePtr-> lpVtbl-> SetTestSystem_ (__vtblIFacePtr,
  & testFilePath__AutoType,
  (& arg2__Temp));

  If (testFilePath)
  {
          CA_FreeMemory (* testFilePath);
  * testFilePath = 0;
  }
  If (testFilePath)
  __caErrChk (CA_BSTRGetCString (testFilePath__AutoType, testFilePath));
  If (arg2)
  {
  * arg2 = arg2__Temp;
  }

  Error:
  CA_FreeBSTR (testFilePath__AutoType);
  If (__vtblIFacePtr & __didAddRef)
  __vtblIFacePtr-> lpVtbl-> Release (__vtblIFacePtr);
  If (FAILED (__result))
  {
  If (testFilePath)
  {
  CA_FreeMemory (* testFilePath);
  * testFilePath = 0;
  }
  }
  CA_FillErrorInfoEx (objectHandle, & XJIntegrationOCX_IID__XJIntegration,
  __result, errorInfo, & __errorInfoPresent);
  If (__errorInfoPresent)
  __result = DISP_E_EXCEPTION;
  Return __result;
  }

  Hi John,.

  This parameter is supposed to be an output parameter? If so, so that the code looks right to me. The function expects a string to pass, and then returns a different string via the same parameter. In this case, by the rules of the ActiveX, the method releases the original string after using it, and then allocates a new string. The only difference between a typical ActiveX interface and this wrapper CVI is that with a typical ActiveX interface it would operate the BStr strings instead of the C strings.

  Because the function redistributes the buffer after the release of whatever you spend, you should not change this buffer memory management in client code. The hope is that you allocate memory initially, then call this function and then free the memory some time after the return of this function. The fact that this function of reallocation of memory at the same time should not affect this process.

  If you use invalid free question, a couple of things to watch are that: 1) when you allocate memory initially, you do not use a different allocater, such as malloc in the C library, for example. If you need to allocate explicit memory, you must use CA_AllocMemory, which is what the ActiveX library and 2) that you don't have multiple references to this pointer that could potentially be released several times.

  Luis