Function iPod "repeat artist."

Similar Questions

• CVI 2013 SP1 - function calls repeated with pointer on a variable array parameter causes a shift of the index

  I have some functions will be pointers as parameter and CVI 2012 SP1, they work as before without problems but with CVI 2013 SP1 they are now incorrect.

  Here the description of what is happening - I found a cure, but a duty adopt the old code and I think it's clear that nobody don't "captures" all lines in a 'big old code' which are affected (maybe):

  I have functions

  'function_XYZ(int *p_paraArr) '.

  with 'p_paraArr' as pointers on a table (int).

  Suppose I have another function

  "fct_TOP (void)".

  where is a local array variable which is inizialized by

  "int TheArray [25] = {0};

  and inside of this "TOP"-function-body I call a function ".

  "function_XYZ (TheArray).

  There are no complains of the compiler (CVI 2012 or 2013) and the code works (but the CVI 2013 only once!).

  But if I put 'fct_TOP' loop I have a lag in the "TheArray' -memory.  (The loop surrounds the function "TOP"! "")

  This means that the result "TheArray" obtained from "function_XYZ (TheArray)" starts at index '1' not on the index '0' - as the first time that the function "function_XYZ (TheArray)" was performed. ".

  The solution is:

  I only replaced

  "function_XYZ (TheArray)" (<1>)

  by

  "function_XYZ (&(TheArray[0]))" (<2>)

  overall the program now works every time (in the whole loop)-the first time (in the loop).

  In the second version (<2>) everything is necessary to "work well":

  The '&' and parentheses "(...)", which contains the element that may be designated by the '& '.

  And I hope that you believe me: I've tested several times, it was only "little" change that solved the problem.

  So it seems that the ICB 2013 (SP1) is a kind of internal offset index by a repeated execution of the

  "function_XYZ (TheArray).

  but I don't know how or why but I see in debug mode by observing the expected against the values in the table received!

  At the first time the (implicit) internal index of 'TheArray' is '0', but the following times (during the execution of the loop) the internal index passes to '1' (seen in the debugger because that all the expected values were shiftet like that!).

  So there's an explicit index in the table ("function_XYZ (&(TheArray[0]))") necessary to make the first time of this clear code execution.

  There are some good improvements in 2013 CVI (SP1) and I like this environment more than the 2012 version - but:

  There are other "changes" also, in the compiler (or linker...?) that are more rigid than "in ancient times.

  The problem of this kind of error is always the 'old code '!

  It is expected of such behavior.

  The compiler/linker do not complain (a complaint would be good!) writing but he made this mistake (in a loop).

  By the way: my 'compilation Options' are set to 'Extended' (without change in the "..." ("- button - Options) and that all of the boxes, except the" OpenMP_support "-box are checked!"» So I think that I put the very rigid compiler - maybe there are some «...» ' - button - settings to get rid of this problem, but I have not found them/it.

  My request:

  -Check the stiffer compiler by the need of an explicit index

  - or switch to the 'old' behavior with "function_XYZ (TheArray)" always refers to implicit index '0' of the element "TheArray". "."

  Thank you for your messages, comments and suggestions.

  -As I wrote before - maybe it's the style of programming or error"self made"... maybe...
  .. But if I replace 'function_XYZ (TheArray)' by "function_XYZ (&(TheArray[0]))" and
  then it works... Why so and not, if bothe the same? ...

  But as long as I do not post sample code, nobody is going to accept - I accept it. So consider this post more as an allusion to the fact that of the LW/CVI 2012-2013 LW/CVI more changed than just the LW - GUI or certain features: the compiler changed its 'way to'... or almost.

  For this problem, I think that I will use the solution 'use no implicit and explicit pointers'.
  Who should be a good idea taking into account
      http://forums.NI.com/T5/LabWindows-CVI/fatal-run-time-error-dereference-of-out-of-bounds-pointer/TD-...

  mybe also only caused by wrong code... who knows... but for me it is a sufficient reason to act as I suggest above.

  Best regards,
  F.

• Lenovo function keys repeatedly scoped it in PC games

  I added a few games to my E520 (under Win 7 Prof), but I noticed on all the various games, when graphic screens kicking, (any game), so made a repetitive spontaneous activation of the lenovo function keys.

  Specifically, it seemed that controls brightness (f7, f8) would spontaneously be high value at the bottom, apparently at random, a beep with each change.   The brightness of the screen black and white bar would flash, beep and then repeat, possibly with a new value, to infinity.    I was not in contact with the controls.    The common factor only was a game which came in its graphic video mode.     If the game had not yet changed the video mode of the down payment, then there's not had any effect.    Leaving the rematch in video mode of the game desktop mode also stopped the lenovo feature key bug if it was active.

  What happens and how can I solve the problem, and if it cannot be resolved, then how can I temporarily disable lenovo function keys?     I suspect the PC games, I tested also mapped key controls function and somehow during their office to vote triggered the lenovo feature keys application.    Nevertheless, the ultimate reason, I need a solution to workaround or difficulty.

  
  

• iPod Classic 7th gen Shuffle play Question

  A week ago, I was playing random songs on my iPod through shuffle. Today, I used shuffle and the same exact songs to play in the same order of a week ago... The iPod's battery die since then, so it was restarted. I find it weird that this happened. I was just checking to see if anyone has had a similar experience. This is not the first time that I've lived this BTW.

  Thank you.

  Under certain conditions, I can cause my iPod repeat a sequence of songs in shuffle mode. For example, if the third or fourth in a sequence random song and I press the "back" button a few times to return to the first song, repeat the sequence.

  Consider this:

  random playback of the songs actually means "to randomly choose another song", and yet it is in fact very difficult for the same a real computer to generate a random number because computers operate on a regular and predictable. Even if an iPod is a computer, it is nowhere near as capable as a full specification and I suspect that the mixed songs are actually a hidden playlist (or two), who (s) get updated when the iPod is synced with iTunes. It could explain why some users report seeing the same songs being synced over and over again, even though they have not played against them.

  Even if I say 'playlist', it is more likely to be a list of numbers, stored on the iPod that are used to select the next song "at random".

  So this isn't a bug, it's just a limitation of the power of an iPod. Are two things that you can do (well, three actually!);

  1. When you use the iPod, start your random game with a different song. The first song was a 'number' and this number dictates what "random" list is used. Every list is different.
  2. Sync your iPod with iTunes frequently as this will be the time that hidden on the iPod playlists are revised.
  3. Accept the status quo. (Okay, I'm being facetious...)

  It is a theory so I may be wrong, or even be shot down in flames (but only by more experienced contributors), but I don't think that this will never change as iPod Classic software is unlikely to be updated now.

• Computer crashes and repeated pixels to display on screen

  I have a laptop HP 3 years (windows xp) that was freezing after use of one hour of Pandora on firefox (sounded like he was constantly running all the time).  It got progressively worse (more frequent and longer periods of time) and a gel started toward the top with internet explorer, even with no pandora.  Now, I can't use the computer for more than 10 minutes before it freezes.  Gel = no key functions and repeated scatter of the same pixels on the screen.  I'm a little computer-illiterate, can someone tell me if this is a hardware problem or potential software and if there is anything I can do about it?  I have a feeling if I try to reformat it won't get anywhere before it crashes again.

  Thanks in advance!

  do a full scan BC

  There may be a conflict between some programs.

  do a system restore to a better time.

  formatting and reloading your operating system are a last resort, not a first.

  more

  http://www.DroidForums.NET/forum/tech-issues-bug-reports-suggestions/78863-Pandora-freezing-up.html

• Set up as a Repeater

  I am looking for your help and advice on the creation of one of my as a Repeater access points.

  Aim of project: to access my laptop in my backyard about 50 meters from my Repeater. The Repeater is inside my house, the signal must pass through 2 sets of walls (normal wooden construction with normal drywall).

  I have two access points to the choice as my root;

  • LinkSys WRT160N
  • LinkSys WRT54GS, model V 7

  I have two devices that I can use as a Repeater:

  • Aironet 1200 (1231 G-A-K9)
  • LinkSys WRT54G-V8
  1. The drawback with LinkSys WRT54G-V8, is there not any installation configuration integrated as a Repeater. Please advise / guide me what software do I need to get to establish it as a Repeater?
  2. Fortunately, the Aironet 1200 (1231 G-A-K9) has setup configuration integrated as a Repeater. I did the following configuration, but it does not work. Please help me to make it work:

  Root:

  SSID: Tango

  IP: 192.168.1.1/255.255.255.0

  Default gateway: 192.168.1.1

  MAC: 00.1E. E5.64.75.5F

  Data encryption / authentication settings, etc.: all open, to make it simple.

  Repeater:

  SSID: Tango2

  IP address: 192.168.1.22/255.255.255.0

  Default gateway: 192.168.1.1

  Role in the Radio network: Repeater non-root (default: root Access Point)

  Please guide me as I found the advanced internal radio for AP Radio Page menu.

  In this menu, under Preferred Access Point 1, I need to put the MAC address: 00.1E. E5.64.75.5F

  Force Infrastructure devices to associate only with the SSID: default

  Do I need to configure another parameter such as channel number, etc.?

  Thank you for your time and your consideration.

  Routers Linksys function as Repeater.

  You can only use a WAP54G as a Repeater for a WRT54G.

• Looping/repetition, one a number of times function

  Is it possible to do a loop function acivate / repeatedly a number of times? For example, if I have a function that activates when the entire creation of my application is there a way to keep activating a number of times or maybe permanently?

  So, if I had the following "charging function I made in my creationComplete of my application tag property how do I do this several times in loop or indeed permanently:-"

  creationComplete = "load()" "

  The reason I need it is charge function takes screenshots of the html components and their product in the form of images in my application, but html containers take awhile to load their content, so it takes a while for that to happen sometimes so obviously I need this function to repeat for a while until content is loaded.

  A simple way is to use a for loop and call your function of any number of times. You can use a while(1>0) If you want it to run continuously.

  BUT

  These 2 solutions are ugly and you may not use them. Never. And nor should anyone.

  If you just wait a while before taking your screenshot, use the setTimeOut method instead:

  import flash.utils.setTimeout;
  
  public function load():void {
       setTimeOut( takeScreenshot , 1000 );
  }
  
  private function takeScreenshot():void {
       // do whatever you need to take your screenshot (content of your previous load method)
  }
  

  I hope this helps.

  EDIT:

  Oops, just checked and Adobe recommends not to use setTimeOut more with AS3, instead, you must use the Timer class:

  import flash.utils.Timer;
  
  public function load():void {
       var timer:Timer = new Timer( 60000 , 1 ); // will wait 1x60000 ms = 1 min
       timer.addEventListener( TimerEvent.TIMER_COMPLETE , takeScreenshot );
       timer.start();
  }
  private function takeScreenshot( event:TimerEvent ):void {
       // do whatever you need to take your screenshot (content of your previous load method)
  }
  

• Using repeat with... in... Loops with lists of properties

  I am using a loop "repeat the operation with the variable in the list" with a list of properties where properties are symbols, but it doesn't seem to work; It falls right through the loop. Exactly the same code works when passed a list of properties where properties are integers.
  
  Of after the description of function AW7 repeat with in:
  

  Quote:
  Repeat with X in the list repeats the instructions in the loop with each of the elements in a list. Each time through the loop, the function sets the next item in the list or the following in a property value to the specified variable. As Authorware estimated the list with each pass through the loop, the instructions that modify the list inside the body of the repetition can affect the loop. Authorware maintains a reference to the list of origin for the duration of the loop. This means that the list persists at least for the duration of the loop.
  Syntax:
  Repeat the operation with the variable in the list
  (s)
  end repeat

• REPT with spaces

  Hi all.

  I'm trying to use the Pages repeat a number a number of times, with a space between each repetition.

  For example:

  A, B AND C

  1 15 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

  2 6 2 2 2 2 2 2

  3 6 3 3 3 3 3 3

  4 7 4 4 4 4 4 4 4

  5 8 5 5 5 5 5 5 5 5

  I managed to use the REPT function to repeat the number without a space, but I can't seem to find a way to insert spaces. Here is where I am at the moment:

  

  Here's the file Dropbox:

  https://www.dropbox.com/s/ke76qdtpmmv6au9/quantities.numbers?DL=0

  Can anyone help?

  Thank you.

  Hey Danny,

  Is that what you're after?

  

  Formula in D1 (fill down)

  = REPT(A1&"",B1)

  Thanks for the link Dropbox. That made it easy!

  Kind regards

  Ian.

• How to simplify the code to generate custom error codes and messages

  I designed a vi that generates the error when any data entry is missing, it works correctly, but the problem is that I want to simplify, because it is part of the main program and its block diagram is great to use as such (I tried to use this vi as a Subvi in the main program, but that does not work correctly) so I need help to simplify the code or if there is no other better medium to generate the error message.

  Hello

  As shown in the previous example, to a different question of yours, it is always good to reduce with diagrams of huge block with repeated code.

  When you overwrite functionality even repeated several times, put it in a loop and run it to have recurrences of 4 or 5 of the same code.

  It will be evolving in the future.

  joined the vi changed for you.

  Note: when you want to simplify your program, isolate your code in functions, put each function inside a under vi.

  in your case, you can have the control to an empty string for all channels within a Subvi. build an array of strings and go through the subvi. Control in the sub that VI is that strings are empty.

  an array of Boolean output error. build your error string in another under vi. the wires together.

• How can I change the Art of the track in Windows Media Player?

  I know how to change the album art and I already fixed, but tracks have individual art, designed by the artist, and I want those on their respective titles. I messed around with Windows Media Player for a little bit, but I like the still have not found anything useful.

  I really want this art of the track on my tracks, because it is very important to me.

  Hi NoelleFay,

  I know exactly what you mean, but I don't think that WMP allows this function because most artist do not include only cd art of track individual art.

  I advise you to search/post this question in the forum of Experts of Windows.

  There, the developers of real media meet to solve issues advanced like this.

  Hope this helps,

  B Eddie

• Import the chain programmatically to reentrant VI

  I'm working on a multi-language application that includes a reentrant VI. I managed to import a file of strings not reentrant screw, but seem to have problems with import of channels in a reentrant VI. I'm basically calling the VI environment dynamically in a loop (opened VI ref, import a file string, run VI). The first iteration is error-free, but after that it returns the error code 1000.

  I know that the import of channels function does not run when the VI works and that's why I get this error, but my VI is returning and a set of pre-allocate clone for each instance. This behavior is expected when using the import of channels function while repeatedly calling a reentrant VI? If so, is there a work around this issue?

  Thank you

  Cristian

  (With the help of LabVIEW 9.0f2)

  
  

• I tried with windows update and manually to download vista service pack 2, but these two don't

  I tried with windows update and manually download vistal SP2 but fails both: the process takes time and when download reaches 100% there is a message that says that the file is corrupted in the disk, I tried to check readers for bad mistakes, too, but the same problem persists.

  It may be a corrupted catalog file.  However, it can also be a corrupted system file.  In the latter case, the System File Checker may be able to fix it.  Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane.  Select run as administrator.  When the cmd window type "sfc/scannow" at the prompt and press ENTER.  When the scan is finished, close the cmd window.  Alternatively, you can try to install clean or safe mode boot mode.  See

  http://support.Microsoft.com/kb/331796

  The procedure should work the same for Windows 7 and Vista.

  Enter the Mode safe mode by starting the cold computer and pressing the key function F8 repeatedly as soon as the manufacturer splash screen appears.

• Fuzzy or without printing.

  My printer leaves a blurred impression with many words and missing lines. The paper is correct 80mg. All the maintenance functions tried repeatedly and with new correct model Kodak ink cartridges.

  Such a resolution can reside with the support of Kodak or their FAQ for this printer model

• How can I fix logout problem on Windows 8

  After I have my windows 8 has been set high-contrast disconnecting from the computer on me, and since then it keeps disconnecting every time time I login

  Like any other user?

  Yes
  But I've already fixed the problem; Heres how I did it

  Step 1

  The computer must be started in safe mode. The newspaper / lock screen click on the point of power at lower right. Press SHIFT while clicking on restart. Go wrong with shooting, then Advanced, Windows startup settings , then restart, and follow the instructions to start your PC in safe/safe mode with networking mode.

  Step 2

  Connect to the account, then press Win + R, type msconfig. Go to the services tab.

  Step 3

  To the lower right click disable all , and then restart the PC.

  Step 4

  The PC should start normally (not in safe mode).

  Sign in to your account. NOTES following services disabled, that the PC will be fully functional. Repeat steps 2 & 3, but on the contrary all the Services.