GeForce 8800GT

Similar Questions

• GeForce 8800gts, PSU and a Dell Dimension E510

  I'm not an expert on the material, so I'll try and do that as clear as possible.

  I have a system Dell Dimension E510, running a P4 3.0Ghz and 2.5 GB of RAM. I am looking to update my graphics at a Geforce 8800 card or an 8600.

  I confirmed I have plenty of room for the 8800 card to fit my motherboard, but I am more concerned about my diet.

  Now I looked around this forum for a definet response. Most argued that the stock of POWER Dell 305 block w is able to run a 8800 with no problems, while others were not so sure, he could and recommended that they improve their power supply to an Antec, since its been proven that they work with the E510.

  I know that this has been asked before in the past and I'm sorry, but I just want absolute course before buying it, will be a run on the PSU E510 Geforce 8800? I don't plan on overclocking the card or something like that.

  
  

• HP Compaq DC7800 small form Fa: Nvidia GeForce 8800 GT 512 MB vs. HP Compaq DC7800 Small Form Factor

  Hello

  I'm not too familiar with the hardware upgrades, so I wonder if a Nvidia GeForce 8800 GT 512 MB would be compatible with my HP Compaq DC7800 Small Form Factor?

  Thanks for any help!

  Hello:

  Here is the link to the plug for the GeForce 8800GT...

  http://www.GeForce.com/hardware/desktop-GPUs/GeForce-8800-GT/specifications

  Certainly, this card will not work in your machine for two reasons.

  1. he needs a power outlet extra that doesn't have food dc7800.

  2. the draw of the power of the card (105W), is too much for the PCIe x 16 slot 25W prorated and 240W power your PC.

  These PCs is designed for light desktop for administration.

  If you want to add a video card, it must be a down a profile that comes with low profile brackets in the area.

  I recommend the AMD HD 6450 or Nvidia GT-610 low profile cards that will work within the limits of the power supply of your PC has.

• Processor or graphics card for the best HD video in the Web?

  I use a Mac Pro (early 2008) 2x3.2 GHz Quad Core Intel Xeon. I bought it used from a computer store.

  The graphics card is NVIDIA GeForce 8800GT 512MB.

  My memory is 20GB 800 MHz etc etc.

  I'm on Yosemite 10.10.5, using 6.0.5 FCP (Final Cut Studio 2)

  I shoot HD 1920 x 1080.

  I notice the game back in the looks really rough canvas so I used the computer for all other applications prior to use of the CPF.

  It is smooth only when I use first of the PCF after the computer starts. Sometimes, when I reboot, it will be good but soon begins to become unstable again.

  I'm not sure if it's because my computer is not fast enough? strong enough? Do I need a faster processor or better video card?

  I guess the memory isn't the question after reading other topics. But I have not found a topic that addresses this issue.

  Advice appreciated. Thank you.

  20 GB is an odd number. Your RAM should be installed in multiples of 4. 4 GB, 8 GB, 16 GB, 32 GB.  Although I do not know if what matters a lot. You have a lot of RAM, because the FCP uses only 4 GB max.

  The issue could be the fact that you run FCP 6 on an unsupported operating system.  The latest OS supporting FCP 6 was 10.5. FCP 7 last supported on 10.6.8... since then updated all the BONES do not take into account legacy CPF work into account.  You are 5 OS versions past version full support, so the application does not work as well as it would on an operating system supported.

  Now... you say you shoot HD 1920 x 1080... you convert when you bring it in FCP? What codec is when you cut it? And this drive it is stored on? Logged how?

• Card Zotac video Mac Pro 1.1

  Mac Pro 1.1 8 GB Ram Zotac GeForce 8800GT video card

  I just bought a Zotac card to replace my 7300GT dead card. Installation, start the computer (can hear the chime) but nothing on the card. I've read about flashing video cards, but how can I do this without screen on my Mac?

  Thank you

  In general, you need a PC with windows.

  https://www.YouTube.com/watch?v=yQb31njJdlE

  http://www.Apple-art.com/Mac-Pro-1-1-10-9-2-Tiamo-graphic-card-Suggestions_10913 908 - 9.html

  http://forums.HEXUS.NET/Apple-Mac/133400-Mac-Pro-8800GT-upgrade-BIOS-Flash-mod.h tml

  Note that some links may not work because of a temporary problem with this forum. If this is the case Google for:

  Zotac GeForce 8800GT Flash for mac video card

• Elite M9200T blocking

  I got this computer since May 2008. Last night, he started locking up. The mouse pointer still moves, but nothing does. The task manager would not come to the top. After the reboot of the machine would be fine for 25 to 30 minutes, then I hear a rattling noise and the computer crashes again.

  Specifications are:

  Intel Core Duo (3.0 GHZ) processor

  4GB DDR2 - 800 MHZ

  512MB NVidia GEForce 8800GT

  500 GB at 7200 RPM / MIN SATA 3 GB/S hard drive

  Thank you I backed up the files now and go buy the HP recovery discs and get a new HD.

• The computer then hangs in Safari

  I'm running an early 2008 Mac Pro with OS 10.10.5

  For some time now, mainly during the use of Facebook in Safari, my computer hangs to the top in the following way: the screen developed large rectangular areas of areas (apparently) frozen at random, colors, symbols, etc.. The cursor moves during a short period of time, and sometimes there are times close Safari and regain normal functioning long enough to restart. Other times, the entire system will lock and I have to do a hard restart using the power button.

  This took place through to many OS updates, trashes preferably, power draw and cache purges. My first thought is that it is the graphics card (NVIDIA GeForce 8800GT 512 MB), but if that's the case, why is it mainly using Facebook in Safari? I enclose the latest report of Kernel Panic for someone out there who might be able to shed some light on this.

  Panic report *.

  panic (the appellant 2 cpu 0xffffff7f9a880bb4): NVRM [0 / 2:0:0]: error reading 0x0061002c: CFG 0x060210de 0 x 00100406 0 x 92000000 BAR0 0 x 92000000 0xffffff81cb8cd000 0x092100a2, D0, P1/2

  Backtrace (2 CPU), Frame: Return address

  0xffffff81ca3d3bc0: 0xffffff8019b2ad21

  0xffffff81ca3d3c40: 0xffffff7f9a880bb4

  0xffffff81ca3d3d00: 0xffffff7f9ab9678d

  0xffffff81ca3d3d40: 0xffffff7f9ab2191c

  0xffffff81ca3d3d60: 0xffffff7f9a91e54b

  0xffffff81ca3d3d80: 0xffffff7f9a9c1a43

  0xffffff81ca3d3e00: 0xffffff7f9a868c4e

  0xffffff81ca3d3ec0: 0xffffff7f9a836845

  0xffffff81ca3d3f00: 0xffffff8019b5d6d9

  0xffffff81ca3d3fb0: 0xffffff8019c116e7

  Extensions of core in backtrace:

  com.apple.nvidia.classic.NVDAResmanTesla (10.0) [796AE430-39FB-3255-8161-D52AFA28 EE2B]@0xffffff7f9a830000-> 0xffffff7f9aa99fff

  dependency: com.apple.iokit.IOPCIFamily (2.9) [05578B0B-C99C-3A87-9F3E-B4746D19CEF4] @ 7f9a324000 0xffffff

  dependency: ffff7f9a820000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [7372D580-6DDE-3457-B043-49B8447FC9D2]

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f9a7d9000

  com.apple.nvidia.classic.NVDANV50HalTesla (10.0) [7FE40648-F15F-3E18-91E2-FDDDF4C DA355]@0xffffff7f9aaa4000-> 0xffffff7f9ad4dfff

  dependency: com.apple.nvidia.classic.NVDAResmanTesla (10.0.0) [796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f9a830000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [05578B0B-C99C-3A87-9F3E-B4746D19CEF4] @ 7f9a324000 0xffffff

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  14F1605

  Kernel version:

  14.5.0 Darwin kernel version: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Slide kernel: 0 x 0000000019800000

  Text of core base: 0xffffff8019a00000

  Text __HIB base: 0xffffff8019900000

  Name of system model: MacPro3, 1 (Mac-F42C88C8)

  Availability of the system in nanoseconds: 7132517874705

  last load kext to 1146075512528: com.apple.filesystems.exfat 1.4 (addr 0xffffff7f9bea4000, size 65536)

  Finally unloaded kext to 1597505987851: com.apple.filesystems.exfat 1.4 (addr 0xffffff7f9bea4000 size 57344)

  kexts responsible:

  com SiliconImage.driver.Si3132 1.2.5

  com Apple.filesystems.msdosfs 1.10

  com.apple.driver.AppleHWSensor 1.9.5d0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleBluetoothMultitouch 85.3

  com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleHDA 272.18.3

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AudioAUUC 1.70

  com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.GeForceTesla 10.0.0

  1.1.9 com.apple.driver.AppleMCEDriver

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.driver.AppleLPC 1.7.3

  com.apple.driver.AppleUSBDisplays 372.1

  com.apple.driver.Oxford_Semi 3.5.5

  com.apple.iokit.SCSITaskUserClient 3.7.5

  com.apple.driver.XsanFilter 404

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 36

  com.apple.driver.AppleIntel8254XEthernet 3.1.4b1

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AppleIntelPIIXATA 2.5.1

  com.apple.driver.AppleUSBEHCI 705.4.14

  com.apple.driver.AppleUSBUHCI 656.4.1

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  com.apple.driver.IOBluetoothHIDDriver 4.3.6f3

  com.apple.driver.AppleMultitouchDriver 264,6

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.18.3

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.driver.AppleHDAController 272.18.3

  com.apple.iokit.IOHDAFamily 272.18.3

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.iokit.IOSurface 97.4

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.iokit.IOBluetoothFamily 4.3.6f3

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleSMC 3.1.9

  com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.nvidia.classic.NVDAResmanTesla 10.0.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.driver.AppleUSBAudio 295.23

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleUSBHIDKeyboard 176,2

  com.apple.driver.AppleHIDKeyboard 176,2

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.iokit.IOUSBHIDDriverPM 710.4.7

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

  com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1

  com.apple.iokit.IOFireWireSBP2 4.2.7

  com.apple.iokit.IOUSBMassStorageClass 3.7.2

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

  com.apple.iokit.IOBDStorageFamily 1.7

  com.apple.iokit.IODVDStorageFamily 1.7.1

  com.apple.iokit.IOCDStorageFamily 1.7.1

  com.apple.iokit.IOATAPIProtocolTransport 3.5.0

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.iokit.IOSCSIParallelFamily 3.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  com.apple.iokit.IOAHCIFamily 2.7.5

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IOATAFamily 2.5.3

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 398

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.corecrypto 1.0

  com Apple.KEC.pthread 1

  Model: MacPro3, 1, MP31.006C.B05 of BootROM, 8 processors Quad - Core Intel Xeon, 2.8 GHz, 14FR, MSC 1.25f4

  Graphics card: NVIDIA GeForce 8800 GT, NVIDIA GeForce 8800 GT, PCIe, 512 MB

  Memory module: DIMM Riser B/DIMM 1, 2 GB FB-DIMM DDR2, 667 MHz, 0x0000, 0 x 000000463732353642363145353830304600

  Memory module: DIMM Riser B/DIMM 2, 2 GB FB-DIMM DDR2, 667 MHz, 0x0000, 0 x 000000463732353642363145353830304600

  Memory module: DIMM Riser A/DIMM 1, 1 GB FB-DIMM DDR2, 667 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335

  Memory module: DIMM Riser A/DIMM 2, 1 GB FB-DIMM DDR2, 667 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335

  Memory module: DIMM Riser B/DIMM 3, 4 GB FB-DIMM DDR2, 667 MHz, 0x02BA, 0 x 202020202020202020202020202020202020

  Memory module: DIMM Riser B/DIMM 4, 4 GB FB-DIMM DDR2, 667 MHz, 0x02BA, 0 x 202020202020202020202020202020202020

  Bluetooth: Version 4.3.6f3 16238, 3 services, 26 aircraft, 1 incoming serial ports

  Service network: Ethernet 1, Ethernet, en0

  PCI card: NVIDIA GeForce 8800 GT, view controller, Slot-1

  PCI card: 0 x 0000000000, another mass storage controller, slot-3

  Serial ATA Device: ST31000528AS, 1 TB

  Serial ATA Device: WDC WD10EAVS-00D7B1, 1 TB

  Serial ATA Device: TOSHIBA MD04ACA500, 5 TB

  Serial ATA Device: ST2000DM001-1ER164, 2 TB

  Parallel ATA Device: PIONEER DVD - RW DVR-112D

  SCSI device: Equipment of SCSI target @ 0

  USB device: Hub

  USB device: Dynex Webcam 1.3MP

  USB device: Hub

  USB device: USB printer

  USB device: Hub

  USB device: USB card reader

  USB device: CTE - 450

  USB device: Apple Cinema Display

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: Hub

  USB device: My book 1230

  USB device: Apple Cinema Display

  USB device: USB mass storage device

  USB Device: USB Bluetooth host controller

  FireWire devices: built-in_hub, up to 800 Mb/s

  FireWire device: OEM ATA Device 00, G-TECH, up to 800 Mb/s

  FireWire devices: unknown_device, unknown

  Crush Bus:

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Pavilion a1620e: Athlon 64 X 2 does not not with Mo A8M2N-(Nodus3) in the a1620e Pavilion

  Hello

  Pavilion a1620e (MB A8M2N-(NodusM3) with the following improvements:)

  RAM - 3 GB

  POWER 600 watt PSU

  GeForce 8800GTS

  Works well with WIN 7 64 bit.

  I want to upgrade the processor and like HP saying the Council is good for an Athlon 64 X 2 5000 + I tried one, but the computer refused to start - just constant high-speed fan and no other answer.

  My bios version is the 3.07 original. I would try 3.10 or 5.02, but it does not seem possible to download them.

  Any ideas would be appreciated.

  Thank you.

  OK
  It took a while, but now I have an AMD Athlon 64 x 2 5000 + to work in my HP Pavilion a1620e computer. After having no success with the original Windsor ((ADA5000IAA5CS) I bought a Brisbane (ADO5000IAA5DO) on Ebay for 5 euros and phenomena inside.
  
  All the research I did suggested the Brisbane does not work on the MB A8M2N-(Nodus3), but to my surprise the machine has started AND has been recognized by the BIOS. To test, I had just reinstalled the original 3500 + HSF and it was not long before that Core Temp indicated that the CPU became powerful hot so I turned off and order an ARCTIC Freezer 7 Pro Rev 2 HSF from Amazon. It is significantly larger than the stock of 3500 + HSF and I wasn't sure if it would fit in the case of a1620e, but it doesn't - come.
  
  It is easier to adjust by first removing the power supply (I found that it was possible to slide over the body in the way which rather than loose all their components wiring caps), then loosely tying the two tiny hold the SH screw brackets before attempting to fix in position. Once the heatsink in place the fan simply clips on it. Fan socket on the MB is three-pin, the Arctic Freezer 7 fan is four pins, but it fits the correct MB decision-making. The extra pin is for PWM speed control, but MB controls the speed of the fan very well without it.
  
  The new HSF runs much quieter than the original and control the temperature of 5000 + perfectly. I'm writing this Core Temp shows #0 27 C Core and Core #1 34 C, with a max since the start (an hour earlier) 41 & 50 respectively.
  
  Obviously, the new processor is faster than the old single 3500 + and worth it, if a power supply upgrade is, I think, required. The stock power supply was sorely lacking and I exchanged for a Watt ATX 630, which seems to do good with my Geforce 8800GTS and the new processor graphics card.
  
  I noticed that the computer CPU assembling start-up can freeze occasionally and need to be restarted. Once restarted it works fine. Usually only happens once, if at all and so far I have not found a problem.
  
  Also, I had the opportunity to examine under a glass strong mag Windsor 5000 + who did not later. One of the external pins had broken. It was almost impossible to see with the naked eye. He could well the reason why it did not work, so don't give up on Windsor if you have the A8M2N-(Nodus3), just avoid the Brisbane either. There are loads of Brisbane ADO5000IAA5DO go cheap over there and we could work just for you.
  
  A final remark on another subject: I do not know if a member of the staff of HP take the trouble to read these forums (probably not!) but since the beginning of my research, many of the useful pages of HP customer service have disappeared from their website and redirected to a page of "Welcome to HP customer support" useless. In fact, for those of us with older computers HP does no service the customer at all. I have two HP computers: a Pavilion a1620e (the subject of this post) and a workstation XW4600. They will be the latest products from HP that I will buy. The XW4600 is still supported, probably because it has been sold for commercial application. Small vintage, produced for the individual products are not. I can understand HP did not want to spend money on the updates to the bios, etc. of these older products, but to remove all references to them shows a cynical disregard for a customer who, if they make sense, now will never buy an HP product again. Shame on you HP!

• Compaq Presario SR5414UK Graphics Card + PSU

  Hello

  I have a Compaq Presario SR5414UK now and you want to add a nVidia Geforce 8800GTS which me curreently running on the integrated graphics card. To do this, I apparently up to my diet because I have 300 watts and need from 400 to run this card. The 500W model it would be sufficient to run the card and in addition to my PC?

  http://www.Maplin.co.UK/module.aspx?moduleno=221195

  If this is not the case, I need to run this card that would fit in my current PC.

  Thanks in advance.

  P.s. Please note I live in England and therefore need a place that is delivered to, preferably with the lowest possible cost if shipping overseas is inevitable.

  Message edited by Wolvorn on 01/31/2009 07:17
  Message edited by Wolvorn on 01/31/2009 07:20

  Yes, 500 watts would do very well.

  Sean

  HP employee

• [Vista] Office Elite video 9090it driver

  I tried to update video card driver from the NVidia site.

  This computer, Elite 9090it, get a GeForce 8800GTS.

  After the update, the computer stopped working.

  Can you tell me if the only videodrivers this computer accepts that on HP site - obsolete real, since they are 2 years old.

  Thank you.

  EPD, the driver from the nVidia website should work without any problems.  Have you tried to use "Option 2"when you search for the correct driver? ".  This option has always worked for me.

  I suggest the connection from the monitor to the VGA connector in the back plate.  You may need to use an adapter.  This should allow the computer to boot.  Once it has started, you must remove the nVidia Driver.  Then use "Driver Sweeper" to remove the remains of it.  Be sure to follow the instructions for DS carefully.  Once the driver is then deleted, download and install the latest driver from nVidia website.  I hope it will work for you.

  Let us know what happens.

• HP Pavilion 15 laptop: upgrade cpu

  I want to improve my prccessor for the games, but I have no idea where to start, I know not where to buy one, or which is not compatible with my computer. Right now I have an AMD A8 - 6410 APU with AMD Radeon R5 Graphics 2 .00GHz. Please help me, I really need a better processor.

  Thank you

  Lily

  Here are the minimum requirements:

  http://www.systemrequirementslab.com/CYRI/requirements/call-of-duty-black-o/11439?p=r

  CPU:

  Intel Core 2 Duo E8200 2.66 GHz or AMD Phenom X 3 8750 2.4 GHz

  Processor speed:

  Info

  RAM:

  2 GB for 32-bit OS and 4 GB for 64-bit operating system

  OPERATING SYSTEM:

  Windows Vista SP2 or Windows 7

  Video card:

  NVIDIA GeForce 8800GT 512 MB or ATI Radeon HD 3870 512 MB

  Your processor is easily as strong as a Core 2 Duo E8200. The video is your weakness. There's really nothing you can do to improve. The video is soldered to the motherboard.

• Windows Vista update, constantly offering the same updates

  Well, the title of my post was just to make things seem worse than they really are. But I think it's a bug, not less.

  I just installed Windows Security Essentials. "Windows Update" keeps me showing that there are both updates optional available through the installation of "Windows Security Essentials". They are updated definition for this software. They are two 3.7 MB. KB, KB2310138, numbers are both the same, but the details see the numbers of different virus definition. The definition of a 1.97.1086.0 and the other is 1.97.840.0. If I install one updates it installs correctly and everything is fine, except that Microsoft Update tells me there is 1 additional optional upgrade for me to install which is annoying and misleading. If I install "both" the KB2310138 updated simultaneously or in succession he confused Windows Update all together and go back to square 1 saying that there is 'optional' 2 updates I can install it. I don't know what is happening, but there is definitely a bug in the middle of all this chaos.

  Maybe someone could tell me if these "Windows Security Essentials" definition updates are cumulative, so that if you later you don't need all the updates of prior definition or are non-cumulative? Thank you.

  * original ugly bug title - Windows Vista Home Basic Update - Microsoft has not yet discovered *.

  System configuration: Ultimate, card mother Gigabyte GA-EP45-UD3L Winndows 7, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC - 1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard

  See...

  Microsoft Eessentials (MSE) definitions/Signatures FAQ security update
  http://social.answers.Microsoft.com/forums/en-us/mseupdate/thread/74e507b8-f6da-4ECA-8CE7-d1aca7d3f1ba

  Why the definition for MSE updates considered OPTIONAL updates?
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/b5594cea-93b4-4320-8cbb-edc59a0948cc

  Long story, short version: ignore updates of definitions offered by Windows Update. Properly installed, MSE will be auto-updated itself about once every 24 hours.

  Additional references:

  Checklist for installation of Microsoft Security Essentials
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

  Should I have any other antivirus software and Microsoft Security Essentials?
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/09/08/do-i-need-both-Microsoft-security-essentials-and-another-antivirus-software-program.aspx

  List of [anti-virus and anti-malware] tools cleaning/uninstall program
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91

  You will find the MSE in favor in these forums: http://social.answers.microsoft.com/Forums/en-US/category/mse

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updates, mainly updates, which are manually downloaded and installed see the square Windows XP - > Control Panel - > Add / Remove programs. ?

  Updates, mainly critical updates, which are downloaded and installed manually appear actually Windows XP-> Control Panel-> Add / Remove programs. I use NO automatic update of Windows. I run a batch file to install more than 20 + critical updates, but none of them are showing up for me in the list "Add / Remove Programs". Yes, I have the check box 'Show updates' checked. System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard

  Yes. They should display Control Panel Add or remove.

  TaurArian [MVP] 2005-2010 - Update Services

• When Microsoft will release SP1 for Windows 7?

  I'm curious as to the criteria that Microsoft uses to determine where they should go out a certain Service Pack for their operating systems.  IM counting 43 updates already installed for my OS to Windows 7 and this OS is officially released less than a month. Im not here to complain the number of patches. Its impressive speed at which they release security patches when they occur. But my complaint would be more to have to download and individually install all these fixes in the future, if I were ever a reason any. Once again, what my question is, when can we expect the first Service Pack 1 for Windows 7, and what criteria are going to Microsoft during this decision to release a Service Pack?

  P.S. For the record I think that its sad that Microsoft does not release a Service Pack 4 for Windows XP. IM already on Windows 7, but many people don't. Even if the system fades into history, it all seems like the right thing to do given the number of a security updates for the operating system from the SP3. System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard

  Hi BradleyA,

  Thanks for visiting Microsoft answers CommunityForum!

  First of all, I want to thank you for your valuable suggestion. From now on, there is no information about the release of Service pack 1 for Windows 7. The same will be be intimidated through updates.

  However, incase if you want more information, please visit the below mentioned link:

  http://support.Microsoft.com

  You can also post your query to:

  https://input.Microsoft.com/scenarios/home.aspx

  I hope this helps!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• What is the best way to create a custom Windows XP slipstreamed CD so that I can install fees and be perfectly up-to-date on security updates at the end of the installation?

  I have Windows XP SP3 OEM CD. I want to use to create a 'new' Windows XP OEM CD slipstreamed which would include at each update published security for XP since Service Pack 3. After researching this project for a bit, I noticed that an unholy amount of security updates have been released since Service Pack 3. My main question is how can I get all these security updates without having to monotonous download each individually? Or is this the only way? Is there a website that is legitimate and can be trusted who was respected and compressed these updates of security in a single file that can be downloaded? How can I incorporate these security updates? It is even possible to integrate these security updates or would they simply be performed one after the other during the installation of Windows XP?

  System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard

  Click here and discover the info, it's the best out there

  http://unattended.MSFN.org/unattended.XP/