General information

Similar Questions

• How can I use the REST API to get general information of the user (Signature fields)?

  I'm trying to use the API to get the signature of all the users of the system fields. I can see this information in the web browser if I go to settings-> user management-> and selecting the user.

  I would like to know if there is a way to get the information General information (Signature fields) using the API.

  Thank you!

  Hi Sai,

  The REST API exposes the user records (see the following document); However, signature fields are not included. We need to work on this addition to the API (in a later version), but the option is currently not available.

  Please let me know if you have any questions or would like more information.

  Thank you

  Fred

• General information about the file?

  Dear everyone who works with Adobe and enjoy

  I have this question for a project in Adobe Indesign. I worked for several weeks with a magazine, and that is the question: can I know how many days and hours I deal with this? Where can I find it? I clicked on the file and looked at properties, but nothing.

  Yours sincerely Stig Morterud of Norway

  I know, but it could help rebuild a time table when how long the work was done with this document, as well as other documents queue information.

• DPS General information

  Hello

  I have a few rather generic doubts about the service:

  Is there a restriction on the content? What I mean by this question is that, just as with iBooks author you must have a complete project of interactive content to not be rejected, DPS has a similar limitation? Moreover, there is no limitation to the content? I'd start a publication for a company, which would be mainly to corporate information was updated every month.

  -Once you buy a DPS account (whether single, business or professional), I have to wait until I can start transmitting things? Also, once I have send the project to Adobe, how long does it take to post?

  I know these are questions rudiemntary, but I was unable to find appropriate answers.

  Thank you all for your help.

  Best regards

  Xavier Dominguez

  Hi Xavier,.

  Adobe do no validation or place restrictions on your content. The market that you submit your request to the fact. If you send to Apple then your content to meet their application needs to store rules and regulations. Ditto for Amazon, GooglePlay and Windows Store.

  Once you have your account with Adobe, you can publish your content. The application for display, it is subject to delays in review for the market until it's available for your readers to download. This could be anywhere from one day to two weeks, depending on the market.

  Neil

• Pavilion 13 X 360: Map of his general information

  Why the computer does not have 2 audio devices.  It lists the "High Definition Audio Device" and "Realtek High Definition Audio" as the two course of activation.  Is this correct?

  My problem is when I'm recording audio, I can not read the audio data without disconnecting the input device (USB turntable).  I use the "Audacity Project" software to record and edit my old LPs Vinyl

  Hello:

  The other (high definition Audio Device) device is useless without a HDMI cable that is connected to a TV or other equipment with a HDMI input.

  That's it, it's good, because it is part of the HDMI graphics output.

  The realtek HD audio is embedded speakers, etc.

  I guess with the Realtek HD audio, you can't do one or the other (reading or recording).

  I can tell you that somehow I had put my Realtek audio system integrated into the folder once and had no sound and I had no idea what went wrong.

  I thought that my audio chip is dead.

• General information on the desktop disappeared

  When restarting a computer the background image disappeared. How can I restore it

  When restarting a computer the background image disappeared. How can I restore it

  Hey grlizz

  You can try to do a system restore before the problem

  in the links below is advice on how to do a system restore

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  have a great festive season

  Walter, the time zone traveller

• General information about licensing of the "Microsoft Windows 7 Ultimate, Version full (PC DVD)"

  Hello

  I've never had to buy a Windows DVD facility before so my questions may seem a bit Basic.

  I intend to buy a copy of 'Microsoft Windows 7 Ultimate', full Version (PC DVD) from Amazon. (I think I should be clear of a counterfeit product, if I buy direct from Amazon).

  Am I right in thinking that if I buy this product so I can install it on several PC as long as I have installed it on more than one PC at a time?

  Really I intend to install first to my current PC, familiarize yourself with Windows 7 and then, finally, just abandon my old PC, buy a new and then install Windows 7 on this new PC. Is it possible for me to do it without breaking the terms of licenses for this product?

  Finally, (assuming I have reason to think that it is normal to do so) is there something I should do that I could not be aware of the transfer Windows 7 from my old PC to a new? I think I mean it's OK to me to erase the hard drive from the old PC before binning - and which supports Windows 7, having already been installed on this PC?

  Hello

  I've never had to buy a Windows DVD facility before so my questions may seem a bit Basic.

  I intend to buy a copy of 'Microsoft Windows 7 Ultimate', full Version (PC DVD) from Amazon. (I think I should be clear of a counterfeit product, if I buy direct from Amazon).

  You shouldn't have a problem if his continuous from Amazon.

  Am I right in thinking that if I buy this product so I can install it on several PC as long as I have installed it on more than one PC at a time?

  As long as Windows 7 is installed on one PC at a time, Yes, you can uninstall it from the computer you install it 1st on and re - install on another PC.

  Really I intend to install first to my current PC, familiarize yourself with Windows 7 and then, finally, just abandon my old PC, buy a new and then install Windows 7 on this new PC. Is it possible for me to do it without breaking the terms of licenses for this product?

  Before abandon you the old PC, delete the Windows 7 partition and you will not have a license problem.

  Finally, (assuming I have reason to think that it is normal to do so) is there something I should do that I could not be aware of the transfer Windows 7 from my old PC to a new? I think I mean it's OK to me to erase the hard drive from the old PC before binning - and which supports Windows 7, having already been installed on this PC?

  Freeing your product key for use on the new PC, but because the key has already been used once (your 1st PC / old), you need to activate by phone after installing it on the new PC.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• General information of vSphere (Beginner)

  Hello guys,.

  I am to evaluate vSphere 5 (not update1, currently version 469512) to migrate our current environment of XenServer to VMware, but I did not understand certain aspects:

  vCenter, ok, it must be used to configure the Cluster/HA and other things (from XenServer there are a lot of novelty, but actually I just need vMotion/FT). I sent the unit created a center of data then Cluster and add two hosts (two HP DL465G5), imported from the VMs (also a convert from Citrix) and vMotion works like a charm (much better than XenServer!). What happen if vCenter (in my case VM) die? HA/vMotion and other feature on the hosts still work? Or I need to have the vCenter always up and running? The currently vCenter device can support most recent version of vSphere without updating (e.g. update1 or other patches)? Or I need a physical server to install dedicated Server vCenter?

  Second thing: patches... I've seen a lot of patch, and I want to try to update the two hosts to do a bit of experience. In my case (which I've read on the documents) esxcli-install should be track... because I can not install vSphere Update Manager. But for example if I want to install the patch ESXi500-201112001 should I need to also install the plu patch or are included in the last?

  Third thing: RDM. We want to move towards vSphere also mapping a LUN directly to a virtual computer, it is possible and still give capabilities of vMotion/FT? On our Xen environment we use iSCSI to access SAN Lun, but we want to use CF (MPIO supported?) now, can be possible with vSphere?

  Last thing: in this evaluation, I used storage NetApp 2240-4 and EMC CX3-20 storage. If I leave plugged the CX LUN (which does not support ALUA) esxi hosts will have a LONG boot which should result from the second track of EMC which give a lot of i/o error. It is possible to use this storage on vSphere 5 too if it is not supported (and avoid start-up journal times)?

  Hope someone can answer my question

  Thank you very much!

  Assuming that you have correctly configured HA and it works, it does not depend on vCenter being available for work. You can test the HA feature by pulling the plug on one of the guests and see if she switches correctly.

  You can check the interoperability matrices for compatibility between vCenter and hosts, but you should be fine with versions of point update.

  A physical server is not required for vCenter, and many administrators prefer to have virtual vCenter. The Windows version of vCenter has more features currently Linux-based appliance. Update Manager is the simplest and most effective method to apply the patches.

  vMotion is supported for RDM in physical and virtual mode. Virtual mode is supported with FT, but physical mode is not. Fiber Channel is fully supported.

• Generali information

  Ciao Ragazzi,.

  Sono al mio primo con commented VM ware e devo say che nella mia testa it e più surname altro che installare su VM I wanted a pc per fare delle prove my sul sito ufficiale, sono una cinquantina di download e non capisce quale sia difference tra him varies versioni.

  MI chiedevo to qualcuno mi potesse dare some delucidazioni in merito e magari indicarmi versione migliore per installarlo sul mio desktop pc.

  Grazie

  SE he tuo desktop Linux o Windows you can use VMware Workstation 8 e be e MAC devi usare merger, both ti permettono di creare macchine virtuali VM. Questo e a buon punto di departure.

• Home General Information IDM 9.1.0.2

  Hello
  My question is very timely:
  As I can run in the background xlStartServer.sh
  
  Thank you

  Yes, you can...

  Try xlStartServer.sh &

  Thank you
  TK

• General information on recompiling and giving grants

  I must refresh 4 users in a database.
  USERA, USERB, USERC, USERD
  
  I've fallen USERA firstly, recreated, given grants and then ran the import, he succeeded with warnings.
  
  
  Then I dropped USERB, recreated and flinched grants, grant has no that was given to the VIEW v1 to USERA. I checked views USERA to that view was in invalid state.
  
  I ran the import without this grant now, once the import is complete, I will recompile WEAR and then give this grant to USERB and then recompile USERB.
  
  
  This approach is correct?
  
  -Karan

  grants = y, the entire purpose of the privileges of this user related imports.

  If you give grants = n, then any privilege will be imported.

  You can give all sorts of subsidies at the end of the import.

  Concerning
  Asif Kabir

• General information about catproc.sql

  Dear administrators,
  
  Could you please give me an idea on the script catproc and where it should be used.
  
  Thanks in advance

  In most cases, it should be used when the database is created. Executes it after you've built a database will cause most of the objects in your database to be invalidated. It should be run during the creation process of your database for usable data.

  It creates items that are stored in the sys and system schemas and used to make the database works.

  It makes good reading, but do not run after the creation of your database it unless you really know what you are doing and why. It will make you a lot of extra work.

• Where can I find good general information on the migration of the data?

  I need to move about 120 GB of data to my Oracle8i Enterprise Edition Release 8.1.7.4.0 - Server 64-bit for a new Microsoft SQL server 2005 64-bit.
  
  What is the best way to obtain these data through?
  
  Thank you.

  Please see if the following is of no help to you:

  http://sqlug.be/blogs/por_dentro_sql/archive/2006/10/24/379.aspx

• How long the registration process generally takes for principal apple

  I signed up about two weeks ago and my Director has not been contacted nor have I received any kind of emails... we already have a configuration of DEP account and checked - but I don't have an ETA or idea, if something went wrong during registration... It is a slow process of moving, or y at - it somebody I can contact about this?

  Hey emsd37,

  I understand that you have questions about registration of device program. You can find the answers to these questions in the following link:

  Where can I get more information and help?

  To get general information on the program, see the Guide to registration device for businesses and education program. For detailed instructions for using the program, see The Apple help deployment of programs. The following articles also provide additional information:

  • Understand Apple, Reseller ID and DEP DEP customer numbers
  • Apple Configurator: Transition to Apple programs deployment
  • Device registration: iOS activation procedure and registration of MDM
  • Device registration: register for a device with hotel services
  • Device registration: DEP officer must approve the new terms and Conditions for new versions of the OS

  If you need assistance with registration, click the need help on registration screens to find the phone number of support of registration for your country or region.

  If you need help to use the program once your registration is complete, contact AppleCare Enterprise technical support or education.

  Device registration program frequently asked Questions (FAQ) - Apple Support

  https://support.Apple.com/en-us/HT204142

  Thank you for using communities Support from Apple. Have a good!

• Get information about the physical location (serial) Visa (slot) in PXI time real (Pharlab)

  Hello

  I PXI system with controller time real (OS Pharlab) and many maps series (about 6 cards).

  The maps in the series are two different models, which each contain several (8431/8 and 8421/8) serial ports.

  And the COM Port enumeration mix and I would like to know the link between COM numbering where it is linked.

  I have already dealt with a few methods:

  1. I've tried using the node property of Visa but he cannot know which card port COM belong

  2. I tried to use the Configuration Library system and don't manage to get general information of the card and not what ports have this card.

  3 try to fill you with the VisaConf.ini, but discovers that ASRL and COM Auto-enumeration is the same.

  4. I tried to look in NISerial.ini, NISerial.dbs and NOR - RT.ini and did not find any help here.

  Application engineer or support suggest to look in the registry of the operating system Pharlab because it is windows based and material information must be stored in the registry

  Further explanation on the problem of PXI enumeration:

  PXI produce enumeration auto for the ports series (COM3, COM4, COM5...) according to the card slot, but when there is a mix of the two models of the system would then list a model (8431) from 3 to 50 (6 cards and 8 ports) and the other model (8421) 51 to 98. so if I have 8421 in 2 and 8431 slot number in the slot number 3 it would list 2nd slot COM59 to COM68 and 3rd slot COM11 to COM19.

  Why not just use NOR-MAX to manually configure the ports?

  The system is essential and can not be stopped for a long time and he operated by people who are not very technical, so the customer who wishes to be able to exchange business cards without futher configuration.

  Thank you

  Or Hirschfeld

  Application engineer

  SK-Electronika, Israel

  www.LinkedIn.com/in/orhirshfeld

  Solved and download the example of solution of community

  Get the location COM (Serial Port) and Port physical location in the chassis