Generate reports for ESX, VM, RAM, and CPU use list

Similar Questions

• Pavilion g6 - 2217cl: the HP Pavilion g6 - 2217cl RAM and CPU/GPU upgrade

  Hey there, I am looking to upgrade the RAM and CPU/GPU on my G6 Pavilion. Here's my current characteristics;

  Laptop model: HP Pavilion G6 - 2217cl

  Operating system: Windows 10 family (x 64)

  Current RAM: 6 GB (used 2 slots)

  CPU/GPU: AMD A8 - 4500 APU with Radeon HD graphics card

  What are the possibilities should I upgrade?

  If more information is needed, I'll be happy to provide.

  It supports up to 8 GB of memory and the processor can be upgraded to a 10 - 4600M. Here is the Manual:

  Manual

  There is no video card to upgrade, but for the models of series AMD A video is contained in the processor itself and an upgrade of the processor also carries with it an upgrade for HD 7640 G HD 7660 G video. It's light but a bit noticeable and clock speed go from 2.8 ghz to 3.2 ghz, which is not huge but noticeable. Memory is a DDR3-1600 module, and you can replace your 2 gig with a 4 gig to spend 6 to 8.

  Memory upgrade is as easy as... CPU/APU don't upgrade not so much.

  4 GB PC3 12800 1600 MHz shared 641369-001

  http://www.Amazon.com/HP-641369-001-1600Mhz-PC3-12800-memory/DP/B008L325TW?ie=UTF8 & Keywords = 641369-001 & qid = 1465472116 & ref_ = sr_1_2 & SR = 8-2

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Performance is very slow and CPU use 90%

  Hello

  Can u please help me for the question below.

  • Performance is very slow and CPU use 90% *.

  Wres

  DJ

  I run esxtop and see what the CPU and go from there.

• If someone UN-install/reinstall the XP operating system for a new beginning and not use any old files more than cure someone of a problem of malware/malicious?

  If someone UN-install/reinstall the XP operating system for a new beginning and not use any old files more than cure someone of a problem of malware/malicious

  Reformat the disk and reinstall Windows XP would heal any problem of malicious program with the exception of an infected MBR (Master Boot Record) on the disk.   The F-Secure rescue CD is a tool that allows to remove a MBR infection.

• Can I download the current that pay for the GI license, and I used in Microsoft with a Mac OS - MAC OS?

  Can I download the current that pay for the GI license, and I used in Microsoft with a Mac OS - MAC OS?

  You can install the software on two computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it.

  Kind regards

  Hervé Khare

• Equium L20-197: to upgrade RAM and CPU

  Hello
  I recently bought a l20 - 197 and if im happy of all, what I want to do is upgrade the ram and processor. Ive found a supplier for ram (www.crucial.com), even if I need some details on the processor that it taken and if it can actually be upgraded.
  Thank you!

  Hello

  Before I try to give you some info on the upgrade, I want to just comment on your ad. Satellite L20 is actually a unit of budget and doesn t expensive. Now, you want to invest enough money in the hardware upgrade. It's not really illogical. Why you didn t get more information and bought the best unit as Satellite M40 or same M70. For a 300 or 400 dollars more, you can have a superior unit.

  Sorry, but the best idea is to sell your one and buy another unit. This is my honest opinion on this subject.

  Now something about your questions: essentially upgrading the CPU is not possible due to the permanent connection method. The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package).

  RAM upgrade is possible and meaningful. Your device has 512 MB of Ram in one slot and unit can handle with 2 GB max.

  Good bye

• HP compaq 610: I want to upgrade my ram and cpu

  Hello

  I have a laptop HP compaq 610 with a intel core 2 duo 2 GHz with 4 GB of ram and a 64-bit processor

  It is therefore not good for games

  now I ask you for the the hardware options available for the upgrade of my camera

  I wanted to add a 8 GB of DDR3 ram and a 3 GHz cpu

  so can I use RAM

  and what are the cpu options can you give me

  Thank you for your valuable time.

  LoRdRedh wrote:
  

  Thank you very much

  It is just that this processor is not good for the games so I have any options?

  You need to get a gaming laptop and those cost 2000US started playing HD games.

• Re: Satellite M70-131 - RAM and CPU upgrade

  Hello, I have 2 questions:
  1 is it possible to install more then 2048 MB RAM in M70 - 131. If someone tried this?
  2. is it possible to install the new processor of M70 - 131? Now, i've got Pentium M (750) 1, 86GHz (Dothan, 533 MHz). Can I install for example Pentium M (780) 2.26 GHz or higher?

  Hello

  The M70 supports max 2 GB of RAM and upgrade the CPU is usually not possible and undesirable for different reasons.
  In most cases the overheating is the main reason why you shouldn't t try to upgrade the processor. Secondly, the BIOS was not designed to handle the different processors and no one will be able to tell if your cell phone will work stable after an upgrade of the CPU.

• Need direction for the upgrade RAM and graphics card in my all-in-one Center B320 Office idea.

  Hello

  I want to level of Ram and graphics card I have my all in one ideacenter B320 Office.

  current specification of my office:

  CPU - 2nd gen cor i3 (3.10 ghz)

  RAM - 3 GB

  Graphics - 1 GB (AMD)

  can I put at 1.5 GB or 6 GB and 2 GB graphics card ram level.

  orientation need help pls...

  Thanks to adwance...

  Hi Mahendranaik63

  Welcome to the Community Forums of Lenovo!

  I guess these B320 data can help you with updates.

  Data sheet B320of Lenovo. (The information you are looking for 'KEY FEATURES' statement).

  Also check this personal reference guide under Lenovo B320 page.

  I hope this helps.
  See you soon!

• Windows 7 RAM and CPU problem

  Last week, I was playing League of legends and I was in the middle of a match, during the match, the client is crushed and restart windows because he had needed updating. After the update, I open League of legends to start my computer. And it took like 10 minutes usually, it takes about 30 seconds. Then when I've finally got back in the game you the fps went from 60 (before the update) to 12 (after the update). So I decided to look at the Task Manager, and it took up to 99% of the CPU. I reinstalled the game, the FPS was always the same, but he was faster. I tried to open my browser google chrome, it took a good 2 minutes. The CPU and ram, however, was very good. So I opened up a little more of my games and they are starting to take a lot of memory and CPU. I ran my full analysis of the 360 North, no viruses. I've done sfc/scannow, nothing wrong. I think scvhost programs might be the problem because when I analyze wait chain on my programs that take up a lot ran and CPU it is still a program scvhost in there. Help me please, this update of windows did the damage.

  Hello

  You can try to follow the following suggestions to solve the problem.

  Measures to reduce the use of CPU.

  1 - Press 'Ctrl', 'Shift', 'Esc' on your keyboard. This opens the task without any intermediate screen Manager.

  2 - Click on the "process" button in the Task Manager.

  3 - Click the "CPU" column heading up to what the arrow next to the label down points.

  4-click on a program you recognize who is using a high percentage of the CPU and click ' end process.» Click on "complete the process"reconfirm.» This facilitates upward on the load of the CPU. Use this step if you are not using a process, or the process is not responding. Do not use this procedure for windows processes.

  Reference:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Note: Has ny data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Card replaced mother, RAM and CPU. Should I re - install or re - activate my Windows 7?

  3 months ago I finished my 3rd generation PC. I built an AMD/AM2 socket system and I bought an OEM of Windows 7 Professional (32 bit) version. After only 2 months of use, the thermal paste between my processor and the heatsink dribbled out and down onto my card mother socket. This fried my M/B and the CPU. They no longer worked. I replaced my M/B and CPU with a socket AM3/AMD system, which includes a different type of RAM, as well. My o/s is on my SSD and the storage of my data on a mechanical hard drive. I have already paid my o/s and you simply want to change the parts concerned. How should I proceed regarding the re-use of my brand new Windows 7 Professional with minimal headaches? I heard of re-activation of phone procedures. Should what steps I take to make sure that my operating system is allowed up and running and safe?

  You need to convince MS that your cause is just (it seems to me that it is) - and use telephone activation.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Solution for Google Chrome (Helper) by using a lot of ram and cpu on mac os x

  Hi all

  Some people have several tabs of google chrome, and it's using a lot of RAM. It also causes the fan go crazy sometimes. I looked for a solution for centuries, but no solution has allowed, until I stumbled upon the simple solution to use a google chrome extension that hibernates unused tabs. The problem has now completely disappeared.

  There are a few different extensions that Hibernate unused tabs, but the only extension which has enough options setting to do what I want, is called "The Great Suspender".

  You can set the time, after which the Hibernate (sleep) tab. The tab automatically resumes when it focuses on, (i.e., you don't need to then also click on a specific button). And the tabs of the extended day before will remain in hibernation after you restart the computer.

  There are many other parameters that can be changed. (After you have made changes, don't forget to click the 'save changes' button.)

  I hope this helps.

  Thanks for the tip.

• Re: Satellite A100-667 - RAM and CPU upgrade

  Hi all, I am considering upgrading RAM on my * SATELLITE A100-667 * (PSAARE-02700DIT). Is anyone know the maximum amount of ram I can install it? What clock is supported? (553, 667...)

  And what about CPU? The laptop comes with an Intel Mobile Core 2 Duo T5500 1.66 GHz on Intel i945PM chipset.

  Thanks in advance for any information.

  P.

  Hello

  I think that you should also check your RAM upgrades for user manuals. As far as I know that you can upgrade your laptop with 4 GB of RAM. Therefore, you can use DDR2-533 modules. You buy from an authorized service provider or Kingston modules also recommendable.

  Upgrading the CPU is not supported. BIOS and motherboard are tested only with the preinstalled CPU.
  Also check similar discussions on this issue.

• Generate reports of problem: Long time and no data

  Hi all

  Please, I have a problem when generating a report. My report has 22 views and dashboards. Before I could generate without waiting too. Now it takes so long, and the content of all of the dashboards that isn't shawing (no data).

  You have an idea why is it like that? For more information, all the values in the vROPs VM are genrally good. Just the IOPS virtual disk are up to 362,63 IOPS / s.

  What I have to restart the virtual machine?

  Thank you in advance.

  Only slowness is the generation of reports. I tried everything, as to uncheck CSV format, excluding the dashboard... it takes too long until I restarted the master node and data nodes, while everything was ok.

• reconfiguration of the machines RAM and CPU of VM

  Hello!

  Guys, please help me in my task. I need to reconfigure virtual servers CPU and RAM. That's why I need the following steps by PowerCLI

  (1) stop the server

  (2) change of CPU and RAM

  (3) power on the server

  I guess I'll have a csv file with 3 fields (servername, CPU, ram value value)

  Can you please give me first push, example or tutorail to get this task performed.

  Another question how server list will be processed? Each server will be processed one by one, or he is able to implement the above steps at the same time for each server in the list? What can advise you in this context?

  Thank you in advance!

  Try something like this

  Import-Csv c:\vms.csv -UseCulture | %{
      $vm = Get-VM -Name $_.VMName    Shutdown-VMGuest -VM $vm -Confirm:$false    while($vm.PowerState -ne "PoweredOff"){
          sleep 5        $vm = Get-VM -Name $_.VMName    }
      Set-VM -VM $vm -MemoryGB $_.MemoryGB -NumCpu $_.NumCpu    Start-VM -VM $vm -Confirm:$false}
  

  The CSV looks like this

  "VMName", 'MemoryGB', 'NumCpu.

  "VM1', '8 ', ' 2 '.

  "VM2', '4 ', ' 1 '.

  This script will do the changes-stop / start 1 VM of sequences at a time.

  You can do this in parallel, but this will require the script to follow each of the substantive tasks before you begin the next step

  Note: the script assumes that the VMware tools are installed on the virtual machines.