Generation of impulses associated with Motion Control

Similar Questions

• Problem with motion control

  I have a Lenovo Ideapad Yoga and there is a problem with my order of movement. A pop up window says: 11 hand Form Load Failed. motion control cannot start: what should I do then?

  assybish wrote:
  I have this problem too what update to windows 8.1 looks like part of the program of control of movement broke out during the upgrade (as did several other - Bravo M * you) have tried Lenovo support and their stock answer to every problem is factory reset and return to windows 8 (and lose all your installed programs (, etc. >!) If any staff of Lenovo never read this please get a grip going back to win 8 is not the answer! Lenovo should provide for download or via a software of rescovery dvd for their applcations.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS041312

• A security update for Microsoft Visual C++ 2010 Redistributable Package (KB2467173) cause problem with Catalyst Control Center

  I use the HP Pavilion G6 1117tx with

  AMD Radeon HD 6470 M driver version 8.882.2.0 i.e. graphics card and

  Intel Graphics HD 3000 driver version 8.822.2.0, it came as a complete with

  Microsoft Visual C++ 2010 version 10.0.30319 on the site of sellers.

  And after I installed upgrading security for Microsoft Visual C++ 2010 Redistributable Package (KB2467173) it would cause a problem with the launch of the

  Catalyst Control Center version 2011.0817.2216.38121 the catalyst control center would launch and accident immediately but she always see the process running in the Task Manager.

  I removed all the drivers and the software associated with the control center catalyst with Microsoft Visual C++ 2010 and reinstalled all the package and tried the update, but still the same problem that led me to the conclusion the problem was with the update.

  Assistance would be appreciated. Thank you

  Good morning Mukul,

  Thank you for your response.

  I appreciate your time.

  Please refer to the suggestions marked as answer Andrew.Wu, Moderator on 24 January 2011 and check.
  https://social.msdn.Microsoft.com/forums/vstudio/en-us/10f5ba3a-b0bd-4f53-AC02-fa8634953dd0/Visual-Studio-2010-keeps-causing-display-driver-to-crash?Forum=VSSetup

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  Please keep us updated on the status of the issue.

  Thank you

• When I try to play games on windows vista I get a message saying "this file does not have a program associated with it for performing this action. Create an association in the control panel of the associations. How can I fix it?

  XXXXXX

  Hi Randy,

  Welcome to the Windows Vista answers Forum!

  I have a few questions about your concerns:

  (a) game in which you try to read?

  (b) is this the case with all games or any game in particular?

  (c) you are trying to play the games that are built with Window Vista?

  (d) what version of Window Vista do you use?

  You can also try the suite of measures to define the association:

  1. open the control panel. (Classic view)

  2 click the default programs icon.

  3 click on the link associated with a file type or Protocol with a program . (See screenshot below)

  4 click the extension file type to change which program .exe association opens. (See screenshot below)
  NOTE: It may take a while to load up

  5 click on change program button.

  6 if the list, select the program that you want to be associated with (opens) the file extension. (See screenshot below)

  (A) check the always use the selected program to open this type of program , and then click OK.

  7 if the program is not listed, then click the Browse button and navigate to the .exe of the program you want to default to open the file extension.

  (a) select the program.

  (b) click on the Open button

  (C) check the always use the selected program to open this type of program and click OK to apply.

  This should solve your problem.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "This file has no program associated with it for performing this action. Create an association in the Folder Options Control Panel. "

  When I try to evoke some (not all) attachments on my screen (on Outlook Express), I got the following:
   

  "This file has no program associated with it for performing this action. Create an association in the Folder Options Control Panel. "

  I went in (Windows XP) Folder Options in the control panel and have no idea how to do to "create an association?   Could someone please give me a hint on how to do this?

  Thank you.

  Frank

  Hello

   
  • What type of file you are trying to open?
   
  I suggest to change the default program and check.

  How to change or choose the program that starts when you double-click a file in Windows XP

• Error "this file has no program associated with it for performing this action. An association in the SET ASSOCIATIONS of Crete Control Panel

  Original title: file Association.

  File association.  I am trying to create a delivery company in a direct line between doba.com, and ebay.  I get an error when I try to export.  The error "this file has no program associated with it for performing this action.  An association in the SET ASSOCIATIONS of Crete Control Panel.  I don't know how to do this.

  Great, I can help you right now.  Just open your C:\Users\Peggy\Downloads folder.  While you're looking at him, make a right click on the file icon and choose 'Open with', then "Choose program" you can get the Notepad in the list.

  Here is an example. This example is Windows 7, so it seems a little different, but the steps are the same:

  1. Right click on the file
  2. Go to "open with".
  3. Choose "Notepad."  If Notepad is not listed, use the option "choose by default" to find Notepad instead.

  This will open the file for you to view the data inside.

  

• "This file has no program associated with it for performing this action. Create a partner in association with control panel

  I download HotSpot Shield, but when I run the program it shows "this file has no program associated with it for performing this action. Create a partner in association with control panel

  Hello rajlama blanchon,.

  I suggest to download Hotspot Shield 2.18 from the following link and then try to install it.

  http://hotspot-shield.en.softonic.com/

• try to open the Control Panel, a statistics box "this file has no program associated with it for performing this action.

  When I try to open the control panel a stats of dialog "this file has no program associated with it for performing this action. Create an association in the creation of an association in set Association Control Panel. "How to do that when I can't the mother lode, the program control panel? Thus the program Windows Fix It; t fix it.

  Hi ChuckCase,

  1. don't you make changes to the computer before the issue occur?
  2. what program of fixit of windows are you running?
  3. what happens when you try to open Control Panel?
  4. do you get an error message?

  Method 1
  I suggest you try the steps from the following link:

  Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center, or games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  Method 2
  I suggest you to scan SFC.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• This file does not have a program associated with it for performing this action. Create an association in the set association Control Panel

  Original title: associate together

  Hi all

  Whenever I click on an icon, it comes up with an error message saying "this file does not have a program associated with it for performing this action. Create an associatiob in the control panel of binding together"Corsica, I had a quick glance in the control panel and there is no. Can someone please?

  Hi, blixy16.

  First of all, I suggest that ensure you that your computer is virus-free.  You can start with themalicious software removal tool. Additional suggestions are available in the forum topic Microsoft Answers "How to get rid of malware .

  As a result, to determine if the problem you are experiencing is caused by one or more system files that are used by Windows, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  • Click Start and type cmd in the box start the search.
  • Right click on cmd in the list programs, and then click Run as administrator.
  • If you are prompted for an administrator password or a confirmation, type your password or click on continue
  • At the command prompt, type the following line and press ENTER:
    sfc/scannow (note the space before the backslash)
  • When the analysis is complete, test to see if the problem you are experiencing is resolved.

  If you still have problems, fixes for Windows Vista file association of Microsoft MVP Ramesh Srinivasan can be useful.

  Edit to add this document explaining the difficulty of association file above: corrected my mistake of context Menu Manage computer "this file is not an associated program" in Windows 7/Vista - The Winhelponline Blog

  Corrine, Microsoft MVP (consumer security). This announcement is in my opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS and is provided without warranty and not an entitlement.

• When I click on a link in an e-mail, I get this message "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  When I open an email and click on a link in this email, I get this message.

  This file does not have a program associated with it for performing this action. Create an association in the set Associations control panel.  I have no idea what it means.

  * Message must have 6 to 60000 characters.

  * Please select a forum.

  Notify me when someone replies to this question

  Go to control panel | Default programs | Associate a file type or Protocol with a program.  Then page down for protocols and find the HTTP and HTTPS set IE as default handler protocols.

  Steve

• If I click on anything whatsoever on my desk, a window appears: this file does not have a program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  Original title: all my programs have become more associated with their shortcuts in my windows start.

  All my programs became most associated with their shortcuts. If I click on anything whatsoever on my desk, a window appears: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. " I must do this for each shortcut? Microsoft Word, all my accessories, none of the links are attached to nothing. Y at - it a quick fix to my problem, or I am looking at a restore of the entire system?  Help, please!

  Look at the tutorial on changing to default file associations.
  http://www.mydigitallife.info/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-Windows-Vista/

  It should help to solve your problem.

  Thank you

  Marilyn

• Help! All programs will not work. I get the error message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  When I try to run a program (Internet Explorer, Firefox, CCleaner, etc..) I get the same message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I can't find the "Set Associations control panel" and am not sure that he would go if I could find it, and if it work I do not know I know what to do. Help!

  Should I re - publish so that else soeone looks like?

  If you wish.
  Make sure you add a line right at the beginning: you are reposting because we could not have solved other fold it.

  Alternatively, you wait for the next person coming.

  The choice is yours, although generally you would be advised to stay put and wait. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Attachments: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  When I click on some attachments a box that says: "this file has no program associated with it for performing this action.  Create an association in the control panel to define the Associations. "  I don't know how to do this (if I'm unable to view these attachments).

  How to do would be to install the appropriate program to open attachments if it is not installed, if it is installed the easiest to set the association would be to save a copy of the file on the desktop, right-click and select "open with...". "in the context menu, and then select the appropriate program if it is shown in the dialog box or use search to find it if it is not.

  "endoftheroadgal" wrote in the new message: * e-mail address is removed from the privacy... *

  When I click on some attachments a box that says: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "  I don't know how to do this (if I'm unable to view these attachments).

• Error "this file has no program associated with it for performing this action. Create an association in the control panel of the associations' when trying to read the video files on the CD

  Original title: file does not have a program associated with it for performing this action.

  I make a business card CD on Auto Play Studio 8. I have completed the project and burned the cd to test on different computers. When I clicked on the 'Video game' button, I get this warning. "This file has no program associated with it for performing this action. Create an association in the control panel of the associations' Ok I made the proper action to take, and I still get the same problem. I did this on a XP pro, Vista and 7 PC.

  
  Hi NoPCgeek,
   
  1. what program do you use to read the file present on the CD?
  2. What is the format of the file present on the CD?
   
  Before playing the files on the CD, make sure you cross check if you have the right program installed on the computer. If you have not installed the right program, then we recommend you to install the program that supports the file type and use them to read the files on the CD.
   
  You can also change the default program to read this file. The program opens the file only if the file format is supported by the latter.
  See Change that uses default Windows programs
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to run programs .exe produces the error message "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  Hi all

  Help needed please.

  HP dx2250 microtower, running Windows Vista Home Basic Edition, recently attacked by Vista Antispyware 2010. Norton 360 V3 dealt with rather late the virus, but the fall of the remains.

  I am unable to open any .exe file (program) on the desktop, start menu, or through the browser. I can access the programs in opening a data file, for example, double-click a .doc file opens MS Word, etc.

  The error message "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I tried an automated solution that is available via the forums (exefix_cu.reg) and also a manual suggestion to change the registry, also available through the forum.

  I also splashed by and purchased Regcure, who seems to have done no difference despite who claims to have removed 1500 odd errors. So I'll be request the refund on that one.

  I scanned the forums and found a large number of similar problems, but not one that is as complete as this.

  Any help much appreciated

  Hi all

  Thanks to anyone who has seen this link and made suggestions.

  I was looking at a similar, and is other problems came up with this very useful link, I am grateful to say has solved the problem.

  Sorry MapDrummer, but I'm not sure if it works for XP

  Follow this link to SpiritX who has the answer

  Hi Justalilkink,

  See also the post made by SpiritX on January 24, 2010 17:32 in the link http://social.answers.microsoft.com/Forums/en/vistafiles/thread/086ab3bb-d764-4fb1-a6f3-205bff708e63

  Thank you very much