Gesture of unknown trackpad OSX optimizes each bin in the component of the program.

Similar Questions

• Satellite A660 - striped black plastics little four on each corner of the screen

  Hi all!

  I just bought a * new * Satellite A660-149 notebook online (eBay, UK seller), as the title says.

  All seemed well, package and everything. Sheet of clear plastic on the sides of the laptop (not on the screen although). I registered it through the Toshiba record Utillity. Yet, on the link: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/globalEntitlement.jsp says that it is not registered.

  Today, I noticed that the four small black senior round plastic that cover the four screws at each corner of the screen are scratched or damaged a bit around the edges, as if someone had used a screwdriver to remove them. And they are stuck with a kind of glue.

  Shouldn't they be strong and clear? Is that normal, everyone noticed that? Because if this also applies when you buy the laptop directly from Toshiba, I dial it just with it.

  Thank you!

  Vlad

  Hello

  I have an A660 18 and although they are not striped have also like a pasted look.
  I guess it's 'normal '.
  My screen has also been discovered.

• a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

  I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I tried several times to install security updates KB2541025 and KB2543854, but each time getting the message "code 779.

  Original title: update problems

  I tried several times to install security updates KB2541025 and KB2543854, but each time getting the message "code 779" and "Windows Update has encountered an unknown error. I tried to find an explanation here, but no result.

  see if that helps-

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• An unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.

  Since yesterday, I was not able to import any movie that I get the following error

  an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  

  Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.

  
  I tried the following

  1. a different memory with a new registration card

  2 removing and re - import an old movie

  3. to remove and re-import and old movie created by another camera

  4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -

  5. upgrade to El Capitan to see if maybe OSX update may help.

  
  

  None of them had no effect, can anyone help?
  

  
  

  
  

  
  

  
  

  
  

  Hello

  You're welcome ShawWellPete, I thank you for everything.

  Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)

  Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld

  There could be some service startup that is in conflict.

  Concerning

  Jitendra

• "Unknown Server error" - that's what the program says CC when I try to open a session!  Help!

  Updated the CC program and now I can not connect!

  I wanted to update my Adobe programs to CC versions.  I saw that they were all loans in the program manager, but I restarted first because I wanted that update perfectly.  OOPS, when I restarted the Application Manager says he is automatically updated.  The new seems to be merged with the creative cloud Panel.  Now everytime I try to log in, I get just "unknown Server error".

  I checked on the Manager program, which needed to be updated and uninstalled because I have a C: drive of 120g ssd on my video editing PC software.  Now my programs have disappeared and I can't install the new!   Help!

  I have been long awaiting the release CC (because there is a bug in first I was eagerly awating a fix for promised in CC.)   I'm right in the middle of a project for a client that uses the sequences which have suffered from this bug.  As I tried to upgrade, I'm out of the Pan and it to the fire.  Now, I'm really stuck!

  Deleting the file opm.db had me back on track (Mac OSX 10.8.4). Also sent the PDApp.log to Eric. Thank you guys!

• Trackpads only 2 fingers scrolling on the Mac Mini

  I have two Magic trackpad (wireless), a couple of years; No will 2 fingers scrolling on my Mac Mini (try them for the first time on the Mini). both work fine on my other machines.  All machines are updated to the latest version of El Capitan, a lot of RAM.  Same settings trackpad on all machines.  The movement of the cursor trackpad, highlighting, click Select OK on the Mini, but no two fingers scrolling, without pinching to resize.  Have not checked all the possibilities, but lack of scrolling is a deal breaker.  Track pad update 1 is too old, have not found another.  Tried with mouse wireless on and outside.  A run first aid.  Reinstalled the system software.  Even enabled the scrolling options, the settings of the mouse.  Help!

  If two of your machines running El Capitan and touchpads are version 1 of Trackpad, it is probably the reason.   While versions more old mouse and trackpad will work to some extent, all the features with El Capitan requires the version of Magic Trackpad 2.   The MT2 has developed especially for El Capitan and later operating systems.   I know that it's a nuisance, but the new trackpad is levied directly on your machine and needs no battery.

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• From itunes to an mp3 CD burned on a macbook OSX 10.7.5. The cd plays a sound skreechy in the wave cd player. How can I fix it?

  Burned a cd from itunes to an mp3 on a macbook OSX 10.7.5. The cd plays a sound skreechy in the wave cd player. How can I fix it? The cd will play the mp3 in the macbook. He play the cd or access my itunes music? I burn on CD documents successfully. But I've never burned audio successfully. Please notify. Thank you.

  For problems of audio on a CD (as opposed to combustion problems do not at all), you can often clear up by re-burning at a lower speed.  Use 2 x.  This setting is available in the dialog box burn the disc.

• Windows 10. Control user account each time to the home page. STINKS! Is there a solution?

  Windows 10. Control user account each time to the home page. STINKS! Is there a solution?

  A possible cause of this message, it is that Firefox is configured to run as administrator.

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" of thz
  e Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

• How can I add a response at the end of each point of the issue in a list of questions and send back to the sender?

  I have emails that require some points to address such as "Please fix leak in the bathroom sink' and then the next line will be another application and so on. I would like to answer each question at the end of each line with a response (preferably in a different color to stand out police) such as "Yes - will fix" or "that cannot be done" or "you'll have to fix that yourself." So, I want to send this reply to the original sender.

  It is probably easiest to copy and paste the initial list of questions in your answer, first of all and then add your comments.

  If you have the problem that the list numbers change when you try to add your comment about a new line, try to make your line breaks using shift + enter instead of the entry.

• HELLO I HAVE A PROBLEM CAN YOU HELP ME? each window in the colorfull mozzila browser places

  each window in the square and flashing colorfull mozzila browser

  However since this was instructions for the office, in order to disable in mobile:

  1. You may need to disable this option in the Android settings you Tablet:

  Android Settings > Developer > Show screen updates
  

• Home page and a few other Web pages have a vertical bar of 2 inches on each side of the page. How to permanently set set the pages to fill my screen?

  I have a HP - i5 with Win 7 and only use Firefox 35.0.5. Recently, I met some problems with my home page loading with blue text on the left side of my 2-inch screen and put it in the shop. Some viruses are removed and 35.0 FF was installed.

  Now my home page and pages loading with a 2 "empty bookmark bar vertically to each side of the page.

  Can I use zoom in on the view or the - + zoom and zoom to 100% to 133% increase, but this change is never permanent.

  Try to fix the problem I uninstalled FF 35.0 and installed FF 35.0.5 directly on the FF site. I also uninstalled AVG virus protection program. None of this has helped.

  How can I get rid of these vertical bars of 2 inches of empty space at all TIMES?

  I have a HP laptop with a processor AMD, Win 7 and Firefox 35.0.5 and he has never had this problem.

  Firefox should remember your level of zoom on a site-by-site basis. It is not "global browser" as in IE.

  Note: If you zap the history, make sure not to clear the Site preferences.

  If you need to adjust each site by about the same amount, you can use an add-on to set a higher level of the base line of the zoom. For example: Default FullZoom Level.

  Unfortunately, there is no unique zoom level that will work perfectly for all Web sites due to the preferences of individual positioning of their webmasters. But I hope you can find a good middle ground so you need not all zoom each time.

• At the opening of the library of photos, each photo turn the black thumbnail and so that to open it.  Preview also does not have photos properly.  I tried to repair the library and this did not help.  Help, please!

  At the opening of the library of photos, each photo turn the black thumbnail and so that to open it.  Preview also does not have photos properly.  I tried to repair the library and this did not help.  Could this be a problem with the RAM? Help, please!

  Check, if pictures can access the original files of your pictures, or if the originals are missing.

  You can test to try to edit a photo or trying to export it with "file > export > export original file..."

  Photos can be edited or exported?

  Shooting Raw or JPEG?  Where your photo library is stored? On an external disk or in your pictures folder?

• After the installation of update ver14.0.1, when you print a page on aweb site, why is that each line of the page to be printed each line on a separate page? !

  Each line in the document is printed on a separate page, IE: ten lines will print 10 separate pages for printing.

  Try of the reset described here:
  
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_printer

  Make sure that you reset all the print preferences.