Get error 'Failed to verify internal {no context}' when using the suite of flow

Similar Questions

• I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work.

  I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?

  When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall.   Panel\Windows Firewall control page should have shown a message say.  If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.

  I really think you should try a restore for some time point before you tried modifications, if that is even possible.

  If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.

  If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting.  Your system is in an unknown state as a result of these changes.

  You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.

  You may need to use the installation DVD to do a repair installation.  I hope get you lucky, but you may need to do a complete reinstall of Windows.

• I get message "Failed to contact a reliable source" when trying to install Flash Player.

  I disabled AVG anti-virus and uninstall older versions of Flash Player.  I get message "Failed to contact a reliable source" when trying to install Flash Player.

  Download and run installation programs http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header -offline

• HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

  HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

  The printer works at all with this cable?

  The cable has recognized and installed by Windows XP when you logged on to the computer?

  If the cable has been recognized, what steps have you taken to install the printer then (be as accurate and complete as possible)?

  You get an error message?  If so, please provide, without paraphrasing.

  This printer has already been installed on this computer?  If so, with what type of connection?

  And especially, what is the brand and model of the USB to parallel cable?  Many of them do not work.  See, for example, the comments here , which suggests that 25% of the units will simply not work.  This seems to be one of these products you should buy at a local store, rather than on the Internet, then you can continue taking it back until you get a working unit.

• Error message indicating the r300 display driver stopped responding when using the full screen.

  Original title: driver atikmdag error message when using the full screen.

  Error message indicating the display driver r300 unresponsive, but has recovered, usually when enter full screen mode.

  Hi Peterrichardson,

  1. when exactly you get this message?

  2. what player do you use?

  3. you remember to make changes to the computer before this problem?

  Method 1:

  You can try to reduce the hardware acceleration and check.

  a. click the Start button, Control Panel.

  b. now, select appearance and personalization, and under display, select adjust screen resolution.

  c. now, select adjust the resolution.

  d. click Advanced settings.

  e. now, click the Troubleshooting tab, and select the change settings button.

  f. in the Security dialog box, click on continue.

  g. move the hardware acceleration slider to the third notch.

  h. click OK and restart Windows.

   

  Method 2: Update your display driver

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to resolve thei problem the next time it starts. Never does. Tried to uninstall and reinstall but no good.

  I get a message saying Lightroom met an erorr when reading the preview cache and need to stop smoking. Then told that Lightroom will try to solve the problem the next time it starts. Never tried to uninstall and reinstall but no good.

  Sound familiar to anyone?

  Hello

  Please go to the save location of the Lightroom Catalog and here please delete the Lightroom Catalog Previews.lrdata folder.

  Now please open Lightroom and check if it works.

  Please let us know if it helps.

  Kind regards

  Tanuj Sandal

• Get error "Failed to Downlaod 907 invalid COD file not found"

  Hello

  So I created an app for Blackberry and it works 100% in the Simulator... But when I try to copy the application on my physical device and install it using the .jad file, I get the error 'failure of Downlaod 907 invalid COD file not found' every time that... It won't install. But when I use the Blackberry "Rock FIle Manager" app and use its functionality of COD Installer application installs fine... Also, when I use the 'Create-A-JAD' program to create a .jad file from the file and then .cod file replace the build with the Create-A-JAD a .jad file and then install the app, it works...

  I used the software 6 SDK and my physical device is a Blackberry 9300 which is runnin OS6. My application is signed... Here is a link to an image that demonstrates that the app is signed... http://www.freeimagehosting.NET/ytoge

  What could be the problem so that it does not install it?

  Thank you very much!

  you could try to unpack cod (its actually a zip file that contains the subsidiary COD), maybe it helps.

• Get the error when using the UTL_SMTP function in Oracle 11 g

  Hello

  I get the error when executing a trigger e-mail code in oracle 11 g:

  I have following trigger on the temporary table:

  CREATE OR REPLACE TRIGGER temp_temp_message AFTER

  INSERT OR UPDATE ON temp_message FOR EACH LINE

  declare

  Conn UTL_SMTP . CONNECTION ;

  msg VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Insert in temp_message values ()1

  );

  When I insert the record in the table there are given the following error.

  ORA-20000: failed to send messages because of the following error: ORA-24247: access denied by access control (ACL) of network list

  ORA-06512: at the 'APPS '. TEMP_TEMP_MESSAGE', line 14

  ORA-04088: error during execution of trigger ' APPS. TEMP_TEMP_MESSAGE'

  But if I run the next plsql through sqlplus send mail successfully:

  declare

  Conn UTL_SMTP . CONNECTION ;

  MSG VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Thanks in advance.

  Yoann

  To resolve ORA-24247 you must:

  (1) create an acl (if it is not already created)

  (2) add the user privileges using the resources of the network

  (3) to use the ACL to a specific address

  This might be useful

  How to fix an ORA-24247: access denied by access control (ACL) of network list | DB tips

• Getting error Code: 641 on 4 of my updates to the window.

  Can I would download 4 my Windows updates.  Keep getting error 641 error unknown. Apparently there are other people with the same problem, my engineer told me.  Microsoft Update Setup with an update's  I got 29 results of this error.  I can't stay here all day trying to fathom the all out. I don't know where to start...

  System Mechanic is the troublemaker here... and you have plenty of company, too! See these recent discussions-online

  ~~~~~~~~~~~~~~~~~~~~~~~~

  OPTION A: have your 'engineer' fix.

  OPTION b: If you have backups of ALL System Mechanic has EVER done on your computer changes, restore ALL the & restart and test - and then uninstall System Mechanic & some other registry cleaners. [1]

  OPTION C: execute RESOLUTIONS methods #1, #2 and #3 in http://support.microsoft.com/kb/2642495 then reboot & test.

  OPTION D: Contact System Mechanic (iolo.com) support, assuming you have purchased System Mechanic Professional.

  ===========================================================
  [1] TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• I get error 01, 57 a and 643 codes when installing updates

  When I try to update Sliverlight (1), Bing bar 6.0 and security update for Microsoft office infopath 2007 I get error 01, 57A, and 643.

  Hello

  Here's the info from MS for 643

  http://support.Microsoft.com/kb/923100

  _________________________________________________

  see if that helps with your problems

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  
  

• Updated windows HP 2000 error failed revertong configuration changes do not turn off the computer

  This computer is my friend.  I don't know what she does for her.  I fixed it before, but it worked one for hours and the same message is still there.

  "HP 2000 failed configuration error windows update revertong changes do not turn off the computer"

  Can someone help me please?

  I forgot too say what Windows 8.

  Hi @Margaret_62 ,

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your friends laptop HP 2000 is blocked on "default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer"and worked for hours.

  First of all, I would like to try a hard reset. Performing a Hard Reset or forced Reset.

  If the problem persists here are some links that may help.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates (from support.microsoft.com)

  Computer won't start (Windows 7, Vista, XP)

  If this is not resolved so, you can try a Refresh Your PC to solve problems (Windows 8).

  This will reinstall Windows, but does not affect your personal files.

  If you need further assistance, please provide your exact model of 2000 HP notebook and the result of the resolution of the problems.

  How can I find my model number or product number?

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• I get error messages on my dial-up connection when I don't have a dial-up access!

  Original title: "Windows Mail problem"

  When you use Windows Mail, I got error messages on my dial-up connection when I don't have a dial-up access! Is no more, I can send or receive mail using windows mail. I have a connection high speed and have never had this problem before? Can you help me?

  In Windows Mail, go to select Tools, accounts, your account email, properties, connection. It shows for the connection?

  You should leave this setting not selected, in this case Windows Mail will use any connection IE uses.

   

  In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.

   

  If you still have the same problem later, the account may be damaged. Remove account, restart Windows Mail, and then recreate the account.

   

  Gary van, Microsoft MVP (Mail)

  "RhondaRLee" wrote in the new message: * e-mail address is removed from the privacy... *

  When you use Windows Mail, I got error messages on my dial-up connection when I don't have a dial-up access! Is no more, I can send or receive mail using windows mail. I have a connection high speed and have never had this problem before? Can you help me?

  Gary van, MVP (Mail)

• Get errors when using the xml parsers in my client application.

  Hello

  I use JDE 4.5.0, Jdk 1.6.  In my application, I need to read the xml data so I used the packages below

  import java.io.File;
  Import javax.xml.parsers.DocumentBuilder;
  Import javax.xml.parsers.DocumentBuilderFactory;
  to import org.W3C.DOM.document;
  Import org.w3c.dom.Element;
  Import org.w3c.dom.Node;
  Import org.w3c.dom.NodeList;

  But when compiling it's show

  Cannot resolve symbol
  symbol: DocumentBuilderFactory class
  location: packet analyzers
  Import javax.xml.parsers.DocumentBuilderFactory;

  Cannot resolve symbol
  symbol: class file
  Location: package io
  import java.io.File; ...............

  Same type of java file that uses similar packages is correctly compile another IDE (Editplus). That's why show this compilation errors.  I scoured the forums of Sun they mentioned that "XML support is build in the JVM 1.4 and later." No need of extra pots.  How do I set this compilation errors.

  Please give your suggestion, thanks for the tip for the same thing.

  Kind regards

  Sunil.G

  Thanks for your reply MSohm.

  In my class used resulting classes that the errors below.

  Import javax.xml.parsers.DocumentBuilder;

  Import javax.xml.parsers.DocumentBuilderFactory;

  now instead of what I used

  Import net.rim.device.api.xml.parsers.DocumentBuilder;
  Import net.rim.device.api.xml.parsers.DocumentBuilderFactory;

  reading file, I use (instead of java.io.File)

  InputStream inputStream is getClass () .getResourceAsStream (_xmlFileName);.
  Doc document = db.parse (inputStream);

• vCAC vCO plugin - get vCACCAFECsResourceType for resource type internal 'IaaS VC VirtualMachine' in the workflow?

  HI -.

  I'm in vCO using the 6.0.1 plugin vCO for vCAC, trying to create a resource vCAC action ADS face a VC:VirtualMachine. When I manually register my process of action in the UI vCAC, he finds the parameter of VC:VirtualMachine and maps to a resource type 'IaaS VC VirtualMachine', and action shows and works against the VMS selected in the user interface elements vCAC.

  Now, in a workflow to create the action for the resource, I try to use createResourceActionFromWorkflow() from the package com.vmware.library.vcaccafe.asd.resourceaction , which requires a vCACCAFECsResourceType (i.e. VCACCAFE:CustomResource) object. I would like to point to the same resource type "Infrastructure.Virtual" that uses the vCAC UI, but I can't seem to find in a safe way.

  If I get a VCACCAFE:ResourceAction created previously and look at his getInputParameter () .getResourceType () in a workflow, I can see an object that looks like:

  [2014-08-11 16:14:50.094] [I] type.id = eaba1f37-6154-4 ch. 17-94ae-ea419cb9e14e

  [2014-08-11 16:14:50.095] [I] type.name = IaaS VC VirtualMachine

  [2014-08-11 16:14:50.095] [I] type.externalTypeId = Infrastructure.Virtual

  [2014-08-11 16:14:50.095] [I] type.vcoType = VC:VirtualMachine

  [2014-08-11 16:14:50.095] [I] type.vcoId = null

  [2014-08-11 16:14:50.095] [I] type.providerId = asd.external

  [2014-08-11 16:14:50.096] [I] type.tenantId = _internal

  and if I make a new vCACCAFECsResourceType() and manually set the values (especially the id) in this object and use it in createResourceActionFromWorkflow(), it works. But he feels unsure and hardcode the type.id in my workflow - is that work on the other vCAC installs?

  Also, I was to get the corresponding vCACCAFEResourceType via:

  
  

  vCACCAFEHost.createAdvancedDesignerClient () .getAdvancedDesignerCsResourceTypeService () .getResourceType ('_internal', 'Infrastructure.Virtual');

  but it's a different object class and I do not see how to get the vCACCAFECsResourceTypecorrespondent.

  I also tried to do a com.vmware.library.vcaccafe.asd.customresources.createCustomResourceFromInventoryType ("VC:VirtualMachine"), then using this vCACCAFECsResourceType to create the resource action. It creates and publishes very well, but the action never shows in the vCAC UI (using the same rights as when using Infrastructure.Virtual).

  Any ideas? Thank you

  Greg

  This turns out to be just a question in 6.0.

  When I switched to 6.1, the entries in the 'Resources mappings' tab in the show of the interface user upward into the folder "ASD Custom Resources" in the inventory of the vCACCAFEHost and vCACCAFEEntitiesFinder.findCustomResources (host), returns with the mapped to 'VC:VirtualMachine' have good guid. This same method in 6.0 returns an empty array.