Get only the Apple logo on my iPhone 5 s

Similar Questions

• I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...

  I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...

  I did a reboot, nothing has changed.

  so the music app is an application by default/standard, it cannot be removed or reloaded.

• iMac 8.1 stuck on the apple logo

  Model: iMac8, 1

  2.66 GHz Intel Core 2 Duo

  At 2BG memory when the problem started

  Mountain Lion 10.8.5

  Is in trouble with occasional frosts. Would be closed and it should restart very well. About 2 weeks ago, the computer froze. I shut down the computer and restarted. The apple logo came with the spinning wheel, and then just the apple logo.

  I can start safe mode. Tried resetting the PRAM, reset of SCM. Tried to start with all peripherals except keyboard and mouse disconnected. Use the command R to start the computer and went into the disc utilities. Disc checked and it said disc looks OK. Verified permissions. Mistakes came for iTunes more a warning which was not repairable. Fixed permissions. None of these permits to start properly.

  Parle talked anyone computer repair who suggested to unplug the computer, hold the power button while up to one minute, plug the computer back in and pressing the Start button. It came in fine. A few days letter that the computer froze and I had to stop it. You press the Start button, got the spinning wheel, so only the apple logo and apple logo. Start the computer by pressing command + R and reinstalled Mountain Lion. Installation once it stuck at the apple logo again. Active disk. Drive seems to be OK. Permission verified. Permission with iTunes but issues no warning this time. Repaired permissions. Nada.

  Inserted the installation disk, turned on the computer while holding D key. A ran Apple Hardware tools (tests of short or long). This error message came up twice with different numbers of rpm: 4MOT/1/40000003: drive HARD-110. I know that it's the hard drive fan. Computer repair man came out. Thought problem may be because I only had 2 GB of memory and ran only to open the Lion of mountain with several programs. Upgrade to 4 GB memory, which is recognized by the computer. But the computer still does not start correctly. Tried the Single Mode and run/sbin/fsck - fy. Said it seemed OK, but changed the volume. Ran he says once again and everything seemed OK. Still will not start.

  When I start in the disc, part of the grey background Utilities is missing. If you move the cursor on the screen, the gray background fills.

  Also, when I try from normally I get startup chime, the apple logo and the spinning wheel. After that make a spin the wheel stops, there is sort of a Flash, then the wheel goes and remains the apple logo. I can hear the computer tries to do something, then the arrow cursor appears and can be moved around the screen. It's like that.

  Also installed Mountain Lion on a USB key, it made the startup disk and tried to start the computer normally. Still will not start.

  Any ideas or suggestions for what could be wrong or other things to try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• iPhone 5 Gets the apple logo, but does not start

  My iphone 5 won't start/start. Appearance of the Apple logo on a black background, but eventually, the screen will Dim. The last update of the operating system has not happened because she would not complete the upgrade process and I gave up. Any recommendations?

  Charge the battery for at least 30 minutes, then force restart your iPhone.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

• PowerMac G4 - Boats only for the Apple Logo. Nothing else.

  Hello

  So I have a PowerMac G4... Yes old enough. Well its been all this time working and I like it a lot.

  But today, it is consumed only until the Apple logo. and nothing else happens. Ive done some methods to try to get it working again. He acknowledged that the HARD drive is there and I can select. But that's about it.

  I should also mention that I have not the keyboard or the original mouse. I have the keyboard of Windows so :/

  Shutdown

  Disconnect all external devices

  start in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  If you did specify that in your "I did some methods' which is without assistance, unless you can specify that only those who were.

• My IPhone 6 just died, when I plug only the Apple icon comes on the screen

  My IPhone 6 just died and I plugged into a charger, and only Apple icon comes and will not restart. Can you tell me what could be wrong with it?

  Could be a number of things. Have you tried leaving plugged for a good ten minutes and then force to restart? You would do that by pressing the home button and the lock for ten to fifteen seconds, button let go when you see the Apple logo again.

• IPhone 5 Asia showing the apple logo can be reset?

  I have an iPhone 5 s with a hardware problem. I can get into recovery mode and to connect to iTunes, restoring and updating seems to be the case, but the phone then uses the Apple logo when finished. It will not shut down.

  Any ideas?

  If your iPhone or iPad does not respond, try the steps here:

  https://support.Apple.com/en-us/HT201412

• iPhone 5s stuck on the loading with the apple logo bar

  my iphone 5 s is currently blocked on the loading with the apple logo bar, my home button does not work (I normally use assisstive-touch), ive tried connecting my phone to a laptop and then connect to itunes, but when I connect to itunes it say «to allow access, answer on your iphone» I don't know what to do and need my phone. Help, please.

  You must get the repaired Home button in order to connect to iTunes to sync or restore data.

  Help here > repair - official Apple iPhone Support

• iPhone 6 connected to load not - turn on the apple logo screen comes on and then directly back to the exit.

  I got my iPhone 6 during just over 1 year, I plugged it in to charge this morning and it lights up, it didn't he go on the apple logo and then turns off again. She does again and again that connected to load while but is not on. someone knows what's the problem? It will be under warranty? I can't use my phone at all, I left that he plugged for more than an hour and he just got really hot and kept the logo screen then off over and over again up to what I gave him upward and not trendy.

  You should get the verified device by visiting an Apple store or Apple authorized service next to your site provider, this issue seems to be hardware related.

  Apple iPhone - contact Support - support

  Find an Apple authorized service provider

• My iPhone 5 c is not light after gel problems and it comes up with the apple logo, and it ends and still will not come on, so help please?

  So I just watched a video on YouTube so I wanted to play a game so I clicked on the home button and when I did he was frozen, so I've been around by pressing the power and the home button at the same time and I did that turns off the coast as if it was supposed to do I he turned back and came up with the Apple logo as usual then it just turned off and I do fear and all I keep getting is turn it on and it is still is not turn on and my phone has had these freezing problems before, but never like this

  If your iPhone, iPad or iPod touch does not respond or won't turn on - Apple Support

• My iPhone 6 is stuck on the apple logo

  My iPhone 6 is stuck on the apple logo. If I put it to download it just stays like that or it stops and says it has no battery, even when plugged. I can't enter in recovery mode because my home button just stopped working out of the blue. I don't know what to do.

  Charge the battery for an hour and then try the recovery mode.

• My iPhone 6 more used to turn past the Apple logo

  I get the Apple, date and time, and the shot then it restarts again if I try to drag.

  Hello

  Follow these instructions...

  Make sure that your device is updated and your apps are up-to-date. If you still need assistance after update, contact Apple technical support.

  Learn what to do if your machine doesn't start after the Apple logo or unresponsive.

  If your iOS device restarts or the unexpected poster - Support Apple Apple logo

• I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

  I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

  Hello

  Follow the instructions here:

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

  I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• Dropped my iphone 6 in water, just the apple logo appears

  I dropped my iphone in the water two days back... I tried to turn off immediately, things would turn itself after a few seconds... I let it run out of battery, and finally he was out... I let it dry... Tried to remove the water forms all grooves... It's been 2 days now... I plugged it to load but it is now stuck on the apple logo. Nothing happens... For awhile, there was a red screen of death (I looked at the name) but now it's just the apple logo. This means - my phone is dead and needs a replacement? Any idea what I should do next?

  Shri.Chavda wrote:

  This means - my phone is dead and needs a replacement? Any idea what I should do next?

  That's right - you need to bring it to an Apple store or Service Center for repair for a replacement (the cost depends on what type of insurance you have and where you are - I mean what country) allowed