get rid of the logarithmic stop exercising

Similar Questions

• I can't get rid of the master password

  I check, I have untick, I updated, and I can't get rid of the requirement of a master password. It's so frustrating because it doesn't allow me to enter my username and password to a site.

  OnlyMe1959 said

  I check, I have untick, I updated, and I can't get rid of the requirement of a master password. It's so frustrating because it doesn't allow me to enter my username and password to a site.

  Sorry gang. My fault. It turns out that it is HP SimplePass who was not letting me connect. And trying to stop, it won't. I will contact HP.

• How can I get rid of the practice (news this morning) of messages that appear at the bottom of the Inbox message list when I don't want to see them?

  Until this morning, I could the cursor up and down on my list of the Inbox for messages I wanted to open (or delete without opening). Now, each message darn, the cursor stops on - or sometimes even just past above - appears below the line at the bottom of the list of messages. This means that I can't see so many messages listed at the same time as I could yesterday.
  I can get rid of the line (and the message that open automatically below) only by moving the cursor down on the line. I don't want to do that with every message that I make a break on or exceed. If I want to open a message, I'll open - it is not so difficult.
  I imagine that some people wanted this feature or that it would not have been installed. All I want is to be able to turn it off.
  Thanks for any help.

  Re; I guess that some people wanted this feature or that it would not have been installed. All I want is to be able to turn it off.

  There is no such feature added, because it would be ridiculous to implement.
  The problem you are experiencing is not a problem with Thunderbird.
  It is likely to be your mouse, mouse pad or keyboard.

  Emails do not open without a statement to open. That statement comes from the mouse, mouse pad, keyboard, then this is where to look.

  Either you're inadvertently clicking or your settings are too sensitive or maybe something is stuck, your mouse/keyboard mat is recording your action and act on it.
  Action comes from the mouse or carpets to mouse or keyboard and the computer includes an action is required and performs this action in Thunderbird.

  Determine if what you are doing when it occurs, what method to use and check the settings.

  I would go in your computer control settings to get for example: mouse pads
  and check the settings for sensitivity.

  If you use a mouse pad, it's too easy to press slightly harder and move cursor is interpreted as a left click. Check the sensitivity settings.
  Maybe your keyboard should be cleaned as keys become sticky.
  If you use a mouse, then make sure that your hands are not inadvertently pressing the buttons, the checksensitivity settings or maybe the mouse begins to fail, if not too sentive.

• How to get rid of the new menu button on the right side of the toolbar

  Honestly, I don't know why the developers cannot offer new features that we can use or not, by choice. Instead, things are forced upon us.

  Could someone tell me please how to get rid of the new menu button on the right side of the toolbar?

  It doesn't seem to be an option to remove via the Customize Toolbars window.

  Thank you very much.

  CTR extension makes Firefox customizable menu button 3 bar, so you can drag this button in the palette to customize to remove it from the Navigation toolbar.

  Reload and stop probably combine only if you set the two buttons in the correct order (reload - Stop and non-Stop - Reload)

• I want to get rid of the tab bar in firefox 3.6

  I tried to get rid of the tab bar in FireFox 3.6, but deselecting everything in the section of the tab Options will not stop them.
  Anyone know how to get permanently RID tabs?

  Download Tab Killer from here:
  
  http://piro.Sakura.ne.jp/xul/_tabkiller.html.en#download
  
  Click on - download the latest Version (via HTTPS, GitHub) / -then 'allow' on the yellow bar that appears at the top.

  Ver.2.0.2009110201, this is what should settle.

• How can I get rid of the pop ups telling me to update my Media Player

  Hello

  I can't seem to open all the links on Facebook or other websites without getting a pop up saying, «I need to update my HD media player» How can I stop this from happening? I tried to uninstall MacKeeper, Niceplayer and MacPlayer without success. I guess there are still a few hidden files somewhere on my computer that I have no idea how to get rid of. I also googled one forum mac how to get rid of the problem and within 5 seconds, I am immediately directed to a site that tells me I have to update my player. Help!

  Malwarebytes Anti-Malware for Mac has been developed by Thomas Reed, who is an expert of confidence on these forums.

  https://www.Malwarebytes.org/antimalware/Mac/

  It does not work in the background - when you launch it, it will detect and offer to delete the malicious files, then exit. You can run it again in the future if you suspect another infection.

  Matt

• How can I get rid of the Office 2007 trial and subsequent updates automatically downloaded Version

  Hi all.  I have a PC that came with the Trial Version of Office 2007.  I was very happy with Office 2003, so I loaded it up.

  Now, my PC automatically downloaded the service pack 2007 and whenever I go to open any document it asks for a product key.  I don't want the full version of Office 2007, so, how do I get rid of the trial version and stop things more than downloaded PC 2007.

  http://support.Microsoft.com/kb/928218

  "How to uninstall manually Office system 2007 if you cannot uninstall it by using the function" Add / Remove programs.

  Info on the link above should help you remove Office 2007 Trial.

  See you soon. Mick Murphy - Microsoft partner

• The Task Manager - I'm trying to get rid of the programs and files unnecessary

  I have more than 140 lines of running abuse. I'm trying to get rid of the programs and unnecessary files.

  When I am online the cpu is also the diagrams, and it doesn't take long before his stop at all

  Terry c

  Hello

  Use the clean boot method and Process Explorer to determine what are these services and, if applicable
  ask questions. Of course, check out the other methods as well to help improve the system
  performance.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I get rid of the icons in the taskbar I want

  Impossible to get rid of the icons in the taskbar of office.  That's what I tried:

  1. saw the video, I don't understand it.

  2. I don't know what, "jump list" is or how to find it.

  3. when I hit the icon I want to remove it from the task bar, I get a list of options / and / information, including, "unpin...» ». but it does not work, the icon remains in the taskbar.

  I do not understand the boxes below, I don ' t know what I'm supposed to select, never seen these labels (names?). So I chose randomly.

  Type of comment? What does that mean???

  I get a message that says that my email is bad, but he's not wrong.  I don't know HOW to find my email and change it.  I entered my email for Live Mail... and I don't know if it is the same as that of the "answers".   How to make a new email for that one message? >?>?>

  If "detach you" an icon in the taskbar, the icon will be is no longer attached to the taskbar - but it will always be displayed when running the program (just as running programs have always since Windows 95).

  It could be useful that you "detach" and then right click and choose 'close' to stop the program, which will cause the icon disappear until you run the program again.

• Difficult to get rid of the borders PopupScreen

  I put applyTheme to return nothing and still borders will not disappear.

  public class SplashDownloader extends PopupScreen
  { 
  
      private static GIFEncodedImage _image =  (GIFEncodedImage) GIFEncodedImage.getEncodedImageResource("ajax-loader.gif");
      private int _currentFrame;
      private static int _width=_image.getWidth();
      private static int _height=_image.getHeight();
      private int _xPos=(Display.getWidth() - _width) >> 1, _yPos=(Display.getHeight() - _height) >> 1;
      private AnimatorThread _animatorThread;
      public SplashDownloader() {
          super(new VerticalFieldManager()
          {
  
               protected void paintBackground(Graphics arg0) {
                  // TODO Auto-generated method stub
                  //super.paintBackground(arg0);
              }
              protected void applyTheme(Graphics arg0, boolean arg1) {
  
              }
  
              protected void sublayout(int maxWidth, int maxHeight) {
                  // TODO Auto-generated method stub
  
                  //super.sublayout(maxWidth, maxHeight);
                  setExtent(_width, _height);
              }
          }, Field.NON_FOCUSABLE);
          setBackground(
                  BackgroundFactory.createSolidTransparentBackground(
                          Color.BLACK, 0)); 
  
          // Start the animation thread.
          _animatorThread = new AnimatorThread(this);
          _animatorThread.start(); 
  
      } 
  
  protected void paintBackground(Graphics graphics) {
          // TODO Auto-generated method stub
          //super.paintBackground(graphics);
      }
      protected void paint(Graphics graphics) {
          for ( int i = 0; i <= _currentFrame; i ++ ) {
              graphics.drawImage(_image.getFrameLeft(i),
                                 _image.getFrameTop(i),
                                 _image.getFrameWidth(i),
                                 _image.getFrameHeight(i),
                                 _image,
                                 i,
                                 0, 0);
          }
      } 
  
      protected void onUndisplay() {
          _animatorThread.stop();
      } 
  
      protected void applyTheme(Graphics arg0, boolean arg1) {
              // TODO Auto-generated method stub
  
          }
      public void stop()
      {
          _animatorThread.stop(); 
  
      }
  
      private class AnimatorThread extends Thread {
          private SplashDownloader _theField;
          private boolean _keepGoing = true;
          private int _totalFrames, _loopCount, _totalLoops;
          public AnimatorThread(SplashDownloader _theScreen) {
                  _theField = _theScreen;
                  _totalFrames = _image.getFrameCount();
                  _totalLoops = _image.getIterations(); 
  
          } 
  
          public synchronized void stop() {
                  _keepGoing = false;
          } 
  
          public void run() {
                  while (_keepGoing) {
                          // Invalidate the field so that it is redrawn.
                          UiApplication.getUiApplication().invokeAndWait(
                            new Runnable() {
                                  public void run() {
                                          _theField.invalidate();
                                  }
                          });
                          try {
                            // Sleep for the current frame delay before
                            // the next frame is drawn.
                            sleep(_image.getFrameDelay(_currentFrame) * 10);
                          } catch (InterruptedException iex) {
                          } // Couldn't sleep.
                          // Increment the frame.
                          ++_currentFrame;
                          if (_currentFrame == _totalFrames) {
                            // Reset back to frame 0
                            // if we have reached the end.
                            _currentFrame = 0;
                            ++_loopCount;
                            // Check if the animation should continue.
                            if (_loopCount == _totalLoops) {
                              _keepGoing = false;
                            }
                          }
                  }
          } 
  
      }
  
  }
  

  BTW, there are three methods applyTheme. I guess the method empty arg takes care of it. Just an info.

      protected void applyTheme() {
  
          // do nothing
      }
  
      protected void applyThemeOnStateChange() {
  
          // do nothing
      }
  
      protected void applyTheme( Graphics graphics, boolean flag ) {
  
          // do nothing
      }
  

  If you're on 4.6.0 + you can also choose to create a class of border or background empty to get rid of the default theme borders. applyTheme() is incomplete.

• I don't want to use a password since I am the only one using my computer. How can I get rid of the password and does not have the locked computer?

  When setting up my new computer, I put a password so that the computer is locked. Now, I'm the only one using the computer and it's an embarrassment to have to put a password everytime I open my computer, even if it is not stopped. I know that there must be a way to get rid of the password. I would like to help you with this.

  See the link below:

  http://www.PCWorld.com/article/2015587/how-to-bypass-the-Windows-8-password-screen.html

• Classroom in a book - CS4 - Lesson 6 - cannot get rid of the noise

  I'm on Lesson 6 version CS4 classroom in a book. I worked on the image with the mother and child, but I can't seem to get rid of the noise in the mountains and the sky. They look very grainy. I've followed all the steps exactly and even went through screen shots to see if any setting have been changed which may not have been mentioned. I compared my version to the version 'End' and they seem very different. The mountains and the look of the sky much better in the "End" version, although the mother and child look more exposed. On mine, the people look much more sharp, but the noise in the mountains is terrible and the sky is also quite grainy.  I redid this part of the lesson about 6 times, four times on my PC and twice on a MAC, but the results are always the same.  The sharpness which lesson you do at the end, while improving certain parts, the granulation in the worst of the sky and the mountains.

  This has been very frustrating.  Clearly something more was done with the image of 'End', which was not in the lesson.  Even if people, in my opinion, look better in my finished version, the mountains and the sky look terrible, and the background was the entire point of the lesson. Does anyone have ideas, what has been done to make the smooth background to the image of 'end '?

  I dug my copy of PS CS4 classroom in a book and went through the same lesson to see what results I got.  I can confirm that the noise reduction is not optimal.  See the example in the picture 'after ':

  

  Compare with the results of a 3rd party plugin noise reduction (in this case Topaz Denoise) using a standard preset:

  

  This version needs a bit of sharpening is to the people.

  In doing this exercise that I was reminded why I dislike the Classroom in a Book series.  It makes you go through the steps like a zombie, tell you what value to enter in each field, but it does not often do the fields. Certainly, as a reader, you are free to experiment, but which do not encourage lessons. And the fact that the results do not always match the book and readers are disappointed when the results do not confirm my opinion that the book is not encourage experimentation.  Perhaps a further reduction of noise was made for each channel in the Advanced setting of section.as described in the box of Lesson 6.

• Anyone else want to get rid of the words "Press to open" on the new lock screen?

  Is there a way to get rid of the words, "Press to open" on the new lock in iOS10 screen? I really don't need to be reminded every time how to unlock my phone, not to mention that I think that they look ugly.

  Tell Apple

  feedback line

• How to get rid of the app iOS 10 beta feedback?

  I made the beta of iOS 10, and it came with the app of feedback. I updated my phone to the iOS version final 10, but the feedback app is still on my phone. I tried now button but no little 'x' appears. Can someone please.

  You go to settings > general > profiles. Then, select the Beta iOS 10 profile and delete it. This will remove your device from the 10 future iOS betas and get rid of the app of Feedback.

• How can I get rid of the message air play?

  How can I get rid of the message air play on 4th gen apple tv?

  MSG continuously appears on the television screen while screen saver is turned on by using apptv 4th gen