Get the container element

Similar Questions

• How to get the container of the grid Center in a browser

  How to get the container of the grid Center in a browser

  . Grid {}

  width: 80%;

  margin: auto;

  }

• How do I get the separate elements of a table in a bean method?

  Hey everyone, how are you?

  I use Jdeveloper 12.1.2.0.0.

  I have a bean method that gets the items on a table-adf and I need the separate elements (of a given attribute) this table to highlight in the other table.

  For example: my table elements:

  ID name Tecnolgy

  1 oracle ADF

  2 oracle Jdeveloper

  3 Microsoft Visual Studio

  And I need the separate names in this table:

  Oracle; Microsoft

  So I highlighted them in another table.

  Normally I use an iterator and I will one by one and highlight what I want (as you can see, with a large table it can take a long time) and I wanted only to get the separate elements.

  My method of beans as something like this:

  DCIteratorBinding conIter = ADFUtils.findIterator ("VFactSalesNewView1Iterator");

  Line r [] = new Row [conIter.getAllRowsInRange () .length];

  r = conIter.getAllRowsInRange ();

  for (int i = 0; i < conIter.getAllRowsInRange () .length; i ++)

  {

  long productsInt = (Long) r [i] .getAttribute ("FkProduct");

  ...

  matchEmFactSalesProducts (r [i]);

  ..

  }

  I was wondering if it was possible to put a query and return the items in the request as lines (as I do with the iterator) or another possibility here.

  The request for my first table (the one in the example) is the following:

  SELECT VFactSalesNew.N_SALES,

  VFactSalesNew.QUANTITY,

  VFactSalesNew.ID_ANO,

  VFactSalesNew.QUARTER

  OF V_FACT_SALES_NEW VFactSalesNew

  WHERE

  ((nvl(:var_dimCoin,'0') = '0' OR FK_COIN IN (select * from THE (select cast (in_list(:var_dimCoin) as mytableType) double) a)))

  and the table I emphasize only has a select * from tableX;

  Any ideas?

  Kind regards

  Frederico.

  Hi Frederico,

  Hope you are well. Your VFactSalesNew table is filtered by any chance? Approach, you could do is to try to create a new VO with the following query:

  SELECT DISTINCT (yourTable.NAME)

  From yourTable

  But if your table is filtered, then I recommend you create a method in your implementation ViewObject that returns a LIST and there you iterate over the result set. In all cases, you will need to browse the whole list to get distinct values.

  Concerning

• Cannot access a Web site, HTMLParsingError unable to change the container element parent before the child element closed

  When I go to Geaowarehouse a site to check the properties and assessments

  I can't get the information

  This message appears when I click on the yellow triangle at the bottom LHS

  HTMLParsingError unable to edit the item container parent before the child element is closed

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/HTML-parsing-error-unable-to-modify-the-parent/e64759e0-D344-42d6-b1d8-0ce27504dd71

• How to create the container element using Vi types in teststand

  Hello

  I want to create containers in the Array element in teststand, which different downhill element. for example I like, .txt file

  Name height, age, color

  A, 20, 186, black

  B, 30 170, white

  first line should be elements of the container, and the second line should be the value of the element. Raising must be string, number or boolean.

  Then, in the second container to new element in the first row and value in the third row.

  And all this container must be below the table of the fileglobals element or people of the country.

  Is there any suggestions how?

  Thank you much in advance.

  Kind regards

  Ankit.

  Hi Pierre,.

  I edited your VI test and successfully wrote the table of container to a variable existing non "Locals.dummy99" (see screenshot).

  Best regards

  Christoph

• VI script: get the duplicate element reference

  In the scripts of VI I copy element (any type of indicator, the constant control) with the Move method with the duplicate property - true. The top right Terminal output of the method is the reference to the source, not a new object.

  Is there a simple way to get the reference to that copy (another copy method, etc.)?

  Simple solutions not (they can work on test, but not good examples)

  1) move into temporary cluster - easy to find a new element

  (2) see all before, after and compare lists. But the source VI can be of any size and complexity.

  (3) item Create manually copy: bad, the solution should work on all types of items.

  I would use the method VI create reference in this situation.

• Old laptop broke, lost CD to install it, but have the serial number, how do I get the PS Elements on my new computer laptop?

  Hello

  My old laptop was able to break on me, so I had to get a new one. Initially, I bought a tablet of bamboo comes with Adobe Photoshop Elements 5.0 (it happened quite earlier, in fact). I searched the CD install on my new laptop, but I failed to find it and after going through my room throughout the whole garage and cellar, I came to the conclusion that it's probably lost for good. It seems too have registered my product before, but I don't remember my old Adobe ID or password or anything. Also, I had to change emails because my old one hacked, so the email associated with all that was my former Adobe ID is now useless for me. However, I still have my serial number of the product, and I want to know if there is any way I can get possibly the items on my new laptop without having to pay for it. I was actually very happy with Elements 5.0, I don't really care get the version update unless necessary somehow. Is there a way this can possibly be done? Any help is appreciated at all very well.

  Also, my old laptop is a Toshiba PC laptop, and now I have a laptop Dell PC, so no Mac for me. Not sure if this is relevant, just thought I should probably include just in case.

  Thank you!

  Unfortunately, the oldest available version of Photoshop Elements is version 7.  I don't know of any resource to download version 5.

  If it is doubtful that the former of a version would work on a new machine.

• How to get the 6th element of a C.V. value column

  Hi all

  I use Oracle Business Intelligence 11.1.1.7.131017.

  I have a column with the following formula: C.V. ("Tickets". "Number of tickets"), but since we want to only show the values advocated by the past 6 months and which is an accumulative column, we added the rank function in the filter and placed as: grade (C.V. ("Tickets". " Number of tickets')) < = 6 and for the final formula, we need the minimum value that is placed in 6th place...

  My problem is how to get the value assigned to this position?

  Here's the column values:

  30719 (value I pretend-> min)

  31357

  32025

  32595

  33652

  34616 (I also use this value-> max)

  Any idea on how to get the value placed on tier 6?

  Thanks for the help and have a good week.

  Kind regards

  Frederico.

  I found a solution (poor, but it works)...

  As a minimum I want is always located in the row = 6 I put a case when row = 6, then returns the value I'm pretending, else return 0, so after that I need only the max of all values, as they are 0 or the value that I'm pretending, like this:

  MAX (CASE WHEN (GRADE (C.V. ("Tickets". "Number of tickets')) = 6) THEN of C.V. (FILTER ("Tickets"." Number of tickets' using 'status '. ((("" Resolved "="Resolvido")) END ELSE 0)

  I want to thank you all for the help, normally I post in the forum of the ADF but its good to know I can get a lot of support here as well...

  Many thanks to all,

  Frederico.

• How to get the name element and xml comment in a page?

  I need to list all the name element and comment on a page

  You can use below methods.

  IXMLUtils::GetElementIndices()

  IFrameList::QueryFrameContaining()

• How to get the first element of a list?

  Hello
  
  I have the following hierarchy:
  
  A (first level)
  -A1 (A child)
  -B1 (A child)
  -B11 (B1 child)
  -B12 (B1 child)
  
  I have a UDA on B11 and B12 members who have the same name as the A1, and I want to assign values to A1 to B11 and B12. After that, I want to consolidate the hierarchy so I can have B1 and with values.
  
  I would like to use the ancestors function to do but the ancestors need a member as a parameter and the only relationship between A1 and B11, B12 is the UDA.
  
  I can't do @ANCESTORS (@UDA (%{dimname/}, 'A1')) because of this, so I would use a function to get at least 1 member with the UDA, I want and use ancestors on this subject, but I can't seem to find a function that returns the first member of a list.
  
  Can someone help me on this?
  
  Thank you

  Bummer, I finally shot to the top of my 11.1.2.1 instance of cloud and tried. You have (unfortunately) reason - I can spend real members names in @LANCESTORS and use it outside of a DIFFICULTY, but the minute I put in @ATTRIBUTE or @UDA he has poured out. Disappointment, because I thought that was a really cool thing.

  I think still if you know z is always the parent you want to consolidate, a @IDESCENDANTS("Z") would do the trick, but maybe with inefficient - certainly less than a full size AGG.

  Kind regards

  Cameron Lackpour

  Published by: CL 4 June 2012 10:13
  Arrgh, and it's in the docs with underlining added by me:
  If the function @LANCESTORS is used alone (not in a statement to FIX), you must use the function @LIST and specify names of members.

• How to get the child elements of the ArrayCollection collection?

  Hi all

  I want to analyze collection ArrayCollection and want the child node element.

  How to parse the arraycollection collection?

  for (var i: int = 0; i<>

  {if (arrayCollectionObject.getItemAt (i). Item is "requireditem")}

  your code

  break;

  }

  }

  Let me know if it helps

• Unable to get the element of the array by LabVIEW table Handle in DLL

  vc code follows:

  #include "extcode.h".

  / * LabVIEW created typedef * /.
  typedef struct {}
  dimSize of Int32;
  Double elt [1];
  } TD1;
  typedef TD1 * TD1Hdl;

  extern "C".
  {
  _declspec (dllexport) void CINRun (TD1Hdl input, double * output);
  };

  _declspec (dllexport) void CINRun (TD1Hdl input, double * output)
  {
  Failed to get the first element of the array passed to DLL LabVIEW
  * Output =(*Input)-> elt [0];

  If change the above code as follows
  * Output =(*Input)-> dimSize;
  It is then managed to get the size of a dimension table.
  So, what's the problem?
  }

  the labview vc and program project are attached.

  the problem is: run the program labview, can not get the good result of the table

  Thank you

  Chen

  You have made two errors:

  Error 1 (alignment!):

  

  Error 2: passing parameters:

  

  Change it as above, and it should be OK.

  Andrey.

• How to get the Max of elements of type datetime value

  Hi all
  I wanted to get the last value timestamp (DateTime data type) of the node list. I have the following xml. In this xml file, I want to get the modifydate element that has the last time stamp via xquery/xpath, it should return me following result 2011-09-29 T 17: 21:17 + 10:00
  
  < CustomerList >
  < CustomerDetails >
  < Name > Test 1 < / name >
  assets of < status > < / status >
  < modifyDate > 2011-08-20T 17: 21:17 + 10:00 < / modifyDate >
  < / CustomerDetails >
  
  < CustomerDetails >
  < Name > Test 2 < / name >
  Cancel < status > < / status >
  < modifyDate > 2011-08-29T 17: 21:17 + 10:00 < / modifyDate >
  < / CustomerDetails >
  
  < CustomerDetails >
  < Name > Test 3 < / name >
  assets of < status > < / status >
  < modifyDate > 2011-09-29T 17: 21:17 + 10:00 < / modifyDate >
  < / CustomerDetails >
  < / CustomerList >
  
  
  I tried to use the
  CustomerList/CustomerDetails/modifyDate [not (. < =... / the above - sibling:CustomerList/CustomerDetails modifyDate) and not (. < =... / following - sibling:CustomerList/CustomerDetails modifyDate)]
  But it does not work on the datetime data type.
  Any help in this regard is highly appreciated.
  
  Concerning
  
  Published by: user6736659 on Sep 5, 2011 06:15

  Hello

  The following XQuery query should give you what you want:

  max(
   for $i in /CustomerList/CustomerDetails/modifyDate
   return xs:dateTime($i)
  )
  

  For example, by using Oracle SQL:

  SQL> var xmldoc varchar2(4000)
  SQL> begin
    2   :xmldoc := '
    3  
    4   Test 1
    5  active
    6  2011-08-20T17:21:17+10:00
    7  
    8
    9  
   10   Test 2
   11  cancel
   12  2011-08-29T17:21:17+10:00
   13  
   14
   15  
   16   Test 3
   17  active
   18  2011-09-29T17:21:17+10:00
   19  
   20  ';
   21  end;
   22  /
  
  PL/SQL procedure successfully completed
  
  SQL> select xmlquery('max(
    2   for $i in /CustomerList/CustomerDetails/modifyDate
    3   return xs:dateTime($i)
    4  )'
    5  passing xmltype(:xmldoc)
    6  returning content
    7  )
    8  from dual
    9  ;
  
  XMLQUERY('MAX(FOR$IIN/CUSTOMER
  --------------------------------------------------------------------------------
   2011-09-29T17:21:17.000000+10:00
   
  

• How do I get the width and height of an external image

  Hello

  lets say I want to get the width and/or height of this external image (it could also be an external file on my hard drive): http://www.icatcher.com/wp-content/uploads/2013/01/Adobe.PNG

  I create a button and add an onClick function that says:

  var externalImageWidth = ???
  alert(externalImageWidth);
  

  How can I do (so to speak dynamically?)  without the addition of the image itself to my library or put it on the stage?

  All my attempts said 'indefinite' or '0' or they simply do not work.

  Thanks in advance!

  You can try the following (assuming that there is a dummy container with id mydiv = div),

  var img = new Image();

  IMG. OnLoad = function() {}

  SYM. $("mondiv") .attr ("width", this.width) .attr ("height", this.height) .append (this);

  };

  IMG. SRC = "http://www.icatcher.com/wp-content/uploads/2013/01/Adobe.png";

  Modify the code according to your need for the selection of the container element.

  DIA-

• Find the table if element have the same element in all indexes

  Hello

  I need to check if a table have the same element in all its indexes. (Example: an array of size 4, should have index 0... 3 1 and during the next iteration index whether no. 2 overall indexes...) How can I check if all indexes have same number)

  Attached to the VI I did.

  Anyone can offer better than this.

  

  get the first element, compare it with the hole dashboard, AND all items