Get the error message about the file cCNColms.dll missing at startup.

I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

Read these instructions carefully and see what you can find:

It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
Here are the detailed instructions that protect you and solve your problem in the 'right' way.
There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
Here is a link to a popular registry backup tool:
You can also use the Autoruns to find the element of start remains little matter where he's hiding
.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
.  You are really interested only a few sections.
The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
Scroll through the list and look for a boot entry associated files in the error message.
If you can't find on the connection tab, look in any tab.
You can also click file, search to search for logon, or any tab for all or part of the name of the element.
Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
Given that you had or have an infection, followed with this:
Perform scans for malware, and then fix any problems:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
They can be uninstalled later if you wish.
Restart your computer and solve the outstanding issues.

Tags: Windows

Similar Questions

  • pixel shader - get an error message about the 2.0 pixel shader

    Why do I get an error message about the 2.0 pixel shader and how can I solve this problem

    This indicates that your video card is not capable of using pixel shader 2.0 technology.
    Check that your video card is compatible with the minimum requirements of the game or software you use.

  • When I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message.

    samcli.dll

    I try to use Netflix... It worked last night and when I went to play today it asked me to install Silverlight... when I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message. I tried to uninstall Silverlight and reinstall it using Revo Uninstaller Pro and still, I get the same error message. You can provide any help would be greatly appreciated.

    Thank you

    Lisa

    samcli.dll is associated with Security Accounts Manager Client and not with Silverlight.

    Download this dll from here: -.

    http://www.dllme.com/dll/files/samcli_dll.html

    Now, replace the dll file that is corrupted with the dll file you downloaded here: -.

    C:\Windows\System32

    [Note: it is a hidden file, so you must enable Show hidden... files]

    [Organize--->---> the folder options view and search]

  • When I start my computer I get an error message about V protect Application on the Windows XP-based computer

    When I start my computer, I get an error message, "V Protect Application has encountered a problem and needs to close".

    System information Utility version 1.0.0.1

    OS version: Microsoft Windows XP Home Edition, Service Pack 3, 32-bit

    Processor: Intel (r) Celeron (r) CPU clocked at 2.66 GHz, x 86 Family 15 Model 4 Stepping 1

    Number of processors: 1

    RAM: 1 GB

    Graphics card: RADEON 9250, 128 MB

    Hard disks: C: Total - 76316 MB, free - 47785 MB; KC: total - Mo 305168, Free - Mo 304760;

    Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, P4M266-8233,

    Antivirus: AVG Free Antivirus, update: Yes, On-Demand Scanner: enabled

    I run the above system and would appreciate any help with the removal of this message as if I don't send it to Microsoft, it goes.

    Thank you

    Roy.

    You can try those Microsoft committed the 'experts' ideas Support Engineer (1, 2, 3) for safe, clean boot Mode, Online Scanner, but I think that most of the people who know how XP would recognize that there is no component 'V protect' in Windows XP and a simple search Google reveals that your problem is with your AVG software and has nothing to do with Windows XP.

    You should look in their forums (like me) and here's what they suggest:

    Vprotect belongs to AVG Security Toolbar.
    Please try to run repair installation using the latest installation package.

    If the problem persists, please follow all the steps in the instructions to complete reinstallation .

    I think that if I were you, I would follow the instructions on the page AVG to uninstall and reinstall your AVG because there may be other parts of AVG who are afflicted that you have not yet discovered, but in AVG, some people with V forums protect problems find that AVG repair install works.

  • When you uninstall a previous version of the player, I get an error message about the paths of transformation

    I tried to uninstall the version 8.1.2, and I get an error message to check that specified transform paths are valid. Some body please help. I could use the 90 MB of space, he resumes.

    My system is a laptop, vista 32-bit. No problem of security update is involved. I'm running version 10 and just want some memory back.

    If you feel you need to clear 90 MB. I suggest to get an additional storage medium (external HD,...). In any case, you can try the following:

    Run this fix from Microsoft: http://support.microsoft.com/mats/Program_Install_and_Uninstall

    Uninstall the reader using Add/Remove programs

  • How to get the file ConnAPI.DLL?

    How can I get the exe to ConnAPI.DLL?

    Hi bluegalacticos,
     
    -Do you get any error message related to the ConnAPI.DLL file?
     
    -If Yes, specify exactly a transcript of the message that you receive?
     
    -Do you have program Adobe Photoshop Elements installed on your computer?
     
    If Yes, here is a link that might help you solve the problem:
     

  • I get an error message when moving files NAVE LR4

    I am restructuring my file in LR4.  I can move JPEGs from one folder to another, but I get an error message when I try to move the NEF files.  I saw another discussion which mentions that Lightroom has a problem of moving the NEF files.  I don't have still a large collection (less than 10,000 images), but I made changes to a large number of shots so I don't want to import them from scratch once again.  Any thoughts?

    And could you move a JPG to this same exact issue?

    My guess is that it is somehow a permissions issue, you do not have permission to write to this folder (Yes, I know it sounds strange and I'm not entirely understand is 100%). The only other thought I have is that, somehow, the file is write protected and cannot be moved until you remove the write protection.

  • I get an error message about the Core.dll

    When I try to open a file, I get a fatal error message.  Acrobat failed to load the DLL base.  What can I do to fix this?

    http://helpx.Adobe.com/Acrobat/KB/reader-core-dll-error.html

  • I get an error message about the virtual device Drivers__as said in the body - section add details below.

    SYSTEM\CurrentControlSet\Control\VirtualDeviceDrivers. VDD. format of pilot of virtual device in the registry is invalid. Choose 'Close' to terminate the application.

    You try to run an old MS-DOS program in Vista?

    "16-bit programs are not supported on 64 bit versions of Windows Vista or Windows 7."

    Some 16-bit DOS programs and the command prompt does not work in mode full screen in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/926657

    If it is not something like the above, you may have to get clarification on what you try to do when you see this error message.

    http://www.Google.com.au/search?q=virtual+device+driver+format+in+the+registry+is+invalid&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = yCCMS_bsGoze7APkzKSzDQ

    How to troubleshoot a program that does not run as expected once it is installed on Windows Vista
    http://support.Microsoft.com/kb/931362/en-us

    Make older programs in this version of Windows
    http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

    Windows Vista Compatibility Center
    http://www.Microsoft.com/Windows/compatibility/details.aspx

  • where can I get the file dlbtmcro.dll

    computer said I need file dlbtmcro.dll.  Where can I get?

    This seems to be part of the package of driver scanner for a Dell all-in-one printer.

    Reinstall your Dell printer.  See A section for directions.

    Normally, you should go to Dell for pilots: http://www.dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection?fkey=Drivers_PS

    However, in the search for your file name, a website says that it was the driver for the Dell AIO 922.  If the printer you have, Dell seems to have abandoned the XP drivers for this model and has the Vista drivers.  I couldn't find drivers Dell 922 on third-party sites, such as http://dell.driversdown.com/dell-drivers-downloads/Dell-Photo-All-In-One-Printer-922_8587.shtml download drivers on these sites at your own risk.

    Can also ask in the forum of Dell printers: http://en.community.dell.com/support-forums/peripherals/f/3528.aspx

  • If I uninstalled Adobe, why that I get an error message about Adobe projector?

    I'm trying to activate a game I installed but get the message "Adobe projector has stopped working". I have tried everything to fix it, even completely uninstall Adobe, but the message remains displayed.

    Hello

    You can follow the methods that can help you resolev your question below:

    Method 1:

    Try to temporarily disable all security software and check if it helps.

    For more information, visit the links below:
    http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Also perform the following steps.

    Try these steps and check if this helped:

    1 left-click on start
    2 - right click on computer
    3. left-click on properties
    4 - left click on advanced system settings
    5 - running, click settings
    6. left click on the parameters of Performance data
    7 - click TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY.
    8. click on apply and then OK.

    Method 2:
    Alternatively, you can try to install in clean boot mode and check if that helps.

    Steps to start in clean boot mode:

    1. click on start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.
    3. under Selective startup, clear the check box load startup items.
    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
    5. click on OK.
    6. When you are prompted, click on restart.

    http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

  • I am trying to create an image of my computer on an external hard drive, but I get an error message: 0 x 8007003 path is missing

    I used to assess the problem, but it is Mr. fix: component of windows update is missing and he fixed it.  Still, I can't back up the C: drive.

    Hi Angela,.

    What operating system you have installed in the computer?

    This problem occurs if you save a library that contains custom folders that are located under your user profile. Please refer to the article to resolve the problem. The instructions apply to Windows Vista or Windows 7.

    Method 1:

    Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
    http://support.Microsoft.com/kb/973455

    Method 2: Temporarily disable the security software and firewall settings and check if the Internet connection drops.

    Disable the anti-virus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    For reference:
     
    Considerations when creating a system image

    http://blogs.technet.com/b/filecab/archive/2009/10/31/learn-more-about-system-image-backup.aspx

    Post back if the problem persists, we will be happy to help you.

  • When turned on the computer he get an error message ' missing < root windows > \system32\ntoskrnl.exe.

    Hi, I replaced the motherboard in my computer, it seems to work very well, but when you turn on the computer I get an error message:

    \SYSTEM32\NTOSKRNL.exe is missing or damaged

    At this stage there is no cursor, or what I can do to get in my area on my drive, it's as if the computer shuts down and this message does not disappear.

    I am running Windows XP operating system.

    Is there a solution for this?

    Thank you

    Hello

    · What is the number and the model of the computer?

    · What is the service pack installed on the computer?

    Follow the steps in the link below and check if this can help: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477

  • When you try to install Acrobat Professional, I got a msg of error saying it couldn't find the file adobepdf.dll of Vista.

    adobepdf.dll

    Hi, I have Vista & Adobe Creative Suite 3.  When you try to install Acrobat Professional, I got a msg of error saying it couldn't find the file adobepdf.dll of Vista.  What can I do to install Acrobat Professional?  How can I get the file adobepdf.dll for Acrobat to install?  Thank you.

    It is similar problem discussed in the following link. Have a look at. Could help you.
    http://kb2.Adobe.com/CPS/401/kb401731.html

  • error message; C:\Windows\System32/igfxres.dll

    Hi, I keep getting this error message c:\Windows/system32\igfxres.dll is not designed to run on windows or it contains an error.

    I am running windows vista Home premium. Can someone please help?

    The file belongs to your Intel video drivers. Install the latest version. Bring:

    1. site of the device mftr. ; OR
    2. site of the card mother mftr. If the material is on board; OR
    3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

    Read the installation instructions on the Web site where you get the drivers.

    To find out what hardware is in your computer:

    1. read all documentation that you got when you purchased the computer.
    2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
    3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

    http://www.belarc.com/free_download.html - Belarc Advisor
    http://www.gtopala.com/ - System Information for Windows

    MS - MVP - Elephant Boy computers - don't panic!

Maybe you are looking for