Get the height of the Manager in advance

Similar Questions

• How to get the Manager to update with VMware vCenter Server 5.0 device

  Hello

  We have VMware vSphere Essentials 5 and already, I downloaded the vCenter device but how get the Update Manager?

  Thank you.

  Hello

  If you want to use the Update Manager you will have to be installed on a separate windows server, the device has UM built as of yet.

• How to get the Task Manager recognize image after upgrade to dual-core

  I have improved the fron of processor Intel Pentium G3240T (Haswell) 2.7 GHz Dual - Core of Intel Core i5 - 4570T (Haswell) 2.9 GHz Quad Core. HP Pavilion 23-g120t CTO of all-in-One desktop PC is running windows 8.1.

  Devic Manager shows 4 core, but the Task Manager does not work.

  There need a configuration file updated to benefit for the quad core?

  How can I get the Manager tasks recognize four hearts?

  I restored the system with recovery CD and tried the msconfig by selecting 4 processors with no luck.

  Here is the link to the card mother deatiling all taken CPU model supported.

  HP Pavilion 23-g120t CTO all-in-One desktop PC

  http://support.HP.com/us-en/document/c04014873

  Thank you!

  Looks like that the plateau of the ony processor version supports two hearts. Thank you!

• move the focus from the field to the Manager

  Help!

  I have a HorizontalFieldManager with some fields inside. When I touch on the hfm, I want that he win the tune-up. Everything is fine with the BlackBerry without a touchscreen. I can scroll all hfms.

  But when I touch on the subject of the focus in the hfm gain the focus and not the hfm. How can I change?

  When I want to get the Manager on the ground and give it focus that nothing changes. Call this.setFocus () in the manager didn't make when press the subject field of the focus. When I touch outside the scope of field, everything is fine!

  I have no idea!

  Can someone help me please?

  Concerning

  When the fields are non-Focus, you can still have a NullField focusable.

  a non-trivial alternative might be to manually indicate the development of the manager through the methods onFocus() and onUnFocus() of the field that is getting the focus

• I can not sincronize my Blackberry Desktop Manager with Windows Live. I get the message "unknown error reported" How turn off the connected BlackBerry smartphone advanced power management features

  I'm on resolution 5, I used four different resolutions and none of them work, and I do not understand how to apply the meanless 5. Resolution 5

  Turn off the connected BlackBerry smartphone advanced power management features. For more information about how to disable the USB selective suspend feature in Windows, visitMicrosoft Help and Support site and search for "disable usb selective suspend."

  See if http://support.microsoft.com/kb/902274 help
  --
  ..
  --
  "andresgn" wrote in message news: 9754 c 356-97ed-4b9f-8dc5-c3318a6dc60b...
  > I'm on resolution 5, I used four different and no resolutions are
  > work them, and I do not understand how to apply the meanless 5.
  > Resolution 5
  > Turn off the connected BlackBerry advanced power management features
  > smartphone. For more information about how to disable the selective USB
  > suspend functionality in Windows, see the Microsoft Help and Support site
  > and look for "disable usb selective suspend."
  >
   
   

• Get the height and width of an image

  I have therefore some images in my program that I'm loading. These images are much longer than the size of the screen. So I put in a ScrollView. My question is how can I get the height and width of an image. The image.width and image.height doesn't return the correct values.

  //add the image
  private function addImage():Container {
      var sp1:Container = new Container();
      sp1.sizeUnit = SizeUnit.PIXELS;
      sp1.debugColor = 0xFFFFFF;
      sp1.margins = Vector.([1,0,0,0]);
      sp1.align =ContainerAlign.NEAR;
      //sp1.setSize(650, 800);
  
      var myPattern:RegExp = / /g;
      var fileName:String = "./com/swiz/img1.png";
      var icon:Image = new Image();
      icon.setImage(File.applicationDirectory.resolvePath(fileName).url);
      //icon.setPosition(0,0);
      //icon.setSize(320,800);
      sp1.addChild(icon);
      sp1.setSize(650, icon.height);
  
      return sp1;
  }
  

  and my code scrollview is

  //add to the scrollView
  var scroller:ScrollPane = new ScrollPane();
  scroller.width = 650;
  scroller.height = 505;
  scroller.y = 0;
  scroller.addScrollContent(addImage());
  addChild(scroller);
  

  Thanks in advance!

  Hey shethab,

  in order to retrieve the height and width of your image, you must use use the an event listener on your image and check for the Event.COMPLETE event. What is happening because the image you upload is not built, it takes time to load into your application using the setImage() method. and when you check the width height after the setImage method, the image was not loaded and has no height and width to this second. If you use the event listener, you can retrieve the height and width as it was finally loaded.

  Try the following code:

  import flash.events.Event;
  
  //add the image
  private function addImage():Container {
      var sp1:Container = new Container();
      sp1.sizeUnit = SizeUnit.PIXELS;
      sp1.debugColor = 0xFFFFFF;
      sp1.margins = Vector.([1,0,0,0]);
      sp1.align =ContainerAlign.NEAR;
      //sp1.setSize(650, 800);
  
      var myPattern:RegExp = / /g;
      var fileName:String = "./com/swiz/img1.png";
      var icon:Image = new Image();
      icon.setImage(File.applicationDirectory.resolvePath(fileName).url);
      icon.addEventListener(Event.COMPLETE, onImageLoaded);
      //icon.setPosition(0,0);
      //icon.setSize(320,800);
      sp1.addChild(icon);
      sp1.setSize(650, icon.height);
  
      return sp1;
  }
  
  private function onImageLoaded(e:Event):void
  {
      trace("image height: " + e.target.height + " image width: " + e.target.width);
  }
  

  hope that somethings brightened. Good luck!

• Get the component Id in managed bean

  Hi experts,

  I ask a stupid question, but as I'm a newbie, I hope you will forgive me .

  I use JDev version: 11.1.2.3.0 My question is: is it possible to get a component inside a managed bean id? By components, I hear, buttons or menu items. The scenario, I want to create is:

  I use JasperReports to generate required reports. I would like to have something like a Menu with different elements. By clicking on each of them, set a string in the managed bean I use to generate reports (in fact the string would be the name of the jrxml file I'll load). And this string would get its value based on what menu item is selected.

  Is it possible to do such a thing? Or maybe another way would be more appropriate?

  Thank you in advance!

  Hello

  Then, when you press a menu on the page item, have a method called (all menu items call this action method), this method gets the Id (or maybe something else) of the menu item called him.

  Do not use the action property but the ActionProperty listener. Then the ActioneEvent in the managed bean method you navigate to the item getUIComponent() and call getId on it. This should solve the use cases

  Frank

• How do I get the width and height of an external image

  Hello

  lets say I want to get the width and/or height of this external image (it could also be an external file on my hard drive): http://www.icatcher.com/wp-content/uploads/2013/01/Adobe.PNG

  I create a button and add an onClick function that says:

  var externalImageWidth = ???
  alert(externalImageWidth);
  

  How can I do (so to speak dynamically?)  without the addition of the image itself to my library or put it on the stage?

  All my attempts said 'indefinite' or '0' or they simply do not work.

  Thanks in advance!

  You can try the following (assuming that there is a dummy container with id mydiv = div),

  var img = new Image();

  IMG. OnLoad = function() {}

  SYM. $("mondiv") .attr ("width", this.width) .attr ("height", this.height) .append (this);

  };

  IMG. SRC = "http://www.icatcher.com/wp-content/uploads/2013/01/Adobe.png";

  Modify the code according to your need for the selection of the container element.

  DIA-

• Cannot install full App Manager - get the A12E1 error code

  After you download the Adobe Application Manager on my Mac Pro (Lion 10.7.3), I run Setup from the disk image. She starts and finally asked my admin password. I give it, and then get the following error screen:

  "We encountered the following problems:

  "Sorry, the program is not responding properly (error code: A12E1).

  What's not? I can't say what kind of program does not respond, and you are looking for the error code is not much light. Any help would be greatly appreciated.

  Thank you in advance.

  -Taz

  P.S. I have CS5 installed on my machine. I'm not likely to remove up to 6 works correctly.

  SOLVED!

  I have downloaded and run the Adobe Creative Suite Cleaner tool, cleared out everything that it displays and then tried again 2 installer. Seems to have worked!  It is downloading apps now.  If it fails, I'll post again. Otherwise, thank you very much!

• Get the width and height of the image

  Hi scripters

  I try to get the width and height of my image file. Here is my code

  myPicFile = File("c:\\ar.eps");

  h = myPicFile.height;

  w = myPicFile.width;

  Alert (h)

  Copy the following code generates error

  ---------------------------
  Script alert
  ---------------------------
  undefined
  ---------------------------
  Ok
  ---------------------------

  How can I get the height and the width of my image? is there another method?

  Thanks in advance

  concerning

  a you are the

  Dear Arul,

  Here, my code is in InDesign. I don't know that we get the size of the Image directly. ?

  Throught InDesign [you using the InDesign Script then] Script here I pasted the code below...

  = Image height / width =.

  myDoc var = app.activeDocument;

  myPicFile = file ("E:\\HariharaSudhan\\Blue hills.jpg");

  App.place (file (myPicFile);

  = Then u please select the Image file in InDesign and then you run the script = / /.

  mySel var = app.selection [0];

  var limit = mySel.geometricBounds;

  var height = related [2] - bound [0];
  var width = Bound [3] - bound [1];

  Alert ("Image Height:" + height + ""+"Image width:" + width);

  = End: getting the Image height / width =.

  Please let me know if you have any questions.

  Thank you & best regards

  Thierry T.R.Harihara

• ADF 11 g: unable to get the value managed bean

  Hello
  
  I am facing a strange problem in ADF 11 g.
  The backup of my main page bean is known as MainC.java
  From this file, I am setting some parameters in a file called PIn.java (PInis a simple bean with getter and setter methods)
  Code parameter set is running successfully to support bean (MainC.java).
  But when am retrieving data I'm not getting any value.
  
  I tried the same thing by using a java class instead of backing bean, but there, too, the problem is same value sets but not able to recover.
  
  My faces - config.xml is to be entered for the managed - bean PIn.java and I have tried with all eligible scopes for the bean.
  
  Please give pointers to resolve this problem.
  
  Thanks in advance

  SRY... my mistake :-)

  FacesContext context = FacesContext.getCurrentInstance();
  HttpSession session = (HttpSession)context.getExternalContext().getSession(true);
  sessionInstance = (PiV)session.getAttribute("PiV");
  if(sessionInstance == null) {
      sessionInstance = new PiV();
      session.setAttribute("PiV", sessionInstance);
  }
  

  The clause if the new statement was erroneous. It has been created a new body, whose only knews by your method :-) Now your variable overall "sessionInstance" has been completed.

  Majo

• FireFox is no longer crash recovery of open tabs. Management of tab has changed. How can I get the old behavior?

  All my old tabs are missing after a crash. I chose "view my tabs, windows and last time ', like the start option. Many unwanted changes in tab management happened recently. For example when I close a tab in a window of the two tab, I see a blank screen (see picture). Preview display seems to be broken (see attachment). How can I get the old behaviour back?

  After researching the issue, it seems that the problem was a problem of NoScript configuration. After restoring NoScript to the default values, the tab number disappeared.

  Thanks for your help.

  MELL-

  (~ J99) Also note

  mellpell said

  Looks like it's a known problem with Image Tweek:
  http://forums.mozillazine.org/viewtopic.php?p=14029673#p14029673
  https://github.com/CAFxX/ImageTweak/issues/37
  https://github.com/CAFxX/ImageTweak/issues/40

• Is the Add On portal/site down today? Try to get the XUL Remote Manager add on.

  Cannot get to the area to search/Download Manager Remote XUL. Any ideas what's happening? I get "the connection was reset", "Problem loading Page" etc...

  https://addons.Mozilla.org/en-us/Firefox/extensions/?sort=hotness

  Hello Elwayisgod
  It is for me. Have you tried the direct link to XUL Remote Manager?
  https://addons.Mozilla.org/en-us/Firefox/addon/remote-XUL-Manager/?src=search

  Have a good day/night

• I use the older style firefox and can not get the password manager to remember one of my passwords, how can I do this

  I use the old style Firefox browser and can not get the password manager to remember a password of my main site. How can I do this?

  Thanks for the advice, I went to another program... Last time... and saved my passwords with it. I find it easy to use and non-intrusive, and it has several features that are very convenient for me.

• Satellite Pro P300 - hot to get the WLAN driver in my device manager?

  I have a Toshiba Satellite Pro P300 with xp pro. My wlan driver atheros AR9281 does not work. I uninstalled it as suggested by Toshiba
  and downloaded a new. How can I get the download open and in Device Manager?

  Prior to do any create new folder on the desktop.
  Download driver driver and start TC00147200C.exe Toshiba will start extraction of archive
  Click on Options
  Click Browse, and then choose new folder on the desktop
  Click next
  Click Start
  When finished open the new folder and go to the folder XPDrv
  Start the installation with setup.exe and the installation should start

  Can you please confirm if it works?