Ghost 2003 hangs when trying to create an image of a laptop the m6300 precision hd
I am trying to create a ghost of a precision M6300 laptop hard drive image, but Ghost 2003 hangs just after the start. I tried the cd bootable Ghost 2003 on other systems and it works without problems.
The laptop, which hd I'm ghost, has win xp sp2 installed on it, as well as a few other business applications.
I'm trying to create this image of the boot with the disk Ghost 2003, rather than installing this application on windows xp, and then try to create the image of the hd by running this application in windows.
I heard tha acronis true image works well when creating hard disk images. What's the real disk bootable image? I like to create my images this way.
Thank you
J
Tags: Dell Drives
Similar Questions
-
I get a message saying "the service cannot accept control messages" when trying to install AVG. What could be the cause?
original title: error messageHello cd1968,
Here's what he says about this error in the MSDN library (http://msdn.microsoft.com/en-us/library/ms833805.aspx):
Explanation:
There is a lag between the requested control and service control status. The service may be in a State of waiting to start, shutdown - pending or stopped.
User action:
Wait a few minutes and try your operation again.
In other words, wait a bit and try again. You can also try to reboot (be sure to allow time Windows to load completely) and then try to install it.
Thank you
Darin -
I am trying to create dynamic landing pages that reflect the locations of my Google ads. How can I create a dynamic text on my landing page to specify the location in the title?
Thanks a lot for your answer. I've sorted it now.
Kind regards
Gill
-
VCB trying to create an Image backup
I am trying to create an Image using VCB and Backup Exec 12.5 backup. Everything is set up correctly so there is no problem. We would like to have the Image stay in his backup (mnt) and not on the band in the same work. Then the next morning, we have a job for each virtual machine that takes the disk image in the mnt directory, on tape. Disk to tape backup works fine. I can't explain how do us the work of disc to disc to work. What I want to accomplish is to create a job for the disc on the disc and then a job to drive to strip. The drive to the task of band we have figured out. I just need help on the work of disk to disk.
We have to our disk to disk backup, this command-line pre-Testimage "D:\Program VMware Consolidated Backup Framework\backupexec\pre-backup.bat" TestServer.EDU - FullVM
We have nothing in the command post. How to do the work to find the server, so it can save it? What should I put in the selection list?
Thank you
Take a look at my 'Proven practical Guide' VCB on VIOPS-> http://viops.vmware.com/home/docs/DOC-1392
It explains how things work a little better than the current VM backup Guides. While you are on the site of VI:OPS, check in the section "Availability" to see if there is a guide specific to your backup software.
Dave Convery
VMware vExpert 2009
http://www.dailyhypervisor.com
Prudent. We do not want to make of this.
Bill Watterson, "Calvin and Hobbes".
-
Cliq 2.1: Pandora Force closes when trying to create a new playlist
I used Pandora before and after the 2.1 update. Reading worked well.
I created several playlists pre-staged at level. I tried to create a new playlist today and got the following error message:
"Sorry!" The application of Pandora (process com.pandora.android) has stopped unexpectedly. Please try again. Force Close.
[Typing text to aid in searches of the forum]
I saved all my apps before the upgrade and restored with MyBackup. I'll try to download Pandora from the market and try again.
Yes, I remove it and then reinstall it as you say. I'll try mine and see if I can recreate it as well. I did a factory reset, so my app is new.
-
Problem when trying to create the graphic style...
I am trying to create a menu of the nave and to do this, create a unique graphic style that can reach my end goal. I can get what I want using a distinct form, but that defeats the purpose of the unique graphic style. I thought I could achieve the look by using an effect under
Effect>Pathfinder
But that is not the result I was expecting. Below you can see what the graphic style looks like currently, so I want to add to it (the brilliant) if all goes well in the same graphic style. Is this possible?
Try this:
-
Hello, everyone.
I am trying to create a .cfm document which delete and then re-create a specific collection of Solr, index and optimize it.
The removal works perfectly.
Unfortunately, creation it doesn't, at all. I get the following message:
Cannot create the collection publicsearch - an error occurred during the creation of the collection: java.io.IOException: the device is not ready.
This is a server of Windows 7 under Apache and CFServer 9.0.1 (the version before Verity was cut). I get no more detail than an error message. Any idea what could be the cause? I googled this and I see a lot of similar questions, but not quite what I have going on.
Thank you
^_^
So much worse... someone didn't bother to inform the proponent that the access to the collection AND the path to the directory that contains the collection for are different on this other server.
Fixed.
-
I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop
Hi MelissaBoltik,
· What is the exact error message?
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start and then click Run.
(b) type msconfig and click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Follow the steps in the article to reset the TCP/IP settings.
How to reset the Protocol Internet (TCP/IP)
-
ORA - 12054:while trying to create mview based on table in the other schema
Hi all
I suspect that this problem is all about privileges.show user user is "NAAMA" CREATE TABLE USERS ( user_id NUMBER, user_name VARCHAR2(15 CHAR), user_password VARCHAR2(50 CHAR), CONSTRAINT user_pk PRIMARY KEY (user_id)); TABLE created. --------------------------------------------------------------------- show user user is "TEST" create materialized view log on NAAMA.USERS WITH ROWID create materialized view users_mv build immediate refresh fast on commit with rowid as select user_name , user_password from naama.users; -------------------------------------------------------------------------------------------------------------- ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view
Please help
Thanks to advanced
NaamaNaamas wrote:
I understand and granted.Then I have a feeling get_name function is more complex than what you posted:
SQL> create user naama 2 identified by naama 3 default tablespace users 4 quota unlimited on users 5 / User created. SQL> grant create session, 2 create table, 3 create procedure, 4 create materialized view 5 to naama 6 / Grant succeeded. SQL> create user test 2 identified by test 3 default tablespace users 4 quota unlimited on users 5 / User created. SQL> grant create session, 2 create table, 3 create materialized view 4 to test 5 / Grant succeeded. SQL> connect naama@orcl/naama Connected. SQL> create table users( 2 user_id NUMBER, 3 user_name VARCHAR2(15 CHAR), 4 user_password VARCHAR2(50 CHAR), 5 CONSTRAINT user_pk PRIMARY KEY(user_id) 6 ) 7 / Table created. SQL> grant select, 2 on commit refresh 3 on users 4 to test 5 / Grant succeeded. SQL> create or replace 2 function get_name( 3 user_name_in IN varchar2 4 ) 5 return varchar2 6 is 7 v_name varchar2(10); 8 begin 9 select 'NAAMA' 10 into v_name 11 from naama.users 12 where rownum = 1; 13 return v_name; 14 end get_name; 15 / Function created. SQL> grant execute 2 on get_name 3 to test 4 / Grant succeeded. SQL> create materialized view log 2 on users 3 with rowid 4 / Materialized view log created. SQL> grant all 2 on mlog$_users 3 to test 4 / Grant succeeded. SQL> connect test@orcl/test Connected. SQL> create materialized view users_mv 2 build immediate 3 refresh fast 4 on commit 5 with rowid 6 as 7 select user_name, 8 user_password, 9 naama.get_name(user_name) first_name 10 from naama.users 11 / naama.get_name(user_name) first_name * ERROR at line 9: ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view SQL>
Next time you get MV create errors, you can login as the owner of the MV as question:
SQL> @?\rdbms\admin\utlxmv.sql -- run it once per user only, it creates table MV_CAPABILITIES_TABLE Table created.
Now comment ON offending COMMIT and the question:
SQL> begin 2 dbms_mview.explain_mview('create materialized view users_mv 3 build immediate 4 refresh fast 5 -- on commit 6 with rowid 7 as 8 select user_name, 9 user_password, 10 naama.get_name(user_name) first_name 11 from naama.users','xxx'); 12 end; 13 / PL/SQL procedure successfully completed. SQL> SELECT CAPABILITY_NAME, 2 POSSIBLE, 3 RELATED_TEXT 4 RELATED_NUM, 5 MSGNO, 6 MSGTXT 7 FROM MV_CAPABILITIES_TABLE 8 WHERE STATEMENT_ID = 'xxx' 9 ORDER BY SEQ 10 / CAPABILITY_NAME P RELATED_NUM MSGNO MSGTXT ------------------------------ - ------------------------------ ---------- -------------------------------------------------- PCT N REFRESH_COMPLETE Y REFRESH_FAST N REWRITE N PCT_TABLE N this PL/SQL function cannot be 2066 Oracle error: see RELATED_NUM and RELATED_TEXT for supported for query rewrite details PCT_TABLE N NAAMA.USERS 2068 relation is not a partitioned table REFRESH_FAST_AFTER_INSERT N 2083 mv references PL/SQL function that maintains state REFRESH_FAST_AFTER_ONETAB_DML N 2146 see the reason why REFRESH_FAST_AFTER_INSERT is di sabled REFRESH_FAST_AFTER_ANY_DML N 2161 see the reason why REFRESH_FAST_AFTER_ONETAB_DML i s disabled REFRESH_FAST_PCT N 2157 PCT is not possible on any of the detail tables in the materialized view REWRITE_FULL_TEXT_MATCH N this PL/SQL function cannot be 2066 Oracle error: see RELATED_NUM and RELATED_TEXT for supported for query rewrite details REWRITE_FULL_TEXT_MATCH N 2159 query rewrite is disabled on the materialized view REWRITE_PARTIAL_TEXT_MATCH N 2031 materialized view cannot support any type of query rewrite REWRITE_PARTIAL_TEXT_MATCH N 2159 query rewrite is disabled on the materialized view REWRITE_GENERAL N 2031 materialized view cannot support any type of query rewrite REWRITE_GENERAL N 2159 query rewrite is disabled on the materialized view REWRITE_PCT N 2158 general rewrite is not possible or PCT is not poss ible on any of the detail tables PCT_TABLE_REWRITE N this PL/SQL function cannot be 2066 Oracle error: see RELATED_NUM and RELATED_TEXT for supported for query rewrite details PCT_TABLE_REWRITE N NAAMA.USERS 2068 relation is not a partitioned table 19 rows selected. SQL>
As you can see REFRESH_FAST_AFTER_INSERT is not possible (POSSIBLE = N) and the reason is "mv reference function of PL/SQL that maintains state. Now the question is whether your function is deterministic (always returns a value even if the same parameters are passed). If it's really, use:
SQL> create user naama 2 identified by naama 3 default tablespace users 4 quota unlimited on users 5 / User created. SQL> grant create session, 2 create table, 3 create procedure, 4 create materialized view 5 to naama 6 / Grant succeeded. SQL> create user test 2 identified by test 3 default tablespace users 4 quota unlimited on users 5 / User created. SQL> grant create session, 2 create table, 3 create materialized view 4 to test 5 / Grant succeeded. SQL> connect naama@orcl/naama Connected. SQL> create table users( 2 user_id NUMBER, 3 user_name VARCHAR2(15 CHAR), 4 user_password VARCHAR2(50 CHAR), 5 CONSTRAINT user_pk PRIMARY KEY(user_id) 6 ) 7 / Table created. SQL> grant select, 2 on commit refresh 3 on users 4 to test 5 / Grant succeeded. SQL> create or replace 2 function get_name( 3 user_name_in IN varchar2 4 ) 5 return varchar2 6 deterministic 7 is 8 v_name varchar2(10); 9 begin 10 select 'NAAMA' 11 into v_name 12 from naama.users 13 where rownum = 1; 14 return v_name; 15 end get_name; 16 / Function created. SQL> grant execute 2 on get_name 3 to test 4 / Grant succeeded. SQL> create materialized view log 2 on users 3 with rowid 4 / Materialized view log created. SQL> grant all 2 on mlog$_users 3 to test 4 / Grant succeeded. SQL> connect test@orcl/test Connected. SQL> create materialized view users_mv 2 build immediate 3 refresh fast 4 on commit 5 with rowid 6 as 7 select user_name, 8 user_password, 9 naama.get_name(user_name) first_name 10 from naama.users 11 / Materialized view created. SQL>
However, keep in mind, Oracle approves completely you declaring function as deterministic. If, in fact, your function is not deterministic (and most likely is not) MV will produce erroneous results.
SY.
-
Create an image shape old laptop hardrive now in the case of the usb
Is it possible to create an image directly from a laptop HD I have now in a usb enclosure. I see the files and others as any external drive now. I've been five main tha with xp from my old laptop. I want the image and use it with my new laptop until I can cross all programs.
Thank you
Welcome to the VMware community forums. VMware converter is a free tool that you can use for this kind of it. With the Ministry of AGRICULTURE of http://sanbarrow.com to run cold clones.
-
Finder hanging when trying to share files to send
I use a MB Pro 13' bought a few weeks ago. The OS is the latest version available. I had a few problems with blank email that was resolved by uninstalling completely Security adds on called Trusteer / report.
Now a new and very irritating thing started by which I can't share a file to send by right-clicking on the file (in the finder) and selecting PART - EMAIL. Normally, a new e-mail window would jump upward with the file filling already. All that was needed was to add text and the recipient and send it.
The finder window becomes almost insensitive and I need to force quit and then relaunch it. The only life I can get out of the finder window in this State is that I can scroll vertically in the window, but only a limited number of files is visible. The slider on the side right up and down but does not actually move the files.
The only way I can send a file to someone by e-mail is to create an email and join from there. This method works very well.
I also noticed that if I try share a webpage to Facebook, he will not do that. Safari becomes unresponsive and I have to restart. Restart the machine makes no difference.
I did a lot of research online, but have not been able to find a solution. I tried deleting file plist without result.
Please launch the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
PES 2012 hangs when I hit create avatar section!
When I start PES 2012 TI displays an error message that my system does not reach the requirement VRAM:128 MB. When I check in DXDIAG I see about total memory: 1696 MB.now when I ignore the error message that I receive the game starts fine.but when I reached the sectioon of avatar automatically create the game crashes and it says that windows is looking for solution... How can I play the game?
Hello
Did you change your computer?
I suggest you to follow the methods and check.
Method 1:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
I suggest you to update the drivers for graphics cards and check.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyThe problems of the game performance
http://Windows.Microsoft.com/en-us/Windows-Vista/fixing-game-performance-problems
I would also ask that you contact the manufacture of the game.
-
I could view and manipulate all my files video 3D before the update to IE10, so I did a restore and all is well again.
The problem IE10 was installed host.dll/substitution/thumbnail cache com would consume memory until it saturated my whole system and crashing.
Updated platform for Windows 7 x 64-Edition (KB2670838)
http://support.Microsoft.com/kb/2670838?WA=wsignin1.0%2cwsignin1.0
This update of the platform also allows the emergence of the problem.
I could view and manipulate all my files video 3D before the update to IE10, so I did a restore and all is well again.
The problem IE10 was installed host.dll/substitution/thumbnail cache com would consume memory until it saturated my whole system and crashing.
Updated platform for Windows 7 x 64-Edition (KB2670838)
http://support.Microsoft.com/kb/2670838?WA=wsignin1.0%2cwsignin1.0
This update of the platform also allows the emergence of the problem.
Why does dllhost.exe Com surrogate consumes memory until the crash.
This happens when I highlight or view a folder containing video files, even if I close the file or select another folder, that maintains the memory consuming.
It seems to happen more often with the 3D video files, but it has done the same with the 2D files.
It therefore seems to be a problem with the windows thumb nails system on these files.
Besides trying to delete or move the file or folder, while the Com Surrogate consumes memory Delete cannot complete the task.
What I did is to find by selecting delete file in question, then go to Task Manager stopping Com Surrogate, then deletes the file.
OK guys and girls, here is the scoop or what I discovered.
Went to paid Support MS started a ticket gave them the info of the problem.
I backed up before you have to pay, but it will still leave a ticket on the system req.
Them I did a searck masive on this problem and ran into this and I beleve it's true. It's the way they handled a similar problem in Vista.
So here it is.
"MS are aware of the problems with certain chipset / combinations ofdriver with the updated KB2670838.
They also have problems with the installation of IE10They work on these two issues and will be updated as and when they are convinced that they have solved the problems.
In the meantime, the recommendation is that if the update isn't the first phase of installation, make sure that it is uninstalled and then hide it - Windows Update will display it when it is updated. »To uninstall IE10 and KB2670838 update, should be fixed hide automatic update when your pop back up to be updated the problem.
Evidence that MS knows that IE10 has problems on some hardware platforms is here.
http://TechNet.Microsoft.com/en-us/IE/jj898509.aspx
Hope this helps Every One.
-
Flash CS6 started hanging when opening or creating projects - help!
Hello
I have not used the Flash CS6 (on Win 7 x 64 Pro) for a few months, and now, when you open or create projects, Flash crashes at about 10% CPU and will not continue loading.
I created a dump file of the Mini using Process Explorer, which can be downloaded here (9 MB) Dropbox - Flash2.dmp
Please can anyone help diagnose it, so I can get it working again? I have plans on hold (don't we all).
Thanks for your help
Richard
Thank you. None of these circumstances applied to me, but I found the problem by using a few process and Thread analysis tools. There was a problem with my Wacom drivers and for some reason, and to delete and reinstall these has solved the problem.
-
Problem of driver ODBC Oracle when trying to create a data source / Win XP
Hi guys,.
hope I'm here with my question.
When I try to create or data source in Windows (regardless if user or system data source), and then click 'Test connection', I get this error:
* [SQLAllocHandle from Microsoft] [ODBC Driver Manager] drive on SQL_Handle_ENV failed *.
TNS name is correct, tnsname.ora is correct, the user is correct.
I have the driver for an OraClient10g is installed on my machine.
I'll reinstall this package? Other things to do to fix this?
Many thanks for any help,
Christian
Published by: ChristianP2 on October 6, 2008 18:13You can read this article
http://www.orafaq.com/Forum/m/100430/0/?srch=driver%27s+SQLAllocHandle+on+SQL_Handle_ENV+failed#msg_100430someone said that it fixed the problem after the correct path environment variables
someon claimed that it is permission problem when installing.
Maybe you are looking for
-
Cancellation of tide via itunes
How to cancel music tide? I went through all the instructions I found, but when I get to the part of subscriptions to manage in itunes, the tide is not there. However, I signed up for the free trial month and I know that his relatives to become now e
-
HP ENVY 14 2020NR: need a recommendation for a replacement hard drive
Greetings, I have an a HP ENVY 14 2020NR with a hard drive died. Blue several screens before the new year, did a complete system restore, which seemed to have fixed things. Unfortunately, after 10 days the blue screens are back. The unit is several y
-
Roles of server separate from the virtual machine on a server?
Hello I'm currently learning the server admin so please forgive my ignorance. I bought a server and got Win Server R2 2012. Im trying to focus by trial and error and so want to install multiple roles - that I know is not recommended because some may
-
Microsoft virtual WiFI miniport adapter has adriver problem
does anyone know how to fix Microsoft virtual WiFI miniport adapter has adriver problem
-
Last updated blackBerry Z30 will not allow deletion of e-mail
How to delete emails from the server? With the last update, the option delete the server seems to have been deleted and deletion comes only from the hub. Hope I'm just something missing.