go url - no value in filter question

Similar Questions

• Question of Clickjacking - addition of several models of url in a single filter mapping

  It's on Clickjacking issue. To avoid this problem of clickjacking I've added the following in the config file (web.xml).

  
  < filter mapping >
  < filter-name > CFClickJackFilterDeny < / filter-name >
  < url-pattern >https://abcd.rw.xyz.com/mer/nao/app_v4/* < / url-pattern >
  < / filter-mapping >

  
  

  I have a doubt here. I need prevent this problem of clickjacking for another application as well (say, https://abcd.rw.xyz.com/mer/nao/app_v5/*). But I did it by adding a filter plus-cartographie, apart from the one mentioned above, in the config file. I can achieve this by adding several models in the same filter mapping URL? If possible, which is the best method? I want to say the creation of a new filter-mapping or add several models of url in the same filter mapping?

  
  

  Any ideas or thoughts appreciated?

  In this case, you can use a set of with several elements of . This design is actually better than the one in which you define a url for each item in model. In the design of the latter, the underlying Java code will create additional objects to represent the additional filter mappings, unnecessarily.

• Is it possible to use advanced actions to set the value of the question?

  Hi - I am trying to develop a course of Captivate 4 and wish I could on slide enter advanced use of actions to check the value of a user variable, and if the variable is equal to x then set the value of the question (correct) 1. Is there a system variable, that I can use to define?

  This course is to download a package to an LMS (Moodle) SCORM.

  Ideas/suggestions would be greatly appreciated.

  Unfortunately, Captivate is not currently a way to manipulate SCORM score via advanced Actions and the user or System Variables.

  So that you could have OnSlideEnter check and set the value of a variable, you don't have a way to use this information to force sending a question slide.

• Get the value of the question page before submitting.

  Hello all, I use the Application Express 4.2.5.00.08. I have a question on getting a value for a page element before the page is sent. I have a dynamic action:

  Action: Moving the mouse (on a region/State)

  Real Action: $('a[href*="39"]').each (function (index) {}
  lnk = $(this) .attr ('href');
  $(this) .parent)
  . Parent ('tr')
  .Attr ("href data ', lnk")
  {.mouseover (function ()}
  $(this) .css ("cursor", "pointer");
  Lrowrequired var = $(this) .closest ("tr"),.
  BLOCK = lRow.find("td[headers=BLOCK]").text ();
  $x('P39_BLOCK').value = BLOCK;
  })
  {.mouseleave (function ()}
  $(this) .css ('cursor', 'default');
  })
  });

  I am successfully able to get the value of the line while I'm hovering above the report (and P39_BLOCK is refreshing). But, in this case, the value is not set whenever it changes. My question is, if I need to use this value (say, put an another page element when P39_BLOCK is changed) without submitting the page, how is that possible?

  Kind regards
  MFadel.

  Hi Mohamed,

  That's what bothers! In my first dynamic action, I have real action 'Execute JavaScript Code', which doesn't have a property "Page items to show.". And I need this code to retrieve values from the row of the report.

  On the right, you will have the option 'page elements to present' the dynamic JavaScript actions. Only the PL/SQL. And you do not need to handle things strictly the use of javascript. JavaScript is usually used to manipulate items on the page itself, not the things on the server/session). If you need to present before your PL/SQL block, you can either use AJAX call, or you can create a dynamic action of PL/SQL that runs before your JavaScript. Put this field in the 'submit' page elements and the block of code, just put null;

  Here's a sample in javascript, ajax call. It pushes three elements of the page in the session or in the scope where APEX can access their values. You can return values through AJAX if necessary also:

  $.ajax ({type: 'POST',})

  URL: "wwv_flow.show",

  data: {}

  p_flow_id: $('#pFlowId').val (),.

  p_flow_step_id: page,.

  p_instance: $('#pInstance').val (),.

  "x 01': P39_PAGE_ITEM_1, '.

  "x 02': P39_PAGE_ITEM_2, '.

  "x 03': P39_PAGE_ITEM_3, '.

  p_request: 'APPLICATION_PROCESS = YOUR_PROCESS_NAME'

  },

  success: function (data) {}

  Console.log (Data);

  }

  });

  Then you would have a PL/SQL process called YOUR_PROCESS_NAME that can refer to variables such as

  my_var_1 VARCHAR2 (100 CHAR): = APEX_APPLICATION. G_X01; -Javascript password

  my_var_2 VARCHAR2 (100 CHAR): = APEX_APPLICATION. G_X02; -Javascript password

  my_var_3 VARCHAR2 (4000 TANK): = APEX_APPLICATION. G_X03; -Javascript password

  Can I use in my "PL/SQL procedure? Because in the end, I'm trying to use this value in a PL/SQL procedure:

  To answer your last question, Yes, you can use the P39_BLOCK in your PL/SQL, how you demonstrated above, but you must submit in the 'page' referred to submit box, otherwise it uses the last value that has been submitted.

  What I'm not clear, is do you need really value before executing the PL/SQL or you just want your PL/SQL? If you just try to pass it in PL/SQL and then just use the dynamic action of PL/SQL and pass it by using the "elements of the page to present. '' Remember, if you need a new value to publish on the page, you will need to put these fields in the box "items to display the page.

  If you only need the value of front page because you will use in javascript, somewhere, then reference it with jQuery or js and then use AJAX to continue your treatment.

  A third way, you could do, is to create a dynamic action of PL/SQL that runs before the javascript code that is null; in the body of PL/SQL, but put the P39_BLOCK in the "elements of page to submit" box. Who will just send the page element, and then take action dynamic javascript. But, I don't know why you would do that since you can't have the value submitted for javascript to use.

  Hope that all makes sense.

  Jen

• High-pass filter question

  Hi all

  I have a question about the high pass filtering in LabVIEW simply based on observation, have never been taught directly on the filters.

  A signal of high pass filtering, with a Butterworth IIR filter (2nd order) for example, around the time Fortran, = 0 there is a transition from a high-intensity "false" at a rate expected, as the officer although this is achieved thanks to a program as I have nothing else to hand at the moment.  In order to minimize the importance, for the rest of the filtered signal, you can increase the sampling time, change the filter settings or even add time of additional levy in order to truncate it.

  Is there an established method to get around this?  The reason why I ask is because I'm trying to distinguish accurately Laminar and turbulent parts of a signal of speed but on time = 0, in a completely laminar signal, our method returns false positives for the presence of turbulent structures.  I assume that this will always be the case, but it is better to ask first and concluded later!

  Thank you.

  All filters have a transient initial.  You must wait until it has settled on or try to compensate for the spike in some way.  Transitional measure also depends on the input (including any noise) signal, it is generally not possible to compensate exactly.

  Lynn

• change the value % 3F filter events

  Hello

  I would like raise a filter event 'Change of value?' for the OK button. You will find my attached VI. In fact, I want to cancel the value change event if one of the LEDs is on. How can I implement this?

  Thank you for your support

  For the buttons, use the MouseDown? the filter event.

• In bulk Eloqua API complex filter Question

  Hello

  I have a bit of a problem with the API of BULK ELOQUA.

  This question is more precisely to do with filters.
  I have the below to filter a combination of updating & Date created fields.

  "filter": "(('{{Contact.Field (C_DateCreated)}}' > = ' 2015-07-09' AND '{{Contact.Field (C_DateCreated)}}' < ' 2015-07-10') OR ("{{Contact.Field (C_DateModified)}}"> =" 2015-07-09' AND '{{Contact.Field (C_DateModified)}}' < ' 2015-07-10'"))". "

  This seems to return the correct results, but a lot of incorrect results-

  Here's an example output with the deleted email.

  {

  'EmailAddress ':,.

  'DateCreated': ' 2015-07-13 03:21:07 ",".

  'DateModified': '2015-07-15 04:30:18.

  },

  As you can see that it does not meet the criteria I'm using. (July 9, 2015).

  When I use the filter separately it seems to work perfectly. FOR EXAMPLE

  "filter": "('{{Contact.Field (C_DateModified)}}' > = ' 2015-07-09' AND '{{Contact.Field (C_DateModified)}}' < ' 2015-07-10')".

  
  The above returns only results with a DateModifed of July 9, 2015.

  Is my built wrong filter?

  Any help is greatly appreciated.

  Thank you

  Damien.

  Hi Damien,.

  Currently we support only, because of our research infrastructure, filters in the form:

  (A or B) and (C or D or E) and...

  We do not support (A and B) or (C and D) that is expected to extend this functionality to export activity as it should in this case.

  -Sorin

• SVG filter question Gaussian blur

  

  This deviation from filter is set to 10, and given that the blur radius is too large, it just cut. I guess you have to increase the forms include, but are not actually increase the size of the form. Don't know how to do it well. How can I fix?

  Thanks for the reasoning. I was curious to know why.

  The SVG feGaussianBlur filter is infamous for having had this problem when the canvas is not set large enough. The downside is that Illustrator does not exactly work plans in the same way as the SVG canvas. Thus, in order to stop the edges are cut off, you will need to add code to the SVG filter. I read that doing so may have a performance impact, but it will allow you to bypass the edge clipping.

  I used the filter of default AI_GaussianBlur_7 on the circle on the left. The right is the same filter, but with an additional code applied to set the area of the circle design.

  

  The code after the code in the first line of the filter. "What I found online to help someone else who has problems, it is: x ="50% "y =" 50% "width ="200% "height ="200% ".

  The full code I used is:

  You can play with the values to find something that works for you, but at least this will put you in the right direction.

• Zig Zag filter questions

  I use Illustrator CS4 on a Macbook Pro with Lion mountain... the question.

  The first time I used the zig zag filter today I had exactly the effect I wanted:

  

  So when published to consider 15 peaks at 14, this is what happened:

  

  I don't change anything either, but the number of crests by segement.

  Then I tried to open a new document (thus also restart Illustrator) and creating a completely new line and applying the zig zag filter and got the same strange result yet.  I compared my appearance Panel settings and everything is the same except for the appearance of the tile.  I know it must be something simple that I forget but for the life of me I can't figure out what it is!

  Your path has a fill. You went to an odd number of points at the beginning and end at the top of the zig zag, an evwn of points number to start at the top and bottom end. Illustrator is just auto fill a path open.

• Guest column SQL limit values results filter

  I have a prompt Filter column showing values based on sql: SELECT task. "" Saw_0 task name ' OF THE 'Project - Cost' ORDER BY saw_0. This sql works and shows all tasks. However, I would like to have this prompt limits based on the prompt. As the option of limited values.
  
  Example: The user is prompted to select a project. The user has an lov and selects a project (s). Then, I would have the second guest with sql (SELECT task.) ("' Saw_0 name of the task" OF THE 'Project - Cost' ORDER BY saw_0) limit values selected on the first prompt. How do I would change sql to do this?
  
  Thank you

  If built correctly, you can check the checkbox 'Coercion' to the line of dashboard (you can not use a guest column for that!) and the task list would be forced by the selection of the prompt project.

  Otherwise, you must the guests of dashboard (with 2 'Go' buttons).

  The first prompt will have your projects you need to save a variable presentation, say pv_Project

  In the second line, you click the drop-down "Show" menu and change to "SQL results. Then, you need to add at the end of the SQL statement, which suite:

  WHERE the table. "Project = ' @{pv_Project}"

• Patch Wizard - Filter question Support

  I installed the filter Support on my 11.5.10 CU2 system and he ran as a test to make sure that my system would fill extended support.
  The overall state of employment recommended watch = 0 and Code = 0 new level, so at the first appearance, it seems good.
  However if I check claims and sub to use my work as 'Support' I see a couple of queries which ended with the caveat.
  The first task "submit recommended patches (wrapper) shows that the newspaper to ask:"
  * WARNING: Some information not properly downloaded patch *.
  Patches that have problems during the download:
  1 2147366
  2 2372715
  If I look a little more closely, I see there are a few lines of INFORMATION that say:
  INFO: The patch does not f2147366.ldt because it is an old patch. Patch Advisor cannot be used for this patch.
  INFO: The patch does not f2372715.ldt because it is an old patch. Patch Advisor cannot be used for this patch.
  
  After that end up like Normal completed jobs"but the last PWSTATUSTRACKER job ends with 'warning' and demand newspapers indicates:
  +---------------------------------------------------------------------------+
  Beginning of the FND_FILE log messages
  +---------------------------------------------------------------------------+
  Tracker status: this application set is the model application to track the status of individual requests and assign the legal status to all of the application
  The current request ID: 783826
  Current request the id value: 783544
  783783 normal
  783779 normal
  783776 normal
  783774 normal
  783771 normal
  WARNING 783546
  783825 paused
  Overall demand set the status is an error
  +---------------------------------------------------------------------------+
  End of the FND_FILE log messages
  +---------------------------------------------------------------------------+
  
  So is the global "warning state" due to the error where some patches could not be transferred, but otherwise looks good.
  
  "My next step would be to present a work of"Patches"recommended or the ' recommended and new levels of Code?

  Hello

  So is the global "warning state" due to the error where some patches could not be transferred, but otherwise looks good.

  You will need to download these patches and apply it manually - please see (OAM PADOWNLOAD AND PAANALYSIS cannot make the DIFFERENCE BETWEEN 11.0 AND 11i STAMPS [352212.1 ID]) for more details.

  "My next step would be to present a work of"Patches"recommended or the ' recommended and new levels of Code?

  Please see (Patch utility Assistant [976188.1 ID]).

  Thank you
  Hussein

• By the way a prompt concatenated value to filter a report

  Hello, I am relatively new to OBIEE and still learn the basics.
  
  I have a multiple selection of dashboard prompt where users want to see 2 columns concatenated:
  
  Dept Num |' -' || Name of Dept
  
  I'm having a hard time to find ways filter my report based on this concatenated value. I really need to filter on Num Dept, but on the concatenated value of filtering would be nice too.
  
  In other words, if a person chooses * 555 - billing * then I'd be ok just by the way * 555 * to the report. However, if it is easier to State to accept the full string, then I'd be ok with that too. I just need to be able to filter is the report on Dept Num |' -' || Name Dept or Dept Num based on concatenated value that the user would choose from the prompt.
  
  Any help/advice would be greatly appreciated.

  You can either:

  Create the column in your query responses and use the filter icon
  or
  create the filter first simply based on the column dept, "is invited", and then in the filter properties, you can choose to change the formula for the column.

  Both have the same effect.

  If you have already saved as a shared filter, you can change the formula column in there also in the same way as above, just find your shared filter find the dept column and choose the formula column change.

  Another thing, when you want to accept as input when prompted, you can value "is invited" or it has a fixed value, the guest of the dashboard will replace the fixed value as long as the formula of the pass are the same.

• How to pass the external APEX URL parameter values

  Hi all
  
  Hope you can help me with the following:
  
  During my first APEX application, I created a button that should have a parameter value of the current page to an external URL
  
  I created a button.
  
  The URL redirection target option is set to URL
  
  [I put the URL target for the http://[URLNAME button]? [constant parameters] & p_variable =: P13_VALUE1
  
  The APEX variable does not replace what I understand. Can someone tell me how it CAN be replaced?
  
  Thank you very much
  
  Marco

  Hi Marko,

  You must use & P13_VALUE1. of the element to get by following the link.

  Kind regards
  Andrea

• Upgrade Vista to Windows 7 keyboard filter question

  I really need help with this...

  I have upgraded vista to the full retail version of Windows 7.

  Compatibility check says updating keyboard filter. I could not find much info about it and assumed it would not be too affect many except extra work I probly never use.

  Unfortunately, my keyboard doesn't work well at all.

  IM using HP-G30-260US laptop computer.

  I now disconnected the keyboard Ribbon and plugged a usb keyboard, a pain to use, but at least its working. I would really like to know a fix for this problem to get my job real keyboard and installation of windows 7 is already running on this computer, the upgrade, not a clean place. I tried to install a different Quick Launch buttons driver and uninstalled completely after windows 7 but without success.

  Please help me hehe

  Thanks a capture

  Matt

  Uninstall HP QLB and install it:

  Buttons lunch fast HP here

• Filter question of hosted service - seems to not work

  I have a configured filter and most of the time it seems to work correctly.  The goal was to create a filter TLD of sorts, but some still get through.  Read on.

  In our environment, we care only about 6 TLDS (COM, NET, ORG, GOV, US and CA).  Due to this luxury hotel, it is ideal for simply deleting all other areas.  I created a filter where the "from" field "does not contain" these 6 words (in a dictionary) and it works... for the most part.  Some still go and sit in our junk mail box.  Of course, an email like "[email protected]" that makes grace because the letters 'com' is in the word 'complete' and who is eligible to pass the filter.  However, an email with a 'to' of '[email protected]' is sitting in our junk mail box.  Why it has not been deleted?  (See below... I removed the field)

  From:	"AIGDirect.
  TO:
  Object:	$13,91 buy term life insurance of $250,000
  Date:	Monday, may 18, 2015 18:12:20-0700
  Message-ID:

  Even the header information (RAW MODE) containing all the references to my dictionary.

  Unfortunately not. It is based on the search criteria.

  In this case "does not contain".

  It does not use the "." using anything else that ends with right now.

  But we are also on a new version 8.1 on hosted, so there must be a few things to fix.

  One thing I ask is the option for "ends not by.