GPS SWR30 and sleep

Similar Questions

• iPhone GPS 7 and abandonment of the cell

  So has my new phone for about 4 hours now and got the GPS and cell phone service at the same time deposit at least 8 times - usually only for about 2 minutes, but as I travel and using navigation, it was very difficult. Someone else had this problem?

  iPhone 7 are not yet a product in this forum...

  Thank you for joining the Apple support communities, Jaalwine!

  Congratulations on your new iPhone 7 too! I know when I have the GPS enabled, I need to work because I'm lousy with directions. I want to see my next tour before it rises. Because your GPS service and cell phone are linked together a little, I'll be happy to help you both.

  On privacy and location in iOS Services 8 and later -knowledge is power. Understanding of the functioning of location Services to get you where you are going or find things you need can be useful.

  If you can not connect to a cellular or cellular data network - since your the carrier signal is down, here are the steps to remedy.

  Good hike!

• The next MacOs health activity. (GPS Track and Periforments.

  The next MacOs health activity. (GPS Track and Periforments!

  If your message is a request for features in a product new macOS, it will be lost here as the genius of Apple does not participate in this community of users to solution. Not for OS X or Mac OS.

  If you have the beta version of macOS Sierra, you can provide feedback via the appropriate support channel. As the end of June, it is very likely that new feature for Sierra macOS requests are frozen, and the rest of the time through release of the App Store will be refinements of the existing code of minimum standards of ship.

• How to force the Photos up-to-date original jpeg file after you have added the GPS data and rotation

  Hello

  Pictures has the ability to add GPS data to an image file, but stores the GPS data in a catalog instead of the actual image file.  The same seems to apply to the rotation of the image.  Is there a way to force the Photos up-to-date the actual image file?

  The only solution I have found so far is to export images updated, remove them from the library of Photos and re - import.  This process, however, replaces the original creation date with the date of the export in the file.  (i.e. a photo taken in 2007 with a creation date of 2007 will now have the date it has been exported photos as a creation date.)

  The reason why I want to update the original file, it is that I use Google Photos automatically create albums using the content of the image, the GPS data and dates.  The backup utility Google downloads the file Master Original therefore excludes files and changes to images in the photos.

  I use the photo Version 1.5 (370.42.0)

  Thank you.

  The same seems to apply to the rotation of the image.  Is there a way to force the Photos up-to-date the actual image file?

  No, Photos will never alter the original image file.

  You can export the photo with the GPS and reimport with file > export and activate "include location information:

  

  Or use a tool to add location data before importing photos to Photos. I use Jetphoto Studio.

• NB550D - music and sleep accessory

  I will receive my NB550D next week, but I'm sure that the cable that allows the function music and sleep comes not packed.

  So should what kind of cable I look to buy?

  Greetings,
  Catarina S.

  Hello

  I put t what such cable would be a part of the package.
  The laptop would come with a power adapter.
  If in addition you must buy a compatible cable

• How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do?

  How can I restart my iPhone 5 c? I tried to connect to iTunes and that has not worked. Then I tried now the home and sleep/wake buttons simultaneously, but that no longer works. My charger works. What should I do now?

  Looks like a hardware problem (with your home button).  You should probably make an appointment with the genius of Apple on an Apple store near you.  This link can help:

  https://www.Apple.com/support/contact/ >

• HP n278tx do not hibernate and sleep in point 8.1 of Windows + impossible to install the chipset Drivers sp63967 & sp63966

  I have HP n278tx laptop and I recently installed Windows OS 8.1 and now I can not hibernate and sleep my knees.

  When I do that it get stuck.

  And also I can't install drivers chipset provided by HP to Win 8.1 Pro.

  I can not install these 2 drivers. Please help me.

  

  You are the very welcome.

  The reason why you can not put the laptop to sleep or into hibernation is because you need to install the NVidia graphics driver too what this hardware ID.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-133679-1&cc=us&DLC=en&LC=en&OS=4158&product=6967644&sw_lang=

  I don't understand why it not install this driver.

  The only other suggestion I can offer is to see if Windows Update installs the driver.

  Go through the manual steps that above, but this time be connected to the internet, then select the method of automatic update .

  See if windows update detects and installs the Intel Management Engine driver.

• GPS sync and external clock

  Hello everyone,

  my task is to synchronize my PXI system to the time base GPS and after using an atomic clock (10 MHz output signal) as well as external CLK in. after the first synchronization of the GPS. the GPS signal is no longer available, however very important as the base unit of time not significantly drift. For the material there is a PXI chassis with 6682H module for GPS reception and 5622/5603-5653 combination for the acquisition of measurement data available.

  I thought since I'm fairly new to Labview and PXI system, it would be nice if someone could give me some feedback on the solution and help solve the problems that I have.

  The idea would be to have atomic clock connected to all CLK INs the PXI at all times. For GPS sync I would use the "Set time reference niSync' function first set the clock of Council to the GPS. After the free trial (the device is not moved during the GPS synchronization) I would like to stop using the GPS.

  After the external atomic clock. should also be used to calculate the frequency increases and the determination of the relative time. I suppose that if I back the reference to free running time, it would still use the last increments of calculated frequency derived from GPS?

  Is there another solution to address both reference to PPS? Problem is, I only have a 10 MHz signal available.

  Thanks a lot for any help

  Hello.

  When the PXI-6682 tries to synchronize to a source (GPS, 1588, PPS), she is a great fit for its time base, to eliminate the first offset from the source and then made small developed to the clock, the timekeeper, to keep in sync with the source of the conduct.

  In this case, you have an atomic source at 10 MHz that you trust, so you do not want/need small adjustments, you want to only make the initial adjustment of wholesale and then just run based on the clock of 10 MHz supplied.

  Is there a way to make the PXI-6682 to do this.  You will need to configure it to assume that PXI_CLK10 is good and no adjustment is necessary. There is no call to the Sync API OR standard to do this, you need to get the VI that configures the jury to do this in the .llb used to clock discipline (in which the PXI-6682 also doesn't make small adjustments based on his time, but guess PXI_Clk10 is 'good').

  You can get the .llb from here: http://joule.ni.com/nidu/cds/view/p/id/2318/lang/en

  The VI you need is mdevClkDisc.llb\_clkDisc_niSync_advancedAttribute_set_bool.vi

  Together the "attribute of niSync" entry "Clk10 disciplining activated ' and the 'value' of coming true, as shown in the picture as an attachment.  The time reference offset must be<10ns and="" constant. ="" give="" that="" a="" try="" and="" let="" us="" know="" how="" it="">

  Note that once you do this, the PXI-6682 will be able to make adjustments to his timekeeper. It will work exclusively on the 10 supplied MHz reference clock. Therefore, if the clock of 10 MHz in fact derive from GPS, there is nothing that the 6682 can do about it.  If you fall into this situation, one thing you can do is set at a time reference to free running, set the time to something that is off by saying that 60 seconds, and then set the time reference to the GPS.  That should put it back on the rails.

  I hope this helps.

  Alejandro

• Problems with Windows 10 screen standby and sleep mode

  After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode.  When the computer turns off, he doesn't have the bright screen.

  After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:

  • > Power LED remains lit after stopping
  • > Computer enters standby or hibernation.

  HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.

  See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?

• HP Pavilion x 360: stop and sleep problems

  I've updated for Windows 10 and now my computer won't shut down or sleep. In order to shut down the computer completely I have to restart my computer, and then stop. If I used my computer for more than an hour, it will not be stopped or he wake up from sleep mode. I have updated my drivers and graphics cards, as well as disabled the quick start. I checked the BIOS and there is no update available. I also ran the updates of Windows. At this point, I don't know what else to try.

  Hi @bn485,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook of 360 and problems with the Shut Down mode and sleep.  I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you.

  Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Then save changes. Restart your computer and see if the options have changed.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  You can also try:

  In Device Manager, click the arrow next to display adapters to expand this category
  Right-click on the graph, and then select Update driver software if more than 1 graphic adapter do 1 at a time.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver
  Once the installation is complete, restart your laptop.

  I hope that helps.

  Thank you.

• SWR30 and Extension SmartControl

  Hello, all. I can't add SmartControl Extension application SmartBand Talk. The SmartControl Extention application crashes every time when I try to add.

  I have SWR30 and NExus 4 with Android 5.0

  Anyone have the same problem?

  Thank you.

  Today I received the update of Smart Control extension and it solved the problem

• Difference between "Auto off" and "Sleep" on LaserJet P1102W

  The user guide for the LaserJet P1102W indicates that the default Auto setting in the properties is 5 minutes.  "Automatic stop" drop-down list does not contain a setting of 5 minutes - rather it contains "never, 30 min and 1,2,4,8, & 24 hours."  However, the drop-down list 'Sleep' contain 5 min and other selections up to 1 hour.  What is the difference between auto-off"and"Sleep ".

  After the installation of this new printer, the default settings have been = 5 Minutes ' Sleep' and 'Auto off' = never

  I have several computers around the House than any print to the same printer.  I want to always available for printing without issue in the basement to activate it, but yet they want more economic mode.

  What is the difference between 'Sleep' and 'Auto off' and how should I put them in my terms of service desired?

  Thank you.

  Hello

  I understand that you are looking for some explanations between the Sleep and automatic shutdown of the Laserjet P1102W printer. I would be happy to offer you answers!

  For your desired operating conditions, I think that you already put as you would like. Standby essentially puts the printer in a State of very low power consumption, but the printer can be awakened from this State by sending a print job (meaning you don't have to go to the printer to remove it from that State). The auto-off function off the printer completely after a period of time. The only way to take the printer out of State would be to go to the printer and press the power button.

  To have several computers connected to this one printer I would recommend leaving the auto-off Never and Eve to what you think is the best. As I said, the printer will wake up fashion 'sleep' and accomplish what you ask without physically going to the printer.

  Hope this helps, have a nice day!

• Paused long and sleep don't work on Windows 7 Home Premium

  A few weeks ago the Hibernate and sleep functions stopped working on my SONY VAIO laptop.  By that I mean, I can click on functions and it seems to work fine, BUT a minute later he wakes up.  I disabled hibernates and then helped him, but this does not solve the problem.  Then one week there is exactly the same thing started to happen on my Lenovo desktop all-in-one computer.

  I never had this problem on any of my computer before, is more strange would happen on two computers in a few weeks apart.  It makes me think that a recent Windows Update may have caused the problem.

  Yet once, put in hibernation until sleep only works for a minute, and then he wakes up again.  I am convinced that it is NOT caused by a former pilot or a device that wakes the computer since we are talking about two distinct and unique computers that do not share anything other than a printer.

  Thoughts or ideas to solve this problem is greatly appreciated. Thank you.

  Hello Brad,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. have you made changes to your computer hardware?
  2. What is the model number of your laptop?

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877

  Method 3:

  You can also create a new power plan and check.
  See this link:
  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme
   
  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Download GPS Latitude and Longitude of the Contact

  I'm stuck with this problem.

  I want to get the GPS latitude and longitude of the contact object.

  Can any post related code. ??

  Kind regards

  V: Vinay

  Thanks for the suggestion

  My code works fine now.

  I me call Blackberry card for the most part after the return of the thread.

  Now, I m call from BB after invoking card application

  landmarkArray = Locator.geocode (_search, null);

  in the thread itself. It works very well.

  Thank you all,.

  V: Vinay

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support