Grant select on all the table schema in the role
Hi, it is possible to grant is selected on all the table on a diagram to a role?Yes.
SELECT 'GRANT ALL ON' ||TABLE_NAME || ' to ROLE_NAME;' from dba_tables where owner='SCHEMA';
Tags: Database
Similar Questions
-
Access grant select on all tables in a diagram to another diagram
Hi all
I can grant select access on the tables of a schema (SAY USER1) to another (SAY USER2) by giving him a role and in turn grant this role to another scheme as below:
FOR x IN (SELECT * from user_tables)
LOOP
RUN IMMEDIATELY "SELECT WE GRANT | x.table_name | "To < < role1 > > ';
END LOOP;
Role1 Grant User2;
but my question is that suppose I create another table say "TEMP_TAB" in the scheme of USER1 after the execution of the block above user2 will be able to access the table TEMP_TAB. My guess is certainly not. If I'm wrong, I want a way to grant select on a table in the schema of user1 immediately as and when it is created to User2.
Please suggest a solution.
Thank you and best regards,
Vipin Kumar Rai993280 wrote:
Knani,but in this case the User2 can choose any table in any schema. I want only USER2 for the right to select for only User1 tables.
Thank you
VipinOh sorry. Misinterpreted your post. What you did is the right way to do it. You must add the select role privilege whenever you create a new table. There is no "SELECT the TABLE all THE" specific to a type of data user privilege.
-
What privileges granted to select from all the PDB files
Why the two selected does not return the same result? Or if you want the broader question - what privileges granted to select from all the PDB files.
I want to leave common user that I created to select and see all of the synonyms of all PDB files.
conn / as sysdba
create user c##nir identified by c##nir container=all;
grant connect,dba,resource to c##nir container=all;
grant select on cdb_synonyms to c##nir container=all;
select CON_ID from cdb_synonyms group by CON_ID;
CON_ID
----------
1
4
11
10
14
5
8
13
3
7
15
6
12
9
conn c##nir/c##nir
select CON_ID from cdb_synonyms group by CON_ID;
CON_ID
----------
1
select CON_ID from containers(dba_synonyms) group by CON_ID
*
ERROR at line 1:
ORA-00942: table or view does not existYou must use the CONTAINER_DATA clause:
ALTER USER ##nir set container_data = container c all = current;
After running the above command, try to select again to cdb_synonyms and you will see the data of all containers.
Read more in my Post of Blog
-
List of all the roles a user belongs
Hello
I want to get a list of all the roles to which a user belongs with OIM 11 g APIs.
oracle.iam.identity.usermgmt.api.UserManager
oracle.iam.identity.rolemgmt.api.RoleManager
A code example will be very useful.
Thank youfor the time being, use "*" instead of ConstantsDefinition.WILDCARD and move forward
-
How to give the right to select for all objects of schema?
Hello
We have a lot of users and schemas.
A user wants to execute 'select' for all tables in the other schema.
For example: TEST user wishes to select the objects to TEST2. Test2 have hundreds of tables, TEST user cannot select other schema objects, so I don't want to give SELECT ANY TABLE privileges.
How can do this at once? is it possible to give all the objects schema once subsidies?
DB versin. 9.2.0.8
greetings and thanksNo, there are no subsidies. You must use hundreds of statements of grant.
However, you can use dynamic SQL to do this automatically, i.e.
CREATE ROLE test2_select; BEGIN FOR x IN (SELECT * FROM dba_tables WHERE owner='TEST2') LOOP EXECUTE IMMEDIATE 'GRANT SELECT ON test2.' || x.table_name || ' TO test2_select'; END LOOP; END: / GRANT test2_select TO test;
Justin
-
Granting select permission on the view to the schema of the database different.
Dear all
I need schema view 'data_model_eb' APPS to grant select permission on a different database schema "HHS" on another server.
Kindly help me to create the link to the db and grant the select permission.
Thank you.You have two solution, but I think the second One is the best for you, what is your version of the database!
create view
as select * from table_name@dblink grant select on to USER; OR create a PUBLIC database link
-
Grant select privilege on the table column
Hello
I think that it is not possible to give the right to select level of column in a table.
by example-grant select (col1, col2) on table1 to User1;
Can anyone suggest what might be the way to achieve (apart from creating a view on the table).Hi, Anit,
Anit says:
Hi Frank,.
Thanks for the reply. Nothing bad to see.Then use a notice. It is simpler and more robust.
As that I knew WHAT EVP is used for the column data hide with a null value or other values. do not hide the entire column of the selection operation. Please correct me if I'm wrong.
Maksing the column with a null value or another value is hide the column.
Do what you should always do whenever you have a question. Post some sample data (CREATE TABLE and INSERT statements) and the results desired from these data. In this case, after an authorized user (that is, a user with all privileges) must get results and results that a user with lesser forge privileges.A view (or a copy of the table, as a materialized view) is the only way I know to prevent users to know that there is a column (for example) called credit_card_num.
Use row-level security, you can return NULL when users not allowed to reference credit_card_num, or you can trigger an error if they try to refer to this column. -
Grant select on all of the views to the public
How to tune the selection on the all views to the public? Thanks in advance.782150 wrote:
How to tune the selection on the all views to the public? Thanks in advance.spool doit.sql select 'grant select on '|| owner || '.' || view_name || ' to public;' from dba_views; spool off
run doit.sql
That's how it's done. Whether or not it is wise is a different matter.
-
Grant 'select only "on the basis of data
Hello
10.2.0.2 Dim.
I want to give a user with "Select any object in the database"
Thank you
KSG>
I am also finding an alternative path to the query below. (since there are more than 100 patterns and n number of objects) ("grant select on any table of" is not a best choic)
>
You are the only person who can assess your security needs.But if you want to exercise a positive security measures do not TAKE SHORTCUTS. This means put in place restrictions known on well-known objects and not grant on a table or an object and any grants a single user or super role.
Aman and others have already said a good security refers to the compartmentalization and a rigid hierarchy. The objective of the implementation process and standards is not to make developers work more easier or faster. Yes - do the work correctly on 100 patterns and a large number of objects in each scheme will be tedious. You can automatically generate basic subsidies and coil them to scripts. But don't try to automate the entire process from beginning to end. That will leave large enough for a bus through security holes.
Create a hierarchy in the sense of
1. a schema at a time
a. purpose of subsidies - for tables, views, procedures, etc. to a role. Best is to use a separate role for each type of object
2 grant the role of schema for users who needBuild small pieces manageable and controllable. Then combine these pieces into a top-level component. Not just make a huge mess of subsidies.
-
I love the old version of Firefox, because I REFUSE to use my computer without Kaspersky. I have it? > Kaspersky is MORE important for me than Firefox (G.Chrome is my backup)
Now I have KIS 2016 and I love its hexagonal icon, showing attempts it is blocking (it is set to block). Firefox 3 times now DELETED this icon, but shows that the Protection of Kaspersky is always an active add-in. I had to uninstall KIS 2016 3 times to return to this icon. When I click on the gear to select the background choice 'Reset all the Add-ons to update manually', nothing happens. No check mark shows, in Options / Advanced, I chose never "check updates". I'm tired of wasting my time to re - install KIS 2016 to get back on this icon. About: config I have enabled FALSE app.update.auto, app.update.enable and app.update.silent. What can be done in addition to the removal of Firefox? (I'm NOT going to install latest Firefox because it is incompatible with KIS).
You are using a version of Firefox that is very old, please upgrade to the latest version of Firefox updated to the latest version. Kapersky drops support for older versions of Firefox, so if you do not update you may encounter problems in the strange, not to mention many security bugs in older versions of Firefox.
Then, make sure that you use the latest version of Kapersky and then use controls, buttons and Toolbars Customize Firefox to add the icon of kapersky on toolbars of Firefox.
-
Select Auto all the photo for export
Hi, I would to code so that lightroom automatically select all the photo before an export so you have no manual select all photos.
How do I do that?
Thank you
BR,
Fovitan
You can launch exports without anything selected, but if you really want to select them, call:
Catalog: setSelectedPhotos
(Note: catalog.kAllPhotos is the recommended way to access the all-photos from Lr3 collection)
R
-
Select / download all the files associated with a model?
Is there an easy way to select all the files that are associated with a particular model? It's fine that DW allows me to update all the files locally, but I am really surprised that there is no way (that I found) to select all the files that are associated with a model. In my case, I have a .html about 50 files stored in a folder and only 20 of them associated with a specific model. When I change the template (and therefor all files associated), I currently have to choose through my list of 50 files for 20 files I want to download. I was wondering if there is an easier way to do this in DW?
Thank you all. :)Right-click on your root folder and select 'synchronize' DW will search
through all your files the remote, and then download one that have been
has changed.It will first give you a dialog box to all files that it believes need download
and you can check whether you want to or not. You can also check the "Delete".
all the files not on the local site box"to clean the remote site if you
remove anything locally."nic.stage" wrote in message
News:eitiat$JLA$1@forums. Macromedia.com...
> Is there an easy way to select all files that are associated with a
> individual
> model? It's nice that DW allows me to update all the files locally.
> but I'm
> really surprised that there is no way (that I found) to select all the
> the
> files that are associated with a model. In my case, I had about 50
> .html files stored in a folder and only 20 of them associated with a
> specific
> model. When I change the template (and therefor all files associated).
> I
> currently are to choose through my list of 50 files for 20 files I have
> want to
> to download. I was wondering if there is an easier way to achieve
> in DW?
>
> Thank you all. :)
> -
Lack of 'point of selection' in all the layers in the layer menu.
As in Adobe Illustrator appairs a point in the active layer then an object is selected.
In my Indesign layers these 'points of selection' color is missing. Yesterday, they were there, and now they are gone?
Y at - it a shortcut to get back them?
Help, please
I could not re - create the problem. Maybe you should trash preferences?
-
boxes to be filled or selected on all the web sites, are the invisible state.
I blindly navigate the web page until I hit a place where I can insert a name etc. or blindly, click in the General area to present something. The work of hypertext links, but I don't see them. what I did: resett FF; empty the caches and cookies; Unchecked hardware accelerated; update of the modules; Run malwarebtes; followed the instructions to exit safe mode.
Have you checked the Windows accessibility settings?
-
Allows you to Grant Select, insert and update 10.2.0.4.0
Hello
I observed an unusual reflection in our database (version 10.2.0.4.0)
We have 2 diagrams. Schema 1 has all the objects. We created synonyms for some specific Schema2 objects and have granted select privileges on the tables and execute on procedures and packages.
While playing (in dev scheme of course), I found that I can update and insert records into tables having "Select" privilege only. I checked user_tab_privs_made schema1 and schema2 for this table user_tab_privs_recd, and in two places, it is show privilege as "Select". I checked a few other tables as well with the same results.
It's very strange and I would like to know if any of you have experienced this problem. Is this a bug?
Enjoy your entries.
Thank you
ATI did check the sys privs in the IMP_FULL_DATABASE role and found there:
UPDATE/INSERT no matter WHAT TABLE, but it is not DELETE ANY table. This is why the 2nd scheme user can upgrade AND INSERTION using synonyms on the tables belonged to the 1st scheam user. Hemant was right.
PRIVILEGE
COMPREHENSIVE REWRITE
CREATE ANY ORDER
CREATE PUBLIC SYNONYM
CREATING A CLUSTER
SELECT ANY TABLE
ALTER ANY TABLE
ADMINISTER THE DATABASE TRIGGERS
CREATE A LIBRARY
CREATE ANY DIRECTORY
CREATE PROFILE
CREATE A TRIGGER
REMOVE ANY SYNONYM
REMOVE ANY INDEX
DROP ANY CLUSTER
DELETE A TABLE
DROP TABLESPACE
CREATE ANY DIMENSION
DROP ANY DIRECTORY
DROP ANY TRIGGER
REMOVE ANY VIEW
CREATE A VIEW
INSERT A TABLE
CREATE A TABLE
ADMINISTER THE RESOURCE MANAGER
DROP AN INDEXTYPE
DROP ANY OPERATOR
DROP ANY LIBRARY
CREATE PUBLIC DATABASE LINK
CREATE AN INDEX
COMMENT BY ANY TABLE
DROP ROLLBACK SEGMENT
CREATE ANY SQL PROFILE
RECOVERY POSSIBLE
EXECUTE ANY TYPE
EDIT A TRIGGER
ANY AUDIT
DROP PUBLIC DATABASE LINK
CREATE A SYNONYM
DROP ANY PROFILE OF SQL
DROP ANY CONTEXT
MANAGE QUEUES
CHANGE ANY TYPE
REMOVE ANY MATERIALIZED VIEW
CREATE A MATERIALIZED VIEW
ANALYZE A
RUN A PROCEDURE
CREATE THE ROLLBACK SEGMENT
CREATE TABLESPACE
DROP ANY SCHEMA
DROP ANY DIMENSION
CREATE ANY OPERATOR
DROP ANY TYPE
CREATE ANY TYPE
CHANGE ANY PROCEDURE
CREATE A PROCEDURE
DROP ANY ROLE
DROP ANY ORDER
DROP PUBLIC SYNONYM
BECOME A USER
CREATE ANY CONTEXT
CREATE AN INDEXTYPE
DROP PROFILE
DROP ANY PROCEDURE
CREATE THE ROLE
CREATE THE DATABASE LINK
UPDATE ANY TABLE
DROP USER
CREATING USERPublished by: Kevin_K on April 2, 2009 08:54
Maybe you are looking for
-
Question about preinstalled Microsoft Office 2007
I don't know what subject im talking - this pc was again this year and they gave me a code to activate product for this how the above has now expired - get a new one?I didn't do anything at all without that happens? Someone said that you can get anot
-
need help to update OSX version 10.8.5 MacBook; 2.9 GHz intel core 17, 8 GB 1600 MHZ; confuses many - I'm technically phobic since getting warnings about the updates of other users.
-
Capture a sample only after analog triggering on a PXI4461 in Labview SignalExpress
-Repost on LabView forum where this thread belongs. Hello I capture two waveforms (external excitations) with my PXI446, one on each HAVE. I use one of them as an analog trigger (rising edge @ some tension), let's say AI0. I need the value of AI1 on
-
Call from Microsoft Security, is it a scam?
I got a call from "Microsoft Security", informing that my computer has been hacked and tried to get me a "pin" entry that they would provide. When I wondered where they were on they notify that they were "security for Microsoft" I didn't responded an
-
A security update cumulative for Internet Explorer 8 for Windows Vista (KB969897)
A security update cumulative for Internet Explorer 8 for Windows Vista (KB969897)It's the new and important update on the 09.06.2009.I tried to install, an error code 80070570 appeared... How can I get this facility because it is under the status of