Green vertical lines / tracks audio FX of detachment and the music of the video clip

Similar Questions

• When I open computer on my desk about 70mm from the right side, there is a thin green vertical line

  Toshiba Satellite laptop computer, and when I open computer there is a thin green vertical line on my desk about 70mm from the right side. Is it possible that I can eliminate this myslf with your help or I will have to consider a locally recognized it professional?

  Please notify.

  Considers that Vicki.

  PS., appears not to hinder the performance of the computer. Computer is about 7 years old and running Windows Home.

  That looks like it's simply damage to the monitor.

• I have pale green vertical lines on my iMac 27 "

  I have Pale on my iMac 27 "early 2009 when green vertical lines startup and after a minute or two, the screen becomes grey.  This means my Mac died?

  I tried to start both the recovery disk and my backup time machine, does not

  Hello Fernbergjim,

  I see that this problem is originally a drawback to the use of your iMac. This question most likely has something to do with the internal parts of your iMac. You may be able to make an Apple store to pay compensation in addition to the right of your country's consumption (depends on your country).

  This problem would be better fixed during the inspection by adopting it an Apple Store. If you have additional questions, do not hesitate to ask

  Best regards

  James

• Green vertical line on screen - Satellite P30 Pro

  A single thin green vertical line appeared about a sixth of the way across the screen. It works up and down continuously and immediately displays the screen is activated.

  I presume that this indicates a hardware failure - can anyone confirm please? Guess I'm interested in large bills?

  Hi Ian

  How is - someone must provide an exactly fault diagnosis without putting the hand on this laptop?
  Here, we can suggest and discuss only!

  If she really looks like a hardware problem, but the question is; What s wrong.
  In my opinion, you must connect the external monitor to the laptop. Check if the same vertical line appears on the second screen!

  If Yes, then the chances are high that the graphics card is broken! This could be a case value because the GPU is soldered on the Board and the entire motherboard must be replaced to solve this problem.

  Concerning

• Qosmio G15: Green vertical lines on the screen

  All started an ordinary day, when I was playing music on my iTunes.
  All of a sudden my screen went black and the music stopped, but my power button is always blue. Since then, whenever I try to start it, it goes on the Qosmio screen and Windows XP screen and plays the startup sound, but there all those green vertical lines on the screen. And then it goes black and tsays in this way.

  I was able to use Windows VGA (whatever that means) with lines all over the screen, but I am not able to start normally. Does anyone have any suggestions or have had the same problem? Please help me!
  I have a Toshiba G15 Windows XP Media Center, but am not able to use it normally.

  -Alexis

  Hello

  You can enter operating system in SafeMode using F8 t the beginning upward?

• Green vertical lines then white screen on Qosmio F10

  My Toshiba Qosmio F10 primer is more. When it is on, the windows logo appears and the screen green vertical lines before going completely blank. The screen remains blank for about 5 minutes, then the laptop starts to restart. It justs goes on and so forth.
  No one knows what the problem is and now the laptop is out of warranty, cost for repair, or it is not profitable and it would be cheaper to buy a new laptop?
  Thank you
  Mike.

  Hey Buddy,

  Unfortunately ' unfortunately it seems that this defect is caused by component defective equipment.» It could be that the motherboard together that cost to a service center about 400 European must be replaced. (New card mother and Exchange)
  You can also try to clean your cooling system with a can of compressed air to remove dust which could probably cause the error, also.

  If you really want to give your machine for repair, then follow this link and find nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Green vertical line on monitor on Satellite A80

  I have a SA 80 127. Is it 1.5 years.
  Recently, a bright green vertical line appears on my monitor; Looks like a LCD issue.
  Does anyone have clues that I have to do?
  Thank you...

  Best
  knockaert

  To be 100% sure test with external monitor. If this line is displayed on LCD only you should contact the service in your country. If the display is faulty, it should be replaced.
  The warranty is still valid?

• The CC icon on my desktop has a blue disc with two vertical lines in it. When I open the Panel, it is completely empty?

  The CC icon on my desktop has a blue disc with two vertical lines in it. When I open the Panel, it is completely empty? How can I access the apps?

  The solution seems simpler than city above: reinstall the creative Cloud application. When he finally set in the Finder (Mac) you ' he's opinion - down under - that "synchronize file is paused. Click on the small triangle on the right and the problem is solved - or it was for me.

  Concerning

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• Audio is not synchronized with the video in Encore

  When I try to create a Blu - ray disc in Encore, with files mp4 that were imported in the timeline, the audio is not synchronized with the video.  These same files are fine when I import them and create a DVD with still.  I tried to convert the files with Adobe Encoder, but that does not work.  I tried their conversion to "high quality, even as attributes Original 720 x 480.  Mp4 files are which have been digitised in iMovie VHS tapes.  These files to play correctly in all other circumstances.  Does anyone know the settings I need to set to make these files to play properly when you try to import them in again to ensure their conservation in Blu - ray?  I have over 300 converted videos and I will not be able to detach the audio from the video and try to slide things around them to match for each video.  I guess that there must be a simpler solution.

  We don't know what audio specifications are in mp4. Still prefer active already demuxed import (m4v and wav or a3c). Otherwise, he must separate the flow before Remultiplexage in the m2ts file. Take a short test. Put a mp4 to first and export it as H.264 Bluray. You can change the baud rate (for the test, I wouldn't), but do not change the multiplexing. You will get a m4v and wav. In still, "import calendar" the two files.

• Windows media player; I have a mpeg file played ok before the download Flash Player to move to another place; but now the audio wont play even if the video is very good

  I have a mpeg file played ok before the download Flash Player to move to another place; but now the audio wont play even if the video plays very well.  The mpeg file may was converted from another format mpeg before do me.

  Hello

  1. are you able to play the other mpegs successfully?
  2. what version of Windows Media Player do you use?

  I suspect that the file is corrupted.

  Method 1.
  Check if you can play the same video in a different media player.

  Method 2.
  You may need to check if the codecs work very well to play the file. Check if you have installed third party codecs. Uninstall them and re - install and then check.

  I hope this helps.

• I deleted from the temporary folder and now my microphone and camera do not work, the audio and the video hangs when activated

  C:\Users\John\AppData\Local\Temp and emptied, had like 20 GB of misc * in there, when I deleted it no error came, nothing has been locked. then when I didn't try to use my webcam (creative Webcam live pro v280) the audio and the video freezes as if taken in too much data to be processed during recording, and when I try to speak, it comes out as a big sound introduction text that's noise and videos recorded is accelerated as a 10 x. I bought a new webcam installed and everything went well, and exactly the same thing happened. (microsoft livecam this time) no sound. Anyone have any ideas?

  Hi Johnny,.

  Perform the System Restore to an earlier date and check if it helps.

  System restore

  System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.

  Hope this information helps.

• Green vertical line on E1914H

  A vertical green line (width in pixels) suddenly appeared on the screen. It is present with or without input from a computer. The monitor is around the age of three months. What is the next step? I tried to find some info contact with dell, but not luck.

  If the problem appears during self-test and built-in Diagnostics (pages 49-50), it is defective.
  * Back to the top of this Forum to monitor
  * Open, "My 24" or more small monitor does not have a Service tag? »

• Audio setting on the music and the video track separately?

  Hey everybody. I am a new user of first old clip and I didn't open the app on my phone for a while. I really appreciate all the new and improved features. One thing I had a lot of trouble to determine is if I could change the volume of a music track discreetly of the audio in the video track itself? Maybe I'm missing something obvious, but I played a bit with the audio settings and found them a bit confused.

  Thanks a lot for your time!

  -quin

  Hello Quin,

  Welcome to Clip you can both edit your soundtrack and audio video independently.

  To adjust the volume for your soundtrack, press the icon of music on the top of your screen. Once in the menu of the soundtrack, move the Volume slider to the desired level.

  To adjust the volume of a video clip, select the item in the sequence, press the speaker on the bottom of your screen icon. From there you can mute or increase or decrease the volume using the volume slider.

  I hope this helps!

  Best,

  Peter Garaway

• Audio out of sync with the video

  Hi I am new to animate... so far, I'm having a lot of fun with it. I ran into the first question that I have not been able to overcome.

  I recorded a voice over my my movie in another standard (Studio One) .wav file, the program and imported it into my library. Spent some time the vocal track and animation edition so everything aligns properly Animate. When I test the movie using the game control to animate everything syncs perfectly. When I test using ctrl + enter or publish the movie and play in my browser the audio and video is no longer online. The audio plays at the correct speed, but the video is about 10% faster, then it should be. Is equivalent to 5 seconds in a second animation 45. No idea what I am doing wrong?

  What rate and few sample depth was the WAV? Animate it is 44.1 KHz, 16-bit. If you use 48 kHz or 24-bit, you can run into trouble.

  If you use 44.1 KHz, 15 bits, you make a SWF file or is it HTML5 Canvas? With SWF, you can set the sound synchronization on the Stream, and the graphics and the sound will keep in sync. If it's HTML5 Canvas he uses the event sync, and if your animation is demanding, it will go out of sync.

  There are ways to use Javascript to stay in sync. Something like that in frame 1 of the animation:

  var starttime is createjs. Ticker.getTicks ();

  createjs. Ticker.setfps(25) (24); the 24 would be different if your pace is something else

  this.addEventListener ("tick", movealong);

  var self = this;

  This.Stop ();

  function movealong() {}

  var = now createjs. Ticker.getTicks ();

  self.gotoAndStop (Math.floor (now-starttime));

  }